roses27

Open Close Cross Strategy plus Explorer

roses27 Cập nhật   
Open Close Cross Strategy plus Explorer
V 1.0
There is a code that can control sensitivity. try to change 'ATR Multiplier' menu
There is a code for prevent 'repaint'. If you want it check 'Forces Non-Repainting' menu

thanks to
PMax Explorer STRATEGY & SCREENER KivancOzbilgic
Open Close Cross Strategy R5 revised by JustUncleL JustUncleL
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.01
1. Explorer code error correction
2. Change menu order
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer 1.04

1. remove 'Use Alternate Resolution?' menu

2. change 'Multiplier for Alternate Resolution('1' is original = screen resolution)' menu

3. change 'Forces to Non-Repainting'
0 : Repainting allowed. - Quick responsiveness. you can respond to a tick. You can get a lot of signals.

1 : If 'Multiplier for Alternate Resolution' is '5' Repainting can occur 5 times or 0 times in one cycle
- Quick responsiveness and Relatively safe to use.

2 : Repainting is not allowed but you will wait for one cycle to see result.
If 'Screen resolution = 5 min' * 'Multiplier for Alternate Resolution = 5' You should wait 25 min.
- Slow responsiveness and you can lose your chance 'in' and 'out'.

4. clear up the coding


Real-time bar VS History bar

The difference between real-time and historical bar calculations

If you set 'Multiplier for Alternate Resolution' to '5' in historical bar
The signal is located at the beginning of the cycle.

If you set 'Multiplier for Alternate Resolution' to '5' in real-time bar
The signal is located at where the signal came from.

It is not Repainting.
This is how 'tradingview' deals with data.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.06

1. Explorer bugs fixed.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.1

1. add profit% : Profit fluctuations since signal generated until now.

2. add Profit change rate : 100 * Profit fluctuations% / min

3. change some code to to make it short.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.12

1. Remove Dealer Code from Screen Output

2. more input for Coins and Stocks
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.14

1. Remove "Change ATR Calculation Method sma(tr)->atr?"

2. Add 'bars' at screen output. It can be compared to the information in the strategy test window.
'bars' indicates how many 'bars' have passed since the signal occurred.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.16

1. Correcting repainting defense algorithm error. thanks @dARgible
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.18

1. The default value of the stock item is blank.

2. The screen label corrected an error that does not show the front digit when the fluctuation width is over 100%.

3. I have put in a notification message to facilitate the modification of the source code.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.2

1. Add Sorting Function "Label Sort by: ", options=

2. Label Text Alignment

3. Speed up
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.22

1. Menu changed

2. Label Text Alignment

3. Display Sorting Function by under line at Label

Profit%, 'CgRate'
--------
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer 1.24

1. Label Text Alignment

2. Slightly changed historical bar calculations.

3. Slightly changed trend data calculations.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.26

1. add 'Remove Currency Display' menu
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.28

1. Correct errors in 'String Manipulation'
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.30

1. Tradingview data structure has changed. And 'f_security' function changed

2. Change 'Label Position y-axis(ohlc4 * %/100)' menu. See tooltips

2, Add tooltips.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.31

1. add 'process_orders_on_close = true' option for a quick decision

2. "Forces to Non-Repainting", options= revived
I don't know if the real-time data from the source is blocked only free users.
Free users will be provided with data that has been closed past the timeframe.period..
I don't understand the situation of paid users.

I'll leave it up to the user's choice.

If real-time data is blocked for all users, selecting '1" results in twice the delay of the 'timeframe.period'.


3. Before using this strategy.

In Strategy Tester window

Net Profit : as high as possible
Total Closed Trades : as little as possible
Percent Profitable : as high as possible
Profit Factor : as high as possible
Avg Trade : as high as possible. 1.1 percent this is not acceptable.
Avg # Bars in Trades : lager than 4 * (Multiplier for Alternate Resolution)
~10 Bars such things are not good to acceptable.

I saw a video of denigrating the algorithm by setting the 'Avg # Bars in Trades' to 2.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.32

Tradingview data structure has NOT changed.
My mistake.

1. set 'calc_on_every_tick=true'
Label data is updated in real time.

2. The code went back to the old days.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.34

1. Corrects errors that do not reflect 'Forces to Non-Repainting' menu changes in backtesting.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.36

1. Fixed an error with multiple id00s visible.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.38

1. When using strategy on a mobile phone, with 'calc_on_every_tick=true' the program will stops.
Default value is false.

2. OCCmax function slightly changed
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.4

1. V 1.36, V 1.38 has sorting error. corrected
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.42

1. clear up the coding
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.421

1. Fix errors in long-term resolution calculations
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.43

1. Error corrected ALMA, LSMA

2. If you feel the strategy is slow, modify the code and use it.

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////
// //
// If you don't want a , comment or delete the line below all. //
// //
//////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.431

0. for Fix Release Note Error

1. Error corrected ALMA, LSMA

2. If you feel the strategy is slow, modify the code and use it.

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////
// //
// If you don't want a 'screen label', comment or delete the line below all. //
// //
//////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.44

1. Error corrected ALMA, LSMA

2. Before applying this strategy to your actual investment, please go through a lot of simulations.

3. 'Forces To Non-Repainting' options '0' and '1' must have repainting.

4. The information displayed on the label contains at least as many delays as 'Alternate Resolution'.
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.46

1. Add 'Trail stop loss prices %'
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.462

1. Allow empty space in the 'Remove Currency Display' menu
Phát hành các Ghi chú:
Open Close Cross Strategy plus Explorer V 1.464

1. Slightly modified the'OCCmax' function.
Mã nguồn mở

Với tinh thần TradingView, tác giả của tập lệnh này đã xuất bản nó dưới dạng mã nguồn mở, vì vậy các nhà giao dịch có thể hiểu và xác minh nó. Chúc mừng tác giả! Bạn có thể sử dụng mã này miễn phí, nhưng việc sử dụng lại mã này trong một ấn phẩm chịu sự điều chỉnh của Nội quy nội bộ. Bạn có thể yêu thích nó để sử dụng nó trên biểu đồ.

Thông báo miễn trừ trách nhiệm

Thông tin và ấn phẩm không có nghĩa là và không cấu thành, tài chính, đầu tư, kinh doanh, hoặc các loại lời khuyên hoặc khuyến nghị khác được cung cấp hoặc xác nhận bởi TradingView. Đọc thêm trong Điều khoản sử dụng.

Bạn muốn sử dụng tập lệnh này trên biểu đồ?