SMA Dow-Flow MTF (SAXO Logical Alert)This script is an advanced MTF (multi-timeframe) monitor that combines the concepts of Dow Theory and SMA (Single Moving Average) to capture the moment when trends align across multiple timeframes. It is particularly focused on visualizing when lower timeframes synchronize with the direction of higher timeframes, without being distracted by short-term noise. 1. Trend Determination Mechanism (Core Logic): Rather than the usual simple determination of whether a price is above or below a moving average, this is based on updates of "low lows and highs." Pivot Detection: Points where the SMA moves in a "V" or "inverted V" shape are recorded as reversal candidates ($lastH$, $lastL$). Trend Reversal Conditions: Uptrend: When the price clearly breaks above the most recent SMA high ($lastH$). Downtrend: When the price clearly breaks below the most recent SMA low ($lastL$). 2. Indicator Features ① Sync Hierarchy: This script counts the degree to which the direction of each time period matches that of the higher time period, starting from the lower time period. The 5-minute time period forms a trend. The 15-minute time period follows the same direction as the 5-minute time period. The 1-hour time period follows the same direction as the 15-minute time period... (continues up to the daily time period). This ensures that an alert is sent out when the larger trend (daily or 4-hourly) swallows up the smaller trend (5-minute or 15-minute). ② Set Selection: You can switch between the "Yen Set (AUDJPY, EURJPY, etc.)" and the "Dollar Set (EURUSD, GBPUSD, etc.)." This allows you to grasp the strength or weakness of a specific currency (e.g., a weak yen or a strong dollar) at a glance.
This script's alert function does not simply sound when the trends match, but is designed to pinpoint the moment when the number of trend synchronizations increases (i.e., when momentum increases).
Below, we will explain in detail how it works and the meaning of the notifications.
1. Alert Conditions
An alert will only be triggered when all three of the following conditions are met.
Increase in Sync Count: For example, if only two time frames, the 5-minute and 15-minute ones, were aligned (Sync: 2), and the 1-hour one also aligns in the same direction (Sync: 3), the alert will be triggered.
Above the set minimum count (alert_min): The default setting is "3." In this case, a notification will be triggered the moment three, four, or five time frames are synchronized.
Selected Set Only: If the "Yen Set" is displayed, an alert will not be triggered even if a currency pair in the Dollar Set is synchronized.
2. How to Read the Alert Message
When you receive a notification, the following message will be displayed.
USDJPY: 4-Bar Synchronization (Upward)
USDJPY: A Currency Pair Gaining Momentum
4-Bar Synchronization: Indicates that the direction of the four timeframes (5-minute, 15-minute, 1-hour, and 4-hour) is consistent, starting with the lowest timeframe.
Upward/Downward: The direction of the synchronization.
このスクリプトは、「ダウ理論」と「移動平均線（SMA）」の考え方を組み合わせ、複数の時間足でトレンドが揃った瞬間を捉えるための高度なMTF（マルチタイムフレーム）モニターです。特に、短期的なノイズに惑わされず、上位足の方向に下位足が同期したタイミングを視覚化することに特化しています。1. トレンド判断の仕組み（コアロジック）通常の「移動平均線より上か下か」という単純な判定ではなく、「押し安値・戻り高値」の更新をベースにしています。ピボットの検知: SMAが「V字」または「逆V字」に動いた地点を、反転の候補（$lastH$, $lastL$）として記録します。トレンド転換の条件:上昇トレンド: 価格が直近のSMA高値（$lastH$）を明確に上抜けたとき。下落トレンド: 価格が直近のSMA安値（$lastL$）を明確に下抜けたとき。2. インジケーターの特徴① 同期（Sync）の階層構造このスクリプトは、下位足から順に「どれだけ上位足と方向が一致しているか」をカウントします。5分足がトレンドを形成。15分足が5分足と同じ方向。1時間足が15分足と同じ方向……（日足まで続く）これにより、「大きな流れ（日足・4時間足）に、小さな流れ（5分・15分）が飲み込まれた瞬間」を逃さずアラート通知します。② セット選択機能「円セット（AUDJPY, EURJPYなど）」と「ドルセット（EURUSD, GBPUSDなど）」を切り替えて表示できます。これにより、特定の通貨の強弱（円安・ドル高など）を一目で把握できるのが強みです。
このスクリプトのアラート機能は、単に「トレンドが一致した」ときに鳴るのではなく、**「トレンドの同期数が増加した瞬間（＝勢いが増した瞬間）」**をピンポイントで通知するように設計されています。
以下に、その仕組みと通知内容の意味を詳しく解説します。
1. アラートが発生する条件
アラートは、以下の3つの条件がすべて揃った時にのみ発信されます。
同期数（Sync Count）の増加: 例えば、それまで「5分足と15分足」の2つしか揃っていなかった（Sync: 2）のが、新しく「1時間足」も同じ方向に揃った（Sync: 3）という変化の瞬間に鳴ります。
設定した最小数以上 (alert_min): 初期設定では「3」になっています。この場合、3つ、4つ、または5つの時間足が同期した瞬間に通知が飛びます。
選択中のセットのみ: 「円セット」を表示している時は、ドルセットの通貨ペアが同期してもアラートは鳴りません。
2. アラートメッセージの読み方
通知が来ると、以下のようなメッセージが表示されます。
USDJPY: 4足同期 (上昇)
USDJPY: 勢いが出た通貨ペア
4足同期: 下位足から順に「5分・15分・1時間・4時間」の4つの時間足で方向が一致したことを示します。
上昇 / 下落: その同期している方向です。
Multitimeframe
StO Price Action - Fair Value Gap [Demo]Short Summary
- Multi-timeframe Fair Value Gap (FVG) visualizer
- Supports up to 7 independently configurable timeframes
- Displays bullish and bearish imbalance zones as price boxes
- Optional Consequent Encroachment (CE) midline per FVG
- Designed for Imbalance and reaction analysis
Demo Restrictions
- Timeframe dropdown selections are limited
- Line style dropdown selections are limited
- Multi-timeframe functionality is removed or restricted
- Alerts are disabled or completely removed
- No code logic runs behind disabled GUI elements
Full Description
Overview
- Identifies and visualizes Fair Value Gaps based on price imbalance
- Highlights areas where price moved inefficiently
- Focuses on structural gaps rather than candle-by-candle signals
- Intended for contextual, level-based price action analysis
Fair Value Gap Logic
- Bullish FVG:
- Gap formed by aggressive upward price movement
- Visualized using the defined high-color zone
- Bearish FVG:
- Gap formed by aggressive downward price movement
- Visualized using the defined low-color zone
- Gaps represent areas where price may rebalance or react
Timeframe Configuration
- Up to 7 timeframes configurable independently
- Each timeframe supports:
- Enable / disable visualization
- Timeframe selection:
- Chart-based
- Minimum timeframe filters (≥H1, ≥H4)
- Explicit intraday to higher timeframes
- Independent bullish and bearish zone colors
- Maximum graphic object limit per timeframe
Consequent Encroachment (CE)
- Optional CE line per Fair Value Gap
- CE represents the midpoint of the imbalance zone
- Can be enabled or disabled per timeframe
- Customizable CE color
- Used as a potential equilibrium or reaction reference
Usage
- Useful for identifying imbalance-based price
- Helps anticipate areas of price reaction or mitigation
- Suitable for breakout, retracement and continuation analysis
- Works best when aligned with higher-timeframe structure and bias
Notes
- Visualization-only indicator
- No trade execution or strategy logic
- Effectiveness depends on timeframe selection and market conditions
- Recommended to combine with structure, liquidity or trend context
Daily Levels & MAs on intraday timeframeDaily Levels & MAs - Professional Key Level Tracker
📊 OVERVIEW
A comprehensive indicator that displays critical daily moving averages and key price levels all in one clean view. Perfect for traders who need to see support/resistance zones and trend indicators without cluttering their charts.
🎯 WHAT IT SHOWS
Seven essential reference levels:
- 50 SMA (Daily Simple Moving Average) - Yellow
- 21 EMA (Daily Exponential Moving Average) - Red
- 9 EMA (Daily Exponential Moving Average) - White
- Prior Day High (PDH) - Green
- Prior Day Low (PDL) - Purple/Magenta
- Premarket High (PM High) - Purple
- Premarket Low (PM Low) - Orange
✨ KEY FEATURES
✓ All lines extend to the right with clear price labels
✓ Daily moving averages calculated from daily timeframe data
✓ Prior Day High/Low tracks ONLY regular trading hours (9:30 AM - 4:00 PM)
✓ Premarket levels capture 4:00 AM - 9:30 AM price action
✓ Dotted line style keeps chart clean and readable
✓ Semi-transparent labels don't obstruct price action
✓ Works on ALL intraday timeframes
✓ Auto-updates throughout the day
🔧 TECHNICAL SPECIFICATIONS
- Lines start from beginning of current trading session
- Labels positioned 10 bars to the right of current price
- Max lines: 500 (efficient performance)
- No repainting - uses confirmed historical data
- Premarket lines remain visible during regular hours
📈 IDEAL FOR
- Day traders tracking intraday support/resistance
- Swing traders monitoring key daily trend levels
- Gap traders who need premarket reference points
- Breakout traders watching PDH/PDL violations
- Trend followers using EMA crossovers
💡 HOW TO USE
**Moving Averages:**
- 50 SMA: Long-term trend direction
- 21 EMA: Medium-term momentum
- 9 EMA: Short-term trend and quick reversals
**Price Levels:**
- PDH/PDL: Yesterday's trading range boundaries
- PM High/Low: Today's premarket extremes
- Watch for breaks above/below these levels for potential momentum
🎨 COLOR CODING
- Yellow: 50 SMA (major trend)
- Red: 21 EMA (medium trend)
- White: 9 EMA (fast trend)
- Green: Prior Day High
- Purple/Magenta: Prior Day Low
- Purple: Premarket High
- Orange: Premarket Low
⚙️ SMART FEATURES
- Prior Day calculations exclude premarket/afterhours noise
- Premarket levels reset daily at 4:00 AM
- All levels visible simultaneously without overlap confusion
- Labels show exact price values for precision entries/exits
- Lines automatically adjust length as trading day progresses
📊 TRADING STRATEGIES
**Breakout Trading:**
- Long above PDH with volume confirmation
- Short below PDL with momentum
**Mean Reversion:**
- Fade extremes back to moving averages
- Look for price rejections at PM High/Low
**Trend Following:**
- Buy pullbacks to 9 EMA in uptrends (price above 21/50)
- Sell rallies to 9 EMA in downtrends (price below 21/50)
**Gap Trading:**
- Compare open to PDH/PDL
- Use PM levels to gauge early sentiment
🔒 NO CONFIGURATION NEEDED
Simply add to your chart and start trading! The indicator automatically:
1. Calculates daily moving averages from higher timeframe
2. Tracks prior day regular hours high/low
3. Monitors current premarket session extremes
4. Displays everything with clear labels and prices
Perfect for professional traders who want institutional-grade levels without the complexity!
Today's Price Position On Intraday-From Low /High OVERVIEW
A clean, professional indicator that displays your stock's current position relative to today's high, today's low, and yesterday's close - all in one convenient table.
🎯 WHAT IT SHOWS
Three key metrics in real-time:
- From Low: How far price has moved from today's lowest point
- From High: How far price is from today's highest point
- % Today: Today's percentage change vs yesterday's 4 PM close
✨ KEY FEATURES
✓ Real-time percentage tracking throughout the trading day
✓ Works on ALL intraday timeframes (1min, 5min, 15min, etc.)
✓ Includes Pre-Market (4:00-9:30 AM) and Regular Trading Hours (9:30-4:00 PM)
✓ Color-coded indicators: Green (up), Red (down), Yellow (at reference point)
✓ Clean, non-intrusive table display in bottom-right corner
✓ Accurate reference to previous day's actual closing price
🔧 TESTING MODE
Built-in testing mode allows you to:
- Manually input test values for High, Low, Close, and Previous Close
- Verify calculations and behavior before live trading
📈 IDEAL FOR
- Day traders monitoring intraday price action
- Swing traders tracking daily momentum
- Anyone wanting quick visual reference of price position
- Traders who need to know "where we are" at a glance
💡 HOW TO USE
Simply add to your chart - no configuration needed! The indicator automatically:
1. Tracks today's high and low (including pre-market)
2. References yesterday's 4 PM closing price
3. Calculates your current position as percentages
4. Updates in real-time with color-coded signals
🎨 COLOR LEGEND
- Green: Price is up/above reference
- Red: Price is down/below reference
- Yellow: Price is exactly at reference point (unchanged)
- Orange: Previous day's close reference price
⚙️ TECHNICAL NOTES
- Automatically resets at start of each trading day
- Handles both pre-market and regular hours seamlessly
- Uses confirmed previous day close (no repainting)
- Lightweight and efficient - won't slow down your charts
Perfect for traders who want professional-grade information without chart clutter!
Force of Multi Strategy Bot: Backtest Webhook Alert Adaptive MTFForce of Multi Strategy (FoMS) - Innovative solution designed for crypto trading 📈
Overview:
An intraday algorithmic trading bot with 29 strategies, up to 10 symbols, and multi-timeframe filters sends pre-configured Webhook Alerts in TTA format to major crypto exchanges and features a live strategy Switcher that selects the best-performing strategy based on real-time backtest data
Key Features:
29 non-repaint strategies on up to 10 symbols
Buy/Sell signals based on TV Technical Rating, as well as classic and adaptive indicators
Higher Timeframe filters (ADX, Volatility, Volume, ATR) with multipliers from chart TF
Advanced risk management and backtest metrics
Automated "Switcher” to pick the best-performing strategies from backtest data in real time
Webhook alerts in TTA format (tradingview to anywhere) pre-configured to major Crypto Exchanges: Binance, Bitget, BingX, Bybit, GateIO, KuCoin and OKX
Main Inputs:
"All Strategies" on/off - trading all strategies on chart symbol or one strategy for 10 symbols
HTF Mult 1/2 - multipliers for 2 higher timeframes filters
InitCap/Trade$/Leverage - position size of one trade and initial capital
Min ROI/WR/PF/SRP/MAR/Trades - minimal cutoff for key strategy performance metrics. When "All Strategies" is "on", the switcher will open trades for strategies which meet these criteria
"Check Last" on/off - check performance metrics for a specified number of recent trades.
If the option is disabled, metrics are checked for the entire duration of the backtest
BacktestDays/MaxBars - set how long the script will perform backtests in days, with a limitation on the number of bars for acceptable calculation speed
How it works:
Only one trade can be opened at a time for each symbol. Strategies or symbols are calculated using their own initial capital settings
FoMS operates in two modes: ‘All Strategies’ on and off. When ‘All Strategies’ is off, it focuses on a single, user-selected strategy for each symbol. If ‘All Strategies’ is on, it's continuously evaluates 29 strategies and uses the Switcher to select the most promising ones
“All Strategies” Off Mode:
When the ‘All Strategies’ option is disabled, the script executes trades and sends alerts based on a single, user-selected strategy for each symbol. The script records backtest results for the selected strategy, allowing you to analyze its performance
In attached example you see how FoMS works on 10 symbols (first ones in alphabetical order with a leverage of 50) with chosen strategy #2 and enabled ATR HTF filter. Summary Profit & Loss for Backtest strategy #2: +$162.20 across 119 trades, with a $10 per-trade margin
This mode ideal when you calibrate risk management options on different symbols, or if you find that one of 29 strategies is profitable on many symbols and want trade with many of them simultaneously. This opens up the possibility of mass diversification, for example, launching trading on 200 symbols with just 20 notifications
“All Strategies” On Mode:
When the ‘All Strategies’ enabled, FoMS continuously evaluates 29 strategies for chart symbol and records backtest results continuously from each of them enabling the switcher to work
In this example, you can see how FoMS operates with all 29 strategies on a single chart symbol, with a summary P&L of +554.7$ from the backtest across 403 trades. Over the last 20 days from the backtest starting point, each strategy executed a different number of trades, from 2 to 41, getting different P&L from -26.1$ to +74.2$. Based on the results obtained, it seems prudent to continue trading only with strategies that have been more successful in the backtest
This is where he comes into play: strategy switcher executes trades and send alerts only from strategies that meet your pre-defined performance criteria, based on backtest results of all strategies. This opens up opportunities, allowing you to not only test the performance of one or many strategies, but also test the logic behind switching them
In attached example switcher use next logic: trades opened only for strategies who reached in test minimal setting ROI >= 0.2, PF >= 1.75 and SRP >= 1. As a result of testing this given logic: profit/loss = $84 , return on investment = 0.33, number of trades in 20 days = 34 .
P&L per trade rises from 1,37$ (all strategies backtest trades) to 2.47$ (switcher work)
Another backtest of logic example, switcher does the same thing but after check 6 last trades for each strategy. This rise ROI from 0.33 to 0.43, P&L rises from 84$ to 98.7$, P&L per trade rises from 2.47$ (check 20 days test) to 3.3$ (check last 6 trades)
Also, switcher has abilities to check strategies and update decisions about their performance with setting time period , for example every 2 days, and additionally it’s can choose for trading only Top ROI Rated Strategies, at say for example it can open trades from only Top 3 of them all
Interface:
Labels: on chart show open long/short and result in USD for closed trades, when "All strategies" is active - labels at bottom of indicator window show which exactly number of strategy opens a deal. The "No" label means that none of the strategies that meet the performance criteria have opened a trade at this time
Lines: indicator window contained equity line (aqua) and HTF Technical rating area, chart contain SL/TP (red/green) and open price (blue) lines for opened trades
Table 1 (all strategies or all symbols):
- TR: count of closed trading deals; WR: Winning Rate; PF: Profit Factor
- MDD: Max Draw Down for all calculated time from initial capital
- R$: trading Profit & Losses Result in USD
First row shows some of script settings, in published example: initial capital 100$, leverage 50L, 20 backtest days, 10$ is invest in one deal, 15m is chart timeframe, 60m is higher timeframe 1 and 120m is higher timeframe 2.
The exchange name in the second row determines the alert messages format
If strategy meet cutoff criteria you will see "Ok" label, if strategy meet criteria and have maximum from other reached ROI they labeled "Best". Chart strategy labeled "Chart", Chart and Ok labels in one time is "Chart+", "Chart" and "Best" is labeled "Best+"
Green or red color of strategy number/symbol means a long or short trade is currently active
Table 2 (chart symbol):
- PT: Result in USD Per one Trade; PW: Result Per Win, PL: Result Per Loss
- ROI: Return On Investment; SR: Sharpe Ratio, MR: CalMAR ratio
- Tx: Commission Fee in $; R$: trading Profit & Losses Result in USD
There separate trade results of backtesting for longs and shorts. In first column you see how many USD were invested in one trade, taking into account possible position splitting
Update frequency: closed trades information updated every bar, but check "ok"/"best" labels in table 1 would be when chart have not open trade. Its need for calculation speed purpose
Risk management options:
When a buy or sell trade is opened, you'll see three lines on the chart: a red stop-loss line ( SL ), a green take-profit line ( TP ), and a blue line representing the entry price . The trade will be closed if the high price or low price reaches the line TP or SL (no wait for bar close) and alert will be triggered once per bar when script recalculates
Several options are available to control the behaviour of SL/TP lines, such as stop-loss by percent, ATR, Highest High (HH) and Lowest Low (LL) . Take Profit can be in percent, ATR, Risk Reward ratio . There some Trailing Stop with start trail trigger options - ATR, % or HH/LL
Available Kelly position sizing option with multiplier to reduce growth
Additionally, implemented a function for adding a position when the breakeven level expressed in the current ROI is reached for opened trade (splitting). The position is added within the bar
Webhook alerts in TTA format with message contained next info : Buy / Sell or adding Quantity, Leverage, SL price, TP price and close trade Result in USD
(for easy forward tests and check difference between actual trade result and alerts logs)
Backtest Engine:
Profit or Loss is USD = close trade price * open trade quantity - open trade price * open trade quantity - open trade quantity * (open trade price + close trade price)/2 * commission
Possible slippage or alert sending delay needed to be include in commission % which you will set in risk management settings block, default settings is 0.15% (0,06% for open, 0,06% for close and 0,03% for possible slippage or additional fees)
Maximum Draw Down Drawdown = (peak - current equity) / peak * 100 ;
Drawdown > maxDrawdown ? maxDrawdown = Drawdown
ROI = profit result in USD / sum of all positions margin
CalMAR Ratio = ROI / (-MaxDrawDown)
Sharpe Ratio = ROI / standard deviation for (Sum of all results) / (Sum of all Position Margins)
Strategies:
Before describing them, I’ll provide extensive statistics on the results of using the listed strategies:
Number 1, 2 and 3: based on Higher Timeframe TradingView Technical Ratings at self. 1 is summary total rating, 2 is oscillators and 3 is moving averages. When TR filter cross user setting filter levels trade will be open at chart bar close. By Default on chart you see Summary Technical Rating oscillator, but here the options for change it to Oscillator TR or Moving Average TR
Number 4, 5 and 6: based on Chart TimeFrame TR. Trades will open when its values (Summary, Oscillators and Moving Averages) reached setting buy/sell level. To seeing plot of Chart TF Technical Ratings you can just set HTF multipliers to 1
Number 7, 8 and 9: is Alternative buy sell logic for Chart TimeFrame TR, trades will open when counting rising or falling setting values will be reached
Number from 10 to 18: based on user-selected adaptive Moving Averages and Oscillators indicators. In settings you will see different types of Adaptive Algorithms, Moving Averages (By default: SMA, RMA, WMA, Hann, JMA) and Oscillators (By default: RSI, LRSI, MomentumRSI, RVI) - more than 30 options in total. The standard adaptive algorithm is unique, developed by the author and based on ADX: it shortens the length of the MA/OSC when the market is defined as trending, and increases it when the market is defined as sideways. Other available adaptive length algorithms options based on identification of Volatility, Market Cycles or Trending and works on a similar principle adjusting the length setting of MA/OSC within market condition. All adaptive strategies have their options for calibrating. You can plot on chart any MA/OSC and its length obtained from adaptive algorithms. Trades are opened when the MA/OSC are crossed user-specified in settings buy/sell levels
Number from 19 to 29: They are calibrated between two options "Fast React" or "Strong Signal" for avoid overfitting. "Fast React" mean trades would be more, indicators will detect buy/sell condition faster. "Strong Signal" buy/sell will identifies slower and open potentially more accurate trades. I tried to found mostly time worked classic strategies within thousands tests, at the time of publication this script uses :
- Swing HH LL ( 19 ): trades open when trend swing is determined by comparing the timing of the latest high vs. low within time window sensitive to Fast or Strong setting;
- Composite indicator ( 20 ): implemented Fast or Strong variations based on normalized and weighted 0.25 * SMA + 0.15 * RSI + 0.25 * MaCD + 0.35 * ROC, buy/sell signals trigger when overbought/oversell (ob/os) levels is crossed;
-%R ( 21,22 ): buy/sell signals occur when fast or strong long term Williams %R and short %R cross centre line or ob/os levels;
- Pivot Point SuperTrend ( 23 ): identifies pivot point centreline with ATR bands, buy/sell signal triggered when fast or strong trend direction is changed;
- Ichimoku ( 24 ): buy/sell when tenkan cross kijun with strong or fast cloud trend confirmation;
- TSI ( 25 ): trades open when fast/strong variations of true strength index crossing ob/os levels;
- Band Level RSI ( 26 ): identifies bands based on fast/strong close price wma and stdev, buy/sell signals triggered when RSI cross ob/os levels with price out of bands;
- RSI/MacD ( 27, 28 ): trades open when macd crossing signal line if RSI was in ob/os condition long time ago or short time ago in a fast or strong variations, and open trades when macd line (fast) or signal line (strong) crossed zero line;
- Bars UpDown( 29 ): trades open when last bars ups or downs in fast or strong variations
- Overbought/oversold levels are sensitive to the “Fast React” or “Strong Signal” settings
Why this mashup: No one single trading strategy works consistently in all conditions. I combine 29 unique strategies to dynamically identify the best-performing ones at any given time
You can enable or disable various Higher Timeframes Filters (ADX, Volume, Volatility, Tech rating). If enabled, trades will only open when the filter setting are reached for one of two HTF
And after this describe i will show you another great statistics:
In showed tables you see backtest results for all strategies on 100 random crypto coins. Uses default script settings: InitCap 20$, One trade 3$, L50, commission 0.15%, 15m chart TF and two HTF 60m and 120m, ATR 2.5 SL and ATR trailing with trigger at 7 ATRs by open price
What in this stats: First test was without any HTF filtering, second table show result for same strategies and coins, but with enabled ADX Filter. As you can see Filter reduce Losses radically
Without filtration just 24 crypto coins averages from 100 was profitable, with ADX filtration this number rises to 32 from 100 , note that after filter best performed become another strategies. Bear in mind, all filters or risk management options will affect their backtest performance
For clarity: classic indicators are not plotted on chart in this script to avoid overloading the interface. You can easily understand what exactly do listed upper strategies by the “Long” and “Short” labels on the chart and the trades counted in the tables. While you can collect the massive statistics by yourself as shown upper, it is not part of this script
Originality and Value:
Diverse: fully customizable rules for the first 18 strategies, as well as a choice of "fast" or "strong" signals for the remaining 11, allow you to build a suite with different trading frequency
Risk Control and Backtest: dynamic SL/TP and position sizing with immediate test performance of many assets/strategies in one framework help optimize the risk-reward profile
Automated Strategy Switching: author developed unique feature allows to pick on the best-performing strategies in real-time and can backtest the logic behind switching them.
It designed to finding profitable habits in market behaviours and to cut out unprofitable ones
This combination, along with the developer’s extensive research and testing, sets the “Force of Multi Strategy” apart from many other trading solutions available on the market
Another usage example:
Tips that I found through tests: Last 4 trades say more about the next one #5 than 10 do about #11. You can use many instances of FoMS on one symbol. An attached example demonstrates how 4 instances of FoMS work with different filter settings (No Filters, ADX, ATR, TV.TR)
All instances have the same settings : Symbol: PEPE, Chart TF 15m, HTF Mult 4/8, InitCap $100, One trade $10/50 Leverage. Strategies switch based on the same logic : choosing a strategy that achieved an ROI ≥ 0.4 and a win rate ≥ 50% over the last 4 trades. As you can see: the TV.TR filter opened 24 trades with best P&L 118.9$. The ATR filter (no trade if ATR 5 / ATR 20 < 1.2) performed best 1.37 ROI, achieving a P&L 95.9$ with 9 trades in 20 days of backtest
Now you can choose the preferred option and create a new alert with the Webhook address provided by TTA. That’s all. The next signal from the strategy that meets the set ROI and WR criteria from the last 4 trades with the HTF filter will be executed by the script and sent to the Webhook address to open a position on the exchange
Keep in mind , script open a market orders and alerts have slight delay, some negative or positive difference (usually 3-10%, L50) in close trade result between alert and actual trade results is possible, alert message example: Close 1000PEPEUSDT C=LINEAR +2.27$ Buy 1000PEPEUSDT Q=13276.2944 SL=0.006545 TP=0.010168 L=50 D=2 C=LINEAR St:21
Might be important , this script generates alerts for market orders that are then executed on pre-configured crypto exchanges via the TTA service, along with native SL/TP orders
Finally:
There is no universal instruction or ‘how to’ for profitability in all markets at any time. However, I will continue researching and will share more tips in the future. I believe that FoMS’s capabilities can revolutionize your understanding of intraday trading
Invite-only status safeguards the author’s unique multi-strategy framework, unavailable in public scripts, ensuring users access tailored tools without imitation risks.
To get access please see the Author's instructions!
Wishing you successful trades! Stay tuned for updates
DISCLAIMER: No sharing, copying, reselling, modifying, or any other forms of use are authorized for this script, and the information published with them. This script is strictly for individual use. No one knows the future and Investments are always made at your own risk. I am not responsible for any losses you may incur. Before investment make sure that your logic is profitable on demo account
[yorsh.trades] CCT ICC [FOREX] v1.1Title: CCT ICC - Dual-Mode Trap & Trend Engine
Description:
The CCT ICC (Candle Continuation Theory) is not just a signal indicator; it is a comprehensive trading workspace designed for the serious Forex trader. Built on Pine Script v6, this tool bridges the gap between discretionary analysis and mechanical system verification.
Whether you are looking for real-time trade alerts or a rigorous environment to backtest and validate a strategy, the CCT ICC provides the infrastructure to trade with algorithmic precision.
☯️ The Duality: Two Modes, One Engine
This script operates in two distinct modes, selectable via the settings. This duality is the core strength of the tool, allowing you to move from hypothesis to execution seamlessly.
1. Simulator Mode (Backtest & Model Building)
Purpose: This mode is designed for the rigorous strategist. It transforms your chart into a mechanical testing engine.
How it works: It executes one trade at a time based on strict rules (Daily Risk Limits, Max Wins/Losses per day). It tracks real-time PnL and generates a detailed Historical Performance Table directly on your chart.
Why use it: We encourage users to start here. Use this mode to validate the "Trap Model" expectancy. Does the strategy hold up over the last 100 trades? What is the Drawdown? The Simulator provides the raw data you need to build confidence in your model before risking real capital. It enforces mechanical exits (e.g., Force Exit at 5 PM NY or on Trend Flips) to remove emotional bias from the test.
2. Signal Generator (Live Trading)
Purpose: Once you have validated the model, switch to this mode for live market scanning.
How it works: It acts as a discretionary scanner. It ignores the strict "one trade at a time" rule and daily risk limits, instead alerting you to every valid setup as it happens.
Visuals: It draws static Entry/SL/TP boxes for visual reference, allowing you to pick and choose trades based on your own confluence factors.
⚙️ The Technology: Multi-Timeframe Engines
The script utilizes a dual-engine logic to filter noise and identify high-probability structure:
Engine 1 (Execution): Analyzes the immediate structure on your trading timeframe (e.g., 1H) to find entries.
Engine 2 (Informational/Filter): Monitors the Higher Timeframe (e.g., 4H or Daily) to determine the dominant trend.
Auto-Sync: The script automatically selects the correct institutional timeframes based on your chart (e.g., if you trade M15, it aligns with D1 structure automatically).
⚡ The Strategy: Trap & Structure
The CCT ICC identifies liquidity points where price is likely to continue the trend:
Main Traps: Identifies "Trap Candles" that are breached and then reclaimed, signaling a false reversal (we trade WITH the trend).
Virgin Wicks (VW): Highlights unmitigated wicks that act as POIs for price.
Turtle Soups (TS): specific liquidity sweeps at range edges following the Main trend only.
Range Theory: Dynamically plots Range Highs and Lows to define your Draw on Liquidity (DOL).
🛡️ Risk Management & Position Sizing
Stop guessing your lot size. The script includes a built-in Position Sizer:
Auto-Calculation: Based on your defining risk (e.g., $100 per trade), it calculates the exact lot size required based on the Stop Loss distance.
Auto-FX Detection: Automatically adjusts for Standard Lots (100k) or JPY pairs.
Visual Boxes: Displays the exact Risk:Reward ratio and Quantity directly on the chart.
Note : the position sizer has been tested only on CFD/FOREX
⚠️Methodology & Educational Disclaimer
This script is provided for educational and analytical purposes only.
The logic, models, and visualizations implemented in this script are based on the author’s own understanding, interpretation, and implementation of trading concepts commonly referred to as CCT / ICC market structure theory. These concepts are widely available to the public for free across various educational platforms and sources.
This script does not claim ownership over the underlying theory, nor does it represent any official or authoritative version of CCT / ICC methodologies. It is an independent implementation and should be viewed solely as a learning and analysis tool.
This script is not affiliated with, endorsed by, or connected to any individual, educator, or organization associated with CCT, ICC, or related methodologies.
Risk Disclaimer
Trading financial markets involves significant risk and may not be suitable for all traders. Any signals, levels, projections, or trade examples shown by this script are hypothetical and for demonstration purposes only and do not guarantee future performance.
Nothing in this script constitutes financial advice, investment recommendations, or a solicitation to buy or sell any financial instrument. Users are solely responsible for their trading decisions and risk management.
TradingView is not responsible for any losses or damages resulting from the use of this script.
Author's Note:
The goal of the CCT ICC is to stop you from "predicting" and start you "reacting." Use the Simulator. Study the wins and the losses. Build your model, and then use the Generator to execute it.
Trade safe.
Weekly IR Breakout SignalsInspired by XO (@Trader_XO) on CT for his trading strategy
and special thanks to REBO (@@R3BOOO) for putting it together in a cheat sheet and sharing it
contact me on X: @neuromancer0x
-------------------------------------------
Timeframe Recommendations:
1H chart - Day trading (5-10 signals/month)
4H chart - Swing trading (2-5 signals/month) ⭐ Best
Daily chart - Position trading (1-2 signals/month)
-------------------------------------------
When Signals Appear:
Monday: No signals (just setting up IR)
Tuesday-Friday: Watch for breakouts
Max 1 LONG + 1 SHORT per week (indicator enforces this)
-------------------------------------------
Risk Management:
Risk 0.5-1% per trade
Never risk more than 2% in one day
If 2 losses in a row → reduce size or pause
-------------------------------------------
🔔 Setting Up Alerts
Click "Create Alert" (⏰ icon)
Condition: Select "🟢 LONG Entry" or "🔴 SHORT Entry"
Alert name: "Weekly IR Signal"
Set to: "Once Per Bar Close"
Send to: Phone/Email/App
Sri - Pivot (Daily /Weekly / Monthly / 6M)📌 Sri – Pivot (Daily / Weekly / Monthly / 6M)
Sri – Pivot+ is a multi-timeframe pivot and CPR framework designed to visualize short-term trading zones and higher-timeframe market structure simultaneously on a single chart.
The script combines fixed higher-timeframe pivots (Weekly, Monthly, 6-Month) with an independently configurable CPR engine (CPR2) that supports multiple pivot methodologies and developing levels.
This indicator is built to help traders contextualize intraday price action within higher-timeframe support, resistance, and equilibrium zones, rather than treating pivots as isolated levels.
🔹 Core Concepts Used
This script is not a single pivot calculator, but a layered pivot architecture built around:
Higher-Timeframe Structural Levels
Central Pivot Range (CPR) compression & expansion logic
Dynamic time-adaptive pivot resolution
Developing (in-progress) CPR projection
🔹 What Makes This Script Different
1️⃣ Fixed Higher-Timeframe Structural Pivots (Auto-Anchored)
The script automatically plots only the current active levels for:
Weekly pivots
Monthly pivots
6-Month (Half-Yearly) pivots
Each timeframe uses:
Full Pivot + BC + TC (CPR)
S1–S5 / R1–R5
Distinct color systems and line styles to visually separate structural importance
These levels are anchored to the exact period open/close timestamps, avoiding repainting and misalignment issues commonly seen in simpler pivot scripts.
Purpose: Identify institutional reference zones where reactions are statistically more meaningful.
2️⃣ CPR2 – Independent Advanced CPR Engine
CPR2 is a separate pivot engine running alongside structural pivots, allowing traders to overlay short-term tradable zones without interfering with higher-timeframe context.
CPR2 supports:
Traditional
Fibonacci
Classic
Camarilla pivots
Selectable CPR resolutions:
Auto
Daily
Weekly
Monthly
Quarterly
Half-Yearly
Yearly
The Auto mode adapts to the chart timeframe, switching resolution intelligently (e.g., intraday → Daily / Weekly).
3️⃣ Developing CPR (Forward Projection)
Unlike static pivots, this script calculates and projects:
Developing CPR
Developing R1 / S1
These levels update during the active session using evolving OHLC data and can be:
Extended forward (holiday-aware)
Visualized as filled CPR zones
Purpose: Anticipate future equilibrium zones before the session closes.
4️⃣ Historical vs Current Pivot Control
Users can independently choose:
Only current session levels
Or historical pivot levels (lookback-controlled)
This prevents chart clutter while still allowing contextual back-analysis.
🔹 Practical Trading Use Cases
Trend Days
Price holding above CPR and respecting higher-timeframe R/S levels.
Range Days
CPR compression with price oscillating between S1–R1.
Reversal Zones
Confluence between:
Weekly / Monthly pivots
Developing CPR boundaries
Camarilla or Fibonacci extensions
🔹 Design & Performance Considerations
Uses time-anchored security calls to avoid repainting
Optimized drawing logic to respect TradingView limits
Clear visual hierarchy (Weekly → Monthly → 6M → CPR2)
Suitable for index, equity, and futures markets
⚠️ Important Notes
This is not a buy/sell signal indicator
Designed for context, planning, and confluence
Best used alongside price action, volume, or trend tools
📊 Recommended Chart Usage
Intraday charts: 5m / 15m / 30m
Swing charts: 1H / 4H / Daily
Works on all liquid instruments
[yorsh.trade] BJN iFVG Model v1.1Description:
The BJN iFVG Model is not just an indicator; it is a complete algorithmic trading framework designed to identify, qualify, and rank Inversion Fair Value Gap (iFVG) setups using PROPIETARY RULES developed by the author.
Unlike standard FVG indicators that simply highlight gaps on a chart, this script employs a complex Ranking Engine that scores every potential setup from C to A++. It automates the "mental checklist" professional traders use—analyzing Time (Macros), Market Structure (Sweeps), Correlation (SMT), and Higher Timeframe Delivery—to determine the probability of a trade setup.
🚀 Why This Indicator is Different
This script adds value by focusing on context and validity rather than just detection.
Algorithmic Ranking System: It doesn't just show you an entry; it grades it. A setup is awarded an "A+" or "A++" only if specific confluences align (e.g., HTF Delivery + Liquidity Sweep + SMT Divergence).
Structural Validation: It utilizes a proprietary logic involving "Invalidation Points" (IP) and "Floor/Ceiling" detection. An iFVG is only considered valid if the price structure supporting it remains intact.
Cross-Ticker SMT Engine: The script includes a built-in module to compare price action against a correlated asset (e.g., NQ vs. ES) to detect SMT Divergences at the exact moment of trade formation.
Integrated Position Sizer: It automatically calculates the invalidation level based on market structure (mitigation blocks) and projects the optimal Entry, Stop Loss, and Take Profit levels, including contract sizing based on your risk parameters.
🛠 Key Features & Modules
1. The Execution Engine (iFVG Logic)
The core of the strategy looks for Inversion FVGs (failed FVGs that price punches through).
Ghost Mode: The script monitors live candles. If price penetrates a specific % into an opposing FVG, it triggers a "Preview" state, allowing you to prepare before the candle closes.
Hazards & Mitigations: It scans the chart for "Hazard" FVGs (opposing arrays that might stop price) and "Mitigation" arrays (supporting structure) to determine a safe Stop Loss placement.
2. The Ranking System (Confluences)
Every setup produces a "Rank Tag" (e.g., A+ (del, sweep, smt)). The components are:
Delivery (D): Checks if the setup is reacting off a Higher Timeframe (HTF) PD Array (from the MTF Matrix).
Sweep (S): Checks if the leg creating the setup swept liquidity (Fractals or Session Highs/Lows).
SMT: Checks for divergence between the current asset and a comparison ticker (Default: ES/NQ pairing).
Macro: Checks if the setup is occurring within specific time-based Algo Macros.
3. Contextual Matrix (Dashboard)
A "Smart Table" is displayed on the chart, providing a real-time summary of:
Liquidity Pools: Nearest Buy-side and Sell-side liquidity based on 1H fractals and Daily Highs/Lows.
Active Status: Shows the current state of the market (Idle, Armed, Triggered, or Confirmed).
Macro Status: Highlights when a Macro time window is active.
4. MTF Delivery Engine
The script runs background simulations on higher timeframes (e.g., 1H, 4H) to find unmitigated FVGs. These are projected onto your lower timeframe chart to serve as "Delivery" targets or support.
⚙️ Usage Guide
Bias & Setup: The script automatically detects Long and Short scenarios.
The Trigger: When a candle closes, validating an iFVG, a setup box appears.
Green/Red Badge: Shows the Rank (e.g., A+).
Sizer Box: Shows the visual Stop Loss (Red), Entry (Edge), and Take Profit (Teal).
Info Label: Displays the risk in points and the calculated contract size.
Invalidation: If price hits the "IP" (Invalidation Point) or the "Floor/Ceiling" before the target, the setup is marked as INVALIDATED and removed to keep the chart clean.
🎨 Visuals & Customization
Alerts: Fully configurable alerts for "Triggered" (Live) and "Confirmed" (Close) states, filterable by Minimum Rank (e.g., only alert on 'A' setups or better).
Styling: Toggle individual modules (Killzones, SMT lines, MTF Plotter) on/off to suit your visual preference.
Sessions: Customizable Killzones (Asia, London, NY AM/PM) with optional high/low projections.
⚠️ Disclaimer & Risk Warning
Not Financial Advice: This indicator is a technical analysis tool designed to assist in identifying market structure and potential areas of interest. It does not guarantee profits.
The methodology implemented in this script is inspired by and derived from widely available trading concepts, including principles commonly associated with Inner Circle Trader (ICT)–style market structure, liquidity, and inefficiency theory.
These concepts are publicly available for free across multiple educational sources and are not proprietary to this script.
The BJN iFVG Model represents the author’s independent interpretation, rule-set, automation logic, and execution framework built on top of those general ideas.
Repainting Note: The "Ghost Mode" (Preview) functionality evaluates live price action. A "Triggered" status on a live candle may disappear if the candle closes without confirming the inversion. Always wait for candle closes for confirmed signals.
Risk Management: The built-in position sizer is a calculation aid only. Always verify contract sizes and risk against your broker's requirements before executing trades.
Risk & Platform Disclaimer
This script is provided for educational and analytical purposes only and does not constitute financial advice.
All signals, trade examples, position sizing, and performance metrics are hypothetical and for demonstration purposes only. Past or simulated performance does not guarantee future results.
Trading financial instruments involves substantial risk and may not be suitable for all traders. You are solely responsible for your trading decisions and risk management.
TradingView bears no responsibility for any losses, damages, or outcomes resulting from the use of this script.
Pine Script v6 | Powered by
3-Session ORB (SGT) + 15m EMA200 Trend Dashboard (v6)3-Session ORB (SGT) + 15m EMA200 Trend Dashboard (v6)
VJS Area of InterestThe Area of Interest indicator is designed to highlight the key zones on the chart where price is most likely to react. These areas are not random — they represent levels where buyers and sellers have previously shown strong interest, making them high-probability zones to pay attention to.
Instead of chasing price or entering in the middle of nowhere, this indicator helps you wait for price to come to you. When price reaches an Area of Interest, that’s where we slow down, observe price behavior, and look for confirmations such as structure shifts, rejections, or volume reactions before considering an entry.
It’s important to understand that an Area of Interest is not an automatic buy or sell signal. Think of it as a decision zone. This keeps you patient and disciplined, reducing emotional trades and improving risk-to-reward by entering closer to invalidation levels.
Moving forward, our focus will be on executing trades only around these Areas of Interest. When combined with proper risk management and confirmation, this approach allows us to trade with structure, clarity, and consistency — instead of guessing market direction.
Emoji Price + TP + SL FollowerEmojis following price, TP, and SL. For the homies only. We ain't playin dat foo foo broke boy no mo. put the fries in the bag
ORB Algo | WolfOfFuturesThis Script is an updated version of the Flux Charts ORB Algo
15min ORB default
4EMA breakout Condition
Dynamic TP Default
Ticker DataTicker Data is a high-efficiency dashboard designed for traders and analysts who need immediate context on a ticker without cluttering their chart.
This script aggregates fundamental data, price performance, and key institutional support levels into a single, customizable table. It allows you to assess the "character" of a stock in seconds by overlaying essential metrics directly onto your chart.
Key Features
1. Institutional Anchors (Auto-VWAPs)
Instead of manually drawing Anchored VWAPs for every ticker, this script automatically calculates and displays the three most important levels for trend management:
VWAP IPO: The volume-weighted average price since the stock's inception.
VWAP YTD: The volume-weighted average price starting from Jan 1st of the current year.
VWAP Earnings: The volume-weighted average price since the most recent earnings report.
Visual Logic: Text turns Green if price is above the VWAP, and Red if below.
2. Trend & Momentum
5-Day MA: Displays the 5-day Simple Moving Average based on Daily data. This serves as a "momentum guardrail"—if the price is above the 5DMA, short-term momentum is bullish.
Timeframe Independence: The 5DMA and performance stats are forced to the Daily timeframe, ensuring consistent data even if you view the chart on 15m or 1H intervals.
3. Fundamental Context
Market Cap: Current market capitalization.
Float & Float %: Displays the number of floating shares and the percentage of total shares they represent. Vital for gauging volatility potential (low float = higher volatility).
4. Price Performance & Range
Performance: % change over the last Week (1W), Month (1M), and Quarter (3M).
52-Week High/Low:
Off 52W High: The % drawdown from the 52-week high.
Above 52W Low: The % extension from the 52-week low.
5. Event & History Awareness
Earnings Countdown: Displays the number of days until the next earnings report. Text turns Red inside the "Danger Zone" (less than 7 days).
IPO Timer: Calculates exactly how many years have passed since the stock's public listing, allowing you to quickly filter for fresh merchandise vs. mature assets.
Settings & Customization
This script is built for "Chart Real Estate" management. You have full control over the visual layout via the inputs tab:
Display Toggles: Every metric (Float %, Dist from High/Low, IPO Timer, VWAPs, etc.) has its own checkbox. Uncheck what you don't need to keep the table compact.
Table Positioning:
Location: Pin the table to any corner (Top/Bottom, Left/Right).
Size: Scale the table from Tiny to Large to fit your resolution.
Push Down: A unique feature that adds empty transparent rows to the top of the table. This pushes the data down so it does not obscure the most recent price candles or the ticker header.
Visual Styling:
Alignment: Independently control the text alignment (Left, Center, Right) for both the Labels and the Data columns.
Colors: Fully customizable Background and Text colors.
Note: The default text color is Black (optimized for Light Mode charts). If you use Dark Mode, simply switch the "Text Color" input to White.
Technical Notes
Data Source: Moving averages and VWAP anchors are calculated using Daily ('D') data to ensure institutional relevance.
Fast EMA Stack >XBT<Multi-timeframe EMA indicator displaying 9/20 EMA bands across 5M, 15M, 1H, and 4H timeframes simultaneously on a single chart.
Quickly assess trend alignment across multiple timeframes without switching charts. A built-in signal table provides instant visual confirmation of bullish or bearish conditions on each timeframe.
Features:
Multi-Timeframe Bands — View EMA 9/20 bands for 5M, 15M, 1H, and 4H all at once
Crossover Labels — Bull/Bear labels appear directly on the chart at each EMA crossover point
Stack Filter — Only show crossover signals that align with your higher timeframe bias (e.g. if 1H is bullish, only show bull signals on lower timeframes)
Individual Label Controls — Toggle crossover labels on/off independently for each timeframe
Label Limit — Set maximum labels per timeframe to keep charts clean (default 5)
Signal Table — Dark-mode table showing BULL/BEAR status with colour-coded indicators
Fully Customisable — Adjust EMA lengths, line thickness, colours, and band transparency per timeframe
Toggle Timeframes — Show or hide individual timeframe bands
Alert Conditions — Pre-built alerts for bullish and bearish EMA crossovers on all four timeframes
How to Use:
Look for alignment across timeframes to confirm trend direction. When multiple timeframes show the same signal (all green or all red), you have stronger confluence. Crossover labels mark exact entry/exit points where momentum shifts.
Stack Filter:
Enable the Stack Filter to only see signals that match your higher timeframe bias. Select your bias timeframe (15M, 1H, or 4H), then:
When bias is bullish → only bull crossovers appear on lower timeframes
When bias is bearish → only bear crossovers appear on lower timeframes
The bias timeframe always shows both directions so you can see when trend changes
This helps filter out counter-trend noise and keeps you trading with the flow.
Green = Bullish (EMA 9 above EMA 20)
Red = Bearish (EMA 9 below EMA 20)
RSI: Evolved [DAFE]RSI: Evolved : The Ultimate Momentum Intelligence Engine
30+ RSI Engines. 15+ Zero-Lag Smoothers. The Revolutionary Quantum Horizon. This is Not Just an RSI. This is the Evolution of Momentum.
█ PHILOSOPHY: BEYOND THE OSCILLATOR, INTO THE NEXUS
The standard Relative Strength Index is a relic. It is a brilliant, timeless concept trapped in a rigid, one-dimensional formula developed in the 1970s. It assumes all market momentum is uniform, that all volatility is equal, and that a single mathematical lens is sufficient to view the infinitely complex character of modern markets. It is not.
RSI: Evolved was not created to be another RSI. It was engineered to be the definitive evolution of momentum analysis. This is not an indicator; it is a powerful, interactive research environment. It is a laboratory where you, the trader, can move beyond the static "one-size-fits-all" approach and forge a momentum oscillator that is perfectly adapted to the unique physics of your market, timeframe, and trading style.
This suite deconstructs the very DNA of the RSI, rebuilding it with a library of over 30 distinct, mathematically diverse calculation engines . From timeless classics and exotic variations to proprietary DAFE quantum models, this suite provides an unparalleled arsenal for quantifying the unseen forces of market momentum.
█ THE EVOLUTION: WHAT MAKES THIS UNLIKE ANY OTHER RSI?
This is not just a collection of features; it is a seamlessly integrated, multi-layered analytical system. It stands in a class of its own for several key reasons:
The 30+ Algorithm Core: At its heart is a library of over 30 unique RSI calculation engines. You can now choose an engine based on its mathematical properties—whether you need the zero-lag responsiveness of a Hull RSI, the time-warping capability of a Laguerre RSI, or the predictive power of a DAFE Quantum Fusion RSI.
Advanced Post-Processing: After the RSI is calculated, it passes through a multi-stage refinement process. First, choose from over 15+ professional-grade smoothing algorithms to create a crystal-clear signal. Then, activate the intelligent Filter Module to scale the RSI's output based on trend, volatility, or momentum regimes.
The Quantum Horizon & Temporal Wave: This is a revolutionary leap in data visualization. The indicator projects the historical momentum waves from higher timeframes directly onto your main price chart as a futuristic, holographic overlay. You can now see the alignment (or divergence) of macro momentum without ever looking away from price action. This is multi-timeframe analysis evolved into an art form.
Dynamic, Volatility-Adaptive Zones: Static 70/30 levels are obsolete. Evolved's "Quantum Zones" are alive; they "breathe" with market volatility. They automatically widen during powerful trends to keep you in a winning trade and tighten during choppy consolidation to help you catch reversals with greater precision.
Comprehensive Analytical Modules: This is a full suite of institutional-grade tools, including a powerful regular and hidden Divergence Engine , a multi-timeframe Consensus Dashboard , and dynamic RSI Bands (Bollinger, Keltner, etc.) plotted directly on the oscillator.
█ THE QUANTUM HORIZON & TEMPORAL WAVE: SEEING MOMENTUM IN 4D
This groundbreaking feature fundamentally changes how you interact with multi-timeframe momentum data. The Quantum Horizon is a dedicated visualization module that projects up to three "Temporal Waves" directly onto your main price chart. Each wave is a historical representation of a momentum oscillator (RSI, MFI, or Stoch RSI) pulled from a higher timeframe of your choice. Instead of flipping between charts or cluttering your screen with multiple indicators, you get an immediate, intuitive, and aesthetically stunning view of the market's complete momentum structure.
Each Temporal Wave is a self-contained universe, rendered as a glowing, flowing line within its own gridded channel. This channel is not just for show; it represents the 0-100 scale of the oscillator, with key 30, 50, and 70 levels marked for reference. You can see the history of momentum, its peaks, its troughs, and its crossovers with its own signal line. This allows you to visually identify macro divergences, trend alignment, and exhaustion points on your primary trading chart, transforming your analysis from a fragmented process into a single, unified experience. This is no longer just an indicator; it is a true Heads-Up Display for the flow of time and momentum.
█ THE ARSENAL: A DEEP DIVE INTO THE RSI & SMOOTHING ENGINES
This is your library of mathematical DNA. Understanding your tools is the first step to mastery. The 30+ RSI types are grouped into distinct families, each with a unique philosophy.
THE RSI ENGINE FAMILIES
The Classics (Wilder's, Cutler's, EMA, WMA): These are the foundational building blocks of momentum analysis. They provide a reliable, time-tested baseline. Wilder's uses the RMA for a unique smoothing characteristic, while Cutler's uses the SMA for a more direct, arithmetic average of gains and losses. The EMA and WMA versions offer increased responsiveness by weighting recent price action more heavily.
The Low-Lag Warriors (DEMA, TEMA, Hull, ZLEMA): This family is engineered specifically to combat the inherent lag of classical averages. The Double and Triple EMA (DEMA, TEMA) use a composite of multiple EMAs to reduce latency. The Zero-Lag EMA (ZLEMA) attempts to remove lag by adjusting the source price with its own past data. The Hull RSI is a standout, using a weighted moving average calculation to achieve a remarkable balance of extreme smoothness and near-zero lag, making it ideal for scalping.
The Exotics (Laguerre, Connors, Fisher, KAMA): These engines employ advanced mathematical concepts to view momentum through a different lens. The Laguerre RSI , based on John Ehlers' work, uses a time-warping, non-linear filter that can be extremely responsive to changes in trend. The Fisher Transform RSI normalizes the output to a Gaussian distribution, making peaks and troughs sharper and more defined for clearer signals. The KAMA Adaptive RSI is a "smart" algorithm that automatically slows its calculation in choppy markets and speeds it up in strong trends.
The Volume-Based (Volume-Weighted, MFI, VWAP-Weighted): This family infuses price momentum with volume data, providing a measure of conviction. They answer not just "how fast is price moving?" but "how much participation is behind the move?". The Money Flow RSI (MFI) is a classic, while the Volume-Weighted and VWAP-Weighted versions directly incorporate volume into the gain/loss calculation, giving more weight to high-volume bars.
The DAFE Proprietary Engines (The "God Mode" Algos): The crown jewels of the Laboratory, these are custom-built, proprietary algorithms you will not find anywhere else.
DAFE Quantum Fusion: This engine calculates RSI on three harmonic timeframes simultaneously (based on the Golden Ratio) and "superimposes" them using a dynamic weighting system based on volume and momentum confidence. It is the most robust and balanced all-rounder.
DAFE Kinetic Energy: Based on the physics principle that Momentum = Mass × Velocity. Standard RSI only sees Velocity (price change). Kinetic RSI weights every price move by Relative Volume (Mass), measuring the true "force" of the market.
DAFE Spectral: This engine uses concepts from Digital Signal Processing to analyze the frequency of price moves. It automatically differentiates between the "Signal" (the underlying trend) and the "Noise" (the chop), and adapts its calculation speed accordingly.
DAFE Entropy Flow: A unique engine that uses Information Theory to measure market "disorder." In chaotic, high-entropy markets, it automatically dampens its own signal to avoid whipsaws. In orderly, low-entropy trends, it sharpens its signal to be more responsive.
THE POST-SMOOTHING FILTERS
After your primary RSI is calculated, you can pass it through one of over 15 advanced filters for unparalleled clarity.
Low-Lag (Hull, DEMA, TEMA): Ideal for responsive smoothing that tracks the raw RSI closely.
Adaptive (KAMA, VIDYA): Perfect for smart, regime-aware smoothing that is slow in chop and fast in trends.
DSP & Scientific (SuperSmoother, Butterworth, Gaussian, Jurik-Style): The pinnacle of signal processing. These filters provide the absolute cleanest signal with minimal lag, leveraging advanced digital signal processing techniques to surgically remove noise.
█ THE ANALYTICAL MODULES: BEYOND THE LINE
Dynamic Zones: Your overbought/oversold levels (e.g., 70/30) are no longer static lines. They are living, breathing zones that respond to market volatility. They automatically widen during powerful, high-volatility trends to prevent you from selling a strong uptrend too early. Conversely, they tighten during low-volatility consolidation, allowing you to catch smaller, mean-reverting moves with greater precision. This is a crucial evolution for trading in modern, dynamic markets.
Divergence Engine: The automated engine works tirelessly in the background to detect critical disconnects between price and momentum. It automatically identifies and plots both Regular Divergences (which often signal major trend reversals) and Hidden Divergences (which often signal trend continuations after a pullback) with clear on-chart and in-pane markers and lines.
MTF Dashboard: Context is everything. This module provides an instant read on the momentum across three higher timeframes of your choice. The "Consensus" reading tells you if all timeframes are aligned ("ALL BULL" or "ALL BEAR"), providing powerful contextual confirmation for your trades and helping you avoid taking signals that go against the macro flow.
RSI Bands: This module applies a full-fledged band methodology (Bollinger Bands, Keltner Channels, etc.) directly to the RSI line itself. A pierce of the upper or lower band is a powerful sign of a statistical extreme, often preceding a sharp reversion back to the mean. A "squeeze" in the RSI bands often precedes an explosive move in momentum.
Signal Line & Histogram: The fast-moving RSI line is paired with a slower, smoother Signal Line of your choice. Crossovers between these two lines can be used as effective entry/exit triggers that are often more reliable than simple overbought/oversold levels. The histogram visually represents the momentum (the velocity and acceleration) of the RSI itself, turning from light to dark green in a strengthening uptrend, for example.
█ DEVELOPMENT PHILOSOPHY
RSI: Evolved was forged from a single, guiding principle: momentum is not a fixed property; it is a dynamic, multi-faceted force with a unique character in every market. This tool was designed for the trader who is no longer satisfied with a one-size-fits-all indicator. It is for the analyst, the tinkerer, the scientist—the individual who seeks to deconstruct, understand, and master the hidden physics of market momentum. This is a tool for forging your own alpha, not just following a lagging line.
RSI: Evolved is designed to give you that patience and discipline, providing a crystal-clear, multi-dimensional view of momentum so you can act with precision when the perfect setup finally arrives.
█ DISCLAIMER AND BEST PRACTICES
THIS IS AN ADVANCED ANALYTICAL TOOL: This indicator provides intelligence on momentum, not financial advice. It should be used as a core component of a complete trading strategy.
RISK MANAGEMENT IS PARAMOUNT: All trading involves substantial risk. Never risk more capital than you are prepared to lose.
START WITH A ROBUST BASE: The "DAFE Quantum Fusion" engine with the "SuperSmoother" is an exceptionally powerful and well-balanced starting point for most markets.
USE CONFLUENCE: The highest probability signals occur when multiple modules agree. For example: a Regular Bullish Divergence, as the RSI crosses up from an Extreme Oversold Dynamic Zone, while the Quantum Horizon shows the higher timeframes are also starting to turn up.
"The hard part is not making the decision to buy or sell, but having the patience and discipline to wait for the right setup."
— Mark Weinstein
Taking you to school. - Dskyz, Trade with Anticipation. Trade with Strength. Trade with RSI: Evolved
Smart Money Structure FilterEnglish Description
Overview
Smart Money Structure Analyzer is a professional trading tool that implements Smart Money Concepts (SMC) to identify key market structure shifts, Break of Structure (BOS), and Change of Character (CHoCH) patterns. This indicator helps traders follow the "smart money" flow by detecting institutional order flow patterns on any timeframe.
Key Features
Swing Point Detection - Identifies significant highs and lows using fractal-based logic
Market Structure Analysis - Classifies market conditions as Uptrend, Downtrend, or Consolidation
Break of Structure (BOS) - Detects when price breaks key structural levels
Change of Character (CHoCH) - Identifies potential trend reversals
Mitigation Levels - Shows potential retracement targets after structure breaks
How It Works
The indicator analyzes price action through several layers:
Swing Detection Algorithm
Uses a configurable swing period (3-21 bars)
Identifies valid swing highs and lows that are confirmed by surrounding price action
Stores the last 20 swings for structure analysis
Structure Determination
Uptrend: Higher Highs (HH) + Higher Lows (HL)
Downtrend: Lower Lows (LL) + Lower Highs (LH)
Consolidation: Mixed structure or ranging market
Break of Structure (BOS) Logic
Bearish BOS: Price closes below the last confirmed Higher Low (HL)
Bullish BOS: Price closes above the last confirmed Lower High (LH)
Change of Character (CHoCH) Logic
Bearish CHoCH: After a bearish BOS, price forms a Lower Low (confirms trend reversal)
Bullish CHoCH: After a bullish BOS, price forms a Higher High (confirms trend reversal)
Mitigation Levels
Calculates potential retracement levels after BOS (typically ±0.2% from broken structure)
Visual Elements
Fractals: Swing points (optional display)
Structure Lines: Last Higher Low (blue) and Last Lower High (purple)
BOS Signals: Triangles marking structure breaks
CHoCH Signals: Circles confirming trend changes
Mitigation Levels: Dotted orange lines for potential retracements
Info Label: Real-time structure status and key levels
Alerts
The indicator provides alerts for:
Break of Structure (BOS) events
Change of Character (CHoCH) confirmations
Settings
Swing Period: Sensitivity of swing detection (default: 3)
Show Fractals: Toggle swing point markers
Show Structure Lines: Display key structure levels
Show Break of Structure: Display BOS signals
Show Change of Character: Display CHoCH signals
Show Mitigation Levels: Display retracement levels
Best Practices
Use on higher timeframes (1H+) for more reliable signals
Combine with volume analysis for confirmation
Wait for CHoCH confirmation before entering trades
Use mitigation levels as potential entry zones
Русское описание
Обзор
Smart Money Structure Analyzer - профессиональный торговый инструмент, реализующий концепции Smart Money (SMC) для определения ключевых сдвигов рыночной структуры, Break of Structure (BOS) и Change of Character (CHoCH). Индикатор помогает отслеживать поток "умных денег", выявляя паттерны институционального ордерного потока на любом таймфрейме.
Ключевые возможности
Определение свингов - Выявляет значимые максимумы и минимумы с помощью фрактальной логики
Анализ структуры рынка - Классифицирует состояние рынка: Восходящий тренд, Нисходящий тренд или Консолидация
Break of Structure (BOS) - Обнаружение пробития ключевых уровней структуры
Change of Character (CHoCH) - Определение потенциальных разворотов тренда
Уровни митигации - Показывает потенциальные цели отката после пробоя структуры
Принцип работы
Индикатор анализирует ценовое действие через несколько уровней:
Алгоритм определения свингов
Использует настраиваемый период свинга (3-21 свечи)
Определяет валидные максимумы и минимумы, подтвержденные окружающим движением цены
Сохраняет последние 20 свингов для анализа структуры
Определение структуры
Восходящий тренд: Higher Highs (HH) + Higher Lows (HL)
Нисходящий тренд: Lower Lows (LL) + Lower Highs (LH)
Консолидация: Смешанная структура или флет
Логика Break of Structure (BOS)
Медвежий BOS: Цена закрывается ниже последнего Higher Low (HL)
Бычий BOS: Цена закрывается выше последнего Lower High (LH)
Логика Change of Character (CHoCH)
Медвежий CHoCH: После медвежьего BOS формируется Lower Low (подтверждает разворот)
Бычий CHoCH: После бычьего BOS формируется Higher High (подтверждает разворот)
Уровни митигации
Расчет потенциальных уровней отката после BOS (обычно ±0.2% от сломанной структуры)
Визуальные элементы
Фракталы: Точки свингов (опционально)
Линии структуры: Последний Higher Low (синий) и последний Lower High (фиолетовый)
Сигналы BOS: Треугольники, отмечающие пробой структуры
Сигналы CHoCH: Круги, подтверждающие изменение тренда
Уровни митигации: Пунктирные оранжевые линии для потенциальных откатов
Инфо-метка: Статус структуры и ключевые уровни в реальном времени
Оповещения
Индикатор предоставляет алерты для:
Событий Break of Structure (BOS)
Подтверждений Change of Character (CHoCH)
Настройки
Период свинга: Чувствительность определения свингов (по умолчанию: 3)
Показывать фракталы: Включение/выключение маркеров свингов
Показывать линии структуры: Отображение ключевых уровней структуры
Показывать Break of Structure: Отображение сигналов BOS
Показывать Change of Character: Отображение сигналов CHoCH
Показывать уровни митигации: Отображение уровней отката
Рекомендации по использованию
Используйте на старших таймфреймах (1H+) для более надежных сигналов
Комбинируйте с анализом объема для подтверждения
Ждите подтверждения CHoCH перед входом в сделку
Используйте уровни митигации как потенциальные зоны входа
Технические особенности
Максимальное количество меток: 500
Работает на любых таймфреймах
Не перерисовывает прошлые сигналы
Эффективно использует ресурсы благодаря ограничению хранения свингов
Индикатор предназначен для трейдеров, работающих с Price Action и концепциями Smart Money, и помогает систематизировать анализ рыночной структуры в соответствии с подходами институциональных трейдеров.
Opens and Levels MapperOpens & Levels Mapper — Institutional Overview
Opens & Levels Mapper provides a precise and unobtrusive framework of institutional reference levels used across global markets.
The tool focuses exclusively on time-based levels that matter for intraday structure, volatility timing, and session-to-session behavior.
Reference Levels Included
• Previous Ranges
PDH / PDL
PWH / PWL
PMH / PML
Anchored on the exact bar where each level forms to maintain structural integrity for sweeps, retests, liquidity grabs, and range rotations.
• Mid-Range (Optional)
50% of PD / PW / PM
Equilibrium markers offering internal range context without noise.
• Session Opens (DST-Proof)
London Midnight
London Open
New York Midnight
New York Cash Open
Hong Kong Open
Tokyo Open
All timestamps use real session timezones and auto-adjust with DST, ensuring accurate reference points monitored by professional desks.
Technical Characteristics
True timezone handling (DST-adjusted)
Anchoring directly on event-defining bars
Multiple line modes (Start→Now, Start→Right, Full Extend)
Optional price labels for core levels
Minimalist and clean visual footprint
No synthetic signals or artificial zones — only actionable reference levels
Use-Case Profile
Intraday bias development
Session overlap transitions
Reaction analysis around opens and previous ranges
Liquidity behavior at institutional reference points
Cross-session continuity (Asia → London → New York)
Works seamlessly alongside order flow, liquidity concepts, VWAP, FVGs, and market structure tools.
Disclaimer
This script does not generate trading signals or provide financial advice.
It is a contextual analysis tool.
Trading involves risk, and users remain solely responsible for their decisions.
• Built with Pine Script® v6
2026 Model2026 Model
OVERVIEW
This Pine Script indicator is a comprehensive trading tool designed for identifying key market structure patterns, session-based trading opportunities, and higher timeframe context. It combines multiple trading concepts including Fair Value Gaps (FVGs), Turtle Soup patterns, Smart Money Technique (SMT) divergence, and session-based analysis.
CORE FEATURES
1. SESSION/KILLZONE DETECTION
What It Does:
- Identifies and highlights major trading sessions based on New York time (EDT/EST)
- Displays session labels that change color: light green for the current session, grey for past sessions
- Shows background shading for active sessions
Sessions Tracked:
- Asia Session: 8:00 PM - 12:00 AM NY time
- London AM: 2:00 AM - 5:00 AM NY time
- NY AM: 9:30 AM - 11:00 AM NY time
- NY PM: 1:30 PM - 4:00 PM NY time
How It Works:
- Uses timezone conversion to check if current time falls within each session range
- Creates labels at the start of each session
- Updates label colors every bar to highlight the active session
- Labels are positioned at a consistent Y-level (aligned with HTF boundary lines)
Killzone Status:
- Active during 1:00 AM - 12:59 PM NY time
- Displayed in the dashboard table
2. DAILY BIAS CALCULATION
What It Does:
- Determines market bias based on the relationship between the last two completed daily candles
- Only calculates on weekdays (Monday-Friday) for traditional markets
- Works 24/7 for crypto markets
Bias Logic:
- Bullish:
* Previous day's high exceeded the day before's high AND close was above previous day's high
* OR previous day's low was below the day before's low BUT close recovered above the day before's low
- Bearish:
* Previous day's low was below the day before's low AND close was below previous day's low
* OR previous day's high exceeded the day before's high BUT close fell below the day before's high
How It Works:
- Compares wicks and closes of the last two completed daily candles
- Persists the last weekday bias on weekends
- Displayed in the dashboard table
3. FAIR VALUE GAPS (FVGs)
What It Does:
- Identifies price gaps where liquidity was skipped
- Draws boxes on the chart showing potential retracement zones
- Uses adaptive thresholds that adjust to market volatility
FVG Types:
- Bullish FVG: Gap between candle 1's low and candle 2's high (price jumped up)
- Bearish FVG: Gap between candle 1's high and candle 2's low (price jumped down)
Threshold Modes:
1. ATR-based (Default): Automatically adapts to asset volatility
- Calculates threshold as: (ATR / Close Price) × 100 × Multiplier
- More sensitive for volatile assets, less sensitive for stable ones
2. Auto: Uses cumulative average of price changes
3. Manual: Fixed percentage threshold (e.g., 0.01%)
How It Works:
- Only detects FVGs on confirmed (closed) bars
- Requires the middle candle's percentage change to exceed the threshold
- Extends FVG boxes 15 bars forward
- Limits to 50 FVG boxes to prevent memory issues
Settings:
- Threshold multiplier (default: 1.0) - lower = more FVGs detected
- Minimum threshold override - ensures minimum quality
- ATR length for volatility calculation
4. HIGHER TIMEFRAME (HTF) CANDLE OVERLAY
What It Does:
- Displays the last 3-5 completed HTF candles on the right side of the chart
- Shows HTF context without cluttering the main chart
- Supports 1H, 4H, Daily, Weekly, and Monthly timeframes
Features:
- Candle Display: Shows completed HTF candles with proper wicks and bodies
- Boundary Lines: Optional vertical lines on the main chart marking HTF candle boundaries
- Labels: Optional time/day/month labels under each candle
- SMT Integration: Draws SMT lines connecting swing points on the overlay candles
- Turtle Soup Integration: Shows TS levels as horizontal lines on overlay candles
How It Works:
- Fetches HTF data using request.security() with lookahead_off to get only confirmed candles
- Positions candles to the right of the current chart using future bar indices
- Calculates boundary high/low from all visible candles for consistent line heights
- Only displays when chart timeframe ≤ HTF timeframe
Settings:
- HTF timeframe selection (1H, 4H, 1D, 1W, 1M)
- Number of candles to display (3, 4, or 5)
- Toggle boundary lines and labels
5. TURTLE SOUP PATTERN DETECTION
What It Does:
- Identifies false breakouts followed by reversals
- Draws horizontal lines at the price level that was broken and then reversed
- Works on multiple timeframes (15min, 1H, 4H)
Pattern Definition:
- Bullish Turtle Soup:
* Candle breaks below previous candle's low (wick goes lower)
* BUT closes above the previous candle's low
* Indicates a false breakdown, potential reversal up
- Bearish Turtle Soup:
* Candle breaks above previous candle's high (wick goes higher)
* BUT closes below the previous candle's high
* Indicates a false breakout, potential reversal down
Threshold System:
- ATR-based (Default): Adapts to volatility
- Converts ATR to PIPs: (ATR × Multiplier) / Pip Size
- Only triggers if the initial candle meets minimum size requirement
- Fixed PIPs: Uses a fixed minimum candle size in PIPs
How It Works:
- Checks patterns when HTF candles complete
- Finds the exact swing high/low time within the HTF candle (on lower timeframes)
- Finds when price broke through that level in the reversal candle
- Draws horizontal line from swing point to break point
- Tracks patterns for HTF overlay display
Settings:
- Timeframe selection (15min, 1H, 4H)
- Threshold mode (Fixed PIPs or ATR-based)
- ATR multiplier (default: 0.4)
- Minimum PIPs (for fixed mode)
6. SMART MONEY TECHNIQUE (SMT) / DIVERGENCE
What It Does:
- Detects divergence between correlated trading pairs
- Draws lines connecting swing points when one pair shows Turtle Soup but the other doesn't
- Only works on 4H timeframe and lower
SMT Logic:
- Bullish SMT:
* Correlated pair has bullish Turtle Soup (reversed upward)
* Current pair does NOT have bullish Turtle Soup
* Current pair stayed within previous candle's range (true divergence)
* Draws line connecting swing lows
- Bearish SMT:
* Correlated pair has bearish Turtle Soup (reversed downward)
* Current pair does NOT have bearish Turtle Soup
* Current pair stayed within previous candle's range (true divergence)
* Draws line connecting swing highs
Correlated Pairs:
- ES ↔ NQ (futures)
- SPX ↔ YM (indices)
- BTC ↔ ETH (crypto)
- GBPUSD ↔ EURUSD (forex)
- XAU ↔ XAG (metals)
How It Works:
- Fetches 4H Turtle Soup status for both current and correlated pair
- Checks if current pair showed true divergence (stayed in range)
- On lower timeframes, finds actual swing points within 4H candles
- Draws line connecting the two swing points
- Only triggers on new 4H bar close to avoid duplicates
- Displays on both main chart and HTF overlay
Settings:
- Toggle SMT display on/off
7. DASHBOARD TABLE
What It Does:
- Displays key market information in a table at the bottom-right corner
- Updates in real-time as market conditions change
Information Shown:
1. Killzone: Y/N - Whether currently in active trading hours (1 AM - 12:59 PM NY)
2. Daily Bias: Bullish/Bearish/N/A - Market direction from daily candle analysis
3. 4H Turtle Soup: Bullish/Bearish/No - Most recent 4H TS pattern (within last 5 candles)
4. 4H SMT: Bullish/Bearish/No - Most recent 4H SMT divergence (within last 5 candles)
How It Works:
- Checks arrays of TS and SMT occurrences
- Finds the most recent pattern within the last 5 completed 4H candles
- Updates only on the last bar to optimize performance
HOW IT ALL WORKS TOGETHER
Workflow Example:
1. Session Context: The indicator identifies you're in NY AM session (9:30-11 AM), highlights it in green
2. Daily Bias: Shows "Bullish" from yesterday's price action
3. HTF Overlay: Displays last 5 completed 4H candles on the right, showing higher timeframe structure
4. Turtle Soup: Detects a bearish TS on 4H - price broke above previous high but closed below it
5. SMT: If correlated pair (e.g., NQ) had bullish TS but current pair (ES) didn't, draws SMT line
6. FVGs: Identifies gaps in price that may get filled
7. Dashboard: Summarizes all this information in one place
Key Design Principles:
1. Adaptive Thresholds: Both FVG and Turtle Soup use ATR-based thresholds that adjust to volatility
2. Multi-Timeframe: Works across different chart timeframes while maintaining HTF context
3. Visual Clarity: Current session highlighted in green, past sessions in grey
4. Memory Management: Limits arrays to prevent performance issues
5. Confirmed Data Only: Uses lookahead_off to ensure only completed candles are analyzed
Best Practices for Use:
1. Timeframe Selection: Use lower timeframes (5m, 15m) for entries, but always check HTF overlay for context
2. Session Awareness: Trade during active killzones when liquidity is highest
3. Daily Bias: Align trades with daily bias for higher probability
4. Turtle Soup: Look for TS patterns at key support/resistance levels
5. SMT Divergence: Use SMT to identify when one pair is leading/diverging from correlated pair
6. FVG Fills: Watch for price to return and fill FVG gaps
TECHNICAL DETAILS
Performance Optimizations:
- Limits arrays to 50 elements (FVGs, TS, SMT)
- Only updates dashboard on last bar
- Clears and redraws HTF overlay each bar to prevent duplicates
- Uses efficient time-based lookups for swing point detection
Timezone Handling:
- All sessions use New York time (America/New_York)
- Handles EDT/EST automatically
- Daily bias uses exchange timezone for daily candles
Symbol Support:
- Works with forex, futures, stocks, crypto
- Automatically detects JPY pairs for correct pip calculation (0.01 vs 0.0001)
- Handles 24/7 markets (crypto) vs traditional market hours
SETTINGS SUMMARY
Display Settings:
- Show FVGs
- Show HTF Candle Overlay
- Show Session Times
- Turtle Soup Threshold Mode (Fixed PIPs / ATR-based)
- Turtle Soup ATR Multiplier
- ATR Length
FVG Settings:
- FVG Threshold Mode (Auto / Manual / ATR-based)
- FVG Threshold Multiplier
- FVG Manual Threshold (%)
- Minimum Threshold Override (%)
- FVG ATR Length
HTF Candle Overlay:
- HTF Overlay Timeframe (1H, 4H, 1D, 1W, 1M)
- Number of Candles (3, 4, 5)
- Show HTF Candle Boundaries
- Show HTF Candle Labels
HTF Turtle Soup Settings:
- Show HTF Turtle Soup
- Turtle Soup Timeframe (15, 60, 240)
- Lookback Candles
SMT Settings:
- Show SMT
This indicator is designed to provide a comprehensive view of market structure, combining multiple trading concepts into a unified tool for better trading decisions.
IPC Strategy........ Ignition Pullback ContinuationIPC Strategy — Ignition Pullback Continuation
The IPC (Ignition Pullback Continuation) Strategy is an intraday trend-continuation framework designed to capture institutional momentum after a true market “ignition” move.
The script identifies when price establishes a strong directional trend using EMA structure, VWAP positioning, volume confirmation, and chop filtering. Once a valid trend is confirmed, the indicator does not signal late entries. Instead, it waits for the first controlled pullback or EMA reclaim rejection, then marks the precise continuation candle where probability favors trend resumption.
This creates a two-step process:
Detect institutional trend ignition
Execute on the first high-quality pullback continuation
Key features:
Non-repainting buy/sell arrows on confirmed trend shifts
Precise pullback and rejection entry dots for execution
Chop filter to avoid low-probability market conditions
VWAP and volume confirmation for institutional context
Background and trend labeling for visual clarity
Alerts aligned with confirmed signals
The IPC Strategy is built for traders who want to avoid chasing moves and instead participate where institutions typically re-enter the market: the first pullback after momentum ignition.
Ideal for intraday trading on equities, ETFs, and liquid tickers across all timeframes.
SNRGood afternoon, friends! I want to share a trend indicator with you. It is designed for trading against the SmartMoney strategy. Now, let's go in order. 1 This is an information table. You can remove it by unchecking the boxes. Point "A" is the RSI indicator, which can be adjusted based on the timeframe. The circles represent overbought and oversold conditions. Point "B" is the ADX trend indicator, which can also be adjusted. It shows the strength of the trend. The red circle is a weak trend or slowing down. The green circle is strong and growing. The "C" point shows people's desire and fear of missing out on an opportunity. Fear is punishable. You can customize the period of candles for which the circles will be displayed. The indicator provides information but does not suggest whether to buy or sell. It works with additional knowledge and strategy. I use it on a 4-hour and 15-minute timeframe. I don't see the need to go lower. 2 These are the colored circles themselves. These show people's desire to sell or buy at a given time.
