Bắt đầu

Các mẫu biểu đồ

Dual Pivot StructureDual Pivot Structure: Speed vs. Stability Overview This script is an experimental prototype designed to solve the most common frustration with Market Structure indicators: The Trade-off between Lag and Noise. In traditional Price Action analysis, verifying a Pivot High or Low requires waiting for X number of candles to close. High Lookback (e.g., 5 bars): Reliable structure, but the signal appears too late to trade. Low Lookback (e.g., 1 bar): Fast signals, but prone to "fake-outs" and noise. This indicator runs both logic systems simultaneously, allowing traders to see the "True" market structure while receiving "Early Warning" signals for potential entries. How It Works The script calculates two parallel layers of market data: 1. The "Structure" Layer (Slow & Reliable) Uses a standard, higher lookback period (Default: 5 Left / 5 Right). Purpose: Defines the macro trend. It labels confirmed Higher Highs (HH), Lower Lows (LL), etc. Visual: Solid colored labels. These confirm the trend bias. 2. The "Signal" Layer (Fast & Actionable) Uses a rapid, minimal lookback period (Default: 1 Left / 1 Right). Purpose: Hunts for potential reversals within the macro trend. Logic: If the Macro Trend is bullish, but price pulls back, this layer looks for a "Micro Pivot" that is higher than the previous Macro Low. Visual: Orange "⚠ HL?" or "⚠ LH?" text. How to Use This Script This tool is best used to time entries within an established trend. Identify the Trend: Look at the Solid Labels (Green/Red). Are we making HHs and HLs? The trend is Up. Wait for the Pullback: Allow price to retrace. Watch for the Early Warning: Look for the orange "⚠ HL?" text. This appears bars before the structural pivot is confirmed. The Signal: This is your aggressive entry trigger or alert to watch for a lower timeframe change of character. Confirmation: If price continues in your direction, the script will eventually print a solid HL label, confirming your early entry was correct. Settings Structure Settings: Controls the sensitivity of the main trend (Default: 5/5). Increase this for higher timeframes to filter noise. Signal Settings: Controls the sensitivity of the early warnings (Default: 1/1). Keep this low for maximum speed. Visuals: Toggle the "Early Warning" labels on/off and customize colors to fit your chart theme. Disclaimer This script is a prototype for educational purposes. The "Early Warning" signals are, by definition, unconfirmed and carry higher risk. Always manage risk accordingly.
Chỉ báo Pine Script®
của SaltyCod
Liquidity Entry Triggers (4-Model System) | WarRoomXYZLiquidity Entry Triggers is an open-source, price-action-based analytical framework designed to highlight recurring institutional liquidity behaviors that appear across all liquid markets. The script focuses on how and where liquidity is taken, rather than attempting to predict direction using oscillators or lagging indicators. It is optimized for XAUUSD, FX pairs, indices, and crypto , particularly on 1m–15m timeframes where session behavior and liquidity reactions are most visible. This tool is not a buy/sell signal generator . It provides contextual entry zones based on structural liquidity logic, allowing traders to apply their own execution rules. Core Philosophy Markets move because of: •Trapped traders •Forced liquidations •Session-based liquidity cycles •Reactions at prior institutional participation zones This script visualizes four repeatable entry triggers that emerge from those mechanisms. 🔹 1. Failed Breakout / Trapped Trader Model When price breaks a clearly defined range high or low, breakout traders often enter expecting continuation. If price fails to hold outside the range and closes back inside, those traders become trapped. The script detects: •Breaks beyond recent highs/lows •Immediate rejection back into the range •Structural failure of momentum These conditions frequently lead to mean reversion or reversal moves as trapped traders exit and fuel movement in the opposite direction. Markers are plotted at the point of failure to highlight potential trap zones. 🔹 2. Liquidation Flush Detection Sharp impulsive candles with abnormally large wicks often represent liquidation cascades rather than healthy trend continuation. The script identifies liquidation behavior by measuring: •Wick-to-body imbalance •Sudden expansion followed by rejection •Temporary price inefficiencies These flushes commonly occur near: •Session highs/lows •Range extremes •Trend exhaustion points Such events often lead to rebalance moves , where price partially or fully fills the wick. 🔹 3. Orderblock Reaction Zones Orderblocks represent areas where heavy participation occurred before a strong displacement move. The script highlights: •Clean bullish and bearish orderblock structures •Zones formed during consolidation prior to expansion •Areas likely to be defended when revisited Orderblocks with minimal noise and clean departure are prioritized, as they often reflect institutional positioning rather than retail activity. These zones are intended as reaction areas , not automatic entry signals. 🔹 4. London Session Liquidity Sweep Model The London session frequently establishes the initial daily high or low. Later in the session or during New York, price often: •Sweeps internal liquidity around that level •Rejects after the sweep •Continues with the higher-timeframe bias The script monitors London session behavior and marks: •Liquidity runs above/below London highs and lows •Rejections back inside the prior structure This model is especially effective when combined with broader daily context. 🔹4. How the Components Work Together The framework is designed as a context stack , not a checklist of signals: Liquidity Event → Location → Timing → Trader Execution Each model reinforces the others: •Failed breakouts often occur after liquidity sweeps •Liquidation wicks frequently form near orderblocks •London sweeps often trigger failed momentum moves •Confluence increases probability, not certainty 🔹 Practical Usage Guide ✔ Identify context Determine whether price is approaching a range extreme, session level, or prior participation zone. ✔ Wait for a liquidity event Look for a sweep, failed breakout, or liquidation wick. ✔ Observe reaction Rejection, displacement, or reclaim behavior provides confirmation. ✔ Execute manually Stops are commonly placed beyond the liquidity extreme. Targets are typically internal liquidity, prior highs/lows, or imbalance zones. The indicator does not manage trades or enforce rules. Execution and risk management remain the trader’s responsibility. 🔹 5. Originality & Design Notes This script does not replicate or bundle existing indicators. It introduces: •A multi-model liquidity entry framework •Structural failed breakout detection •Wick-based liquidation imbalance logic •Session-aware liquidity sweep visualization •A unified, minimal, non-lagging design All concepts are based on observable market behavior and integrated into a single analytical tool. 🔹 6. Suitable Markets & Timeframes Works best on: •XAUUSD •Major FX pairs •Indices •Liquid crypto markets Recommended timeframes: •1m •5m •15m •30m 🔹7. Limitations & Notes •This is an analytical framework , not a trading system •All markings are confirmed at candle close (non-repainting) •No open interest or order flow data is used •Results depend on user interpretation and execution •Best used alongside session bias and higher-timeframe structure Disclaimer This script is provided for educational and informational purposes only. It does not constitute financial advice, investment advice, or a recommendation to buy or sell any instrument. Trading involves risk, and losses can exceed initial deposits. The author assumes no responsibility for trading decisions made using this tool. Users are strongly encouraged to test this script in demo or simulation environments and to apply proper risk management, position sizing, and personal discretion at all times. By using this script, you acknowledge and accept all associated risks.
Chỉ báo Pine Script®
của WarroomXYZ
Trend detection zero lag Trend Detection Zero-Lag (v6) Trend Detection Zero-Lag is a high-performance trend identification indicator designed for intraday traders, scalpers, and swing traders who require fast trend recognition with minimal lag. It combines a zero-lag Hull Moving Average, slope analysis, swing structure logic, and adaptive volatility sensitivity to deliver early yet stable trend signals. This indicator is optimized for real-time decision-making, particularly in fast markets where traditional moving averages react too slowly. Core Features 🔹 Zero-Lag Trend Engine Uses a Zero-Lag Hull Moving Average (HMA) to reduce lag by approximately 40–60% versus standard moving averages. Provides earlier trend shifts while maintaining smoothness. 🔹 Multi-Factor Trend Detection Trend direction is determined using a hybrid engine: HMA slope (momentum direction) Rising / falling confirmation Swing structure detection (HH/HL vs LH/LL) ATR-adjusted dynamic sensitivity This approach allows fast flips when conditions change, without excessive noise. Adaptive Volatility Sensitivity Sensitivity dynamically adjusts based on ATR relative to price In high volatility: faster reaction In low volatility: smoother, more stable trend state This ensures the indicator adapts across: Trend days Range days Volatility expansion or contraction Trend Duration Intelligence The indicator tracks historical trend durations and maintains a rolling memory of recent bullish and bearish phases. From this, it calculates: Current trend duration Average historical duration for the active trend direction This helps traders gauge: Whether a trend is early, mature, or extended Probability of continuation vs exhaustion Strength Scoring A normalized Trend Strength Score (0–100) is calculated using: Zero-lag slope magnitude ATR normalization This provides a quick read on: Weak / choppy trends Healthy trend continuation Overextended momentum Visual Design Color-coded Zero-Lag HMA Bullish trend → user-defined bullish color Bearish trend → user-defined bearish color Designed for dark mode / neon-style charts Clean overlay with no clutter Trend Detection Zero-Lag is built for traders who need: Faster trend recognition Adaptive behavior across market regimes Structural confirmation beyond simple moving averages Clear, actionable visual signals
Chỉ báo Pine Script®
của MomentumCraft_
Helix Protocol 7Helix Protocol 7 Overview Helix Protocol 7 is a trend-adaptive signal engine that automatically adjusts its buy and sell criteria based on current market conditions. Rather than using fixed thresholds that work well in some environments but fail in others, Helix detects whether the market is in a strong uptrend, neutral consolidation, or downtrend, then applies the appropriate signal parameters for each state. This adaptive approach helps traders buy dips aggressively in confirmed uptrends while requiring much stricter conditions before buying in downtrends. Core Philosophy The fundamental insight behind Helix is that the same indicator readings mean different things in different market contexts. An RSI of 45 during a strong uptrend represents a healthy pullback and buying opportunity. That same RSI of 45 during a confirmed downtrend might just be a brief pause before further decline. Helix encodes this context-awareness directly into its signal logic. The Money Line At the center of the indicator is the Money Line, which can be configured as either a linear regression line or a weighted combination of exponential moving averages. Linear regression provides a mathematically optimal fit through recent price data, while the weighted EMA option offers more responsiveness to recent price action. The slope of the Money Line determines whether the immediate price trend is bullish, bearish, or neutral, which affects the color of the bands and cloud shading. Dynamic Envelope Bands Upper and lower bands are calculated using Average True Range multiplied by a dynamic factor. When ADX indicates trending conditions, the bands automatically widen to accommodate larger price swings. The Chaikin Accumulation/Distribution indicator also influences band width, with strong accumulation or distribution causing additional band expansion. This dual adaptation helps the bands remain relevant across different volatility regimes. Trend State Detection Helix classifies market conditions into four distinct states using a combination of ADX behavior and Directional Movement analysis. Strong Uptrend requires ADX to be rising (gaining momentum), ADX value above a threshold (default 25), and the positive directional indicator exceeding the negative. This combination confirms not just that price is rising, but that the trend is strengthening. Strong Downtrend uses the same ADX requirements but with the negative directional indicator dominant. This identifies accelerating downward momentum. Weak Downtrend is detected when ADX is falling (trend losing steam) but negative DI still exceeds positive DI. This often represents the exhaustion phase of a decline. Neutral applies when none of the above conditions are met, typically during consolidation or when directional indicators are close together. Adaptive Signal Thresholds The indicator uses Fisher Transform and RSI as its primary oscillators, but the trigger levels change based on trend state. During Strong Uptrend, buy conditions are relaxed significantly. The Fisher threshold might be set to 1.0 (only slightly below neutral) and RSI to 50, allowing entries on minor pullbacks within the established trend. Sell conditions are tightened, requiring Fisher above 2.5 and RSI above 70, letting winning positions run longer. During Neutral conditions, both buy and sell thresholds return to traditional oversold and overbought levels. Fisher must reach -2.0 for buys and +2.0 for sells, with RSI requirements around 30 and 65 respectively. During Downtrend, buy conditions become very strict. Fisher must reach extreme oversold levels like -2.5 and RSI must drop below 25, ensuring buys only trigger on genuine capitulation. Sell conditions are loosened, allowing exits on any meaningful bounce. This asymmetric approach embodies the trading principle of being aggressive when conditions favor you and defensive when they do not. Band Touch Signals In addition to oscillator-based signals, Helix generates signals when price touches the dynamic bands. A touch of the lower band indicates potential support and generates a buy signal. A touch of the upper band suggests potential resistance and generates a sell signal. These band-based signals work alongside the oscillator signals, providing entries even when Fisher and RSI have not reached their thresholds. Extreme Move Detection Sometimes price moves so violently that it penetrates the bands by an unusual amount. Helix measures this penetration depth as a percentage of ATR and can flag these as "extreme" signals. Extreme signals have special properties: they can fire intra-bar (before the candle closes) to catch wick entries, they can bypass normal cooldown periods, and they can optionally bypass volatility freezes. This allows the indicator to capture panic selling events that might be missed by waiting for candle closes. Cascade Protection System A critical feature for risk management is the built-in cascade protection that prevents averaging down into oblivion. The system has two components. First, it tracks Bollinger Band Width Percentile, which measures current volatility relative to its historical range. When BBWP exceeds a threshold (default 92%), indicating a volatility spike often associated with sharp directional moves, all buy signals are temporarily frozen. This prevents entries during the most dangerous market conditions. Second, it counts consecutive buy signals without an intervening sell. After reaching the maximum (default 3), no additional buy signals are generated until a sell occurs. This absolute limit prevents the common mistake of repeatedly buying a falling asset. The protection status is displayed in the information panel, showing current BBWP level and the consecutive buy count. RSI Divergence Detection Helix includes automatic detection of RSI divergences, which often precede trend reversals. Regular bullish divergence occurs when price makes a lower low but RSI makes a higher low, suggesting weakening downside momentum. Regular bearish divergence is the opposite pattern at tops. Hidden divergences, which suggest trend continuation rather than reversal, are also detected and can be displayed optionally. Divergence lines are drawn directly on the price chart connecting the relevant pivot points. Signal Cooldown To prevent signal clustering and overtrading, a configurable cooldown period prevents new signals for a set number of bars after each signal. This ensures each signal represents a distinct trading opportunity. Visual Components The indicator provides comprehensive visual feedback. The Money Line changes color based on slope direction. The cloud shading between bands reflects trend bias. An ADX bar at the bottom of the chart uses color coding to show trend state at a glance: lime for strong uptrend, red for downtrend, white for ranging (very low ADX), orange for flat, and blue for trending but not yet strong. Price labels appear at signal locations showing the entry or exit price, the trigger type (band touch, uptrend dip, capitulation, etc.), and the current position in the consecutive buy count. The information panel displays current trend state, divergence status, BBWP freeze status, buy counter, ADX with direction arrow, DI spread, Fisher and RSI values, and the current active thresholds for buy and sell signals. A compact mode is available for mobile devices. How to Use In strong uptrends, look for buy signals on pullbacks to the Money Line or lower band. The relaxed thresholds will generate more frequent entries, which is appropriate when trend momentum is confirmed. Consider letting sell signals pass if the trend remains strong. In neutral markets, treat signals more selectively. Both buy and sell signals require significant oscillator extremes, making them higher-probability but less frequent. In downtrends, exercise extreme caution with buy signals. The strict requirements mean buys only trigger on major oversold conditions. Respect sell signals promptly, as the loosened thresholds are designed to protect capital. Always monitor the cascade protection status. If BBWP shows frozen or the buy counter is at maximum, the indicator is warning you that conditions are dangerous for new long entries. Settings Guidance The default settings are calibrated for cryptocurrency markets on 5-minute timeframes. For other assets or timeframes, consider adjusting the ADX threshold for strong trend detection (lower for less volatile assets), the Fisher and RSI thresholds for each trend state, and the BBWP freeze level based on the asset's typical volatility profile. The indicator includes a debug panel that can be enabled to show the detailed state of all conditions, useful for understanding why signals are or are not firing.
Chỉ báo Pine Script®
của ralis24
ORB + FVG + PDH/PDL ORB + FVG + PDH/PDL is an all-in-one day-trading overlay that plots: Opening Range (ORB) high/low with optional box and extension Fair Value Gaps (FVG) with optional “unmitigated” levels + mitigation lines Previous Day High/Low history (PDH/PDL) drawn as one-day segments (yesterday’s levels plotted across today’s session only) Includes presets (ORB only / FVG only / Both) and optional alerts for ORB touches, ORB break + retest, FVG entry, and PDH/PDL touches.
Chỉ báo Pine Script®
của JDJerde
DR/IDR Break .5 TPDR/IDR Extension Breakout with Custom Stop This strategy is a systematic, counter-trend, and momentum-based system designed for intraday trading. It operates on the principle of an Opening Range Breakout (ORB), utilizing the initial market consolidation to project high-probability targets, while offering multiple methods for managing risk. 1. Market Identification (The Opening Range) The strategy begins by defining the market's initial boundaries and volatility: Session Window: The strategy calculates the Opening Range (OR) over a user-defined time period (default: 9:30 AM to 10:30 AM New York Time). ORB Levels: Two key price levels are established and locked once the time window closes: Wick High/Low: The absolute highest and lowest prices of the session. These serve as the entry trigger lines. Body High/Low (Shaded Range): The highest and lowest open/close prices of the session. The height of this range is used to calculate the Take Profit and Stop Loss levels. 2. Entry Rule (The Breakout) The strategy is passive until the range is violated, looking for a strong move out of the consolidation area. Trigger Condition: A trade is signaled when a candle closes either: Above the Wick High (for a Long entry). Below the Wick Low (for a Short entry). Execution: The entry is a Market Order executed on the candle that meets the trigger condition, subject to a user-defined Entry Delay (default 0 bars, meaning the entry is taken immediately upon the breakout candle's close). Direction Control: The user can select to trade Long Only, Short Only, or Both. 3. Exit and Risk Management All trades are placed with simultaneous Take Profit and Stop Loss orders (a bracket order) once the entry is filled. A. Take Profit (TP) The Take Profit is set at the 0.5 Extension of the Shaded Range (Body Range). Calculation: The distance from the Body High/Low to the TP level is exactly 50% of the total height of the Shaded Range. B. Stop Loss (SL) The Stop Loss is dynamically calculated based on a user-selected method for risk control: Range 0.5 (Body Range): The Stop Loss is placed an equal distance (0.5 times the Body Range height) outside the opposite side of the Body Range. Example (Long): If entry is above the Wick High, the SL is set 0.5 times the Body Range height below the Body Low. ATR Multiple: The Stop Loss distance is determined by the asset's recent volatility. Calculation: The distance is calculated as a user-defined Multiplier (default 2.0) times the Average True Range (ATR). Recent Swing Low/High: The Stop Loss is placed based on a structural level defined by recent price action. Long Entry: SL is placed at the Lowest Swing Low within a user-defined lookback period. Short Entry: SL is placed at the Highest Swing High within a user-defined lookback period. Summary of Workflow The market sets the Wick and Body boundaries (e.g., 9:30–10:30 AM). Price breaks and closes beyond a Wick boundary, triggering a signal. The trade enters after the specified delay. A bracket order is placed: TP is fixed at the 0.5 Extension, and SL is set based on the user's chosen risk method. The trade is closed upon reaching either the TP or the SL level.
Chiến lược Pine Script®
của ChadAnt
Liquidity Sweep + FVG Entry Model//@version=5 indicator("Liquidity Sweep + FVG Entry Model", overlay = true, max_labels_count = 500, max_lines_count = 500) // Just to confirm indicator is loaded, always plot close: plot(close, color = color.new(color.white, 0)) // ───────────────────────────────────────────── // PARAMETERS // ───────────────────────────────────────────── len = input.int(5, "Liquidity Lookback") tpMultiplier = input.float(2.0, "TP Distance Multiplier") // ───────────────────────────────────────────── // LIQUIDITY SWEEP DETECTION // ───────────────────────────────────────────── lowestPrev = ta.lowest(low, len) highestPrev = ta.highest(high, len) sweepLow = low < lowestPrev and close > lowestPrev sweepHigh = high > highestPrev and close < highestPrev // Plot liquidity levels plot(lowestPrev, "Liquidity Low", color = color.new(color.blue, 40), style = plot.style_line) plot(highestPrev, "Liquidity High", color = color.new(color.red, 40), style = plot.style_line) // ───────────────────────────────────────────── // DISPLACEMENT DETECTION // ───────────────────────────────────────────── bullDisp = sweepLow and close > open and close > close bearDisp = sweepHigh and close < open and close < close // ───────────────────────────────────────────── // FAIR VALUE GAP (FVG) // ───────────────────────────────────────────── bullFVG = low > high bearFVG = high < low // we’ll store the last FVG lines var line fvgTop = na var line fvgBottom = na // clear old FVG lines when new one appears if bullFVG or bearFVG if not na(fvgTop) line.delete(fvgTop) if not na(fvgBottom) line.delete(fvgBottom) // Bullish FVG box if bullFVG fvgTop := line.new(bar_index , high , bar_index, high , extend = extend.right, color = color.new(color.green, 60)) fvgBottom := line.new(bar_index , low, bar_index, low, extend = extend.right, color = color.new(color.green, 60)) // Bearish FVG box if bearFVG fvgTop := line.new(bar_index , low , bar_index, low , extend = extend.right, color = color.new(color.red, 60)) fvgBottom := line.new(bar_index , high, bar_index, high, extend = extend.right, color = color.new(color.red, 60)) // ───────────────────────────────────────────── // ENTRY, SL, TP CONDITIONS // ───────────────────────────────────────────── var line slLine = na var line tp1Line = na var line tp2Line = na f_deleteLineIfExists(line_id) => if not na(line_id) line.delete(line_id) if bullDisp and bullFVG sl = low tp1 = close + (close - sl) * tpMultiplier tp2 = close + (close - sl) * (tpMultiplier * 1.5) f_deleteLineIfExists(slLine) f_deleteLineIfExists(tp1Line) f_deleteLineIfExists(tp2Line) slLine := line.new(bar_index, sl, bar_index + 1, sl, extend = extend.right, color = color.red) tp1Line := line.new(bar_index, tp1, bar_index + 1, tp1, extend = extend.right, color = color.green) tp2Line := line.new(bar_index, tp2, bar_index + 1, tp2, extend = extend.right, color = color.green) label.new(bar_index, close, "BUY Entry FVG Retest SL Below Sweep", style = label.style_label_up, color = color.new(color.green, 0), textcolor = color.white) if bearDisp and bearFVG sl = high tp1 = close - (sl - close) * tpMultiplier tp2 = close - (sl - close) * (tpMultiplier * 1.5) f_deleteLineIfExists(slLine) f_deleteLineIfExists(tp1Line) f_deleteLineIfExists(tp2Line) slLine := line.new(bar_index, sl, bar_index + 1, sl, extend = extend.right, color = color.red) tp1Line := line.new(bar_index, tp1, bar_index + 1, tp1, extend = extend.right, color = color.green) tp2Line := line.new(bar_index, tp2, bar_index + 1, tp2, extend = extend.right, color = color.green) label.new(bar_index, close, "SELL Entry FVG Retest SL Above Sweep", style = label.style_label_down, color = color.new(color.red, 0), textcolor = color.white)
Chỉ báo Pine Script®
của Acoounts19071
Dynamische Open/Close Levels mit Historie🎯 Key Features This indicator provides clean, configurable horizontal lines showing the Open and Close prices of a higher chosen timeframe (e.g., the last 5-minute candle), serving as dynamic support and resistance levels. Unlike traditional indicators that draw messy "steps" across your entire chart, this tool is designed for clarity and precise control. Controlled History: Easily define how many of the last completed periods (e.g., 5-minute blocks) should remain visible on the chart. Set to 0 for only the current, active levels. No Stepladder Effect: Uses advanced drawing methods (line.new and object management) to ensure the historical levels remain static and do not clutter your chart history. Dynamic Labels: The labels (e.g., "Open (5)") automatically adjust to show the timeframe you configured in the indicator settings, eliminating confusion when switching timeframes. Customizable: Full control over colors, line length, and label positioning/size. 💡 Ideal Use Case Perfect for scalpers and day traders operating on lower timeframes (1m, 3m) who want to quickly visualize and respect crucial price action levels from a higher context (e.g., 5m, 15m, 1h).
Chỉ báo Pine Script®
của NISHLR
SMC IndicatorTitle: Smart Money Concepts Market Structure Description: This is a technical analysis tool designed to map Market Structure using Smart Money Concepts (SMC) logic. Unlike standard ZigZag indicators that often clutter the chart with repainting lines, this script focuses on delivering a clean, objective view of Trend Structure (Highs/Lows) and Structural Breaks. The Problem It Solves: Traders often struggle to identify the valid "Swing High" or "Swing Low" in real-time. This indicator automates that process using a non-repainting detection engine, helping traders objectively spot Trend Continuations (BoS) and Potential Reversals (CHoCH). How It Works: 1. Pivot Detection (The ZigZag Engine): The script identifies Swing Points based on a user-defined Depth and Deviation %. High (H): A peak is confirmed when price retraces by the deviation percentage. Low (L): A trough is confirmed when price rallies by the deviation percentage. Ghost Line: A dotted line connects the last confirmed pivot to the current live price, allowing you to visualize the developing structure before it locks in. 2. Structure Mapping: Once pivots are confirmed, the script analyzes price action relative to those points: BoS (Break of Structure): Trend Continuation. Triggered when price breaks a confirmed pivot in the direction of the trend (e.g., breaking a Higher High in an uptrend). CHoCH (Change of Character): Trend Reversal. Triggered when price breaks a major pivot in the opposite direction (e.g., breaking a Higher Low in an uptrend). Visual Features: Minimalist Design: Uses floating text labels (no background boxes) to keep price action visible. Color Coded: Blue/Maroon for Continuation (BoS), Aqua/Orange for Reversal (CHoCH). Settings Guide: ZigZag Deviation %: Set this to 5.0 for Higher Timeframes (Daily/4H) or lower it to 0.2 - 0.5 for Intraday Scalping (1m/5m). Ghost Line: Toggle on/off to see the real-time projection. Alerts: Full alert support included for Bullish/Bearish BoS and CHoCH signals. Credits: Logic based on standard Price Action and Market Structure theory.
Chỉ báo Pine Script®
của tonngnh3
indicator("MouNoOkite_InitialMove_Screener", overlay=true)//@version=5 indicator("猛の掟・初動スクリーナー（5EMA×MACD×出来高×ローソク）", overlay=true, max_labels_count=500) // ========================= // Inputs // ========================= emaSLen = input.int(5, "EMA Short (5)") emaMLen = input.int(13, "EMA Mid (13)") emaLLen = input.int(26, "EMA Long (26)") macdFast = input.int(12, "MACD Fast") macdSlow = input.int(26, "MACD Slow") macdSignal = input.int(9, "MACD Signal") volLookback = input.int(5, "出来高平均（日数）", minval=1) volMinRatio = input.float(1.3, "出来高倍率(初動点灯)", step=0.1) volStrong = input.float(1.5, "出来高倍率(本物初動)", step=0.1) volMaxRatio = input.float(2.0, "出来高倍率(上限目安)", step=0.1) wickBodyMult = input.float(2.0, "ピンバー判定: 下ヒゲ >= (実体×倍率)", step=0.1) pivotLen = input.int(20, "直近高値/レジスタンス判定のLookback", minval=5) pullMinPct = input.float(5.0, "押し目最小(%)", step=0.1) pullMaxPct = input.float(15.0, "押し目最大(%)", step=0.1) showDebug = input.bool(true, "デバッグ表示（条件チェック）") // ========================= // EMA // ========================= emaS = ta.ema(close, emaSLen) emaM = ta.ema(close, emaMLen) emaL = ta.ema(close, emaLLen) plot(emaS, color=color.new(color.yellow, 0), title="EMA 5") plot(emaM, color=color.new(color.blue, 0), title="EMA 13") plot(emaL, color=color.new(color.orange, 0), title="EMA 26") emaUpS = emaS > emaS emaUpM = emaM > emaM emaUpL = emaL > emaL // 26EMA上に2日定着 above26_2days = close > emaL and close > emaL // 黄金隊列 goldenOrder = emaS > emaM and emaM > emaL // ========================= // MACD // ========================= = ta.macd(close, macdFast, macdSlow, macdSignal) // ヒストグラム縮小（マイナス圏で上向きの準備）も見たい場合の例 histShrinking = math.abs(macdHist) < math.abs(macdHist ) histUp = macdHist > macdHist // ゼロライン上でGC（最終シグナル） macdGCAboveZero = ta.crossover(macdLine, macdSig) and macdLine > 0 and macdSig > 0 // 参考：ゼロ直下で上昇方向（勢い準備） macdRisingNearZero = (macdLine < 0) and (macdLine > macdLine ) and (math.abs(macdLine) <= math.abs(0.5)) // ========================= // Volume // ========================= volMA = ta.sma(volume, volLookback) volRatio = volMA > 0 ? (volume / volMA) : na volumeOK = volRatio >= volMinRatio and volRatio <= volMaxRatio volumeStrongOK = volRatio >= volStrong // ========================= // Candle patterns // ========================= body = math.abs(close - open) upperWick = high - math.max(open, close) lowerWick = math.min(open, close) - low // 長い下ヒゲ（ピンバー系）: 実体が小さく、下ヒゲが優位 pinbar = (lowerWick >= wickBodyMult * body) and (lowerWick > upperWick) and (close >= open) // 陽線包み足（前日陰線を包む） bullEngulf = close > open and close < open and close >= open and open <= close // 5EMA・13EMA を貫く大陽線（勢い） bigBull = close > open and open < emaM and close > emaS and (body > ta.sma(body, 20)) // “相対的に大きい”目安 candleOK = pinbar or bullEngulf or bigBull // ========================= // 押し目 (-5%〜-15%) & レジブレ後 // ========================= recentHigh = ta.highest(high, pivotLen) pullbackPct = recentHigh > 0 ? (recentHigh - close) / recentHigh * 100.0 : na pullbackOK = pullbackPct >= pullMinPct and pullbackPct <= pullMaxPct // “レジスタンスブレイク”簡易定義：直近pivotLen高値を一度上抜いている // → その後に押し目位置にいる（現在が押し目） brokeResistance = ta.crossover(close, recentHigh ) or (close > recentHigh ) afterBreakPull = brokeResistance or brokeResistance or brokeResistance or brokeResistance or brokeResistance breakThenPullOK = afterBreakPull and pullbackOK // ========================= // 最終三点シグナル（ヒゲ × 出来高 × MACD） // ========================= final3 = pinbar and macdGCAboveZero and volumeStrongOK // ========================= // 猛の掟 8条件チェック（1つでも欠けたら「見送り」） // ========================= // 1) 5EMA↑ 13EMA↑ 26EMA↑ cond1 = emaUpS and emaUpM and emaUpL // 2) 5>13>26 黄金隊列 cond2 = goldenOrder // 3) ローソク足が26EMA上に2日定着 cond3 = above26_2days // 4) MACD(12,26,9) ゼロライン上でGC cond4 = macdGCAboveZero // 5) 出来高が直近5日平均の1.3〜2.0倍 cond5 = volumeOK // 6) ピンバー or 包み足 or 大陽線 cond6 = candleOK // 7) 押し目 -5〜15% cond7 = pullbackOK // 8) レジスタンスブレイク後の押し目 cond8 = breakThenPullOK all8 = cond1 and cond2 and cond3 and cond4 and cond5 and cond6 and cond7 and cond8 // ========================= // 判定（2択のみ） // ========================= isBuy = all8 and final3 decision = isBuy ? "買い" : "見送り" // ========================= // 表示 // ========================= plotshape(isBuy, title="BUY", style=shape.labelup, text="買い", color=color.new(color.lime, 0), textcolor=color.black, location=location.belowbar, size=size.small) plotshape((not isBuy) and all8, title="ALL8_OK_but_noFinal3", style=shape.labelup, text="8条件OK (最終3未)", color=color.new(color.yellow, 0), textcolor=color.black, location=location.belowbar, size=size.tiny) // デバッグ（8項目チェック結果） if showDebug and barstate.islast var label dbg = na label.delete(dbg) txt = "【8項目チェック】 " + "1 EMA全上向き: " + (cond1 ? "達成" : "未達") + " " + "2 黄金隊列: " + (cond2 ? "達成" : "未達") + " " + "3 26EMA上2日: " + (cond3 ? "達成" : "未達") + " " + "4 MACDゼロ上GC: " + (cond4 ? "達成" : "未達") + " " + "5 出来高1.3-2.0: "+ (cond5 ? "達成" : "未達") + " " + "6 ローソク条件: " + (cond6 ? "達成" : "未達") + " " + "7 押し目5-15%: " + (cond7 ? "達成" : "未達") + " " + "8 ブレイク後押し目: " + (cond8 ? "達成" : "未達") + " " + "最終三点(ヒゲ×出来高×MACD): " + (final3 ? "成立" : "未成立") + " " + "判定: " + decision dbg := label.new(bar_index, high, txt, style=label.style_label_left, textcolor=color.white, color=color.new(color.black, 0)) // アラート alertcondition(isBuy, title="猛の掟 BUY", message="猛の掟: 買いシグナル（8条件＋最終三点）")
Chỉ báo Pine Script®
của morishima0ut6b
Continuation Model by XausThis report summarizes the historical performance of the Institutional Daily Bias Probability Model on EURUSD daily data for the 2025 calendar year. The model combines three components: 1. Continuation bias around the previous day's high/low (PDH/PDL). 2. Reversal bias based on failed continuation, failed breakouts, and exhaustion. 3. Neutral bias to identify liquidity-building days when no directional trades should be taken. A fixed 25-pip stop loss (0.0025) is assumed for R-multiple calculations. Trades are only taken when Neutral score < 50 and either Continuation or Reversal score is at least 70, with Neutral overriding, then Reversal, then Continuation.
Chỉ báo Pine Script®
của CCRafael46
Strategia S&P 500 vs US10Y YieldThis strategy explores the macroeconomic relationship between the equity market (S&P 500) and the debt market (10-Year Treasury Yield). Historically, rapid spikes in bond yields often exert downward pressure on equity valuations, leading to corrections or bear markets. The goal of this strategy is capital preservation. It attempts to switch to cash when yields are rising too aggressively and re-enter the stock market when the bond market stabilizes.
Chiến lược Pine Script®
của adamniestoj
Cup & Handle Finder by Mashrab🚀 New Tool Alert: The "Perfect Cup" Finder Hey everyone! I’ve built a custom indicator to help us find high-quality Cup & Handle setups before they breakout. Most scripts just look for random highs and lows, but this one uses a geometric algorithm to ensure the base is actually round (avoiding those messy V-shapes). How it works: 🔵 Blue Arc: This marks a verified, institutional-quality Cup. 🟠 Orange Box: This is the "Handle Zone." If you see this connecting to the current candle, it means the setup is live and ready for a potential entry! Best Usage: Works best on Weekly (1W) charts. It’s designed to be an "Early Warning" system—alerting you while the handle is still forming so you don't miss the move. Give it a try and let me know what you find! 📉📈
Chỉ báo Pine Script®
của highstandart9
1
SCOTTGO Advanced MACD🌟 Custom MACD: Enhanced Visuals & Crossover Signals This indicator is a highly customized version of the traditional Moving Average Convergence Divergence (MACD) oscillator, designed to provide clear, immediate visual confirmation of signal line crossovers and zero-line crossings. Core Features: MACD Crossover Shadow Fill: The area between the MACD line and the Signal line is filled with a customizable shadow. This instantly visualizes whether the MACD is above (bullish crossover) or below (bearish crossover) the Signal line. Signal Crossover Markers (Arrows & Dots): Crossover Dot: A small, configurable solid dot is plotted exactly at the point where the MACD and Signal lines intersect, providing pinpoint accuracy for the crossover event. Crossover Arrows: Customizable up (green) and down (red) arrows are plotted using a small numerical offset from the crossover point, ensuring visibility without cluttering the indicator lines. Zero-Line Crossing Markers: Distinct, small markers (circles/diamonds) are used to signal when the MACD line crosses the zero line, indicating a shift in momentum relative to the baseline. Customizable MA Type: The user can select either Exponential Moving Average (EMA) or Simple Moving Average (SMA) for both the MACD oscillator calculation and the signal line calculation. This indicator is ideal for traders who rely on MACD crossovers and require precise, configurable visual feedback directly on the chart.
Chỉ báo Pine Script®
của SCOTTGO
Bar Number IndicatorBar Number Indicator This Pine Script indicator is designed to help intraday traders by automatically numbering candlesticks within a user-defined trading session. This is particularly useful for strategies that rely on specific bar counts (e.g., tracking the 1st, 18th, or 81st bar of the day). Key Features: Session-Based Counting: Automatically resets the count at the start of each new session (default 09:30 - 16:00). Timezone Flexibility: Includes a dropdown to select your specific trading timezone (e.g., America/New_York), ensuring accurate session start times regardless of your local time or the exchange's default setting. Smart Display Modes: Choose to show "All" numbers, or filter for "Odd" / "Even" numbers to keep your chart clean. Custom Positioning: Easily place the numbers Above or Below the candlesticks. Minimalist Design: Numbers are displayed as floating text without distracting background bubbles.
Chỉ báo Pine Script®
của crunchy3859
TedAlpha – Structure / FVG / OB Sessions: Only looks for trades when price is inside your defined London or NY time blocks. CHOCH: Uses pivots to track swing highs/lows, then flags a bullish CHOCH when structure flips from LL/LH to HH/HL, and vice versa for bearish. FVG: Detects 3-candle imbalance and keeps the zone “active” for fvgLookback bars, then checks if price trades back into it. Order Blocks: On a CHOCH, grabs the last opposite candle (bearish before bull CHOCH = bullish OB, bullish before bear CHOCH = bearish OB) and marks its body as the OB zone. Signal: A valid long = bull CHOCH + in session + (price inside bullish FVG and/or bullish OB, depending on toggles). Short is the mirror image. RR 1:3: SL uses the last swing low (for longs) or last swing high (for shorts), TP is auto-set at 3× that distance and plotted as lines.
Chỉ báo Pine Script®
của teddyleting