Bắt đầu

Patterns

XRS Swing Failure Patterns + AlertsXRS Swing Failure Patterns + Alerts is a modified version of the original LuxAlgo Swing Failure Pattern script. The original SFP detection logic is credited to LuxAlgo. This XRS version keeps the core swing failure pattern concept while adding small modifications, styling adjustments, and dedicated alert conditions for multiple timeframes. This indicator identifies bullish and bearish Swing Failure Patterns, where price sweeps a prior swing high or swing low and then closes back through the level. These patterns are commonly used to identify potential liquidity sweeps, failed breakouts, stop runs, and reversal areas. Features include: • Bullish and bearish SFP detection • Swing length customization • Optional volume validation • Optional lower-timeframe volume validation • Swing lines • Confirmation lines • Swing failure wick markers • SFP labels • Optional dashboard • Alerts when an SFP prints on 1m, 5m, 15m, 1h, 4h, and 1D timeframes This version was modified by XRStrading / chasingkilowatts to make the script better suited for discretionary trading workflows, especially for traders who use liquidity sweeps, session highs/lows, VWAP, order flow, and auction-market concepts. Original Author: LuxAlgo Modifications: XRStrading / chasingkilowatts This script is based on original LuxAlgo work and remains subject to the original attribution and license terms. Disclaimer: This script is for educational and informational purposes only and does not constitute financial advice. Trading involves risk. Use at your own discretion.
Chỉ báo Pine Script®
của xrstrading
Strong Geometric Patterns Engine | ProjectSyndicateStrong Geometric Patterns Engine automatically detects, validates, and grades nine classic chart patterns using an objective, non-repainting geometry engine. It confirms every signal on a breakout close, projects adaptive measured-move take-profit and structural stop-loss levels scaled to Average Daily Range (ADR), scores each setup 0–10 for quality, and presents a full statistical breakdown on a non-intrusive dashboard to provide a quantifiable edge. 🧠 9-Pattern Geometric Detection — identifies Head & Shoulders, Inverse Head & Shoulders, Double Top, Double Bottom, Ascending / Descending / Symmetrical Triangles, and Rising / Falling Wedges from a non-repainting confirmed-pivot engine, so signals are stable and never redraawn after the fact. 🔒 Breakout-Confirmed, Non-Repainting — a valid shape only sets a pending setup; the signal fires exclusively when price closes through the pattern's trigger level, eliminating the subjective, repainting behaviour of standard ZigZag and pattern tools. 🎯 ADR-Adaptive Measured-Move TP/SL — TP1, TP2, and SL are derived from the pattern's own projected height (a true measured move), bounded by a percentage of the 10-day ADR, so risk and targets adapt automatically to any asset's volatility instead of using fixed points. ⭐ 0–10 Quality Scoring — every setup is graded on symmetry, convergence, and a volume confirmation bump, displayed as a star rating next to each signal so you can instantly gauge setup strength and filter for the best ones. 🎨 Direction-Matched Visuals — clean upward/downward entry markers, green bullish and red bearish labels, and crisp horizontal SL / TP1 / TP2 levels give instant visual confirmation of trade direction with no chart clutter. 📊 Full Performance Dashboard — a complete statistical overview including the real-time ADR10 value, the active/pending setup with its targets, total signals, TP1/TP2 win rates, a per-pattern breakdown across all nine pattern types, and a log of the most recent trade outcomes. ✅ Advanced Quality-Control Filters — user-configurable Pivot Length, equality/slope/convergence tolerances, min & max pattern span, measured-move bounds, and minimum bars between signals eliminate low-quality or oversized patterns and prevent over-signaling. 🔔 Comprehensive Alerts — get alerted the moment a new pattern is detected (pending), when price is approaching the trigger, when a setup confirms on the breakout, or only on strong high-score patterns. Available as a single rich alert() message (symbol, timeframe, trigger, invalidation, entry, SL, TP1, TP2, quality) for automation, plus six individually selectable named alert conditions. 🔧 Fully Customizable — control everything from pivot length and pattern-quality tolerances to colors, level extension, persistent historic levels & labels, adjustable signal label size, and dashboard text size. 🎯 Why this algo is unique: Standard pattern indicators repaint and offer subjective signals with no statistical backing. This is an objective, fully-gated, non-repainting engine that doesn't just draw a pattern — it recognizes nine of them from raw geometry, confirms them on a breakout, builds a complete adaptive risk framework (measured-move, ADR-bounded zones) around each one, grades its quality, and proves its historical performance on the very chart you're trading. 🚀 Apply to Gold (XAUUSD), Forex, Crypto, and Indices on any M5/M10/M15/M30/H1. The ADR-based, self-scaling geometry and extensive quality filters let it adapt to anything from M5 scalping to H4 swing trading. 🎯 How to use this? Use the dashboard to understand how each pattern type has recently performed on the current asset and timeframe. Favour higher-quality (higher-star) setups and those aligned with the higher-timeframe trend. Tune the pattern tolerances and measured-move multipliers to match your own risk tolerance and the asset's character. ⚠️ IMPORTANT NOTICE: This indicator is designed to identify statistically-backed pattern signals. It should NOT be used as a standalone signal for entering trades. Always use it in conjunction with your own trading strategy, price action analysis, and other technical indicators to confirm setups and manage risk.
Chỉ báo Pine Script®
của ProjectSyndicate
Takhtupuria Triple Candle Pattern Alert..5Takhtupuria Triple Candle Pattern Alert This professional-grade tool is designed to identify specific Triple Candle Patterns in the market. By highlighting these formations, the indicator helps traders spot potential trend reversals or continuations before they fully develop. Key Features: Automated Pattern Detection: Instantly highlights triple candle formations directly on your chart, removing the need for manual scanning. Visual Confirmation: Uses clear Bar Color changes to mark the specific candles that complete the identified pattern. Pane Labels: Integrated labels provide quick visual confirmation of the pattern, keeping your chart clean and easy to read. Real-time Alerts: Designed for speed, perfect for scalpers and intraday traders who need to react quickly to price action. How to Use: Style: Customize the Bar Color to highlight patterns in a color that stands out against your chart background. Precision: Toggle the Pane labels to keep your workspace clutter-free while still receiving vital pattern data. Strategy: Combine this with other trend-following tools to confirm if the detected pattern aligns with the overall market direction. Designed by Takhtupuria to bring advanced price action analysis to every trader's arsenal.
Chỉ báo Pine Script®
của hundredmilliondoller
Candle Pattern FinderThis indicator searches historical price data to find candle sequences that most closely resemble a recent pattern. It compares the shape of a configurable number of recent candles against hundreds of historical windows using z-score normalization; focuses on the shape of the move rather than price level. The three closest matches are identified and highlighted directly on the chart. Once the matches are found, the indicator projects forward from each one, showing how price behaved in the bars that followed. The three individual paths are drawn in lighter lines, while a weighted consensus of all three is drawn prominently in orange. A percentage label at the end of the consensus line shows the projected move from the pattern's anchor price. Optionally, consensus can be disabled and only the closest matching pattern will be displayed. A pattern offset control lets you shift the examined window back in time. With an offset of zero the indicator analyzes the most recent candles as normal. Increasing the offset slides the pattern window back by that many bars, with the projection lines shifting back to match — useful for visually checking what the indicator would have predicted at a specific point in the past and whether that prediction played out. The indicator is fully configurable: pattern length, lookback depth, projection length, and all colors can be adjusted from the settings panel. Match regions are highlighted with shaded boxes so you can quickly locate in history where the matched patterns occurred. This is just a tool that displays similarities, and should not be relied upon as an accurate prediction of future movement.
Chỉ báo Pine Script®
của obsirk
Liquidity Sweep Indicator [Income Statement]Liquidity Sweep & Reversal Detector This indicator is built around a specific market structure concept: liquidity sweeps (also called stop-hunts), where price temporarily violates a known swing level to trigger resting orders, then immediately reverses back inside range. That failed breakout is the signal, not the breakout itself. The three filters are not independent features — they are a deliberate confirmation stack designed to answer one question: is this reversal likely to be institutional, or is it retail noise? HOW THE LOGIC WORKS 1. Swing Structure (Pivot Detection) The script continuously tracks the most recent confirmed pivot highs and lows using a user-defined lookback period. These pivots represent visible liquidity pools — price levels where stop-loss orders from trapped traders are clustered. 2. The Sweep Condition A bullish sweep is confirmed when: (a) the current bar's low dips below the most recent pivot low, and (b) the bar closes back above that level. This closing behaviour is critical — it distinguishes a genuine stop-hunt from a continuation breakdown. The reverse applies for bearish sweeps. A minimum sweep depth (%) filter prevents the script from triggering on negligible edge-grazes. 3. Volume Confirmation (Smart Money Filter) Institutional absorption of liquidity typically produces above-average volume. The script compares the sweep bar's volume against a 20-bar simple moving average and requires it to exceed a configurable multiplier (default 1.7×). This single filter eliminates the majority of false positives generated by low-liquidity sweeps in off-hours or thin markets. 4. EMA Trend Alignment To avoid taking counter-trend reversals in strong momentum environments, an optional EMA filter restricts bullish sweep signals to bars closing above the EMA, and bearish sweep signals to bars closing below it. This transforms the detector from a range-bound tool into one that works across trending and ranging conditions. 5. ATR-Based Targets Take Profit levels are calculated as a multiple of the 14-period ATR from the close of the sweep bar. Because ATR is normalised to the instrument's volatility, the same multiplier setting produces sensible targets across assets with very different price scales — stocks, crypto, forex, and commodities. Targets are displayed in the asset's native tick precision using syminfo.mintick. SETTINGS GUIDE Swing Length (2–20): Controls the pivot lookback. Lower values (2–5) detect intraday liquidity pools; higher values (10–20) track significant swing highs/lows on higher timeframes. Minimum Sweep % : Sets the minimum wick penetration beyond the pivot before a sweep is considered valid. Prevents false signals from minor wicks that barely exceed the level. Volume Multiplier : Sweep bar volume must exceed this multiple of the 20-bar average. Increase for stricter institutional confirmation; decrease in lower-volume instruments. EMA Length & Trend Filter Toggle : The EMA acts as a macro regime filter. When enabled, it restricts signals to the trend direction. Disable it in ranging/mean-reverting markets. ATR Target Multiplier : Scales the Take Profit distance relative to recent volatility. 1.5 is a balanced default; tighten for scalping, widen for swing trades. USAGE NOTES This indicator works best when sweep signals align with additional confluence — for example, a bullish sweep occurring at a higher-timeframe support zone, a Fair Value Gap, or a daily demand area. The script does not predict reversals; it identifies the structural conditions under which reversals statistically have higher probability. Always use proper risk management and do not rely on any single indicator in isolation .
Chỉ báo Pine Script®
của Income_Statement
Bolsacava Stats FunOntheRide Educational indicator created by Fun on the Ride / CryptoNews. This script was built as a learning exercise after watching a public video by Bolsacava, where several intraday ideas about the E-mini S&P 500 futures contract (ES1!) were discussed. The purpose of this publication is not to claim ownership of those ideas, impersonate Bolsacava, or present this as an official Bolsacava tool. It is an independent educational Pine Script project designed to show how recurring market claims can be translated into measurable statistics using 30-minute ES1! bars. The goal is simple: learn, test, and verify. Instead of assuming that a pattern works because it is often repeated, this tool checks how frequently it has actually occurred across recent historical sessions. What the indicator shows The script displays a compact on-chart table with the historical hit-rate of each pattern across three rolling windows: - 20 sessions: short-term behaviour - 60 sessions: medium-term context - 120 sessions: broader baseline This allows traders to compare whether a pattern is currently persistent, fading, or highly dependent on the selected sample size. Patterns audited The indicator tracks five ES1! intraday hypotheses: H1 — Range-bound open between 15:30 and 17:00 Madrid time H2 — Sell-off around the European close, from 17:00 to 18:00 H3 — Low-volatility window between 18:00 and 21:00 H4 — Volatility expansion between 20:00 and 21:00 H5 — Last-hour directional drift from 21:00 to 22:00 All times are referenced in Madrid local time. The calculations are based on bar timestamps and defined intraday windows. Optional filters The script can also recompute the statistics on a cleaner sample by excluding sessions affected by potentially anomalous events: - CPI release days - FOMC meeting days - Extreme sessions, defined by unusually large range or volume Comparing filtered and unfiltered results helps reveal whether a pattern is robust across normal sessions or mainly supported by outlier days. How to interpret it A higher percentage means that the pattern occurred more often within the selected rolling window. This indicator does not provide buy signals, sell signals, stop-loss levels, take-profit levels, or position sizing. It is not a trading strategy. It is a statistical screener designed to help traders test market narratives before using them as decision-making inputs. Important notes - Built for CME_MINI:ES1! on the 30-minute timeframe. - Results may not translate to other symbols, sessions, or timeframes. - The development sample covered approximately 600 historical sessions. - Hit-rates will change over time as new sessions enter the rolling windows. - Past frequency does not imply future reliability. Attribution note This is an independent educational project by Fun on the Ride / CryptoNews, inspired by a public Bolsacava video. It is not affiliated with, endorsed by, or officially published by Bolsacava. The aim is to learn Pine Script, practice statistical thinking, and explore how trading narratives can be tested with data. Disclaimer This script is for educational and statistical research purposes only. It is not financial advice, does not recommend any trade, and makes no claim of profitability. Open-source publication The code is open-source so that users can inspect the logic, verify the calculations, adapt the hypotheses, and suggest improvements.
Chỉ báo Pine Script®
của FunOntheRide
Ask Dr. Alex AIAsk Dr. Alex AI — Interactive Chart Intelligence for TradingView Ask Dr. Alex AI is an interactive chart intelligence indicator built to help traders understand what the chart is saying before making a decision. Instead of only printing a simple buy or sell label, Ask Dr. Alex AI lets the user select a question from a built-in menu and then reveals the specific chart evidence behind the answer. This indicator is designed as a guided market assistant for traders who want clearer context around support, resistance, patterns, momentum, trend pressure, forecast bias, and trade planning. What Makes Ask Dr. Alex AI Different Most indicators only show signals. Ask Dr. Alex AI answers questions. Users can select from guided questions such as: Is this safe to trade right now? Am I buying from support, selling from resistance, or chasing price? What pattern is active? What does the next candle / 10C forecast suggest? What is the entry, stop loss, and take-profit plan? ALL — Show Everything Deep Scan Mode When a question is selected, the indicator highlights the relevant chart areas and summarizes what it sees using the Dr. Alex AI answer panel. Core Features Interactive Question Menu Choose a question and the indicator reveals only the relevant chart evidence. Dr. Alex AI Answer Panel Provides a plain-English summary of the current market condition. Deep Scan Mode Unlocks deeper diagnostic checks such as: Trend Strength MTF Agreement Support Bounce Check Resistance Rejection Pattern Quality Forecast Conflict Ribbon Conflict Entry Quality Risk / Reward Invalidation Point Fakeout Risk Wilson Tangent Full Diagnostic Support / Resistance Intelligence Displays major support and resistance zones, higher-timeframe levels, and whether price is reacting from a meaningful area. Pattern Awareness Detects and explains major active patterns such as doji at support, hammer at support, double bottom, engulfing candles, marubozu candles, breakout retests, traps, and continuation patterns. Respect Support Bounce Mode When price touches major support and a bullish rejection pattern appears, the system can shift from hard bearish continuation into Support Bounce Watch / Bull Watch instead of blindly forecasting into support. Next-Candle Bias Ribbon A five-state visual ribbon helps summarize the projected next-candle condition: Green = Bullish Blue = Bull Watch Gray = Neutral Orange = Bear Watch Red = Bearish 10-Candle Forecast View Shows a forward projection path based on confidence, pattern context, support/resistance, trend pressure, and active sentiment. Trade Plan Panel When a setup is active, the indicator can display: Entry range Stop loss TP1 TP2 Risk/reward model Setup status Confidence and Rank Engine Uses a multi-factor scoring system to compare bullish and bearish pressure across trend, momentum, structure, volatility, MTF alignment, candle behavior, and ribbon state. Machine-Learning-Inspired Scoring Logic Ask Dr. Alex AI uses adaptive, weighted, machine-learning-inspired decision logic to evaluate chart conditions and adjust the way it interprets support bounces, forecast conflicts, momentum shifts, and pattern quality. It is designed to behave like an intelligent diagnostic layer, not just a static signal generator. How to Use Add the indicator to your chart. Choose a question from the Ask Dr. Alex AI menu. Review the highlighted chart evidence. Read the Dr. Alex AI answer panel. Use Deep Scan Mode when you want a more detailed diagnostic breakdown. Use ALL — Show Everything when you want the full visual system displayed at once. Best Use Case Ask Dr. Alex AI is best used as a decision-support and educational chart assistant. It is built to help traders slow down, identify context, avoid chasing price, respect support/resistance, and understand why a setup is active, weak, conflicted, or invalidated. It is especially useful for traders who want the chart to answer questions such as: “Is this actually a trade, or am I forcing it?” “Is price bouncing from support or breaking down?” “Why is the forecast bullish if the trend is bearish?” “Why is the signal waiting?” “What must happen before this setup becomes valid?” Important Disclaimer Ask Dr. Alex AI is for educational and informational purposes only. It does not guarantee profits, predict the future with certainty, or replace personal judgment, risk management, or professional financial advice. Trading involves risk, and users are responsible for their own trading decisions.
Chỉ báo Pine Script®
của DrLexWilson
13
Candle Rejection Quality Planner [AGPro Series]Candle Rejection Quality Planner 🧠 Core Idea Is the rejection candle strong enough to create a valid planning context, or is it only a noisy wick? 📌 Overview / What it does Candle Rejection Quality Planner is a chart-first rejection candle decision tool designed to evaluate wick-led rejection without turning the chart into a generic candlestick signal map. The script identifies bullish and bearish rejection candles, scores their quality from 0 to 100, then tracks what happens next through a confirmation rail, failure edge, target-room guide, wick quality zone, compact labels, alerts, and a clean AG Pro planning panel. It does not predict future price movement, automate entries, print buy/sell commands, or replace broader market context. Its purpose is to help traders judge whether a rejection candle has enough structure to deserve attention. 🎯 Purpose & Design Philosophy This script was built to fill the gap between simple wick markers and broader reversal systems. Many traders can see a long wick. The harder question is whether that wick has enough close quality, candle range, participation, and follow-through potential to become useful context. The design supports a planner mindset: evaluate the candle, define the confirmation level, know where the idea weakens, and wait for the next state instead of reacting to every wick. ⚡ Why This Script Is Different Most tools focus on detecting a named candle pattern such as a pin bar, engulfing candle, or generic rejection marker. This script does NOT clone Pin Bar Quality Filter, Engulfing Candle Quality, Rejection Block Quality, order block logic, liquidity sweep logic, or a broad candlestick scanner. Instead, it focuses on the planning process after a rejection candle appears: quality score, confirmation rail, failure edge, target-room guide, and next-action state. The candle is not treated as an entry by itself. It is treated as a context that must prove itself. ⚙️ Methodology 1. Context Detection The script measures candle range, upper wick, lower wick, close location, and relative volume to detect wick-led rejection context. 2. Reference Mapping When a qualified rejection candle appears, the planner maps a wick quality zone, confirmation rail, failure edge, and target-room guide. 3. Reaction Evaluation The model updates the 0-100 Rejection Quality score as confirmation develops, pressure works against the candle, time passes, or price reaches the planning guide. 4. Visual Output The chart displays the wick zone, rail, guide lines, controlled labels, candle tint, alerts, and AG Pro panel. 🗺️ How to Read the Chart Zones = the rejected wick area of the qualifying candle. The zone is a candle-quality reference, not a support/resistance map. Labels = rejection context, confirmation, failure edge breaks, target-room completion, and sparse active-state markers. Colors = teal supports bullish rejection context, pink marks bearish rejection or failure pressure, yellow marks caution, and indigo marks confirmation review. Panel = a compact decision view showing Candle Side, Rejection Quality, Confirmation, Failure Risk, and Action. 🚦 Signals & States • Bullish Rejection → lower wick rejection with stronger close location and sufficient quality. • Bearish Rejection → upper wick rejection with weaker close location and sufficient quality. • Awaiting Confirmation → a qualified rejection exists, but price has not accepted beyond the rail. • Confirmed → price accepted beyond the confirmation rail. • Failure Edge Broken → the rejection context lost its defined failure edge. • Target Room Reached → price reached the planning guide mapped from the rejection context. 🔔 Alerts Logic Alerts can trigger when a qualified rejection candle opens a new context, when confirmation rail acceptance appears, when the failure edge breaks, when target room is reached, or when the active planner state changes. Alerts are attention markers. They are not trade instructions and do not imply a guaranteed outcome. 🧩 Confluence Logic The strongest planner states appear when wick dominance, close location, reasonable candle range, supportive volume, and confirmation beyond the rail align together. When those elements are weaker or delayed, the planner shifts toward monitor, weak confirmation, expired context, or invalidated state. 📊 When to Use • Price-action review around visible reaction candles • Liquid symbols where candle range and volume are readable • Intraday or swing charts where wick rejection can be evaluated with ATR context • Discretionary planning workflows that need confirmation and failure references ⚠️ When NOT to Use • Extremely low-liquidity symbols with unreliable candles • Very noisy low-timeframe charts where wicks appear randomly • News spikes where candle range is distorted • Situations where broader market structure is being ignored 🎛️ Key Inputs • Sensitivity → changes how selective the rejection engine is. • Minimum Rejection Quality → sets the 0-100 score required before a context appears. • Dominant Wick Share → controls how much wick dominance is required. • Close Location Quality → controls how strongly price must close away from the rejected wick. • Confirmation Window → controls how long the script waits for follow-through. • Failure Edge Buffer → defines the invalidation reference beyond the rejection wick. • Target-Room Guide R → draws the planning guide from rejection close to failure edge distance. • Visual settings → control zones, rails, labels, candle tint, panel location, panel theme, and font sizes. 🖥️ Interface & Visual Design The interface is intentionally compact and chart-first. The wick quality zone keeps attention on the candle that created the context. The confirmation rail and failure edge create a structured review path. The AG Pro panel summarizes the current state without covering the chart with a broad dashboard. 🧪 Practical Usage Workflow 1. Read the panel and identify the active candle side. 2. Check the wick quality zone and confirmation rail. 3. Watch whether price confirms, weakens, expires, or breaks the failure edge. 4. Use the target-room guide as a planning reference, not as a promise. 🔍 Interpretation Guidelines A stronger score means the rejection candle has cleaner wick dominance, better close location, a more useful candle range, and stronger participation support. A confirmed state means price has accepted beyond the rail according to the script rules. A failed state means the active rejection context lost its defined failure edge. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a pin bar clone • Not an engulfing candle detector • Not a generic support/resistance or order block map ⚠️ Limitations & Transparency The script is rule-based and depends on candle structure, ATR, relative volume, and follow-through behavior. Different timeframes can change how rejection appears. Volatility spikes can distort candle range and failure distance. Symbols with unreliable volume may produce weaker participation readings. Outputs should always be interpreted within broader market structure, liquidity, volatility, and personal risk rules. 🧠 Market Context Notes Rejection candles often matter more when they appear near meaningful structure, after a directional push, or during a volatility expansion attempt. The script intentionally does not build a full structure map because its narrow job is candle rejection planning. 🧾 Use Case Examples When a candle prints a strong lower wick, closes high in its range, and then accepts above the confirmation rail, the planner may classify the context as ready for review. When a strong upper wick appears but price fails to move beyond the confirmation rail and later breaks the failure edge, the planner marks the context as invalidated. 🧱 System Philosophy AGPro Series tools are designed to convert visual market behavior into structured review states. This script follows that philosophy by turning a single rejection candle into a defined planning context with quality, confirmation, risk, and action fields. 🔐 Non-Promise Statement No script can provide certainty. No rejection candle guarantees continuation, reversal, or profitable execution. 📉 Risk Disclosure Trading involves risk. This script is for technical analysis and educational use only. Users remain responsible for their own analysis, position sizing, execution decisions, and risk management. This script does not provide financial advice or guaranteed trading outcomes. 📚 Educational Note Use the tool to study how rejection candles behave after they appear. The value is in structured observation, not automatic decision-making.
Chỉ báo Pine Script®
của AGProLabs
Morning & Evening Star Detector [SSFX]Morning & Evening Star Detector is an open-source candlestick pattern indicator designed to identify two classic 3-candle reversal formations: the Morning Star and the Evening Star. The Morning Star is a bullish reversal pattern that typically appears after bearish pressure. The indicator identifies it using a 3-candle structure: A strong bearish first candle A small-bodied middle candle, representing hesitation or loss of momentum A strong bullish third candle that closes back into the body of the first candle The Evening Star is the opposite bearish reversal pattern. It is detected when the market forms: A strong bullish first candle A small-bodied middle candle A strong bearish third candle that closes back into the body of the first candle To make the patterns easier to read on the chart, the script automatically draws a box around the full 3-candle formation: Green box = Morning Star Red box = Evening Star The box covers the full high-to-low range of the entire pattern, helping traders visually study where the reversal structure formed. Main features: Detects Morning Star bullish reversal patterns Detects Evening Star bearish reversal patterns Draws visual boxes around valid 3-candle patterns Green highlight for Morning Star formations Red highlight for Evening Star formations Optional labels for detected patterns Optional background highlighting Adjustable candle body percentage filters Adjustable middle candle size filter Adjustable third candle close requirement Optional gap requirement for more traditional pattern detection Built-in alert conditions for both pattern types The pattern logic is fully customizable. Users can adjust the required body size of the first candle, the maximum body size of the star candle, the minimum body size of the confirmation candle, and how deeply the third candle must close into the first candle’s body. The optional gap setting is included for traders who prefer a more classical definition of Morning Star and Evening Star patterns. Since many markets such as forex, gold, crypto, and index CFDs often do not produce clean session gaps, the gap requirement can be turned off for more flexible detection. This indicator is intended for educational and analytical use. It does not predict future price movement and should not be used as a standalone trading system. Morning Star and Evening Star patterns are best interpreted together with market structure, support and resistance, trend context, volume, and proper risk management.
Chỉ báo Pine Script®
của SimplySafeFx
Measured Move Projection Zones [AGPro Series]Measured Move Projection Zones 🔹 OVERVIEW Measured Move Projection Zones is a premium price-action visualization tool built around one clear sequence: impulse, base, projection, and invalidation. The script detects a qualified impulse leg, waits for a compact base range, then projects a measured-move target band from the base boundary. It also displays invalidation context, event labels, and a compact AGPro panel so the structure can be reviewed quickly on the chart. The default profile is tuned for 1-hour charts, where measured-move structures need enough responsiveness to appear consistently while still avoiding low-quality micro-swings. The result is a clean projection map for traders who want structured continuation context without turning the chart into a dense extension grid. This script is not designed to promise outcomes or mark every possible target. It is designed to make the measured-move workflow easier to see, compare, and audit. 🔹 WHAT MAKES IT DIFFERENT Most projection tools start from a manual anchor, a generic extension grid, or a simple breakout distance. Measured Move Projection Zones is more selective. It requires a directional impulse first. It then waits for a compact base. Only after the base qualifies does it create the projected target band and invalidation framework. That sequence matters because it prevents the chart from becoming a collection of random forward boxes. The visual logic is always tied to a specific price-action chain: Impulse leg -> base range -> projection band -> invalidation context. The script also avoids the look of a traditional support/resistance map. The rectangles are not generic zones. They represent measured-move components: impulse body, base range, projected target band, and invalidation reference. For public TradingView presentation, the script is deliberately visual but controlled: moderated labels, visible structure boxes, no expired-label flood, and a compact panel that summarizes the current state. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script stays in a narrow measured-move projection lane. It does not overlap with ATR compression or volatility-map scripts because the core logic is not volatility contraction, expansion, or envelope behavior. ATR is only used for normalization, tolerance, and spacing. It does not overlap with breakout-quality tools because it does not score a breakout event as the main product. Breakout beyond the base boundary only changes the measured-move state from armed to active. It does not overlap with premium/discount or valuation-zone tools because it does not map equilibrium, discount, OTE, rebalance pockets, or fair value areas. Its target band is derived from an impulse leg and base boundary, not a valuation model. It does not overlap with wedge, reversal, or pattern-scanner tools because it does not require converging rails, neckline behavior, double tops, double bottoms, head-and-shoulders logic, or multi-pattern classification. It does not overlap with liquidity heatmap, bias dashboard, or volume-profile tools because it does not estimate liquidity fields, higher-timeframe directional bias, POC gravity, acceptance ladders, or volume shelves. The differentiator is simple and specific: this is an impulse-base measured-move projection visualizer with target-band and invalidation context. ⚙️ METHODOLOGY The methodology is built in stages: 1. Swing Confirmation The script uses pivot confirmation to identify meaningful swing points. The default pivot setting is tuned for 1-hour chart rhythm. 2. Impulse Qualification After a valid pivot sequence appears, the script measures the leg size in ATR units. The impulse must be large enough and must form within a reasonable bar window. 3. Base Validation Once the impulse is confirmed, the script waits for a compact base range. The base must stay within a defined ATR height and avoid excessive retracement from the impulse end. 4. Projection Construction When the base qualifies, the script projects a measured-move target band from the base boundary. The default multiplier is 1.00, representing a classic equal measured move. 5. Invalidation Context The opposite side of the base receives an ATR-buffered invalidation guide. This does not create a trade command; it simply marks where the measured-move structure is no longer clean. 6. State Tracking The setup moves through clear states: Waiting, Building Base, Armed, Projecting, Target Band, Invalidated, and Expired. 7. Visual Management The script keeps a moderated amount of historical structure visible. Event labels are capped, expired labels are disabled by default, and the projection guide line is optional to keep the chart clean. 📊 PANEL The AGPro panel is designed for quick structure review. Panel rows include: - State - Direction - Impulse Quality - Projection Progress - Target Distance - Target Band - Base Range - Invalidation The first panel row follows the AGPro public-release standard: one merged blue header row containing only the panel title. Panel location is adjustable. Panel theme is adjustable. Panel font size is adjustable. The default size is Normal for a clean public-chart look. 🎛️ KEY INPUTS 1H Pivot Confirmation Length Controls the swing confirmation used to anchor impulse legs. Lower values are more responsive. Higher values are more selective. 1H Minimum Impulse Size Defines the minimum impulse strength in ATR units. The default is tuned to keep 1-hour charts active without accepting very small swings. 1H Base Range Bars Controls how many bars are used to validate the post-impulse base. The default is shorter for hourly chart pacing. 1H Maximum Base Height Limits how tall the base can be in ATR terms. This prevents wide ranges from being treated as clean measured-move bases. 1H Maximum Base Retracement Controls how deeply price can retrace from the impulse end while still qualifying as a measured-move structure. Measured Move Multiplier Controls the projection distance. The default value of 1.00 represents an equal measured move. 1H Target Band Width Controls the ATR-based visual tolerance around the projected target. Invalidation Buffer Places the invalidation guide beyond the opposite side of the base range. 1H Projection Bars Controls how far the projected target band and base extension reach forward. 1H Projection Expiration Controls how long an armed or active projection can remain open before it expires. 1H Event Label Retention Controls whether the chart keeps a moderated history of event labels or only the latest event label. 1H Balanced Event Labels Caps event labels so the chart remains informative but not overloaded. Show Projection Guide Line Optional dotted guide from the base boundary to the target band. Disabled by default on 1-hour charts to reduce diagonal clutter. 🔍 HOW TO READ IT Waiting No valid impulse-base sequence is active. Building Base An impulse has been detected and the script is watching for a compact base. Armed A valid base has formed. The projection framework is ready, and the target band is mapped forward. Projecting Price has moved beyond the base boundary and the measured-move structure is active. Target Band Price has interacted with the projected target band. Invalidated Price has closed beyond the invalidation guide, meaning the measured-move framework is no longer clean. Expired The projection did not complete within the selected expiration window. Event labels provide a fast visual timeline. The boxes show where the measured structure came from, where the base formed, and where the projected band sits. 🧩 BEST USE CASES This script is best used on 1-hour charts where traders want a clean view of impulse-base-continuation behavior. Strong use cases include: - Measuring continuation structures after a directional leg - Comparing active projections against nearby price action - Reviewing whether a base is compact enough to support a projection - Mapping projected target zones without using a full extension grid - Studying failed measured moves through invalidation labels and zones - Creating cleaner screenshots for price-action review The script can also be used on other timeframes, but the default settings were intentionally tuned around 1-hour structure density and visual balance. 🧠 VISUAL DESIGN PHILOSOPHY The visual design is built around premium restraint. The chart should not look empty, but it also should not look like every candle is receiving a signal. Measured Move Projection Zones keeps the main structural elements visible: - Impulse boxes - Base range boxes - Projected target bands - Invalidation zones or guides - Moderated event labels - Compact AGPro panel Expired labels are disabled by default because they can quickly become noisy on hourly charts. Event labels are still preserved in a moderated amount so the chart has enough visual context. The optional projection guide line is disabled by default because long diagonal lines can dominate a 1-hour screenshot. Users can enable it when they want a more explicit projection path. The goal is a chart that looks structured, premium, and publication-ready while still being easy to read. 🔔 ALERTS The script includes alert conditions for the core lifecycle events: - Measured Move Armed - Projection Active - Target Band Interaction - Projection Invalidated - Projection Expired These alerts are designed around structure states, not trade commands. They help users monitor when a measured-move framework forms, activates, interacts with the projected band, invalidates, or expires. 🔹 LIMITATIONS AND TRANSPARENCY Measured Move Projection Zones is a structural visualization tool. It does not predict future price and does not claim that a projected target band will be reached. Pivot-based swing logic confirms structure after the necessary bars have formed. This creates cleaner anchors, but it also means the script is not trying to label every move in real time before confirmation. The target band is a measured projection derived from the impulse and base, not a certainty zone. Invalidation and expiration states are part of the design because failed measured moves are also useful information. Settings matter. More aggressive inputs will create more structures. More conservative inputs will create fewer, cleaner structures. ✅ IDEAL USER This script is ideal for traders who: - Use 1-hour charts for price-action review - Study impulse-base-continuation behavior - Want measured-move target zones without a cluttered extension grid - Prefer visual structure over heavy signal text - Want a clean AGPro-style panel for quick state review - Care about invalidation and failed projection context - Need a public-chart-friendly tool that looks polished, focused, and easy to understand Measured Move Projection Zones is built for users who want a disciplined projection framework on the chart: enough structure to be useful, enough restraint to stay premium.
Chỉ báo Pine Script®
của AGProLabs
1-2-3 Reversal Map [AGPro Series]1-2-3 Reversal Map 🔹 OVERVIEW 1-2-3 Reversal Map is a focused TradingView overlay built for traders who want a clean, structured way to follow one of the most recognizable reversal formations in price action: the confirmed 1-2-3 reversal. This tool maps the full life cycle of a 1-2-3 structure. It identifies the confirmed swing sequence, marks Point 1, Point 2, and Point 3, projects the neckline from Point 2, evaluates the neckline break, and highlights the retest pocket after confirmation. The goal is not to fill the chart with generic reversal signals. The goal is to make the actual 1-2-3 process easier to see, compare, and track. The script is designed around visual clarity. The latest active structure stays readable through numbered swing labels, restrained guide lines, a clearly identified neckline, and a concept-specific retest pocket. The panel then summarizes the current stage, neckline status, retest status, and reversal score in a compact AG Pro layout. 🔹 WHAT MAKES IT DIFFERENT Most reversal tools try to do too many things at once. They mix candle patterns, double tops, double bottoms, head and shoulders structures, failed breakouts, generic support and resistance zones, trend filters, and broad reversal markers into one crowded chart. 1-2-3 Reversal Map takes a more disciplined approach. It stays inside one lane: the confirmed 1-2-3 reversal sequence. The script does not mark every possible turning point. It waits for a defined swing chain: 1. Point 1 establishes the original swing extreme. 2. Point 2 forms the neckline reference. 3. Point 3 confirms that price has created a structurally relevant retracement. 4. The neckline break turns the structure from a setup into a confirmed map. 5. The retest pocket shows where the broken neckline can be evaluated again. This creates a cleaner workflow than broad reversal scanners. Instead of asking the chart to show everything, the script asks one focused question: has a valid 1-2-3 structure progressed from swing formation to neckline break and retest behavior? 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script was intentionally built to avoid overlapping with other AGPro public tools. It is not a broad reversal pattern scanner. It does not combine double top, double bottom, head and shoulders, inverse head and shoulders, wedge, or candle-pattern logic. It focuses only on the 1-2-3 reversal sequence. It is not a Turtle Soup or failed-breakout tool. It does not begin with a failed range break or liquidity sweep. Its starting point is a confirmed three-point swing structure. It is not a wedge reversal tool. It does not evaluate converging trendlines, compression geometry, or wedge breakout behavior. It is not a generic support and resistance map. The rectangle is not a general zone engine. It is a neckline retest pocket that appears only after a valid 1-2-3 neckline break. It is not a breakout dashboard. Breakout logic exists only as one stage inside the 1-2-3 reversal process. This makes the script narrow enough for a differentiated AGPro release while still being visually useful and searchable for traders who specifically look for 1-2-3 reversal structure, neckline break, and retest confirmation workflows. ⚙️ METHODOLOGY The script uses confirmed pivot structure to define each 1-2-3 sequence. For a bullish 1-2-3 structure: - Point 1 is a confirmed swing low. - Point 2 is the recovery swing high and neckline reference. - Point 3 is a higher low that holds above Point 1. - The neckline break requires price to close beyond Point 2 with a configurable ATR buffer. - The retest pocket is projected around the broken neckline after confirmation. For a bearish 1-2-3 structure: - Point 1 is a confirmed swing high. - Point 2 is the reaction swing low and neckline reference. - Point 3 is a lower high that holds below Point 1. - The neckline break requires price to close beyond Point 2 with a configurable ATR buffer. - The retest pocket is projected around the broken neckline after confirmation. The reversal score is structure-native. It evaluates: - P1-P2 leg size relative to ATR - Point 3 hold quality - P3 retracement balance - Timing symmetry between structure legs - Break distance beyond the neckline - Break candle body quality - Close location inside the break candle - Optional volume participation The score is not designed as a prediction model. It is a ranking layer for comparing the quality of structures that meet the script's own rules. 📊 PANEL The AG Pro panel is built to keep the structure status readable without forcing the user to interpret every chart object manually. Panel rows: - Stage: shows whether the structure is waiting, armed, broken, retested, expired, or invalidated. - Neckline Break: shows whether the neckline has been confirmed. - Retest: shows whether the retest pocket is inactive, being watched, or held. - Reversal Score: shows the current 0-100 score and quality grade. The panel uses the AGPro standard format: - One merged blue header row - Only the script name in the first row - Adjustable panel location - Adjustable panel theme - Adjustable panel font size 🎛️ KEY INPUTS Pivot Left Bars / Pivot Right Bars: Controls how mature the swing points must be before the 1-2-3 structure can form. Higher values create fewer and cleaner structures. Lower values make the script more responsive. Minimum P1-P2 Leg ATR: Filters out small structures by requiring a minimum distance between Point 1 and Point 2. Minimum Point 3 Hold ATR: Defines how much Point 3 must hold relative to Point 1. This helps separate valid structural retracements from weak retests of the original extreme. Minimum / Maximum P3 Retracement: Controls the acceptable retracement range for Point 3. This prevents both shallow noise and near-failed structures from being accepted too easily. Neckline Break Buffer ATR: Adds a configurable buffer beyond the neckline before the break is accepted. Retest Pocket Width ATR: Controls the height of the retest pocket around the broken neckline. Retest Pocket Projection Bars: Controls how far the pocket is projected forward. Show Context Tags: Adds compact labels such as Neckline and Retest Pocket so the visual elements are easier to identify. Show Recent Structure Traces: Keeps a small rolling set of recent structure lines and pockets while keeping numbered swing labels focused on the latest active setup. Label Font Size: Controls all chart labels, including swing numbers, context tags, and optional event labels. Panel Font Size: Controls the AG Pro panel text size separately from chart labels. 🔍 HOW TO READ IT Start with the numbered swing labels. Point 1 marks the original structural extreme. Point 2 marks the neckline reference. Point 3 marks the retracement that must hold for the 1-2-3 structure to remain valid. Next, watch the neckline. The neckline is the main confirmation level. Before it breaks, the panel shows the structure as armed or waiting. After it breaks, the structure becomes a confirmed 1-2-3 map. Then watch the retest pocket. The retest pocket appears around the broken neckline after confirmation. This is the script's key context zone. It helps the user observe whether price can return to the neckline area and hold the structure instead of treating every move after the break as equally important. Finally, use the panel score as a quality filter. A high score means the structure has stronger internal balance according to the script's rules. A lower score means the 1-2-3 sequence may still exist, but its structure quality is weaker. 🧩 BEST USE CASES This script is best suited for: - Traders who use classic 1-2-3 reversal logic - Swing traders who want confirmed pivot structure - Price-action traders who track neckline breaks - Traders who prefer breakout-retest workflows - Users who want fewer, clearer chart objects instead of broad reversal scanners - Multi-timeframe chart review where structure clarity matters - Public chart sharing where visual cleanliness is important It can be useful on crypto, forex, indices, equities, and commodities, especially on charts where swing structure and neckline behavior are visually meaningful. 🧠 VISUAL DESIGN PHILOSOPHY The design goal is clarity through restraint. The script avoids a crowded signal-board style. It uses numbered labels only for the current active swing structure. It separates the neckline from the retest pocket with distinct visual language. Recent traces are kept limited and softened so they provide context without dominating the chart. The active neckline is drawn with a stronger accent color. The retest pocket is shown as a clean rectangle around the broken neckline. Structure legs are dotted and restrained, helping the user understand the geometry without overpowering price. The chart should feel premium, readable, and publication-ready. The indicator is built to support a clean TradingView screenshot rather than create visual noise. 🔔 ALERTS The script includes alerts for the main 1-2-3 lifecycle events: - 1-2-3 structure armed - Bullish 1-2-3 neckline break - Bearish 1-2-3 neckline break - 1-2-3 retest pocket held - 1-2-3 structure invalidated These alerts are designed around structure progression, not generic reversal marking. 🔹 LIMITATIONS AND TRANSPARENCY The script uses confirmed pivots, which means swing points appear only after the required right-side confirmation bars. This is intentional. It prioritizes confirmed structure over instant but unstable markings. The script does not attempt to identify every possible reversal pattern. It does not evaluate macro trend, fundamentals, order flow, news, or external liquidity conditions. The reversal score is a structured quality model, not a certainty model. It helps compare 1-2-3 structures inside this script's framework, but it does not forecast outcomes. Retest pockets are contextual areas around the broken neckline. They are not universal support or resistance zones, and they are not designed to replace broader market analysis. ✅ IDEAL USER This script is ideal for traders who: - Understand classic 1-2-3 reversal structure - Prefer confirmed market structure over early noise - Want a clean neckline and retest workflow - Value visual clarity and chart discipline - Use TradingView for structured price-action review - Want a focused public-free AGPro tool that does one concept well 1-2-3 Reversal Map is built for users who want a focused reversal map, not a crowded reversal scanner. 🔹 RELEASE NOTES - Initial public release of 1-2-3 Reversal Map . - Added confirmed Point 1, Point 2, and Point 3 swing mapping. - Added neckline projection with close-based break confirmation. - Added breakout retest pocket around the broken neckline. - Added context tags for Neckline and Retest Pocket. - Added AG Pro panel with Stage, Neckline Break, Retest, and Reversal Score. - Added adjustable panel location, panel theme, label size, and panel font size. - Added recent structure traces with softened historical visuals. - Added alerts for armed structures, neckline breaks, retest holds, and invalidations.
Chỉ báo Pine Script®
của AGProLabs
Cup and Handle Quality [AGPro Series]Cup and Handle Quality 🧩 OVERVIEW Cup and Handle Quality is a visual pattern-quality overlay for one of the most recognized continuation structures in technical analysis: the cup and handle. The script is designed to map the full pattern lifecycle instead of only marking a breakout candle. It studies the left cup rim, the cup base, the right rim recovery, the controlled handle pullback, the breakout behavior, and the measured projection context. The goal is to make cup and handle structures easier to recognize, compare, and explain directly on the chart. The final visual output is intentionally clear. The detected cup and handle candle ranges are framed with subtle boxes, while thick curved outlines make the formation readable at a glance. The rim line, target line, DEPTH arrow, and MOVE arrow help users understand how the structure is measured, not just where the label appears. ✅ WHAT MAKES IT DIFFERENT Most public cup and handle tools focus on one of two things: either they draw a simple breakout marker, or they scan aggressively and leave the chart crowded with low-context shapes. Cup and Handle Quality takes a narrower approach. It combines three layers: - Structure recognition: left rim, cup base, right rim, and handle low - Quality scoring: cup symmetry, handle depth, and breakout quality - Visual education: cup box, handle box, thick pattern outline, rim line, target line, and measurement arrows This makes the script more than a pattern detector. It is also a visual explanation tool. The chart shows where the cup was detected, where the handle formed, how deep the cup is, and where the measured projection line comes from. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script has its own lane inside the AGPro Series. It is not a flag scanner, wedge detector, triangle breakout module, inside-bar breakout tool, Donchian breakout validator, double-top detector, head-and-shoulders detector, generic support-resistance map, or supply-demand zone script. Its lane is specifically: Cup rim recovery -> controlled handle depth -> breakout participation -> measured projection line. The script focuses on the complete cup and handle lifecycle. It does not try to replace broader breakout engines, market-structure tools, support-resistance tools, liquidity tools, or trend dashboards. The defining feature is the combination of a recognizable cup-and-handle drawing with a quality panel that grades the actual pattern components. ⚙️ METHODOLOGY The engine builds the pattern from pivot structure. A qualified setup begins with a left rim, moves into a cup low, recovers into a right rim, and then forms a handle pullback after the right rim. The quality model evaluates: 1. Cup Symmetry The script compares the two rim areas and measures how balanced the cup is over time. A cleaner return from the cup base into the right rim area produces a stronger symmetry reading. 2. Handle Depth The handle is measured as a percentage of cup depth. A useful handle should create structure without pulling so deeply that the cup profile loses strength. The input range allows the user to control how strict or flexible the handle requirement should be. 3. Breakout Quality Breakout quality is calculated from candle behavior and participation context. The script checks distance beyond the rim, candle body efficiency, close location, and relative volume against a configurable baseline. 4. Final Score The final score combines the structure score and breakout behavior into a compact quality reading. Developing setups can be shown before breakout confirmation, while confirmed breakouts require the breakout quality gate. 📊 PANEL The AGPro panel displays the main quality dimensions in a compact format: - Cup Symmetry - Handle Depth - Breakout Quality - Score The first row follows the AGPro standard with a merged blue title row. Panel location, panel theme, panel font size, and label font size are adjustable from settings. 🎛️ KEY INPUTS - Pivot Span controls structural sensitivity. - Minimum Cup Bars defines the shortest accepted cup duration. - Maximum Cup Bars defines the longest accepted cup duration. - Maximum Rim Variance % controls how closely the left and right rims must align. - Minimum Cup Depth ATR filters shallow structures. - Minimum Handle Depth % filters handles that are too shallow. - Maximum Handle Depth % filters handles that are too deep. - Breakout Volume Baseline controls the relative volume comparison. - Minimum Setup Score controls developing setup visibility. - Minimum Breakout Quality controls confirmed breakout strictness. - Minimum Pattern Score controls the final quality gate. - Show Developing Setup controls pre-breakout visualization. - Show Cup Path controls the curved cup drawing and cup candle box. - Show Handle Box controls the detected handle range. - Show Target Line controls the measured projection line. - Show Measurement Arrows controls the DEPTH and MOVE explanation arrows. - Pattern Stroke Width controls the thickness of the cup and handle outlines. - Target Projection Bars controls how far the measured target line extends. 🔍 HOW TO READ IT Start with the rim line. This is the reference level the structure must recover into and eventually move beyond. Then read the cup. The subtle cup box marks the detected candle range, while the thick curved outline helps the formation read visually as a cup instead of a simple V-shaped swing. Next read the handle. The handle box marks the controlled pullback area after the right rim. The curved handle outline makes the handle easier to recognize without turning it into a generic rectangle pattern. The DEPTH arrow shows the measured cup depth. The MOVE arrow transfers that depth upward from the rim area. The TARGET line shows the forward measured projection level. The panel summarizes the same structure numerically. Stronger Cup Symmetry, disciplined Handle Depth, and stronger Breakout Quality combine into the final Score. 🧩 BEST USE CASES Cup and Handle Quality is best used on liquid symbols and timeframes where swing structure has enough room to develop. It is especially useful for users who want a clean visual map of a classic continuation pattern without filling the chart with unrelated pattern families. The default settings are tuned for active discovery. Users who want fewer patterns can raise pivot sensitivity or score thresholds. Users who want a more reactive view can lower the score thresholds, while still using the chart visuals to review pattern quality. 🧠 VISUAL DESIGN PHILOSOPHY The design philosophy is simple: make the pattern understandable without making the chart noisy. The cup and handle are drawn with thick curved lines because this pattern is visual by nature. Newer users should be able to see the shape immediately. At the same time, the candle boxes keep the drawing grounded in the actual detected structure. The target is shown as a line rather than a large zone, keeping the projection clean. The DEPTH and MOVE arrows explain the measurement logic without turning the indicator into a crowded education panel. Labels are compact, and the panel is restrained so the chart remains the main focus. 🔔 ALERTS The script includes an alert condition for confirmed cup and handle breakouts. Alert name: Cup and Handle Quality Breakout Alert message: Cup and Handle Quality : high-quality cup and handle breakout confirmed on {{ticker}} at {{close}}. Alerts are tied to confirmed breakout logic, which means the structure, breakout quality, and pattern score must pass the configured gates. 🔹 LIMITATIONS AND TRANSPARENCY Cup and handle structures are pattern-based and depend on pivot interpretation. Different sensitivity settings can produce different structures on the same chart. Very noisy markets, illiquid symbols, extreme gaps, and unusually compressed price action can reduce pattern readability. Lower thresholds may produce more setups, but visual review remains important when using any chart-pattern tool. The thick cup and handle lines are designed as visual guides. The subtle candle boxes identify the detected structure ranges, while the curved outlines make the pattern easier to understand on the chart. ✅ IDEAL USER This script is built for traders and analysts who want a clean, visual, and structured way to study cup and handle formations. It is especially useful for: - Users who want classic chart patterns with a modern quality layer - Price-action traders who care about structure, handle depth, and breakout behavior - Chart reviewers who want a clear visual explanation of the setup - Newer users who benefit from seeing the cup, handle, depth, move, and target drawn directly on the chart - AGPro users who want a focused cup-and-handle tool that does not overlap with broader breakout or market-structure scripts
Chỉ báo Pine Script®
của AGProLabs
Darvas Box Breakout Quality [AGPro Series]Darvas Box Breakout Quality 🔹 OVERVIEW Darvas Box Breakout Quality is built for one of the most recognizable and widely searched chart-pattern structures in technical analysis: the Darvas Box. The script focuses on the full Darvas lifecycle: Box formation → compression quality → breakout direction → volume support → failed-break behavior. Instead of treating every horizontal range as support and resistance, this script waits for a Darvas-style structure to form, validates the box by age and volatility-adjusted height, then evaluates how price resolves from that box. The result is a clean chart-pattern workflow designed for traders who want to study rectangular compression and breakout quality without turning the chart into a crowded zone map. The main visual element is the active Darvas box itself. By default, resolved boxes are removed after breakout so the chart stays focused on the current live structure instead of filling with old rectangles. 🔹 WHAT MAKES IT DIFFERENT Most box or breakout tools stop at drawing a rectangle or marking the first break beyond a level. Darvas Box Breakout Quality adds structure, scoring, and failure awareness. Core differentiators: • Darvas-first structure logic The rectangle is not a generic support/resistance zone. It comes from a Darvas box formation process built around a fresh seed high, containment, age, and volatility-adjusted box height. • Compression quality The script measures whether the box has enough maturity and controlled range behavior before treating it as a meaningful active structure. • Breakout quality score Every qualified breakout is evaluated with a 0-100 model that includes compression quality, relative volume, breakout distance, candle body participation, and directional close location. • Volume confirmation Breakout labels can require volume support, helping separate stronger participation events from weaker boundary pokes. • Failed-break tracking After breakout, the script watches whether price returns back inside the former box within the selected failure window. If it does, the event is marked as a failed break. • Premium visual restraint The default chart view uses one active box, compact labels, controlled label spacing, and a compact AGPro panel. The goal is to make the chart informative without making it noisy. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script is intentionally separated from the existing AGPro breakout and chart-pattern family. It is not Inside Bar Breakout Quality, because it does not require a mother bar or inside-bar compression sequence. It is not Donchian Breakout Quality, because it is not based on rolling channel highs and lows. It is not Opening Range Breakout logic, because it is not tied to a session-defined range. It is not Triangle Breakout Quality, because it does not use converging pivot boundaries, apex pressure, or diagonal structure. It is not Breakout Volume Quality, because volume is only one part of the confirmation model, not the entire concept. It is not a supply/demand, order-block, or generic support/resistance zone script. The rectangle exists only when the Darvas box formation process supports it. That distinction matters visually and analytically. On the chart, this script tells a Darvas story: rectangular compression, active box behavior, quality of release, and failed-break review. ⚙️ METHODOLOGY 1. Darvas seed detection The script looks for a fresh high over the selected lookback period. This high becomes the initial reference for a potential Darvas box. 2. Box formation After the seed appears, price must spend enough time contained beneath the upper boundary while the lower boundary develops. The box remains in formation until it meets the selected age and height requirements. 3. Volatility normalization The box height is measured relative to ATR. This helps filter boxes that are too flat to matter or too wide to represent clean compression. 4. Active box state When the box qualifies, the script displays the active Darvas box and optional midpoint. The box projects forward so the active breakout boundary remains visible while price approaches it. 5. Breakout confirmation A bullish breakout requires price to resolve above the Darvas top. A bearish breakout requires price to resolve below the Darvas bottom. Users can require close-based confirmation for stricter filtering. 6. Quality score The breakout score combines: • Compression quality • Relative volume support • ATR-normalized breakout distance • Candle body participation • Directional close location 7. Failed-break monitoring After breakout, the script watches a defined number of bars. If price returns back inside the former Darvas boundary, the failed-break marker is printed. 📊 PANEL The AGPro panel summarizes the current Darvas environment: • Box Age • Compression • Breakout Side • Volume Support • Latest Quality / State The first panel row follows the AGPro publication standard: one merged blue header row containing only the panel title. Panel location, panel theme, and panel font size are adjustable from settings. 🎛️ KEY INPUTS Darvas Box Detection • New High Lookback • Minimum Box Age • Maximum Box Age • ATR Length • Minimum Box Height ATR • Maximum Box Height ATR • Require Close Beyond Box Breakout Quality • Volume MA Length • Volume Support Threshold • Require Volume Support • Target Break Distance ATR • Minimum Breakout Score • Failed Break Window Visual Controls • Show Active Darvas Box • Show Box Midline • Show Breakout Labels • Show Failed Break Markers • Keep Resolved Box • Box Projection Bars • Label Cooldown Bars • Maximum Visible Labels • Label Offset ATR • Label Stack Offset ATR • Label Font Size Panel • Panel Location • Panel Theme • Panel Font Size 🔍 HOW TO READ IT When a Darvas box becomes active, the chart displays the live rectangular structure. The panel shows how old the box is, how compressed it is, and whether the latest environment has breakout direction or volume support. When price resolves outside the box with enough quality, the chart prints a compact breakout label such as UP 79 or DN 75. The number represents the breakout quality score. When price fails to hold outside the box and returns back inside during the selected failure window, the script prints a compact failed-break marker such as FAIL UP or FAIL DN. The best readings come when the box is visually clear, compression is meaningful, and the breakout candle has both directional close quality and volume support. 🧩 BEST USE CASES • Classic Darvas box formations • Rectangular range compression • Box breakout quality review • Volume-backed breakout confirmation • Failed-break review after a box release • Clean chart-pattern study • Multi-timeframe Darvas structure observation • Screenshot-friendly public chart analysis 🧠 VISUAL DESIGN PHILOSOPHY Darvas Box Breakout Quality is designed to look premium through restraint. The script avoids filling the chart with old boxes by default. It keeps the active Darvas box as the main visual layer, uses short event labels, adds cooldown and stack spacing to reduce overlap, and keeps the panel compact. This makes the indicator easier to publish, easier to read, and easier to use across different symbols and timeframes. 🔔 ALERTS The script includes alert conditions for: • High-quality bullish Darvas breakout • High-quality bearish Darvas breakout • Failed bullish Darvas breakout • Failed bearish Darvas breakout These alerts follow the same structure-aware logic used by the chart labels. 🔹 LIMITATIONS AND TRANSPARENCY Darvas box detection is structure-based and depends on the selected lookback, age, and ATR filters. Changing those settings can make the script more selective or more active. Volume support depends on the quality of the symbol's volume feed. On instruments where volume is less informative, users may prefer to adjust the volume threshold or disable the volume requirement. The score is a structured description of breakout quality according to the script's internal model. It is designed to help compare Darvas box releases by quality, not to replace the user's broader market context. ✅ IDEAL USER This script is designed for traders who want a focused Darvas box tool with cleaner structure detection, breakout quality scoring, volume confirmation, failed-break awareness, and a premium chart layout. It is best suited for users who want the Darvas box itself to remain the main story on the chart.
Chỉ báo Pine Script®
của AGProLabs
Flag Continuation Zones [AGPro Series]🔷 Flag Continuation Zones Flag Continuation Zones is a premium bull flag and bear flag continuation engine designed to identify clean continuation structures without turning the chart into a generic breakout scanner. The script focuses on a classic, highly recognizable price-action sequence: impulse pole → controlled flag compression → qualified breakout → forward continuation zone Instead of marking every small consolidation as a flag, the engine validates the structure through pole strength, travel efficiency, flag depth, channel compression, trend alignment, breakout distance, and optional volume participation. 🔷 What Makes This Different Most flag indicators are visually simple but structurally loose. They often label shallow pauses, random pullbacks, or broad ranges as flags. Flag Continuation Zones takes a stricter route. It first requires a validated impulse pole. The move must be large enough relative to ATR and efficient enough to show directional commitment. After that, the script waits for a controlled counter-trend flag window. The flag must remain compact, avoid excessive retracement, and preserve continuation structure before any breakout is accepted. This creates a chart experience that is more selective, cleaner, and easier to trust visually. 🔷 How The Engine Works The script evaluates four core stages: 1. Pole Validation The prior impulse is measured by ATR multiple and path efficiency. This helps separate real directional movement from noisy grinding price action. 2. Flag Compression After the pole, the script studies the consolidation window. A valid flag must remain inside an acceptable depth and range relative to the pole. 3. Breakout Confirmation A continuation event is accepted only when price clears the flag boundary with an ATR buffer and, when available, enough volume participation. 4. Continuation Mapping Accepted structures create a forward rectangular zone, an impulse pole line, a breakout label, and an optional measured-move projection line. 🔷 Visual Design The visual language is intentionally restrained: - clean bull and bear flag labels - rectangular continuation zones - impulse pole reference lines - optional measured-move target line - trend EMA context - compact AG Pro status panel - adjustable panel location - dark and light panel themes - adjustable label and panel font sizes The goal is to make the pattern visible and premium without crowding the chart. 🔷 How This Is Different From Other AGPro Tools This script is not a generic Trend Continuation Quality tool. It is not an abstract continuation scorecard. It is specifically built around the flag pattern family: - impulse pole quality - flag channel compression - breakout through the flag boundary - measured-move continuation context It also avoids overlapping with triangle, consolidation breakout, Donchian breakout, inside-bar breakout, and trendline tools by staying focused on the pole-and-flag structure itself. 🔷 Best Fit This script is useful for traders who want to scan for cleaner bull flag and bear flag continuation patterns across crypto, forex, stocks, indices, and futures. It is especially suitable for: - continuation traders - breakout traders who want stricter structure - price-action traders who follow classic chart patterns - users who prefer rectangular zones and measured-move context - traders who want fewer but higher-quality labels 🔷 Key Inputs Important controls include: - Pole Lookback - Flag Window - Minimum Flag Bars - Minimum Pole ATR Multiple - Minimum Pole Efficiency - Maximum Flag Depth - Maximum Flag Range - Breakout Buffer - Volume Confirmation - Signal Cooldown - Zone Forward Bars - Label Font Size - Panel Location - Panel Theme - Panel Font Size 🔷 In One Sentence Flag Continuation Zones turns the classic bull flag and bear flag pattern into a cleaner, scored, zone-based continuation map built for premium public chart presentation.
Chỉ báo Pine Script®
của AGProLabs
2
Wedge Reversal Detector [AGPro Series]Wedge Reversal Detector 🔷 Overview Wedge Reversal Detector is a focused chart-pattern engine built for one specific structure: the rising wedge and falling wedge. Instead of scanning every possible reversal pattern, drawing broad support and resistance, or behaving like a generic breakout dashboard, this script studies the geometry of a wedge itself: confirmed pivot boundaries, slope convergence, pattern maturity, reversal break quality, projected reaction zone, and invalidation context. The goal is to make wedge analysis cleaner and more objective on a live chart. A valid wedge is not treated as just two random trendlines. The script requires a confirmed pivot structure, a meaningful initial width, a narrowing final width, and the correct slope relationship for either a rising wedge or a falling wedge. Once a qualified structure is active, it draws the converging boundaries directly on the chart and waits for a reversal-side break. The detector also includes two visual preparation layers. The developing-wedge preview layer can draw dashed boundaries before the structure is fully armed. The Wedge Radar layer keeps the latest compression window visible when no confirmed candidate is active. Radar projection is capped so higher-timeframe charts stay clean, and low-compression radar states can remain boundary-only until the structure becomes visually meaningful. Break labels, reaction zones, and invalidation guides remain reserved for stricter confirmed candidates. This keeps the chart visually informative without weakening the actual confirmation logic. The visual layer includes compact boundary tags that label the upper and lower rails directly on the right side of the structure. These tags are designed as chart annotations, not signal spam: they identify whether the rail is acting as a rejection rail, compression rail, reclaim rail, break rail, or invalidation rail. A single optional compression tag can also summarize the current radar or wedge state. 🔶 Why This Is Different Many wedge indicators stop at pattern drawing. Others become broad pattern scanners that mix wedges with channels, double tops, double bottoms, triangles, support and resistance zones, and unrelated reversal signals. Wedge Reversal Detector intentionally stays narrower. Its edge is the sequence: 1. Detect a qualified rising or falling wedge from confirmed pivots. 2. Measure whether the boundaries are genuinely converging. 3. Grade wedge maturity before any break occurs. 4. Confirm the reversal-side break with an optional close-based rule and ATR buffer. 5. Score break quality using maturity, boundary expansion, candle structure, close location, and volume participation. 6. Project a concept-native reaction zone from the wedge width. 7. Display a clean invalidation guide so the structure remains readable after the break. This makes the script a wedge lifecycle tool, not a general reversal scanner. 💎 Unique Edge The most important difference is that the script treats a wedge as a living geometric compression structure. It does not simply connect the latest two highs and lows and call the pattern complete. A candidate must pass span, width, convergence, and slope requirements before it becomes active. For rising wedges, the script looks for rising pivot highs and rising pivot lows where the lower boundary is climbing faster than the upper boundary. This creates upward compression, which is the core geometry behind a rising wedge. For falling wedges, it looks for falling pivot highs and falling pivot lows where the upper boundary is falling faster than the lower boundary. This creates downward compression, which is the core geometry behind a falling wedge. That difference matters because many weak wedge tools confuse ordinary channels with wedge compression. This script separates those structures by requiring the final width to be materially smaller than the starting width. 🔹 Methodology The engine begins with confirmed pivot highs and pivot lows. The user controls the pivot confirmation length, which allows the detector to be tuned for intraday, swing, or higher-timeframe charts. From the latest confirmed swing pair, the script builds two boundary lines: - Upper boundary from confirmed pivot highs - Lower boundary from confirmed pivot lows The detector then evaluates: - Pattern span in bars - Initial boundary width measured against ATR - Final boundary width relative to the starting width - Upper boundary slope - Lower boundary slope - Correct rising-wedge or falling-wedge geometry Only when those requirements align does the pattern become an active wedge. 🔸 Break Quality Model A wedge break is scored only after the reversal-side boundary is broken. The break quality score is built from multiple factors: - Wedge maturity - Distance beyond the broken boundary - Candle body participation - Close location inside the break candle - Volume ratio versus recent average volume The score is translated into a simple grade so the chart stays easy to read. This does not claim that a break must continue. It gives the user a structured read of how strong the confirmed break appears under the script's own rules. 🎯 Projected Reaction Zone After a confirmed wedge reversal break, the script projects a reaction zone using the initial wedge width. This zone is not a generic support/resistance box. It is tied directly to the wedge geometry and appears only after the structure confirms. The goal is to show the next area where price may naturally react after escaping the compression. The zone width and projection length are configurable, so users can keep the chart compact or allow more forward context depending on timeframe and style. 🧭 Invalidation Context The script also draws an invalidation guide after a confirmed break. For a bullish falling-wedge break, invalidation is tracked below the opposite wedge boundary with an ATR buffer. For a bearish rising-wedge break, invalidation is tracked above the opposite wedge boundary with an ATR buffer. This keeps the post-break structure organized without adding trade instructions or turning the script into a strategy. 📊 Panel The compact AGPro panel summarizes the current wedge lifecycle: - Wedge Type - Maturity - Break Quality - Target Zone Panel location, panel theme, and panel font size are adjustable from settings. The first panel row uses the AGPro standard: one merged blue header row containing only the panel title. ⚙️ Key Settings - Pivot Confirmation Length controls how strict the swing structure is. - Minimum Wedge Span filters out tiny patterns. - Maximum Final Width Ratio controls how much convergence is required. - Developing Wedge Preview Ratio controls how early dashed formation boundaries can appear. - Wedge Radar controls the latest-window visual radar that prevents panel-only charts while waiting for confirmed wedge geometry. - Radar Projection Bars limits how far radar boundaries extend into future bars. - Radar Fill Threshold keeps low-compression radar structures from creating oversized filled areas. - Boundary Tags add compact right-side rail annotations so the structure is easier to read without covering candles. - Compression Tag shows one status label for radar compression or armed-wedge maturity. - Boundary Break Buffer ATR adds confirmation distance beyond the wedge boundary. - Volume Confirmation Ratio contributes to break quality scoring. - Projection Length Bars controls how long the reaction zone extends forward. - Label Font Size and Label Offset ATR help maintain a clean chart presentation. 🧩 How It Differs From Other AGPro Tools This script is intentionally separate from AGPro channel, breakout, liquidity, and broad reversal tools. It is not a channel map. Channel tools organize parallel or multi-family structure. Wedge Reversal Detector only studies converging wedge geometry. It is not a double top or double bottom detector. Those patterns are based on repeated horizontal rejection and neckline behavior. This script is based on converging diagonal boundaries. It is not a broad reversal scanner. It does not combine every reversal pattern into one dashboard. It stays focused on wedge compression, wedge maturity, reversal break, projected reaction zone, and invalidation. It is not a generic breakout quality tool. Break quality is evaluated only after a valid rising or falling wedge exists. 🔔 Alerts The script includes alerts for: - Bullish falling wedge break - Bearish rising wedge break - High quality wedge break - Wedge invalidation These alerts are event notifications for the detected structure, not automated trading instructions. ✨ Best Use Case Wedge Reversal Detector is best suited for traders who already watch chart patterns, market structure, compression, and failed trend continuation. It helps reduce manual drawing by highlighting qualified wedge structures, then keeping the chart organized through the confirmation, projection, and invalidation phases. The result is a clean, premium, wedge-specific workflow designed for public chart reading: fewer random lines, fewer noisy labels, and a clearer view of whether the wedge structure is still forming, breaking, projecting, or invalidating.
Chỉ báo Pine Script®
của AGProLabs
Triangle Breakout Quality [AGPro Series]Triangle Breakout Quality 🔺 OVERVIEW Triangle Breakout Quality is built for one of the most searched and visually recognizable chart structures in technical analysis: the triangle breakout. The script automatically detects triangle candidates from confirmed pivot highs and pivot lows, projects the upper and lower converging boundaries, measures how much the structure has compressed, locates the projected apex, and grades the quality of the eventual breakout. After the release, it monitors the first return toward the broken triangle boundary so the user can see whether price accepted the breakout or quickly lost structural quality. The goal is not to mark every small consolidation or every trendline touch. The goal is to isolate the full triangle sequence: Formation -> compression -> apex pressure -> boundary release -> first retest state. That full lifecycle is what gives the tool its own identity. A triangle is not just a range, not just a single diagonal line, and not just a breakout candle. It is a narrowing structure where both sides of price are being compressed into a decision point. This script is designed around that idea from the ground up. 🔹 WHAT MAKES IT DIFFERENT Most triangle tools stop at drawing two lines. Most breakout tools stop at the first candle outside a boundary. Triangle Breakout Quality does more by turning the structure into a scored, state-aware workflow. Core differentiators: • Dual-boundary validation The script requires both an upper pivot boundary and a lower pivot boundary. The two lines must converge. This prevents the logic from acting like a generic trendline-break detector. • Compression measurement The engine compares the opening width of the triangle with the current width. A pattern must show meaningful narrowing before it can qualify. • Apex pressure logic The script projects where the upper and lower boundaries intersect and evaluates whether the current structure is close enough to that decision zone to matter. • Breakout quality score Every displayed breakout receives a 0-100 score based on compression, apex pressure, breakout distance, candle body participation, close quality, and optional volume expansion. • Retest state After a breakout, the script watches the first return toward the broken triangle boundary. A held retest and a failed retest are visually different states, not the same event. • Premium visual restraint The chart shows active triangle lines, controlled breakout labels, optional retest labels, subtle candle tint, and a compact AGPro panel. Label density is capped so the layout stays clean for live use and publication screenshots. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script is intentionally separated from the existing AGPro breakout and structure family. It is not Break-Retest Quality, because it does not begin with a horizontal pivot break and then grade the first retest of that static level. Triangle Breakout Quality first requires a valid converging triangle structure. It is not Failed Break Quality, because it is not centered on false breaks and reclaim behavior. It tracks the primary breakout from a valid triangle and then monitors the first boundary retest. It is not Consolidation Breakout Quality, because the reference structure is not a horizontal range. A triangle must have two projected pivot boundaries that move toward each other. It is not Donchian Breakout Quality, because it is not based on period highs and lows or channel escape logic. It is not ATR Envelope Breakout Quality, because it does not use a volatility envelope as the breakout shell. It is not Auto Trendline Break Quality, because it does not score isolated trendline breaks. The event only matters when the upper and lower lines together form a valid triangle compression structure. That distinction matters visually and analytically. On the chart, this script tells a triangle story: converging boundaries, apex pressure, breakout quality, and retest state. It belongs in the chart-pattern lane, not the generic breakout lane. ⚙️ METHODOLOGY 1. Pivot anchors The script uses confirmed pivot highs and pivot lows to define the latest upper and lower triangle boundaries. This keeps the structure rules transparent and reproducible. 2. Convergence filter The upper boundary and lower boundary must move toward each other. The current width of the pattern must be smaller than the starting width, and the compression percentage must meet the selected threshold. 3. Width and maturity filters The pattern must be old enough to represent a real structure, but not so old that it becomes stale. The starting width and current width are also normalized by ATR so the same logic can adapt across symbols and timeframes. 4. Apex projection The script calculates where the two projected boundaries intersect. This creates the apex pressure layer, which helps separate mature triangle compression from loose diagonal movement. 5. Breakout confirmation A bullish breakout requires price to close beyond the projected upper boundary by an ATR-normalized buffer. A bearish breakout requires price to close beyond the projected lower boundary by the same type of buffer. 6. Quality score The breakout score combines: • Compression quality • Apex pressure • Breakout distance beyond the boundary • Candle body participation • Close position inside the breakout candle • Optional volume participation The result is displayed as a compact grade and score so the chart remains readable. 7. Retest state After a breakout, the script projects the broken triangle boundary forward internally and evaluates an ATR-scaled retest tolerance around it. If price revisits that boundary area and holds the correct side, the retest is marked as held. If price loses the boundary, the retest state is marked as failed. 📊 PANEL The AGPro panel summarizes the current structure and latest event: • Pattern Age • Compression • Apex Pressure • Breakout Side • Retest Quality • Current State Panel location, theme, and font size are adjustable. The first row follows the AGPro publication standard: one merged blue header row containing only the panel title. 🎛️ KEY INPUTS Triangle Structure • Pivot Length • Minimum Pattern Age • Maximum Pattern Age • Minimum Compression % • Minimum Starting Width ATR • Maximum Current Width ATR • Maximum Forward Apex Bars Breakout Quality • ATR Length • Volume Average Length • Use Volume Participation • Volume Full-Score Ratio • Minimum Break Distance ATR • High Quality Threshold • Minimum Label Score • Visual Cooldown Bars Retest State • Retest Minimum Bars • Retest Window Bars • Retest Tolerance ATR Visual Controls • Show Triangle Lines • Show Breakout Labels • Show Retest Labels • Tint Breakout Candles • Label Offset ATR • Label Font Size • Maximum Visible Events Panel • Show Panel • Panel Position • Panel Theme • Panel Font Size 🔍 HOW TO READ IT When a valid triangle is forming, the chart displays the converging upper and lower boundaries. The panel reports apex pressure and compression so the projected decision area is visible without adding extra rectangles to the chart. Compression shows how much the pattern has tightened relative to its opening width. When price closes beyond a valid boundary, the script prints a compact breakout label with a quality grade and score. A higher score means the breakout candle carried stronger structural qualities according to the script's rules. After the breakout, retest labels and the panel show whether the first return toward the broken triangle boundary held or failed. A held retest suggests cleaner acceptance of the breakout boundary. A failed retest suggests the release lost quality. Use the tool as a structured chart-reading layer. It is designed to help users compare triangle breakouts by quality, not to replace broader context such as trend, liquidity, session behavior, or personal execution rules. 🧩 BEST USE CASES • Symmetrical triangle compression • Ascending triangle pressure • Descending triangle pressure • Breakout candle quality review • First retest monitoring after triangle release • Screenshot-friendly pattern study • Multi-symbol scanning for cleaner chart-pattern candidates 🔹 LIMITATIONS AND TRANSPARENCY Triangle detection is based on confirmed pivots, so the final anchor points appear only after the selected pivot length has elapsed. This is standard pivot behavior and keeps the structure rules visible. The live triangle can change while new pivots form. Breakout and retest labels are event-based and are designed to remain stable after confirmation. Volume participation is optional because volume quality varies across markets and feeds. On instruments where volume is less informative, the volume component can be disabled. The score is a structured description of the triangle release according to the script's internal model. It should be read as context, not as an execution command.
Chỉ báo Pine Script®
của AGProLabs
Head & Shoulders Auto Detector [AGPro Series]Head & Shoulders Auto Detector 🎯 **Overview** Head & Shoulders Auto Detector is a precision pattern recognition tool that automatically identifies classic Head & Shoulders (bearish) and Inverse Head & Shoulders (bullish) reversal formations across any market and timeframe. Built from the ground up for traders who want the full lifecycle of a pattern tracked on-chart — not just a label and a line, but forming → confirmation → target/stop outcome — with a transparent, quality-scored framework that filters low-probability setups before they clutter the chart. Every pattern carries a composite quality score, a symmetry percentage, an ATR-adaptive neckline, two projection targets, and a live status label that evolves through the pattern's lifespan. 🔹 **Unique Edge** Most H&S indicators stop at detection. This one goes further: • **Full lifecycle state machine** — every pattern moves through four explicit states (Forming → Confirmed → Target Hit / Stopped / Invalidated / Expired), and the visuals update in real time at each transition. • **Dead pattern hygiene** — once a pattern fails or hits target, orphan TP and stop lines are removed, the neckline freezes at the decision bar, and the status label grays out. The chart never accumulates stale clutter. • **Quality-driven visual hierarchy** — high-quality patterns (Q≥75) are rendered with a star marker and full saturation, mid-tier patterns get standard treatment, and low-tier patterns (Q<60) fade into the background so the trader's eye is guided to what matters. • **Dual-target projection with R:R** — every confirmation displays both a classic measured-move TP1 and an extended 1.618× TP2, each labeled with the exact reward-to-risk ratio calculated at entry. • **ATR-adaptive everything** — shoulder tolerance, neckline flatness, head prominence, stop buffer, and label offsets all scale with volatility, so the same settings work across BTC 4H, gold daily, or small-cap stocks. 🔹 **Methodology** Patterns are detected from confirmed pivot highs and lows using a configurable pivot length. For a valid Head & Shoulders, three same-side pivots (Left Shoulder → Head → Right Shoulder) must satisfy: • Head extends beyond both shoulders by at least the configured ATR multiple (prominence test). • Shoulder heights differ by less than the shoulder tolerance in ATR units (symmetry test). • Two opposite-side pivots between LS-Head and Head-RS define the neckline; their vertical distance must be within the neckline tolerance. • Composite symmetry score (50% time symmetry, 50% price symmetry) must exceed the minimum threshold. Quality score combines four weighted components: • Symmetry (45%) — time + price balance between shoulders • Neckline flatness (25%) — how horizontal the neckline is • Volume profile (15%) — head-bar volume relative to shoulder average • Head prominence (15%) — how clearly the head dominates Confirmation triggers when price closes beyond the neckline level (interpolated for sloped necklines). Stop is placed at the head level plus an ATR buffer to avoid wick stop-outs. TP1 uses the standard head-to-neckline measured move; TP2 extends to 1.618× that projection. 🔹 **Signals & Alerts** Four alert events available: • **Pattern Forming** — a valid H&S or Inverse H&S structure has been detected but not yet confirmed. • **Pattern Confirmed** — close has broken the neckline; entry is live with TP/Stop drawn. • **Target Hit** — TP1 has been reached on a confirmed pattern. • **Neckline Retest** — after confirmation, price has returned to touch the neckline (common high-probability re-entry zone). 🔹 **Key Inputs** • **Pivot Length** — controls swing-point sensitivity • **Min Symmetry Score** — minimum shoulder symmetry percentage to accept a pattern (default 60, balanced) • **Neckline Tolerance (ATR)** — how sloped a neckline is allowed to be • **Shoulder Height Tolerance (ATR)** — how different the two shoulders can be • **Head Prominence (ATR)** — minimum head extension beyond shoulders • **Volume Soft Confirmation** — toggle volume influence on quality score • **TP1 Method** — Classic (horizontal neckline reference) or Measured Move (slope-aware) • **Stop Buffer (ATR)** — extra room beyond the head level (default 0.35) • **Max Pattern Lifetime** — bars after which an unconfirmed pattern expires • Full visual controls: font size, panel position, theme, zone display, label offset, color palette 🔹 **How to Use** 1. Apply the indicator to any liquid market and timeframe. 4H and higher tend to produce the most reliable formations; intraday works but expects more noise. 2. Watch for patterns labeled with a ⭐ and bright color (Q≥75) — these are the highest-confidence setups. 3. Wait for the ✓ Confirmed status to appear before entering; the ⚡ breakout marker pinpoints the exact confirmation bar. 4. Use the TP1 / TP2 R:R labels to size the trade. Stop is pre-calculated at head level + ATR buffer. 5. Monitor the panel stats over time to understand the indicator's behavior on your specific market — Win Rate, Avg Quality, and Last Signal all update live. 6. Consider combining with trend context (a bearish H&S is far more powerful at resistance in a downtrend than in the middle of a strong uptrend). 🔹 **Limitations & Transparency** • Pattern detection uses confirmed pivots, so signals appear with a natural delay equal to the Pivot Length setting. This is intrinsic to pivot-based logic, not a flaw. • Quality score and historical win rate are chart-native calculations based on the loaded history; they are descriptive, not predictive. • The script does not include multi-timeframe confluence or trend filters — these are deliberate design choices to keep the tool focused and composable with other indicators. • Volume confirmation is a soft scoring input, not a hard filter, since many crypto pairs and indices have volume data of variable reliability. • Pattern state transitions use close-based confirmation; intrabar wicks do not trigger state changes except for stop/target hits, which are high/low based as expected. 🔹 **Risk Disclosure** This indicator is an analytical tool, not a trading recommendation or financial advice. Pattern recognition describes what has formed on a chart; it does not predict future price movement with certainty. Always use proper risk management, position sizing, and confirm signals with your own analysis. Past pattern statistics shown on the panel are descriptive of the visible history and do not guarantee future performance. Trading involves substantial risk of loss.
Chỉ báo Pine Script®
của AGProLabs
Double Top / Bottom Quality [AGPro Series]Double Top / Bottom Quality Double Top / Bottom Quality is a disciplined, rules-based detector for the two most iconic reversal chart patterns: the Double Top (M-shape) and the Double Bottom (W-shape). Unlike basic pattern finders that fire on any two similar swings, this indicator scores every candidate pattern on a transparent 0–100 Quality Score across four independent factors — and only confirms patterns that pass a user-defined minimum. The result is a cleaner chart with fewer, higher-conviction setups. Every confirmed pattern delivers a full trading lifecycle: a neckline flip S/R zone (resistance → support on a Double Bottom; support → resistance on a Double Top) and a measured-move target projection band. Pending, confirmed, target-hit and invalidated states are all tracked with disciplined cleanup, so the chart never becomes cluttered. 🔹 WHAT THE INDICATOR DOES It detects classic Double Top and Double Bottom reversal structures using pivot-based swing analysis with ATR-normalised equality, depth and time-window filters. Each valid candidate is then scored on four independent quality factors. Only candidates that exceed the user-defined minimum score and break the neckline on close are confirmed. Once confirmed, the pattern draws its neckline flip zone and target projection band, labels the setup with its letter grade and score, and tracks the outcome until target hit or invalidation. 🔹 UNIQUE EDGE — WHY IT IS DIFFERENT Most Double Top / Double Bottom scripts simply connect two similar swings and draw a line. This indicator adds a transparent 4-component Quality Score so every setup is rated before confirmation, not just flagged. Three factors that most scripts ignore are treated as first-class inputs here: • Pattern Symmetry — the left leg and the right leg of the M / W must be comparable in time, or the pattern is penalised • Break Volume Confirmation — the neckline break bar is compared to its rolling volume average, and thin breaks score lower • Depth Quality — shallow, flat patterns are filtered out in favour of deep, decisive reversals The full lifecycle visualisation (pending → confirmed → target hit) and same-region deduplication are also uncommon in this pattern category, and together they produce a chart that reads cleanly even on long history. 🔹 METHODOLOGY • Pivot detection via ta.pivothigh / ta.pivotlow with user-configurable length • Equality check: the two peaks (or troughs) must be within a configurable ATR tolerance • Time-window filter: minimum and maximum bars allowed between the two pivots • Depth filter: the vertical distance from peaks to neckline must exceed a minimum ATR threshold • Neckline: lowest low between the two peaks for a Double Top, or highest high between the two troughs for a Double Bottom • Confirmation trigger: daily close beyond the neckline • Invalidation: price exceeds the pattern extreme before the neckline break • Cooldown: after confirmation, new patterns in the same price region are suppressed for N bars to prevent clustering 🔹 QUALITY SCORE (0–100) Each confirmed pattern receives a transparent score based on four equally-weighted factors (25 points each): 1. Peak / Trough Equality — how close the two extremes are to each other, measured in ATR units 2. Break Volume Confirmation — break-bar volume relative to the 20-bar average 3. Pattern Symmetry — ratio of the shorter leg to the longer leg (time-based) 4. Depth Quality — pattern height relative to ATR (deeper = higher score) Score → Grade mapping: • 85–100 = A • 70–84 = B • 55–69 = C • <55 = D 🔹 SIGNALS, ZONES & ALERTS Once a pattern confirms, the indicator renders: • A solid neckline that extends to the right edge • A neckline flip zone (rectangular S/R band at the neckline level) • A target projection zone at the measured-move price (pattern height projected from neckline) • A grade label (A / B / C) and numeric score on the pattern Two alert types are available: "Confirmed Pattern" fires on confirmation, and "Target Hit" fires when the measured-move target is reached. 🔹 KEY INPUTS • Pivot Length, ATR Length • Peak / Trough Equality tolerance (ATR) • Min / Max bars between peaks • Minimum Pattern Depth (ATR) • Break Volume Multiplier • Cooldown bars • Minimum Quality Score filter • Show Pending Patterns toggle • Show Neckline Flip Zone / Target Zone toggles • Zone Width (ATR) • Stale Cleanup Distance, Max Active Zones • Label size, Panel position / theme / size • Alert toggles 🔹 HOW TO USE • Choose a liquid market and a timeframe that matches your trading style (4H and 1D are particularly well-suited to classic reversal patterns) • Watch for Pending patterns (dashed lines) — these mark candidates awaiting a neckline break • A Confirmed pattern with grade B or higher is the typical entry signal; aggressive traders may use C-grade while conservative traders may filter to A-grade only • Use the neckline flip zone as a logical stop-loss reference (above it for Double Tops, below for Double Bottoms) • Use the target projection zone as a take-profit reference based on the classical measured-move rule • Combine with higher-timeframe trend, volume profile or an independent confluence tool for best results 🔹 LIMITATIONS & TRANSPARENCY • Pivot-based detection means patterns confirm with a natural lag equal to the pivot length • No strategy is 100% reliable — Quality Score filters improve average conviction but do not guarantee outcomes • Very low-liquidity markets may produce unstable pivots; a longer pivot length helps • Measured-move targets are a classical reference, not a prediction • Historical statistics shown in the panel are pattern-completion counts on the loaded chart; they are not a guaranteed forward performance estimate 🔹 RISK DISCLOSURE This script is provided for educational and analytical purposes only. It is not financial advice and does not constitute a recommendation to buy, sell or hold any asset. Trading involves substantial risk of loss; past pattern performance is not indicative of future results. Always perform your own research and use appropriate risk management. Open-source under the Mozilla Public License 2.0 — contributions and feedback are welcome.
Chỉ báo Pine Script®
của AGProLabs
AG Pro Reversal Pattern Quality Scanner [AGPro Series]AG Pro Reversal Pattern Quality Scanner Overview / What it does AG Pro Reversal Pattern Quality Scanner is an overlay tool designed to detect and visualize selected classical reversal structures directly on the chart while adding a structured quality layer to each valid setup. The script focuses on four widely recognized reversal formations: Double Top, Double Bottom, Head & Shoulders, and Inverse Head & Shoulders. Instead of marking every possible structural resemblance, the script applies a filtered detection workflow based on pivot structure, pattern width, peak or trough equality, pullback depth, neckline logic, and an internal quality model. The goal is not simply to identify a shape, but to highlight formations that display more balanced structure and more usable context. Each detected pattern can be displayed with a pattern box, a projected neckline, and a quality label that summarizes the pattern type, directional bias, quality score, and grade. This makes the script suitable for traders who want a structured visual map of potential reversal zones rather than a raw pattern-highlighting tool with no ranking logic. The indicator is built for chart reading and workflow support. It does not attempt to forecast future price movement with certainty, and it should not be interpreted as a standalone trade system. Its role is to help users organize reversal structures, compare them visually, and focus on higher-quality formations when reviewing price action. Unique Edge The main distinction of this script is that it does not treat all reversal patterns as equivalent. A detected pattern is further evaluated through a composite quality framework that considers structural symmetry, pullback depth, and volume behavior during formation and break conditions. For Double Top and Double Bottom structures, the script checks whether the two peaks or troughs remain sufficiently close to each other within a defined tolerance and whether the intermediate pullback is large enough to make the structure meaningful. For Head & Shoulders and Inverse Head & Shoulders structures, the script evaluates shoulder symmetry, time symmetry, and relative positioning of the head against the shoulders. The volume component is not used as a promise of confirmation. It is used as an additional contextual factor inside the quality score. In general terms, contracting volume during formation and stronger participation during the break candidate can improve the overall score when those conditions are present. Another important part of the design is visual prioritization. The script does not only draw the structure. It also attempts to keep the chart readable by organizing labels, neckline extensions, and pattern boxes in a way that preserves interpretation. The result is a cleaner reversal-pattern map that aims to be more practical than a simple shape detector. Methodology The script begins with swing pivot detection. These pivots act as the structural foundation for all pattern candidates. Once enough pivot highs and lows are available, the script evaluates whether recent pivot sequences fit the requirements of one of the supported reversal structures. For Double Top detection, the script checks whether two recent highs are similar enough, whether the interim low forms a valid neckline reference, whether the pattern width stays within defined limits, and whether price has broken below the neckline. For Double Bottom detection, the logic is mirrored on the bullish side through two similar lows, an interim high as the neckline reference, and a bullish break condition above that neckline. For Head & Shoulders detection, the script evaluates a sequence of three pivot highs where the middle high must exceed the two shoulders. It then estimates neckline structure from the lows between those highs and applies symmetry and pullback checks before accepting the setup. Inverse Head & Shoulders applies the same structural concept in reverse using pivot lows. After a valid break condition is detected, the script calculates a composite quality score. This score is based on user-controlled weights for volume behavior, symmetry, and pullback depth. The final output is normalized into a 1 to 10 quality scale, then translated into a grade label for easier scanning. Signals & Alerts The script can generate pattern-based alert conditions for: - Double Top - Double Bottom - Head & Shoulders - Inverse Head & Shoulders These alerts are tied to the script’s internal structural conditions and neckline break logic. As with any chart-based alert workflow, users should confirm that the selected settings match their market, timeframe, and execution style. Visual output can include: - Pattern boxes - Neckline lines - Neckline labels - Pattern quality labels - Break candle highlighting - Information panel with detection statistics The quality label is intended to summarize the detected structure, not to guarantee outcome quality. A higher score means the pattern aligned more closely with the script’s internal criteria. It does not mean the setup must succeed. Key Inputs The script includes adjustable inputs for both detection behavior and presentation. Key controls include: - Swing Pivot Length - Peak / Trough Equality tolerance - Minimum Pullback Between Peaks or Troughs - Minimum and Maximum Pattern Width - Minimum Quality to Display - Weighting of volume, symmetry, and pullback depth inside the quality score - Box, neckline, and pattern-label visibility - Global label size - Panel font size - Panel position - Neckline extension length - Pattern-specific alert toggles These controls make it possible to adapt the scanner to different chart densities, volatility profiles, and personal visual preferences. Limitations & Transparency This indicator is a rule-based pattern scanner. It is not a predictive engine, and it does not claim that all detected formations will lead to continuation or reversal. Classical chart structures can fail, invalidate, or behave differently depending on volatility, trend strength, liquidity conditions, timeframe, and broader market context. Pattern recognition on live charts is inherently sensitive to pivot settings and bar structure. Small changes in pivot length, equality tolerance, or minimum pullback can materially change how many formations appear. Because of that, users should treat the script as a configurable analytical framework rather than a universal template. The quality score is an internal ranking model built from the script’s own criteria. It is meant to help compare setups inside the same framework. It should not be interpreted as an objective probability model, a performance promise, or a substitute for independent trade management. Volume analysis also depends on the reliability and characteristics of the symbol’s reported data. On some instruments, volume may be less informative or behave differently than expected. Users should evaluate this in the context of their own market. Risk Disclosure This script is provided for chart analysis, workflow organization, and educational use. It does not provide financial advice, investment advice, or guaranteed trade signals. All trading and investment decisions remain the sole responsibility of the user. Reversal patterns can fail even when they appear clean and well-structured. Breaks can reverse, neckline moves can trap participants, and high-scoring formations can still underperform. Risk management, confirmation process, position sizing, and overall strategy design remain essential. Use this tool as a structured visual aid inside a broader decision-making process, not as a standalone reason to enter or exit a position.
Chỉ báo Pine Script®
của AGProLabs
4
Breakout Pattern Setup [WillyAlgoTrader]📐 Breakout Pattern Setup is an overlay indicator that automatically detects converging price channels (wedges, triangles, pennants) by fitting trendlines to confirmed pivot points using a boundary-fit algorithm, then monitors for breakouts confirmed by a 5-factor strength scoring engine — with directional probability scoring while price is inside the channel, volume contraction verification, and automatic TP/SL placement based on the measured move (channel width projected from breakout). Once a breakout fires, the trade stays open until TP3 (full measured move) or SL is reached — with trailing to breakeven after TP1. The core concept: converging channels compress volatility — when price breaks out of a narrowing range, the ensuing move tends to be proportional to the channel's maximum width. This indicator automates the entire workflow: detect pivots, fit upper and lower trendlines, verify convergence and volume contraction, score the breakout quality when it occurs, set targets based on the measured move, and track the trade to completion. 🧩 WHY THESE COMPONENTS WORK TOGETHER Manual channel drawing is subjective — two traders will draw different trendlines from the same pivots. A breakout without strength scoring treats strong and weak breaks equally. Targets without measured-move anchoring are arbitrary. This indicator chains each component into a sequential pipeline: Pivot detection → Boundary-fit algorithm (best trendline pairs) → Convergence + width + volume contraction verification → Channel visualization → Directional probability scoring → Breakout detection + 5-factor strength scoring → TP/SL from measured move → Trailing SL to breakeven after TP1 → Trade outcome tracking (win rate) The pivot detection feeds raw swing points to the boundary-fit algorithm. The algorithm tests all pivot pair combinations and selects the lines with the most touches and least deviation — producing objective, reproducible trendlines. The convergence filter ensures only narrowing channels qualify (not parallel channels or expanding formations). Volume contraction confirms the volatility squeeze is genuine. The directional score gives real-time probability before the breakout occurs. The 5-factor strength score evaluates the breakout candle itself. And the measured-move TP/SL system manages the trade from entry through breakeven trail to final outcome. 🔍 WHAT MAKES IT ORIGINAL 1️⃣ Boundary-fit trendline algorithm. The algorithm finds optimal upper and lower trendlines by exhaustive search over confirmed pivots: Upper boundary: For every pair of pivot highs (A, B) within the lookback window: — Project a line through A and B — Check all other pivot highs: none may exceed the line by more than deviationMax × ATR (no overshoots beyond tolerance) — Count how many pivot highs fall within touchTolerance × ATR of the line (touches) — Keep the pair with the most touches Lower boundary: Same process for pivot lows — no undershoot beyond tolerance, maximize touches. A trendline is projected via: y = y1 + (y2 − y1) × (x − x1) / (x2 − x1). The touch tolerance (default 0.15× ATR) and deviation maximum (default 0.3× ATR) are both ATR-normalized, adapting to the instrument's volatility. The scan runs on new pivots and every 10 bars (configurable interval), testing up to 15 recent pivots per side — producing the objectively best-fitting converging channel from available data. 2️⃣ Multi-criteria channel validation. A detected channel must pass all five checks: — 📏 Convergence : the channel is narrowing — current width < starting width. Convergence rate = 1 − (widthNow / widthStart) ≥ minConvergence (default 0.02 = at least 2% narrower) — 📐 Width range : current width ≥ minChannelWidth × ATR (not too thin) AND < 10× ATR (not too wide) — 📊 Volume contraction (when enabled): average volume inside the channel < 85% of average volume before the channel — confirms the volatility squeeze is accompanied by declining participation — 📍 Price position : previous bar's close is inside the channel (not already broken out) — ⚡ No inversion : upper boundary > lower boundary at the current bar 3️⃣ 5-factor breakout strength scoring (0–100). When price closes beyond a channel boundary: — 📏 Penetration depth (25%) : (close − boundary) / ATR, normalized to 0–1 (capped at 2× ATR). Deeper penetration = stronger commitment. — 📊 Body ratio (15%) : candle body / candle range. Full-body candles (small wicks) indicate conviction. Doji/pin bars = weak. — 📍 Body commitment (15%) : body midpoint beyond the boundary = 1.0, inside channel = 0.3. Full body commitment means the entire candle moved through, not just a wick. — 📈 Volume confirmation (25%) : volume > SMA(20) × volumeSpikeMult = 1.0, otherwise 0.4. Above-average volume on the breakout bar confirms institutional participation. — 💪 Momentum confirmation (20%) : RSI(14) > 50 for bullish (or < 50 for bearish) = 1.0, otherwise 0.4. Classification: Strong (≥ 65), Medium (35–65), Weak (< 35). The strength is displayed on the breakout label and in the dashboard. 4️⃣ Directional probability scoring (0–100) while inside channel. Before the breakout occurs, the indicator provides a real-time directional score: — 📐 Channel slope bias (35%) : midline slope normalized by ATR — upward-sloping channels bias bullish, downward bias bearish — 📊 RSI bias (35%) : (RSI − 50) / 50 — momentum direction — 📍 Position in channel (30%) : (close − lower) / width — price near upper boundary biases bullish, near lower biases bearish Score > 60% = bullish lean, < 40% = bearish lean, 40–60 = neutral. Displayed in the dashboard as "Bull Prob" — gives you a heads-up before the breakout direction is confirmed. 5️⃣ Measured-move TP/SL with trailing to breakeven. On breakout: — Target = breakout boundary + channel maximum width (the classic measured-move projection) — TP1 = entry + fullMove / 3 — TP2 = entry + fullMove × 2/3 — TP3 = entry + fullMove (full measured move) — SL = opposite channel boundary ± ATR padding (configurable, default 0) After TP1 is hit, the SL moves to breakeven (entry price) — the entry label updates to show "(SL → BE)" and the original SL label dims. Trade stays open until TP3 (full measured move) or SL is reached. TP/SL labels show percentage distance from entry and update with ✓ / ✗ markers on hit. SL has priority on same-bar conflicts (SL checked before TPs). 6️⃣ Win/loss tracking with historical statistics. The indicator tracks: total patterns detected, bull/bear breakout counts, wins (TP1 hit before SL), losses (SL hit before TP1), and win rate — all displayed in the dashboard. Two display modes: "All" (full history of all channels and trades) or "Last Only" (clean chart showing only the most recent pattern + trade, automatically cleaned up when a new pattern is detected). 7️⃣ Channel visualization with breakout color shift. Before breakout: neutral channel lines (configurable color, default yellow) with optional fill. On bullish breakout: lines and fill shift to green. On bearish breakout: lines shift to red. Channel timeout (max width bars with no breakout) resets the scanner to look for new patterns. ⚙️ HOW IT WORKS — CALCULATION FLOW Step 1 — Pivot detection: ta.pivothigh/ta.pivotlow with configurable lookback. Pivots stored in arrays (up to 60 recent, capped). Step 2 — Boundary-fit scan: On new pivot or every 10 bars (if no active channel and no open trade): test all pairs of pivot highs for upper boundary, all pairs of pivot lows for lower boundary. Select best-fit lines by maximum touches. Step 3 — Channel validation: Convergence rate ≥ minimum, width within range, volume contraction passes, price is inside, no inversion → channel activated. Step 4 — Inside-channel monitoring: Directional probability score updated each bar. Channel lines extend. Background optional. Step 5 — Breakout detection: Close beyond boundary + bar confirmed → 5-factor strength scoring → signal + TP/SL placement → channel lines recolored. Step 6 — Trade tracking: TP1/TP2/TP3 and SL hit detection with SL priority. TP1 hit → trailing SL to breakeven. TP3 or SL → trade closed, channel reset, scanner resumes. 📖 HOW TO USE 🎯 Quick start: 1. Add the indicator — it scans for converging channels automatically 2. Yellow channel lines appear when a valid pattern is detected 3. Dashboard shows "Active" + "Bull Prob" percentage 4. On breakout → "Long"/"Short" label + Entry/SL/TP1–TP3 lines appear 5. TP1 hit → SL moves to breakeven. TP3 → trade complete. 👁️ Reading the chart: — 🟡 Channel lines = active converging pattern (pre-breakout) — 🟢 Channel turns green = confirmed bullish breakout — 🔴 Channel turns red = confirmed bearish breakout — 🟢 "Long" / 🔴 "Short" label = confirmed breakout signal with strength — 🔵 Blue line = entry, 🔴 red = SL, 🟢 green dashed = TP1/TP2/TP3 — ✓ on TP labels = target hit, ✗ on SL = stopped out 📊 Dashboard fields: — Pattern: Active / Bull Break / Bear Break / Scanning — Strength: Strong / Medium / Weak (5-factor score) — Trade: Active / TP1 ✓ (BE) / TP2 ✓ / TP3 ✓ / SL Hit — Bull Prob: directional probability (0–100%) while inside channel — R:R (TP1): risk-to-reward ratio — Touches: upper/lower boundary touch counts — Vol Contraction: in-channel vs pre-channel volume ratio — Convergence: narrowing rate percentage — Patterns / Breaks / Win Rate: cumulative statistics 🔧 Tuning guide: — No patterns found: decrease Min Touches (2), increase Max Channel Width (150+), decrease Min Convergence (0.01) — Too many weak patterns: increase Min Touches (3), increase Min Channel Width ATR (0.7+) — Weak breakouts: increase Volume Spike Mult (1.5+), enable Momentum Confirmation — SL too tight: increase SL Padding (0.2–0.3 ATR) — Want clean chart: set Pattern History to "Last Only" ⚙️ KEY SETTINGS REFERENCE ⚙️ Main: — Pivot Detection Length (default 5): swing lookback — Min Touches (default 2): pivots per boundary — Max Channel Width (default 120 bars): lookback limit — Min Convergence Rate (default 0.02): narrowing threshold 🔍 Filters: — Volume Spike Mult (default 1.2): breakout bar volume requirement — Volume Contraction (default On): require declining volume in channel — Momentum Confirmation (default On): RSI alignment 🛡️ Risk: — SL Padding (default 0 ATR): buffer beyond opposite boundary — Label Offset (default 20 bars): right-side level label distance 🔧 Advanced: — Touch Tolerance (default 0.15 ATR): pivot proximity to trendline — Max Deviation (default 0.3 ATR): maximum pivot overshoot — Min Channel Width (default 0.5 ATR): filter out thin channels 📐 Channel Lines: — Show Channel Fill (default On), color and width configurable 🔔 Alerts — 🟢 BUY / 🔴 SELL — breakout with strength, entry, SL, TP1–TP3 — 🟡 PATTERN DETECTED — new channel found — 🎯 TP1 / TP2 / 🏆 TP3 HIT — trade progress — 🛑 SL HIT — stopped out All support plain text and JSON webhook format. Bar-close confirmed. ⚠️ IMPORTANT NOTES — 🚫 No repainting. All breakout signals require barstate.isconfirmed. Channel detection runs on confirmed pivots (equal left/right lookback). The boundary-fit algorithm selects the best trendlines from historical pivots — the resulting lines are objective and reproducible. — 📐 The boundary-fit algorithm tests all valid pivot pairs (up to 15 per side) and selects the combination with the most touches that satisfies the deviation constraint. This is an exhaustive search, not a linear regression — it produces the tightest-fitting boundary lines possible from the data. — ⚖️ The measured-move target (channel width projected from breakout) is the classic technical analysis projection for converging patterns. TP1/TP2/TP3 divide this move into thirds: TP1 = 33%, TP2 = 67%, TP3 = 100% of the projected move. — 📊 Volume contraction compares average volume inside the channel vs before the channel over the same number of bars. A ratio below 85% confirms genuine volatility compression. — 🔒 Once a breakout fires, the trade stays open until TP3 or SL is reached — there is no intermediate invalidation. The channel remains active while the trade is open. Channels without a breakout timeout after the max channel width in bars. — 📏 SL priority: on a bar where both SL and TP are touched, SL is checked first . After TP1, SL moves to breakeven (entry price). — 🛠️ This is a pattern detection and breakout scoring tool , not an automated trading bot. It identifies converging channels, scores breakouts, and sets measured-move targets — trade decisions remain yours. — 🌐 Works on all markets and timeframes. Volume features auto-adapt to instruments without volume data.
Chỉ báo Pine Script®
của WillyAlgoTrader
35
Trendline Breakout Indicator [Dots3Red]Trendline Breakout Indicator is an upgraded version of the existing "Trendline Breakout with Volume Confirmation ". What is this indicator for? The indicator is built to automatically detect and visualize trending price channels, both bullish and bearish . It draws channels (or polygons, optionally) across pivot-based trendlines, tracks them in real time, and signals when price breaks out of them with a certain N% (can be confirmed by volume activity too). How does it work? The indicator identifies pivot highs and lows of a configurable length. Consecutive pivots of the same type (lows for bullish, highs for bearish) form a trendline. Each trendline is then extended bar by bar until the price breaks it. Channel mode draws a parallel channel around the trendline, where the channel width is determined by the maximum price deviation from the trendline within the channel's range - not a fixed offset. This means every channel is fitted to actual price behavior. Polygon mode instead fills the area between the trendline and the extreme price reached within it, giving a triangular wedge shape that highlights price compression. Channels are color-coded: cyan/teal for bullish, red/pink for bearish . Breakout Detection A breakout is confirmed when: For bullish channels : price closes below the lower trendline by more than the configured Breakout % For bearish channels : price closes above the upper trendline by more than the configured Breakout % When a breakout occurs, the channel is frozen and drawn at its final shape. A BO▲ / BO▼ label marks the breakout bar. Only channels that have persisted for at least the configured minimum length (in bars) are drawn - this filters out insignificant short-lived moves Volume Confirmation Volume is measured relative to its 20-bar moving average. When volume at the breakout bar exceeds the Volume % Breakout threshold, a bar visualization is drawn at the breakout point. Key Inputs C hannel / Polygon - Switch between channel and polygon visualization mode Breakout % - How far price must close beyond the trendline to confirm a breakout Slope Factor - Minimum slope required for a trendline to be considered a valid trend Pivot Length - Lookback length for pivot high/low detection Channel Min Length - Minimum bar length a channel must reach before being drawn Volume % Breakout - Volume spike threshold relative to the 20-bar average (can be toggle on/off) The code has been cleaned so as not to contain duplicate execution functions. Example Above is the Trendline analysis of the Nvidia stock behaviour. The following configurable parameters have been chosen: 2.5% for price break out 1.02 for slope factor 3 for Pivot length 20 for min channel's length 30% for min volume % breakout indicaton It is interesting to observe what happens when two opposite channels overlap. From Jan 2025 to mid May 2025, the stock was in a clear bearish channel, yet a bullish channel started to develop since April 2025. The bearish channel got broken on May 13, 2025, at the time when the bullish channel had already been established - a more powerful signal to enter long. Changing indicator settings might give different visual interpretations, especially the slope factor and the minimum pivot length.
Chỉ báo Pine Script®
của Dots3Red
2
Trendline Breakout with Volume Confirmation [Dots3Red]Financial markets generally move in trends or sideways ranges. The core idea of this indicator is to detect bearish trendline channels and highlight potential breakout events. How it Works This indicator automatically detects descending trendline channels by dynamically analyzing pivot highs. Consecutive descending pivots are used to form bearish trendlines, which are then extended forward as the market evolves. Once a valid trendline or channel is detected, the script continuously monitors its status. When price breaks above the upper boundary of the descending trendline/channel, the breakout is detected and the completed structure is drawn on the chart together with a visual breakout label. A breakout is considered valid when the closing price exceeds the upper boundary of the trendline by a configurable percentage ( Breakout %) . When a valid trendline is detected on real-time bars but has not yet been broken, the indicator will project the channel forward into the future to help visualize potential breakout zones. Visual Styles The indicator provides two visualization modes: Channel (default) – Displays the full channel area between the trendline and its lower boundary. Polygon – Displays the detected structure as a polygon, which can make overlapping structures easier to distinguish. Volume Confirmation The indicator can optionally display volume confirmation during breakout events. When enabled, a normalized volume bar is drawn near the breakout location to indicate the relative strength of the breakout based on volume activity. Settings Boolean Options Channel / Polygon Display – Choose how the detected structure is visualized. Show Volume Breakout Bar – Enables or disables volume confirmation visualization. Numerical Parameters Breakout % – Minimum percentage the closing price must exceed the trendline to confirm a breakout. Slope Factor – Controls how steep the detected trendline must be. Pivot Length – Number of bars to the left and right used to determine pivot points. Volume % Breakout – Minimum relative volume required to display a breakout volume bar. Why Use Polygon Mode? When multiple channels appear close to each other, the chart may become visually crowded. In such situations, the polygon mode can provide a clearer representation of overlapping structures. For example, in the chart above for Palantir Technologies during the summer of 2023, two separate trendlines were detected in June and August. Their baselines were very similar, which resulted in channels having almost identical lows. Switching to polygon mode makes the structure easier to interpret. Example:
Chỉ báo Pine Script®
của Dots3Red
The Strat - Multi-Timeframe Combo Analyzer## 📊 The Strat - Multi-Timeframe Combo Analyzer This open-source indicator implements **The Strat** methodology, a universal price action framework developed by Rob Smith (@RobInTheBlack). --- ### 🎯 What is The Strat? The Strat categorizes every candle into one of three scenarios based on its relationship to the previous bar: | Type | Name | Definition | |------|------|------------| | **1** | Inside Bar | High < Previous High AND Low > Previous Low | | **2** | Directional | Breaks only one side (2↑ = broke high, 2↓ = broke low) | | **3** | Outside Bar | Breaks BOTH previous high AND low | By tracking these bar types across timeframes, traders can identify actionable setups with defined entry triggers and target levels. --- ### ✨ Features **Daily Timeframe Analysis:** - Real-time 3-bar combo detection (2-1-2, 3-1-2, 1-2-2, etc.) - Pattern classification: Bullish/Bearish Continuation or Reversal - Entry and Target levels based on Strat rules - Pattern status: ACTIONABLE, IN-FORCE, TRIGGERED, or WATCHING **ATR Context:** - Range % used (how much of daily ATR has been consumed) - Entry quality assessment (Excellent → Exhausted) - Day type classification (Quiet → Trend Day) - Remaining range estimation **15-Minute Analysis:** - Separate combo tracking for intraday precision - Pattern detection on lower timeframe **Visuals:** - Customizable info tables - Entry/Target horizontal lines - Signal labels on chart - Alert conditions --- ### 🔧 How to Use 1. Look for **ACTIONABLE** patterns - these are setups waiting for a trigger 2. Entry triggers when price breaks the designated level 3. Target is the next logical Strat level (typically prior bar's high/low) 4. Use **Range%** to assess if there's room left in the daily range 5. Combine Daily and 15-Min combos for trade confluence --- ### ⚠️ Disclaimer This indicator is for **educational purposes only**. It does not constitute financial advice or guarantee profitable trades. Trading involves substantial risk of loss. Past performance is not indicative of future results. Always conduct your own research and trade responsibly. --- ### 🙏 Credits **The Strat** methodology was created by Rob Smith (@RobInTheBlack). This implementation is open-source. Feel free to study, modify, and improve the code!
Chỉ báo Pine Script®
của StonkTrader4
4