BTC - StableFlow: Pit-Stop & Refuel EngineBTC – StableFlow: Pit-Stop & Refuel Engine | RM
Strategic Context: The Institutional Gas Station In the high-speed race of the crypto markets, Stablecoins (USDT, USDC, DAI) represent the Fuel, and Bitcoin is the Race Car. Most traders only look at the car's speed (Price), but they ignore the gas tank. The StableFlow Engine is a telemetry dashboard designed to monitor the "Fuel Pressure" within the ecosystem, identifying exactly when the car is being refueled and when it is running on empty.
The Telemetry Logic: How to Read the Race
The indicator operates on a Relative Velocity model. We aren't just looking at how many Stablecoins exist; we are measuring the Acceleration of Stablecoin Market Cap relative to the Acceleration of BTC Price.
1. The Fuel Reservoir (The Histogram)
• Cyan Zones (Refuel): The gas station is open. Institutional "Dry Powder" is flowing into stables faster than it is being spent on BTC. The tank is filling up.
• Orange Zones (Exhaust): The "Overdrive." The car is driving faster than the gas can be pumped. Price is outperforming the stablecoin supply—this is unsustainable and usually precedes a stall.
2. Lap Transitions (The Grey Lines)
These vertical markers signify a Regime Shift . They trigger the moment the momentum crosses the zero-axis, visually distinguishing the transition between a "Net-Refueling" period and a "Net-Exhaustion" period. While not used as direct entry signals, they define the Macro Lap we are currently in.
Operational Playbook: The Pit-Stop Signals
We don't just buy because the tank is full; we buy when the car exits the pits and begins to accelerate. This is captured by our proprietary Pit-Stop Pips.
• Blue Pip (Pit-Stop Buy): Triggered when the Refuel momentum has peaked and is now rotating back into the market. The refuel is complete; the car is rejoining the race with a full tank.
• Red Pip (Exhaust Sell): Triggered when the price acceleration has overextended relative to its fuel source and begins to "roll over." The tank is near empty; time for a tactical pull-back.
Settings & Calibration: The Pit Wall Dashboard
Signal Mode & Logic The engine features a dual-mode signaling system to adapt to different market conditions (or your personal preferred logic):
• Consecutive Mode: Best for high-velocity trends. Fires a pip after n bars of momentum reversal (Default: 2 bars).
• Percentage (%) Mode: Best for structural fades. Fires a pip when the momentum retraces by a specific percentage (e.g., 15%) from its local peak, regardless of the bar count.
Recommended Calibration
While the engine is versatile across various timeframes, the Weekly (1W) chart is the preferred setting for identifying high-conviction macro signals. Lower timeframes provide tactical speed, but the 1W frame offers significantly cleaner signals by filtering out the daily market noise.
Weekly (1W) — The Macro Signal (Preferred): * Velocity Lookback: 20 | Smoothing: 5.
Peak Lookback: 25 (Represents roughly half a year of telemetry data). This is a good starting point for identifying major cycle rotations.
Daily (1D) — The Tactical Pulse: * Velocity Lookback: 20 | Smoothing: 5.
Peak Lookback: 25 (Represents one trading month of telemetry). Useful for active swing traders looking for entry/exit timing within an established macro trend.
Technical Documentation
Data Sourcing & Aggregation The script utilizes request.security to aggregate a "Big Three" Stablecoin Market Cap (USDT + USDC + DAI). This prevents "False Exhaustion" signals caused by capital simply migrating between different stablecoin assets.
Mathematical Foundation The core engine calculates the Rate of Change (ROC) for the Aggregate Stablecoin Supply and BTC Price over a synchronized lookback window.
Formula Logic: Fuel Pressure = EMA ( ROC(Stables) - ROC(BTC) )
The Pit-Stop Pips utilize a local peak-finding algorithm via ta.highest and ta.lowest within a rolling 25-bar window to calculate the Relative Retracement Magnitude . This ensures signals are mathematically tied to the volatility of the current market regime.
The Dual-Fuel Framework: StableFlow x Liquisync
The StableFlow Engine is designed to function as the tactical counterpart to the Liquisync: Macro Pulse Engine . While Liquisync monitors the Global Supply Line (the "Tanker Truck" of M2 Liquidity moving from Central Banks toward the track with a 60-day lead), StableFlow measures the Immediate Fuel Pressure (the "Dry Powder" already in the pit lane, ready to be pumped into the car).
By using both indicators in tandem, you can follow the Dual-Fuel Strategy: Liquisync identifies the fundamental macro regime, while StableFlow identifies the specific "Refuel" and "Exhaustion" pivots within that regime. We will be providing a comprehensive breakdown of this synchronized telemetry in our upcoming Substack Masterclass: The Dual-Fuel Architecture.
Risk Disclaimer & Credits
The StableFlow is a thematic macro tool tracking on-chain liquidity proxies. Stablecoin data is subject to exchange reporting delays. This is not financial advice; it is a telemetry model for institutional education. Rob Maths is not liable for losses incurred via use of this model.
Tags:
indicator, bitcoin, btc, stablecoins, usdt, flow, liquidity, macro, refuel, institutional, robmaths, Rob Maths
Chỉ báo và chiến lược
TEDDY O. Confluence [MTF Dashboard]What's New?
Adjustable Table Size: I added a "Table Size" input in the settings. You can now toggle between Tiny, Small, Normal, and Large to fit your screen resolution perfectly.
New Column: "Bars Active": As a seasoned trader, knowing direction isn't enough; you need to know maturity.
This column counts how many candles the trade has been active.
Why it helps: A "LONG" signal on the 15m chart that is 1 bar old is a fresh entry opportunity. A "LONG" signal that is 45 bars old is likely overextended, even if the indicators are still green.
FPT - Dark Cloud & Piercing FPT – Dark Cloud & Piercing (GAP) is a minimalist candlestick pattern indicator designed to highlight classical two-candle reversal formations with strict gap requirements.
This tool focuses purely on price action and avoids unnecessary filters or conditions.
🔹 Patterns Detected
Bullish Piercing Line
First candle: Bearish
Second candle: Bullish
Second candle opens with a gap down
Close penetrates above the midpoint of the first candle’s real body
Does not fully engulf the first candle
Bearish Dark Cloud Cover
First candle: Bullish
Second candle: Bearish
Second candle opens with a gap up
Close penetrates below the midpoint of the first candle’s real body
Does not fully engulf the first candle
Only the pattern-forming candle (second candle) is highlighted to keep the chart clean and readable.
🎨 Customization
Enable Bullish, Bearish, or Both patterns
Fully customizable colors for each pattern via Inputs → Colors
Style tab colors are intentionally not used to avoid confusion
🎯 Design Philosophy
No indicators
No volatility or size filters
No trend assumptions
Just pure candlestick structure, exactly as defined in classical technical analysis.
This indicator is ideal for traders who combine:
Key levels
Supply & demand zones
Market structure
Session-based or discretionary analysis
⚠️ This indicator is a visual tool only and does not provide trade signals by itself.
Always use proper risk management.
Pivot & ORB Zones with Labels & Alerts//@version=5
indicator("Pivot & ORB Zones with Labels & Alerts", overlay=true, max_boxes_count=500)
// ───── Input Settings ─────
orbMinutes = input.int(15, "ORB Minutes")
showPD = input.bool(true, "Show Previous Day Zone")
showPM = input.bool(true, "Show Previous Month Zone")
showORB = input.bool(true, "Show ORB Zone")
// ───── Previous Day High / Low ─────
pdh = request.security(syminfo.tickerid, "D", high )
pdl = request.security(syminfo.tickerid, "D", low )
var box pdBox = na
if showPD
box.delete(pdBox)
pdBox := box.new(left=bar_index-100, right=bar_index, top=pdh, bottom=pdl, bgcolor=color.new(color.red, 80), border_color=color.red)
label.new(bar_index, pdh, "PDH", color=color.red, style=label.style_label_down, textcolor=color.white)
label.new(bar_index, pdl, "PDL", color=color.green, style=label.style_label_up, textcolor=color.white)
// ───── Previous Month High / Low ─────
pmh = request.security(syminfo.tickerid, "M", high )
pml = request.security(syminfo.tickerid, "M", low )
var box pmBox = na
if showPM
box.delete(pmBox)
pmBox := box.new(left=bar_index-100, right=bar_index, top=pmh, bottom=pml, bgcolor=color.new(color.orange, 80), border_color=color.orange)
label.new(bar_index, pmh, "PMH", color=color.orange, style=label.style_label_down, textcolor=color.white)
label.new(bar_index, pml, "PML", color=color.blue, style=label.style_label_up, textcolor=color.white)
// ───── ORB (Opening Range Breakout) ─────
var float orbHigh = na
var float orbLow = na
var box orbBox = na
var bool orbAlertHighTriggered = false
var bool orbAlertLowTriggered = false
sessionStart = timestamp("GMT+0", year, month, dayofmonth, hour, minute)
inORB = (timenow - sessionStart) <= orbMinutes * 60000
if inORB
orbHigh := na(orbHigh) ? high : math.max(orbHigh, high)
orbLow := na(orbLow) ? low : math.min(orbLow, low)
else
if not na(orbHigh) and showORB
box.delete(orbBox)
orbBox := box.new(left=bar_index - orbMinutes, right=bar_index, top=orbHigh, bottom=orbLow, bgcolor=color.new(color.yellow, 70), border_color=color.yellow)
label.new(bar_index, orbHigh, "ORB High", color=color.yellow, style=label.style_label_down, textcolor=color.black)
label.new(bar_index, orbLow, "ORB Low", color=color.yellow, style=label.style_label_up, textcolor=color.black)
orbHigh := na
orbLow := na
orbAlertHighTriggered := false
orbAlertLowTriggered := false
// ───── Alerts ─────
alertcondition(close >= pdh, title="Price hit PDH", message="Price touched PDH")
alertcondition(close <= pdl, title="Price hit PDL", message="Price touched PDL")
alertcondition(close >= pmh, title="Price hit PMH", message="Price touched PMH")
alertcondition(close <= pml, title="Price hit PML", message="Price touched PML")
alertcondition(showORB and not orbAlertHighTriggered and close >= orbHigh, title="Price hit ORB High", message="Price touched ORB High")
alertcondition(showORB and not orbAlertLowTriggered and close <= orbLow, title="Price hit ORB Low", message="Price touched ORB Low")
// Reset ORB alert triggers each session
if inORB == false
orbAlertHighTriggered := false
orbAlertLowTriggered := false
BB Squeeze - HighQToolsBBW Squeeze — HighQTools
As always, if anyone has any tips or additional features they'd like to see, feel free to reach out!
Overview
The BBW Percentile Squeeze highlights periods of exceptionally compressed volatility by measuring Bollinger Band Width (BBW) and ranking it within a rolling historical percentile. When BBW falls into the lowest portion of its own distribution, price is statistically “tight” relative to recent history—a condition that often precedes volatility expansion.
Instead of plotting an oscillator in a separate pane, this tool expresses information directly on the price chart by changing bar colors during squeeze conditions, keeping charts clean and execution-focused.
How It Works
Standard Bollinger Bands are calculated using a configurable length and standard deviation.
Band width is normalized and evaluated against a rolling lookback window.
The current width is converted into a percentile rank (0–100):
Lower percentile = tighter volatility
Higher percentile = expanded volatility
When the percentile drops below the user-defined threshold, the market is considered to be in a squeeze.
An optional RTH-only mode allows the percentile calculation to consider Regular Trading Hours bars only, which is especially useful for futures traders who want to ignore overnight volatility distortions.
Visual Signals
Squeeze Bars
Bars are recolored when BBW percentile falls below the selected threshold, indicating extreme compression.
Release Bar (optional)
The first bar exiting the squeeze can be highlighted separately, marking the resolution of compression.
No oscillator, no bands, no shapes—only context applied directly to price.
How to Use It
The squeeze itself is not a trade signal.
Squeeze conditions indicate stored energy—expect range expansion, not direction.
Focus on:
Market structure
Higher-timeframe context
Volume, delta, or acceptance/rejection
The release from squeeze often provides the best opportunity, especially when aligned with directional bias or structural breaks.
For best results, use this tool as a context filter alongside execution setups rather than as a standalone entry signal.
Recommended Settings
BB Length: 10
Std Dev: 2.0
Percentile Lookback: 200–300 bars
Squeeze Threshold: 5-10 percentile
RTH-only: Enabled for index futures
Disclaimer
This indicator is designed to provide context, not predictions. Always combine volatility information with sound risk management and a complete trading plan.
Last 30 days 9-12 avg range NYaverage range for NY time 9-12 in last 30 days. 9-12 will be highlighted and turn red on the 5m chart when price reaches a range bigger than the average in the last 30 days for that time.
Archetype Zones, Defense Confirmation OverlayArchetype Zones + Defense Confirmation Overlay (MST) v1.0
This indicator is a time-structure execution overlay built for fast intraday futures trading. It highlights a curated set of high-ROI market timing windows (MST / America/Denver) and applies lightweight “not-too-strict” logic to classify each window as a likely:
Driver (initiative / directional push)
Continuation (follow-through of the parent move)
Trap (liquidity sweep + stall / possible flip)
Rotation (VWAP churn + contraction / stand down conditions)
On top of the time zones, it includes a Defense Confirmation Overlay designed for 1–5 second execution, helping identify moments when price shows “defense behavior” aligned with the expected directional bias of the active zone.
What It Does
1) Time-Based Archetype Zones (MST)
The script shades key intraday windows with a configurable soft buffer (+/- minutes) so the user can anticipate action before/after the exact minute.
Each zone can output an expected directional lean using:
Displacement vs. window span
VWAP location
VWAP crossing count (chop filter)
Basic structure checks for continuation
Sweep/stall logic for trap detection
Churn + contraction logic for rotation regimes
2) Expected Direction Engine
When a zone is active, the indicator calculates the “expected direction” for that specific zone using the archetype logic.
This expected direction is used as the baseline for the Defense module, so defense markers are context-aware.
3) Defense Confirmation Overlay (Execution Layer)
Defense is intended to represent institutional-style protection or rejection inside an active zone.
It looks for:
Strong wick dominance (wick as a percentage of total candle span)
Close location in the top/bottom portion of the candle
Optional absorption highlight: volume spike plus compressed candle span (high volume, low range)
When conditions align with the zone’s expected direction, the script can show:
Defense wick markers (below-bar for buy defense, above-bar for sell defense)
Absorption highlight on bars showing absorption behavior
4) Micro Defense Box
When a defense event triggers, the script can draw a small “defense box” at the defended level with tick-padding.
The box extends right until invalidated (price closes through the box boundary).
This provides a clean visual reference for:
Defended price location
Invalidation threshold
Follow-through behavior after defense
5) Entry Permission Label
When Defense + Absorption occur together during an active zone, the script can print an “Entry Permission” label to highlight that multiple confirmations aligned.
Inputs and Customization
Zone buffer (+/- minutes)
Zone shading opacity
Toggle zone labels, defense markers, absorption highlighting, defense box, permission label
Adjustable “not too strict” archetype thresholds (designed for practical use, not curve-fitting)
Adjustable defense wick/close thresholds and absorption parameters
Notes and Disclaimer
This indicator does not predict the market with certainty.
It is designed to provide time-structure context plus execution confirmation, not standalone buy/sell signals.
It is best used alongside trend/bias tools (VWAP, structure, higher-timeframe levels, key session highs/lows).
Always test settings on your market and timeframe before live use.
CAPEX//@version=6
indicator("美光 CapEx 噴發追蹤器", overlay=true)
// --- 輸入設定 ---
threshold = input.float(20.0, title="CapEx 噴發閾值 (%)", minval=1.0)
lookback = input.int(4, title="對比前幾季", minval=1)
// --- 取得財務數據 (資本支出 - 季度) ---
// 使用 request.financial 抓取美光的資本支出 (Capital Expenditures)
capex = request.financial("NASDAQ:MU", "CAPITAL_EXPENDITURES", "FQ")
// --- 計算變動率 ---
// 因為財務數據在圖表上是階梯狀的，我們取當前有效值
current_capex = nz(capex)
prev_capex = nz(capex )
// 計算增長率 (注意：capex 在財報是負數，所以我們取絕對值來計算)
capex_growth = (math.abs(current_capex) - math.abs(prev_capex)) / math.abs(prev_capex) * 100
// --- 判斷噴發條件 ---
is_surge = capex_growth >= threshold
// --- 繪製視覺效果 ---
// 當 CapEx 噴發時，背景顯示紅色 (代表擴產警訊)
bgcolor(is_surge ? color.new(color.red, 85) : na, title="CapEx 噴發區間")
// 在圖表下方標註文字
plotshape(is_surge, style=shape.labelup, location=location.bottom, color=color.red, text="CapEx 激增", textcolor=color.white, size=size.small)
// --- 儀表板 (選用) ---
var table tb = table.new(position.top_right, 2, 2, bgcolor=color.new(color.black, 70), border_width=1)
if barstate.islast
table.cell(tb, 0, 0, "本季 CapEx:", text_color=color.white)
table.cell(tb, 1, 0, str.tostring(current_capex / 1e9, "#.##") + " B", text_color=color.red)
table.cell(tb, 0, 1, "較上季增長:", text_color=color.white)
table.cell(tb, 1, 1, str.tostring(capex_growth, "#.##") + "%", text_color=is_surge ? color.red : color.green)
Daily High Low XAUUSD by RizalIndikator ini untuk mengetahui high low daily chart XAUUSD di timeframe 4h
Relative Strength Index, Divergences, color and more lines.Modified RSI technical indicator with divergences. Additional colors and more lines have been added.
ATR Based SL & TP Targets from Entry (Long/Short)ATR-based target helper for manual trade planning.
Plots a single entry level plus ATR-based stop loss and take-profit targets on the price scale. The script uses a standard ATR (default 14) and lets you select the position side (Long or Short). For Long positions, it places the stop loss 1× ATR below the entry and take-profit levels at 1, 2, 3, and 4× ATR above. For Short positions, it mirrors this logic, placing the stop 1× ATR above the entry and targets 1–4× ATR below. You can adjust the entry price and ATR multipliers from the settings, and all levels update instantly, giving a clean visual of your risk and reward targets on the price scale.
-------------------
Tip:
After entry, and after I set my SL & TP levels, I hide the indicator until it's needed again.
Intraday Market Context (Trend & Risk)📌 Intraday Market Context (Trend & Risk)
Overview
Intraday Market Context (Trend & Risk) is a non-signal, informational indicator designed to provide a high-level view of current market conditions. Instead of generating buy or sell signals, this tool helps traders understand what kind of market they are operating in and how cautious or aggressive they should be.The output is shown as a clean, fixed on-chart box with plain-language guidance.
What This Indicator Shows
The indicator displays three simple elements:
1️⃣ Market Type
Identifies the current market environment:
Trending Market
Sideways Market
Expanding / Breakout Market
Unclear Market
2️⃣ Risk Mode
Provides a relative assessment of market risk:
Normal Risk
Medium Risk
High Risk
This is contextual information only and does not imply trade direction.
3️⃣ What to Do
Plain-language behavioral guidance, not trade instructions:
Trend is Friend
Range is Friend
Wait for Pullback
Stay Out
These phrases are meant to guide trader behavior, not trigger trades.
How to Use
Use this indicator as a market context filter, not as a trading signal
Decide when to trade, trade cautiously, or stay out
Use your own execution tools (price action, EMAs, VWAP, structure, etc.) for entries and exits
Respect “Stay Out” conditions to avoid over-trading in unfavorable environments
This indicator works best as a decision-support overlay, especially for intraday traders.
What This Indicator Is NOT
❌ Not a buy/sell signal
❌ Not a trading strategy
❌ Not predictive
❌ Not a replacement for risk management
Important Disclaimer
This indicator is provided for educational and informational purposes only.It does not constitute financial advice, investment advice, or a recommendation to trade any instrument.Trading involves risk, and losses can exceed expectations. Always use proper risk management and make your own trading decisions.
Dual MACD CrossWhat Is This Indicator?
This indicator is a visual tool for reading changes in market momentum.
Instead of giving buy or sell orders, it helps you see when the market’s short-term behavior starts to differ from its underlying direction. Think of it as a way to observe shifts in mood rather than make automatic decisions.
What Do the Lines Mean?
You will see three visual elements:
The thin green line represents the market’s short-term momentum.
It reacts quickly to recent price changes and shows what the market is doing right now.
The thicker white line represents the market’s reference trend.
It moves more slowly and reflects the broader, more stable direction of the market.
The yellow dotted line is the zero baseline.
It does not generate signals. Its only purpose is to help you visually judge whether momentum is generally positive (above zero) or negative (below zero).
How Should This Indicator Be Read?
The key is the relationship between the green and white lines.
When the green line is above the white line, short-term momentum is stronger than the market’s reference trend.
When the green line is below the white line, short-term momentum is weaker.
The indicator is not concerned with how high or low the lines are by themselves.
What matters is how they interact.
What Do the Triangle Markers Mean?
The small triangle markers highlight moments of transition.
An upward triangle appears when the green line crosses above the white line.
This suggests that short-term momentum is beginning to outperform the broader trend.
A downward triangle appears when the green line crosses below the white line.
This suggests that momentum is weakening relative to the broader trend.
These markers are attention points, not commands. They indicate potential change, not certainty.
Why Is the Zero Line Important?
The zero line provides context.
A crossover that happens above the zero line occurs while the market is already in a relatively strong state.
A crossover below the zero line happens in a weaker environment and may represent a failed move or an early attempt at reversal.
The same crossover can mean very different things depending on its position relative to zero.
What Is This Indicator Best Used For?
This indicator is best used to:
Observe early signs of trend changes
Compare short-term momentum versus underlying direction
Confirm what you are already seeing in price action or other indicators
It is not designed to:
Predict tops or bottoms precisely
Act as a standalone buy/sell system
Measure overbought or oversold conditions
A Simple Analogy
Imagine driving a car.
The green line is how hard you are pressing the accelerator.
The white line is your current speed.
The yellow zero line is the difference between moving forward or backward.
The triangles mark moments when acceleration begins to change the car’s actual movement.
The indicator helps you notice when effort starts to translate into direction.
The Right Way to Use It
This indicator does not tell you what to do.
It encourages you to ask better questions:
Is momentum starting to lead or lag?
Is this change supported by price structure?
Does the broader context confirm or contradict this signal?
Used this way, it becomes a tool for awareness, not prediction.
If you’d like, I can also provide:
A one-paragraph version for documentation
A training script for beginners
Or a minimal tooltip-style explanation for sharing with others
Elite MTF EMA ReclaimThis indicator is a trend-continuation tool, not a scalper.
Its purpose is to help you enter clean pullback trades in strong trends while blocking chop and low-quality setups.
It works by:
Requiring Daily + 1H trend alignment
Enforcing EMA structure (5/10/20/50) on the execution timeframe
Confirming momentum expansion using EMA slope + curvature
Blocking trades when conditions are choppy (low ATR, weak ADX, tight EMAs, recent EMA crosses)
Triggering entries only after a Pullback → Reclaim → (optional) Retest
How to use it:
Trade on the 6-minute chart (Forex works best based on default setting) but is adaptable to any market by changing settings
Wait for LONG / SHORT triangles only when no CHOP or HTF block is shown
Enter on the signal, place stops beyond EMA 50 or structure, target 2R–4R+
Expect fewer but higher-quality trades
What it’s not:
Not a breakout or range-trading indicator
Not meant to fire many signals
Not for choppy or low-volatility markets
Bottom line:
It helps you trade with higher-timeframe momentum, enter after pullbacks, and avoid bad market conditions.
Relative Strength Index - More Lines, Color and Divergence.Modified RSI technical indicator with divergences. Additional colors and more lines have been added.Enjoy.
Fractal HTF Lines The indicator “Fractal HTF Lines” draws time‑based vertical lines that mark where higher‑timeframe periods start on your chart. It adapts its behavior to the timeframe you are currently viewing.
4‑hour timeframe
On a 4‑hour chart, the indicator draws a vertical line on the first 4‑hour bar of each new trading day. This lets you quickly see where one day ends and the next begins without turning on session breaks.
Daily timeframe
On a daily chart, the indicator draws a vertical line on the first trading day of each new week. Visually, this separates weeks so you can see weekly structure while still trading and analyzing on the daily timeframe.
Weekly timeframe
On a weekly chart, the indicator draws a vertical line on the first trading week of each new month. That way you can identify monthly boundaries directly on the weekly chart and better align your analysis with monthly cycles.
Customization
The indicator includes settings to control:
Line color: You can choose any color from the palette.
Line width: You can adjust the thickness to make lines more or less prominent.
Line opacity: You can make lines more transparent or more solid, depending on how strong you want the visual emphasis.
Spike Detector (Ticks/Points)Spike Detector (Ticks / Points)
What This Indicator Does
Spike Detector (Ticks / Points) helps you easily spot large, high-volatility candles on your chart. These “spike” candles often happen during strong momentum, breakouts, stop runs, or sudden reversals.
Instead of guessing whether a candle is “big enough,” this indicator automatically measures each candle’s size and highlights it when it exceeds a threshold you choose.
How It Works (Simple Explanation)
The indicator measures the high-to-low range of every candle
It converts that range into ticks using the instrument’s minimum tick size
If the candle size is equal to or greater than your selected threshold, it is marked as a spike
Spike candles are:
Colored green for bullish candles
Colored red for bearish candles
A label is placed on the chart showing the candle size in ticks or points
This logic is non-repainting and works on all timeframes.
Inputs Explained
Spike Size Threshold
The minimum candle size required to be considered a spike (measured in ticks)
Display Unit (Ticks / Points)
Choose whether the label shows the candle size in:
Ticks (recommended for futures)
Points (useful for stocks and indices)
Label Offset
Adjusts how far above or below the candle the label appears
How to Use This Indicator
This indicator is meant to be used as a visual tool, not a standalone trading system.
Common ways traders use it:
Identify momentum ignition candles
Spot stop runs or liquidity grabs
Confirm breakouts with strong candle expansion
Avoid entering trades during abnormally volatile bars
Study volatility behavior during specific sessions
Many traders combine this with:
Market structure
Support & resistance
Trend direction
Volume or session context
Tips for Best Results
Start with a moderate threshold and adjust based on the market you trade
Higher timeframes usually need larger thresholds
Futures traders may prefer tick mode, while stock traders may prefer points
Use spike candles as context, not signals by themselves
Notes
Works on all symbols that support tick size data
Does not repaint
Designed to be lightweight and easy to read
Disclaimer
This indicator is for educational and informational purposes only. It does not provide trade signals or financial advice. Always manage risk appropriately.
ZLT - Date and Time MarkerPine Script v5 indicator called “DateTime Marker” that overlays on the chart and marks bars whose timestamp matches a user-defined schedule. When a bar “matches,” it can draw:
a vertical line through the bar,
a label with a time/date string, and
a triangle marker below the bar (always plotted on matches).
What you can configure
Marker Type (the matching rule)
You choose one of five modes:
Every Minute
Inputs: everyNMinutes (default 15), minuteOffset (default 0)
Match condition: minute % everyNMinutes == minuteOffset
Example with defaults: marks bars at :00, :15, :30, :45 each hour.
Hourly
Inputs: everyNHours (default 4), hourlyMinute (default 0)
Match condition: hour % everyNHours == 0 AND minute == hourlyMinute
Example with defaults: marks bars at 00:00, 04:00, 08:00, 12:00, 16:00, 20:00 (at minute 00).
Daily Time
Inputs: dailyHour (default 10), dailyMinute (default 0)
Match condition: hour == dailyHour AND minute == dailyMinute
Example with defaults: marks 10:00 every day.
Weekly Day & Time
Inputs: weekDay (default Tuesday), weeklyHour (default 16), weeklyMinute (default 0)
It converts the weekday name to Pine’s dayofweek number via getDayNumber().
Match condition: dayofweek == targetDay AND hour == weeklyHour AND minute == weeklyMinute
Example with defaults: marks Tuesday 16:00.
Monthly Date & Time
Inputs: monthlyDay (default 2), monthlyHour (default 23), monthlyMinute (default 0)
Match condition: dayofmonth == monthlyDay AND hour == monthlyHour AND minute == monthlyMinute
Example with defaults: marks the 2nd day of each month at 23:00.
Visual settings
showLine: whether to draw the vertical line.
lineStyle: Solid/Dashed/Dotted (mapped to Pine line styles by getLineStyle()).
lineColor, lineWidth: styling for the line (width is rounded to an integer because Pine line width is integer).
showLabel: whether to draw a label.
labelColor: background color of the label (text is forced white).
What happens when a bar matches
When isMatch becomes true on a bar:
Vertical line: line.new() at that bar’s bar_index, from low to high, extended extend.both (so it spans the full chart vertically).
Label: label.new() at the bar’s high, with mode-specific text:
Minute/Hourly/Daily: "HH:mm"
Weekly: "Tuesday HH:mm" (or whatever day selected)
Monthly: "Day 2 - HH:mm" (or chosen day)
Triangle marker: plotshape() draws a triangle up below the bar on every match (this happens regardless of showLine / showLabel).
Important practical implications
This uses the bar’s exchange/chart time (TradingView’s time, hour, minute, etc.), so results depend on the symbol/session and chart timezone settings.
On timeframes coarser than 1 minute, “Every Minute” still checks only the bar’s timestamp minute value; it won’t mark intra-bar minutes that don’t exist as separate bars.
Because it can create many objects (lines/labels), it sets max_labels_count=500. Lines are not capped here, so very dense marking can still clutter the chart.
If you tell me your intended use (e.g., “mark NY open,” “mark every 15m candle close,” “mark macro events weekly”), I can point out whether the current matching logic fits that precisely or needs adjustments (sessions, timezones, avoiding duplicates, limiting lines, etc.).
MTF Auto Fibs + All Levels [Clean]auto fib off whatever higher time frame you want! Helps you seen levels faster and with out switch time frames
Kabroda BattleBox Command [Renderer]Kabroda BattleBox Command
This is a specialized visualization utility designed to render pre-calculated institutional price levels on your chart. It is intended for traders who utilize the Kabroda Daily Calibration method to define their intraday execution framework.
How it Works: This script does not calculate levels internally. Instead, it serves as a "renderer" for external data.
Input: The user inputs a comma-separated data string (generated daily via their Kabroda Dashboard calibration) into the settings.
Parsing: The script parses this string to extract 6 key price coordinates: Daily Resistance, Breakout Trigger, Breakdown Trigger, Daily Support, and the 30-minute Opening Range High/Low.
Visualizing: It projects these levels forward in time for the current trading session.
Key Features:
Execution Levels: Plots specific Breakout and Breakdown triggers derived from the opening 30-minute volatility.
Liquidity Sessions: Automatically highlights key global trading hours (London Open, NY AM, NY PM, Tokyo, Sydney) based on New York Time, helping traders visualize volume injection points.
Imbalance Zones (Optional): Identifies and highlights market imbalances created by aggressive buying or selling, which often act as magnets for price re-tests.
Usage Guide:
Step 1: Obtain your daily data string.
Step 2: Open Indicator Settings -> "Daily Calibration".
Step 3: Paste the string into the "Paste Data String" field.
Step 4: The script will instantly render the day's battle map.
Disclaimer: This tool is a visualization aid. It requires valid external data to function. Without the daily input string, the chart will remain blank.
Multi-Mode Adaptive Strategy [MMAS]This Pine Script strategy dynamically adapts to different market conditions. Users can switch between trend‑following, mean‑reversion, and breakout modes, making it versatile across assets and timeframes.
Key Metrics:
- BTCUSDT / 1D → Return: +42.5%, Sharpe: 1.8, Max Drawdown: -12.3%, Win Rate: 61%
- XAGUSD / 1H → Return: +18.7%, Sharpe: 1.4, Max Drawdown: -8.5%, Win Rate: 58%
- EURUSD / 4H → Return: +25.2%, Sharpe: 1.6, Max Drawdown: -10.1%, Win Rate: 60%
Key Features:
- Modular design: switch between trend, mean‑reversion, breakout
- Works across crypto, forex, commodities
- Clear visualization with signals and metrics
• Global Note
"Universal strategy design for cross‑asset adaptability."
• Tags
trend, mean‑reversion, breakout, multi‑asset, adaptive strategy, pine script
FX-CLINIC MARKET STRUCTUREThis indicator help the treaders by SMC/ICt to mark the structure MSS/BOS automatically, and you can choose the length of the structure as 5 for fractal, 10 for internal and 15 for external
use it free
note: check your information and correct the structure as you know,
it is first edition and go to upgrade and correct
feel free to sent any note in telegram
privet: @DRALIAWWAD
and the public channel: @ictdrawwad
