Bắt đầu

Điểm Pivot và cấp độ

Quantura - Trendchange ZonesIntroduction “Quantura – Trendchange Zones” is an advanced technical indicator that identifies and visualizes potential market reversal zones using dynamic RSI-based logic. It highlights areas of overbought and oversold conditions, marking them as visual zones directly on the price chart, and generates corresponding bullish and bearish signals when the RSI exits these extremes. The tool helps traders anticipate possible trend change regions and confirm momentum shifts in a clean, intuitive way. Originality & Value Unlike traditional RSI indicators that only show a static oscillator, this tool transforms RSI behavior into on-chart visual zones that represent structural overbought and oversold phases. It converts RSI threshold breaches into price-based regions (boxes) and marks reversal signals at the moment of momentum change. The indicator’s originality and usefulness come from its: Direct visualization of RSI overbought and oversold areas as dynamic chart zones. Automatic detection of potential reversal regions where momentum exhaustion is likely. Integration of RSI-based signals and visual cues without requiring users to monitor the RSI window. Adjustable sensitivity for RSI length and upper/lower levels. Clear color-coded separation of bullish and bearish phases. Functionality & Core Logic The indicator continuously monitors RSI values relative to the user-defined thresholds. When RSI moves above the upper level, an Overbought Zone is created and extends until RSI falls back below that threshold. When RSI moves below the lower level, an Oversold Zone is generated and extends until RSI returns above that level. When RSI exits one of these zones, a corresponding Trendchange Signal (▲ bullish or ▼ bearish) appears at the transition point. Each zone dynamically adjusts its high and low levels during formation, representing the complete range of the exhaustion phase. Parameters & Customization RSI Length: Defines the sensitivity of RSI calculation. Shorter lengths make signals more responsive; longer lengths filter noise. Upper Level / Lower Level: Set thresholds for overbought and oversold conditions (default 70 / 30). Signals: Toggle on/off for displaying bullish (▲) and bearish (▼) reversal signals. Zones: Toggle the visualization of shaded RSI-based zones. Colors: Fully customizable bullish and bearish colors for both signals and zones. Visualization & Display Bullish reversal zones (oversold exits) are shaded using the chosen bullish color (default: blue). Bearish reversal zones (overbought exits) are shaded using the chosen bearish color (default: red). Each completed zone is outlined and filled with transparent shading for better clarity. Reversal arrows (▲ for bullish, ▼ for bearish) are displayed at the bar where RSI exits the extreme level. Clean overlay design ensures compatibility with any chart style or color scheme. Use Cases Identify overbought and oversold periods directly on the price chart without switching to the RSI window. Anticipate potential market reversals or exhaustion points based on RSI momentum shifts. Combine with trend indicators, moving averages, or volume tools for confirmation. Apply across multiple timeframes to align short-term reversal signals with higher timeframe momentum. Use zone width and duration to assess the strength and persistence of overbought/oversold conditions. Limitations & Recommendations The indicator is not a standalone trading system but a visual confirmation tool. False signals may occur in strongly trending markets where RSI remains overextended. Optimal RSI settings may differ between assets (e.g., crypto vs. equities). Combining this indicator with additional trend or structure filters can enhance accuracy. Markets & Timeframes The “Quantura – Trendchange Zones” indicator works across all markets and timeframes, including cryptocurrencies, Forex, stocks, and commodities. It is suitable for both short-term scalping and long-term swing analysis. Author & Access Developed 100% by Quantura. Published as a Open-source script indicator. Access is free. Important This description complies with TradingView’s Script Publishing and House Rules. It provides a clear explanation of the indicator’s originality, logic, and function while avoiding unrealistic performance or predictive claims.
Chỉ báo Pine Script®
của Quantura
3
Quantura - Liquidity Sweep & Run LevelsIntroduction “Quantura – Liquidity Sweep & Run Levels” is a structural price-action indicator designed to automatically detect swing-based liquidity zones and visualize potential sweep and run events. It helps traders identify areas where liquidity has likely been taken (sweep) or released (run), improving precision in market structure analysis and timing of entries or exits. Originality & Value This tool translates institutional liquidity concepts into an automated visual framework. Instead of simply marking highs and lows, it dynamically monitors swing points, tracks their breaches, and identifies subsequent reactions. The indicator is built to highlight the liquidity dynamics that often precede reversals or continuations. Its originality lies in: Automatic identification and tracking of swing highs and lows. Real-time detection of broken levels and liquidity sweeps. Distinction between “Run” and “Sweep” modes for different market behaviors. Persistent historical visualization of liquidity levels using clean line structures. Configurable signal markers for bullish and bearish sweep confirmations. Functionality & Core Logic Detects swing highs and lows using a user-defined Swing Length parameter. Stores and updates all swing levels dynamically with arrays for efficient memory handling. Draws horizontal lines from each detected swing point to visualize potential liquidity zones. Monitors when price breaks a swing level and marks that event as “broken.” Generates signals when the market either sweeps above/below or runs away from those levels, depending on the chosen mode. Provides optional visual signal markers (“▲” for bullish sweeps, “▼” for bearish sweeps). Parameters & Customization Mode: Choose between “Sweep” (detects liquidity grabs) or “Run” (detects breakout continuations). Swing Length: Sets the sensitivity for detecting swing highs/lows. A higher value focuses on larger structures, while smaller values detect micro liquidity points. Bullish Color / Bearish Color: Customize color themes for sweep/run lines and signal markers. Signals: Enables or disables visual up/down markers for confirmed events. Visualization & Display Horizontal lines represent potential liquidity levels (unbroken swing highs/lows). Once broken, lines automatically stop extending, marking the moment liquidity is taken. Depending on the selected mode: “Sweep” mode identifies false breaks or stop-hunt behavior. “Run” mode highlights breakouts that continue the trend. Colored arrows indicate the direction and type of liquidity reaction. Clean, non-intrusive visualization suitable for overlaying on price charts. Use Cases Detect liquidity sweeps before major reversals. Identify breakout continuations after liquidity runs. Combine with Supply/Demand or FVG indicators for multi-layered confirmation. Validate liquidity bias in algorithmic or discretionary strategies. Analyze market manipulation patterns and institutional stop-hunting behavior. Limitations & Recommendations This indicator identifies structural behavior but does not guarantee trade direction or profitability. Works best on liquid markets with clear swing structures (e.g., crypto, forex, indices). Signal interpretation should be combined with confluence tools such as volume, order flow, or structure-based filters. Excessively small swing settings may cause over-signaling in volatile markets. Markets & Timeframes Optimized for all major asset classes — including crypto, Forex, indices, and equities — and for intraday to higher-timeframe structural analysis (5-minute up to daily charts). Author & Access Developed 100% by Quantura. Published as a Open-source script indicator. Access is free. Compliance Note This description fully complies with TradingView’s Script Publishing Rules and House Rules . It avoids performance claims, provides transparency on methodology, and clearly describes indicator behavior and limitations.
Chỉ báo Pine Script®
của Quantura
Market Structure Trailing Stop MTF [Inspired by LuxAlgo]# Market Structure Trailing Stop MTF **OPEN-SOURCE SCRIPT** *208k+ views on original · Modified for MTF Support* This indicator is a direct adaptation of the renowned **Market Structure Trailing Stop** by **LuxAlgo** (original script: [Market Structure Trailing Stop ]()). The core logic remains untouched, providing dynamic trailing stops based on market structure breaks (CHoCH/BOS). The **only modification** is the addition of **Multi-Timeframe (MTF) support**, allowing users to apply the trailing stops and structures from **higher timeframes (HTF)** directly on their current chart. This enhances usability for traders analyzing cross-timeframe confluence without switching charts. **Special thanks to LuxAlgo** for releasing this powerful open-source tool under CC BY-NC-SA 4.0. Your contributions to the TradingView community have inspired countless traders—grateful for the solid foundation! ## 🔶 How the Script Works: A Deep Dive At its heart, this indicator detects **market structure shifts** (bullish or bearish breaks of swing highs/lows) and uses them to generate **adaptive trailing stops**. These stops trail the price while protecting profits and acting as dynamic support/resistance levels. The MTF enhancement pulls this logic from user-specified higher timeframes, overlaying HTF structures and stops on the lower timeframe chart for seamless multi-timeframe analysis. ### Core Logic (Unchanged from LuxAlgo's Original) 1. **Pivot Detection**: - Uses `ta.pivothigh()` and `ta.pivotlow()` with a user-defined lookback (`length`) to identify swing highs (PH) and lows (PL). - Coordinates (price `y` and bar index/time `x`) are stored in persistent variables (`var`) for tracking recent pivots. 2. **Market Structure Detection**: - **Bullish Structure (BOS/CHoCH)**: Triggers when `close > recent PH` (break above swing high). - If `resetOn = 'CHoCH'`, resets only on major shifts (Change of Character); otherwise, on all breaks. - Sets trend state `os = 1` (bullish) and highlights the break with a horizontal line (dashed for CHoCH, dotted for BOS). - Initializes trailing stop at the local minimum (lowest low since the pivot) using a backward loop: `btm = math.min(low , btm)`. - **Bearish Structure**: Triggers when `close < recent PL`, mirroring the bullish logic (`os = -1`, local maximum for stop). - Structure state `ms` tracks the break type (1 for bull, -1 for bear, 0 neutral), resetting based on user settings. 3. **Trailing Stop Calculation**: - Tracks **trailing max/min**: - On new bull structure: Reset `max = close`. - On new bear: Reset `min = close`. - Otherwise: `max = math.max(close, max)` / `min = math.min(close, min)`. - **Stop Adjustment** (the "trailing" magic): - On fresh structure: `ts = btm` (bull) or `top` (bear). - In ongoing trend: Increment/decrement by a percentage of the max/min change: - Bull: `ts += (max - max ) * (incr / 100)` - Bear: `ts += (min - min ) * (incr / 100)` - This creates a **ratcheting effect**: Stops move favorably with the trend but never against it, converging toward price at a controlled rate. - **Visuals**: - Plots `ts` line colored by trend (teal for bull, red for bear). - Fills area between `close` and `ts` (orange on retracements). - Draws structure lines from pivot to break point. 4. **Edge Cases**: - Variables like `ph_cross`/`pl_cross` prevent multiple triggers on the same pivot. - Neutral state (`ms = 0`) preserves prior `max/min` until a new structure. ### MTF Enhancement (Our Addition) - **request.security() Integration**: - Wraps the entire core function `f()` in a security call for each timeframe (`tf1`, `tf2`). - Returns HTF values (e.g., `ts1`, `os1`, structure times/prices) to the chart's context. - Uses `lookahead=barmerge.lookahead_off` for accurate historical repainting-free data. - Structures are drawn using `xloc.bar_time` to align HTF lines precisely on the LTF chart. - **Multi-Output Handling**: - Separate plots/fills/lines for each TF (e.g., `plot_ts1`, `plot_ts2`). - Colors and toggles per TF to distinguish HTF1 (e.g., teal/red) from HTF2 (e.g., blue/maroon). - **Benefits**: Spot HTF bias on LTF entries, e.g., enter longs only if both TF1 (1H) and TF2 (4H) show bullish `os=1`. This keeps the script lightweight—**no repainting, max 500 lines**, and fully compatible with LuxAlgo's original behavior when TFs are set to the chart's timeframe. ## 🔶 SETTINGS ### Core Parameters - **Pivot Lookback** (`length = 14`): Bars left/right for pivot detection. Higher = smoother structures, fewer signals; lower = more noise. - **Increment Factor %** (`incr = 100`): Speed of stop convergence (0-∞). 100% = full ratchet (mirrors max/min exactly); <100% = slower trail, reduces whipsaws. - **Reset Stop On** (`'CHoCH'`): `'CHoCH'` = Reset only on major reversals (dashed lines); `'All'` = Reset on every BOS/CHoCH (tighter stops). ### MTF Support - **Timeframe 1** (`tf1 = ""`): HTF for first set (e.g., "1H"). Empty = current chart. - **Timeframe 2** (`tf2 = ""`): Second HTF (e.g., "4H"). Enables dual confluence. ### Display Toggles - **Show Structures** (`true`): Draws horizontal lines for breaks (per TF colors). - **Show Trailing Stop TF1/TF2** (`true`): Plots the stop line. - **Show Fill TF1/TF2** (`true`): Area fill between close and stop. ### Candle Coloring (Optional) - **Color Candles** (`false`): Enables custom `plotcandle` for body/wick/border. - **Candle Color Based On TF** (`"None"`): `"TF1"`, `"TF2"`, or none. Colors bull trend green, bear red. - **Candle Colors**: Separate inputs for bull/bear body, wick, border (e.g., solid green body, transparent wick). ### Alerts - **Enable MS Break Alerts** (`false`): Notifies on structure breaks (bull/bear per TF) **only on bar close** (`barstate.isconfirmed` + `alert.freq_once_per_bar_close`). - **Enable Stop Hit Alerts** (`false`): Triggers on stop breaches (long/short per TF), using `ta.crossunder/crossover`. ### Colors - **TF1 Colors**: Bullish (teal), Bearish (red), Retracement (orange). - **TF2 Colors**: Bullish (blue), Bearish (maroon), Retracement (orange). - **Area Transparency** (`80`): Fill opacity (0-100). ## 🔶 USAGE Trailing stops shine in **trend-following strategies**: - **Entries**: Use structure breaks as signals (e.g., long on bullish BOS from HTF1). - **Exits**: Trail stops for profit-locking; alert on hits for automation. - **Confluence**: Overlay HTF1 (e.g., 1H) for bias, HTF2 (e.g., Daily) for major levels—enter LTF only on alignment. - **Risk Management**: Lower `incr` avoids early stops in chop; reset on `'All'` for aggressive trailing. ! (i.imgur.com) *HTF1 shows bullish structure (teal line), trailing stop ratchets up—long entry confirmed on LTF pullback.* ! (i.imgur.com) *TF1 (blue) bearish, TF2 (red) neutral—avoid shorts until alignment.* ! (i.imgur.com) *Colored based on TF1 trend: Green bodies on bull `os=1`.* Pro Tip: Test on demo—pair with LuxAlgo's other tools like Smart Money Concepts for full structure ecosystem. ## 🔶 DETAILS: Mathematical Breakdown On bullish break: - Local min: `btm = ta.lowest(n - ph_x)` (optimized loop equivalent). - Stop init: `ts = btm`. - Update: `Δmax = max - max `, `ts_new = ts + Δmax * (incr/100)`. Bearish mirrors with `Δmin` (negative, so decrements `ts`). In MTF: HTF `time` aligns lines via `line.new(htf_time, level, current_time, level, xloc.bar_time)`. No logs/math libs needed—pure Pine v5 efficiency. ## Disclaimer This is for educational purposes. Not financial advice. Backtest thoroughly. Original by LuxAlgo—modify at your risk. See TradingView's (www.tradingview.com). Licensed under CC BY-NC-SA 4.0 (attribution to LuxAlgo required).
Chỉ báo Pine Script®
của RAJATAMIL
PIVOT-V.13 05-09-25This Pine Script automatically detects pivot levels and generates buy/sell signals based on price action around those pivots. It identifies key support and resistance zones derived from previous period highs, lows, and closes, then marks optimal entry, target, and stop-loss levels on the chart. The script is designed to assist traders in systematic decision-making using pivot-based strategies. 🔍 Core Features Automatic Pivot Detection: Calculates and updates pivots in real-time using standard formulas. Smart Trade Setup: Buy Signal: Triggered when price action confirms strength above a pivot or resistance level. Sell Signal: Triggered when price action confirms weakness below a pivot or support level. Entry, Target & Stop-Loss Levels: Automatically plots potential entry points, stop-loss levels, and take-profit zones based on the nearest pivot structure. Customizable Settings: Choose pivot type and timeframe (daily, weekly, or monthly). Adjust risk ratio, stop size, and confirmation filters. Enable/disable visual labels or alerts. Visual Clarity: Clearly marks all pivot levels and trade signals on the chart with colored labels and lines. 🎯 Purpose This script helps traders quickly identify high-probability entry zones and maintain disciplined trade management by following pre-defined pivot-based rules — reducing emotional bias and enhancing consistency.
Chỉ báo Pine Script®
của noptionindex
Trappp's Advanced Multi-Timeframe Trading ToolkitTrappp's Advanced Multi-Timeframe Trading Toolkit This comprehensive trading script by Trappp provides a complete market analysis framework with multiple timeframe support and resistance levels. The indicator features: Key Levels: · Monthly (light blue dashed) and Weekly (gold dashed) levels for long-term context · Previous day high/low (yellow) with range display · Pivot-based support/resistance (pink dashed) · Premarket levels (blue) for pre-market activity Intraday Levels: · 1-minute opening candle (red) · 5-minute (white), 15-minute (green), and 30-minute (purple) session levels · All intraday levels extend right throughout the trading day Technical Features: · EMA 50/200 cross detection with alert labels · Candlestick pattern recognition near key levels · Smart proximity detection using ATR · Automatic daily/weekly/monthly updates Trappp's script is designed for traders who need immediate visual reference of critical price levels across multiple timeframes, helping identify potential breakouts, reversals, and pattern-based setups with clear, color-coded visuals for quick decision-making.
Chỉ báo Pine Script®
của AntonioUA
LevelsLevels is a powerful technical analysis tool that automatically identifies and displays key support and resistance levels on the chart. The indicator analyzes historical price data, detecting significant price levels where multiple reversals or price stops have occurred. How the Indicator Works? 1. Identification of Reversal Points: - The indicator tracks price extremes using an algorithm to identify local highs and lows - A reversal point is recorded when: - Uptrend: price reaches a new low for the last 10 bars - Downtrend: price reaches a new high for the last 10 bars 2. Level Grouping: - All found reversal points are analyzed and grouped into key levels - Levels are combined if they fall within the specified percentage tolerance 3. Filtering Significant Levels: - Only levels that have been tested the minimum number of times (set in settings) are preserved - This ensures only statistically significant levels are displayed How to Use the Indicator? Trading Scenarios: 1. Bounce from Level: - When price approaches an identified level, a bounce can be expected - Opening positions on the bounce with protective stop-loss beyond the level 2. Level Breakout: - Breaking through a key level may signal trend continuation - Support level becomes resistance and vice versa 3. Consolidation near Level: - Prolonged price presence near a level indicates its significance - Strong movement can be expected after exiting consolidation Advantages: - Automatic level identification eliminates subjectivity - Sensitivity customization for different timeframes and instruments - Visual simplicity - only significant levels Indicator Settings Main Parameters: - Show Key Levels - enable/disable level display - Level Tolerance (%) - percentage tolerance for level grouping - Smaller values: more levels, more precise - Larger values: fewer levels, more significant - Minimum Touches - minimum number of touches to form a level Visual Settings: - Level Color - level display color - Level Style - line style (solid, dashed, dotted) Limitations - Levels are built only on available historical data - Does not account for trading volumes - Parameter adjustment may be required during high volatility periods The indicator is particularly effective when combined with other analysis tools for signal confirmation.
Chỉ báo Pine Script®
của ALEKSEI_MAKSIMOV
1
Low and Preceding High (Breakout + Bullis fgv + Extending Fib)🚀 Last Low & Preceding High: Bullish Reversal Strategy This indicator identifies high-probability long setups by confirming a Bullish Market Structure Shift (BMS) coupled with a strong momentum filter. 🧠 Indicator Logic (How It Works) The core function of this tool is to automatically locate the key structural points that lead to a bullish bias: Structure Identification: It first defines a Range between the two most recent Pivot Lows. Within this range, it finds the Preceding High (the highest close before the current low) and the true Low Anchor (the lowest low/tail of the pivot low). Breakout and Momentum Filter: A valid signal requires two conditions to be met on the current bar: Bullish Breakout: The price must close above the Preceding High. Marubozu Confirmation: A strong Bullish Marubozu candle (minimal wicks) must be present in the impulse move from the low, filtering for institutional strength. Fibonacci Discount Zones: Upon confirmation, the indicator calculates and plots the discount zones (0.50, 0.618, 0.786) using the true extremes (tail-to-tail anchors). These zones start extending from the breakout candle and represent high-value areas for potential entries. 🎯 Entry and Risk Management The strategy provides clear rules for execution once the logic is confirmed: Entry Execution: Wait for Retracement: Enter a Long position when the price retraces back into the colored Discount Zones (0.50 to 0.786). Risk Control: 🛑 Stop Loss (SL): Placed below the Low Line (the swing low that initiated the move). ✅ Take Profit (TP): Placed above the High Line (the high that was broken). Final note "Special thanks to Mr. Mazen (@dr0chart) for developing this strategy."
Chỉ báo Pine Script®
của sn3osy_f16
Livelli OI-PNCOI-PNC Levels is a script that displays the open interest (OI) and net short positions (PNC) of a selection of 20 of the most significant stocks in terms of traded value on the Italian market. PNC are indicated by red dotted lines starting from the close of the last reported change date; The most significant open interest by number of contracts (Top 10 Calls and Top 10 Puts) are displayed using labels, all on a single line (Strike, CALL, PUT); A summary table can be activated. the data is hardcoded using static arrays and must be updated periodically. Data updated of 03/11/2025 ########### Italiano ############ Livelli OI-PNC è uno script che permette di visualizzare gli open interest (OI) e le Posizioni Nette Corte (PNC) di una selezione di 20 titoli tra i più significativi per controvalore movimentato del mercato italiano. Le PNC vengono indicate tramite Linee tratteggiate rosse che partono dal close della data di ultima variazione comunicata; Sono riportati tramite labels, gli Open Interest più significativi per num.Contratti (Top 10 Call e top 10 Put) tutto su una unica riga per ogni strike (Strike, CALL, PUT); E' attivabile una Tabella di riepilogo. Poiché Pine Script non può leggere direttamente file da URL esterni, i dati sono hardcorati tramite array statici e vanno aggiornati periodicamente. Dati aggiornati al 03/11/2025
Chỉ báo Pine Script®
của Peiorg
Structure Pro by MurshidfxInspired by the 'mentfx Structure' indicator created by Anton (mentfx) on TradingView, ## Overview Structure Pro tracks market structure by maintaining an adaptive dealing range and its midpoint. Swing highs and lows become structural boundaries, and the script responds to confirmed breakouts by recalculating the active range. Labels highlight the latest trend flip so the chart stays readable while the range evolves. ## Core Logic - Detects swing highs/lows using a configurable pivot strength and promotes confirmed pivots to structural levels. - Applies a percentage buffer to decide when price truly breaks structure; once triggered, the opposite boundary is recalculated with an anchor search that looks back through historical bars. - Computes equilibrium as the midpoint between the current structural high and low so you can gauge premium versus discount zones. - Emits a single BULL or BEAR label when the trend state changes, keeping only the most recent signal on the chart. ## How to Use 1. Open a clean chart and apply only this script. 2. Select a swing strength that matches the scale you want to monitor (lower values for responsive intraday swings, higher values for broader moves). 3. Tune the structure sensitivity percentage if you prefer tighter or looser confirmation before declaring a breakout. 4. Track DRH/DRL for the current dealing range, use the equilibrium line as a mean-reversion guide, and look to the BULL/BEAR label for structure confirmation. 5. Combine the levels with your own execution, risk, and position rules—this script does not manage orders. ## Inputs - Swing Point Strength: bars required on both sides to confirm a pivot. - Structure Break Sensitivity: percentage buffer applied to the range before calling a breakout. - Dealing Range display: toggles for visibility, line width/color, label text, and label size. - Equilibrium display: line style, width, and color controls. - Trend Signals: enable/disable labels, adjust text size, and pick label colors. ## Notes - Designed for live structure tracking; the script relies on confirmed pivots and does not peek into future data. - Built to be chart-agnostic for standard candles; non-standard chart types can distort the measurements. - Published open-source so traders can review and verify the implementation details.
Chỉ báo Pine Script®
của gilani9393
Advanced Liquidity Fibonacci Zones - Ace of TradesAdvanced Liquidity Fibonacci Zones – Ace of Trades Theory How to Use This Script: This advanced indicator visualizes key "liquidity zones" based on custom Fibonacci levels, reflecting the real areas where market makers, institutions, and advanced algorithms manage risk—far beyond basic retail “golden ratio” retracements. Unlike traditional tools, these zones align with the market maker theory popularized by Ace of Trades (@acethebully on X). How to Paint the Highs and Lows Select the Indicator ("Advanced Liquidity Fibonacci Zones – Ace of Trades Theory") and add it to your chart. Use the two input fields to manually mark your key swing points: Click the “Swing Low (0.0 Level)” input, then select a price bar on your chart for the swing low. Click the “Swing High (1.0 Level)” input, then select the bar for your swing high. These anchors will paint the exact price range that all fib zones are projected between. The script will automatically draw all major liquidity/retracement/extension zones as colored bands or boxes across your chart, extended into the future for clear reference. What Do the Zones Mean? Zones are based on Ace of Trades' market maker theory. They're not just “lines”—they show where professional liquidity providers, algorithms, and institutional traders strategically rebalance, accumulate, or distribute. Each zone is labeled with its precise fib ratio and price, with zone descriptions acknowledging their theoretical function (e.g., Golden Band, Momentum Pullback, Stop-Hunt Extension, Blow-Off Range, etc). Best Practices Use the script to identify areas where liquidity is expected to pool (for reaction or continuation), rather than just following retail golden ratios. Paint your swing highs/lows cleanly—from the local low before an impulse, to the most relevant high after a move (or vice versa for down moves). Observe how price reacts at these boundaries and plan entries/exits accordingly. Special thanks and all intellectual credit to Ace of Trades (@acethebully on X) for his public education and original market maker insights. This tool was developed to fully honor and operationalize the liquidity geometry theory from his work.
Chỉ báo Pine Script®
của SovereignCharts
1
Custom Horizontal Lines | Trade Symmetry📊 Custom Horizontal Lines 🔍 Overview The Custom Horizontal Lines is a precision utility designed for traders who perform manual higher-timeframe analysis and want to preserve their marked price levels directly on the chart. It doesn’t calculate or detect anything automatically — instead, it acts as your personal level memory, preserving your analyzed zones and reference prices throughout the session. Ideal for traders who manually mark the High, Low, Open, Close, Mean Thresholds, and Quarter Levels of Order Blocks, Fair Value Gaps, Inversion Fair Value Gaps and Wicks before the trading day begins. ⚙️ Key Features ✅ Manual Level Entry — Input your analyzed price levels (OB, FVG, WICK,etc) directly into the indicator settings. ✅ Preserved Levels — Once entered, your lines stay visible and consistent — even after switching symbols, timeframes, or reloading the chart. ✅ Supports All Level Types — Store any kind of manually defined level: OB highs/lows, FVG boundaries, Wicks, Mean Thresholds, Quarter levels, or custom reference prices. ✅ Clean Visualization — Customize line color, style, and labels for easy visual organization. ✅ Session-Ready Workflow — Built for pre-market preparation — enter your HTF levels once, and trade around them all day. ✅ No Auto Calculations — 100% manual by design — ensuring only your analyzed levels are shown, exactly as you defined them. 💡 How to Use Open the indicator’s settings and manually enter those price values. The indicator will plot and preserve those exact levels on your chart. Switch to your lower timeframe and observe how price reacts around them — without ever needing to redraw. 🎯 Why It’s Useful Keeps your HTF levels organized and persistent across sessions. Saves time by avoiding redrawing. Fits perfectly into ICT / Smart Money trading workflows. Ensures full manual control and precision over what’s displayed on your chart. 🧩 Ideal For ICT and Smart Money traders Institutional-style manual analysts Traders marking Mean Thresholds, or Quarter Levels of OBs, FVGs, Wicks etc Anyone who wants a clean, reliable way to preserve their manual analysis
Chỉ báo Pine Script®
của TradeSymmetry
Multi-timeframe Pivot PointThis indicator is a lightweight indicator designed to display higher timeframe pivot levels on your chart. It helps traders quickly identify key support and resistance zones derived from higher timeframes (such as daily or weekly pivots) while analyzing lower timeframes (e.g., 15m or 1h charts). Calculation Logic This indicator uses the classic pivot point formula, calculated from high, low, and close values: PP = (High + Low + Close) / 3 R1 = 2 * PP - Low S1 = 2 * PP - High R2 = PP + (High - Low) S2 = PP - (High - Low) R3 = R1 + (High - Low) S3 = S1 - (High - Low) Additionally, it includes breakout levels: HBOP = PP + PP + (High - Low) - Low LBOP = PP + PP - (High - Low) - High
Chỉ báo Pine Script®
của sugiking
Dynamic Auto Fibonacci - Auto/Manual ModeDynamic Auto Fibonacci - Professional Retracement & Extension Tool The ultimate Fibonacci tool combining automatic high detection with manual precision for swing low selection. 🎯 Key Features Hybrid Drawing System Auto Mode: You manually select your swing low by clicking on the chart, then the indicator automatically finds the highest high after that point - giving you control over your anchor while automating the rest Manual Mode: Full control - click to select BOTH your swing low (0.0) AND swing high (1.0) for complete precision - perfect for drawing multiple projections to find confluence zones Logarithmic Scale Support True logarithmic Fibonacci calculations for accurate levels on log-scale charts Essential for crypto and growth stocks with significant price appreciation Smart Level Management "Key Fibs Only" toggle (ON by default): Shows 13 essential professional levels All 23 levels unlocked: Turn off Key Fibs to access 10 additional advanced levels including 0.414, 0.707, 0.886, 1.886, 2.272, 3.618, and negative projections Every level is fully customizable - edit values, toggle on/off, change colors Essential Fibonacci Levels (Default) Core: 0.0, 0.236, 0.382, 0.5, 0.618 (Golden), 0.786, 1.0 Extensions: 1.272, 1.382, 1.618 (Golden), 2.0, 2.618 (Golden), 4.236 All golden ratio levels (0.618, 1.618, 2.618, 3.618) highlighted in gold Professional Display Options Three display modes: Retracements Only, Extensions Only, or Both Customizable line styles (Solid/Dashed/Dotted), widths, and lengths Clean text-only labels or traditional price scale labels Unified color override for minimalist chart aesthetics Adjustable label positioning and sizing Perfect for Professional Trading Add multiple instances with different manual anchors to identify high-probability confluence zones Combines the convenience of partial automation with the precision of manual anchor selection Works on all markets: stocks, forex, crypto, futures Compatible with all timeframes and markets. Clean code, efficient performance, zero repainting.
Chỉ báo Pine Script®
của SovereignCharts
1
Dynamic Auto FibonacciDynamic Auto Fibonacci - Logarithmic Fib Retracements & Extensions Overview Dynamic Auto Fibonacci is an advanced Fibonacci analysis tool that automatically identifies swing highs and lows to plot precise retracement and extension levels on your chart. Unlike traditional manual Fibonacci tools, this indicator dynamically updates as price action evolves, with full support for logarithmic scaling - essential for accurate analysis on long-term charts and high-growth assets. The indicator features a clean, modern aesthetic with customizable vibrant colors and text-only labels that won't clutter your chart, making it perfect for both intraday scalping and long-term position trading. Key Features ✅ Automatic Fibonacci Detection - Automatically finds the highest high and lowest low within your selected timeframe ✅ Manual Anchor Point - Click directly on the chart to set a custom low point for your Fibonacci analysis ✅ Logarithmic Scale Support - True logarithmic Fibonacci calculations for accurate levels on log-scale charts ✅ Flexible Display Modes - Show retracements only, extensions only, or both simultaneously ✅ Fully Customizable Levels - Adjust any Fibonacci level value, color, or toggle individual levels on/off ✅ Unified Color Mode - One-click option to change all levels to a single color (perfect for minimalist chart styles) ✅ Clean Modern Design - Text-only labels with vibrant colors and adjustable positioning ✅ 13 Default Levels - Includes 0.0, 0.236, 0.382, 0.5, 0.618, 0.786, 0.886, 1.0, 1.236, 1.414, 1.618, 2.0, and 2.618 How to Use Quick Start (Automatic Mode) Add the indicator to your chart By default, it will automatically find the lowest and highest points over the past 12 months Fibonacci levels will appear with clean colored text labels positioned to the right of current price Setting a Custom Anchor Point (Manual Mode) This is the most powerful feature - drawing from a specific swing low: Click the Settings icon (gear) on the indicator Navigate to Fibonacci Settings group Click inside the "Anchor Start Time" field - this will activate anchor selection mode Click directly on the candle where you want to set your swing low point on the chart The indicator will automatically: Lock that candle as your anchor (swing low) Find the highest high that occurred after your selected anchor point Draw Fibonacci retracement and extension levels between those two points Important: The anchor represents the starting point (0.0 level) of your Fibonacci, and the indicator finds the peak after that point as the 1.0 level. Display Modes Navigate to Display Settings → Display Mode to choose: Retracements & Extensions (default) - Shows all levels from 0.0 to 2.618 Retracements Only - Shows only 0.0 to 1.0 levels (great for identifying pullback entry zones) Extensions Only - Shows 1.0+ levels (useful for profit targets and breakout projections) Customizing Individual Levels Under Retracement Levels and Extension Levels groups, each level has three controls: Toggle checkbox - Show/hide the level Value field - Adjust the exact Fibonacci ratio (e.g., change 0.618 to 0.65 if desired) Color picker - Set unique colors for each level Unified Color Override Perfect for chart screenshots or minimalist aesthetics: Go to Unified Color Override settings group Enable "Use Unified Color for All Levels" Choose your color (defaults to gray) All lines and text immediately change to that color - individual settings are preserved when you toggle back off Line & Label Customization Display Settings group offers: Line Style: Solid, Dashed, or Dotted Line Length: Short (10 bars), Medium (50 bars), or Long (extends right infinitely) Line Width: 1-5 pixels Label Size: Tiny to Huge Label Offset: Adjust how many bars to the right labels appear (default: 12) Show Anchor Line: Display vertical lines at your swing low and swing high points Settings Overview Fibonacci Settings: Retracement Timeframe (default: 12M) Anchor Start Time (click to select candle) Use Log Scale Calculation (highly recommended for crypto and growth stocks) Display Settings: Display Mode (Retracements & Extensions / Retracements Only / Extensions Only) Line Style, Length, Width On-Chart Labels (clean text) or Price Scale Labels (traditional right-side axis) Label Size and Offset Unified Color Override: One-click monochrome mode for all levels Individual Level Controls: 8 customizable retracement levels (0.0 to 1.0) 5 customizable extension levels (1.236 to 2.618) Use Cases 📊 Swing Trading - Identify key support/resistance zones for entries and exits 📊 Scalping - Use short-term anchors to find precise intraday reversal levels 📊 Position Trading - Logarithmic calculations essential for multi-year crypto/stock analysis 📊 Options Trading - Extension levels provide excellent profit target zones 📊 Multi-Timeframe Analysis - Set different anchors to compare short-term vs. long-term Fibonacci structures Tips for Best Results For cryptocurrency and growth stocks: Always enable "Use Log Scale Calculation" and view your chart in log scale For precision: Use the manual anchor feature to draw from confirmed swing lows/highs rather than relying on automatic detection For clean charts: Toggle off levels you don't actively use (e.g., disable 0.786 and 0.886 if you only trade 0.382/0.618) For screenshots: Enable Unified Color Override and set to grayscale for professional-looking chart exports Note on Logarithmic Scale This indicator includes true logarithmic Fibonacci calculations, which are critical when analyzing assets with significant price appreciation. Standard arithmetic Fibonacci tools become increasingly inaccurate on log-scale charts - this indicator solves that problem by calculating levels using logarithmic mathematics when "Use Log Scale Calculation" is enabled. Disclaimer: This indicator is a tool for technical analysis and does not constitute financial advice. Always perform your own analysis and risk management before making trading decisions.
Chỉ báo Pine Script®
của SovereignCharts
Premium/Discount Zones with Confirmation Signals📌 Indicator Description: Premium/Discount Zones with Confirmed Signals This indicator identifies dynamic Premium, Discount, and Equilibrium zones based on recent swing highs and lows, helping traders visualize where price is considered expensive, cheap, or fair value. It’s designed for Smart Money Concepts (SMC), ICT-style trading, and anyone who values precision in zone-based analysis. 🔍 Key Features Swing-Based Zones: Automatically detects swing highs/lows over a customizable lookback period (default: 48 bars — equivalent to 2 days on a 1-hour chart). Premium & Discount Levels: Define overbought and oversold zones using percentage inputs (default: 25%). Equilibrium Band (middle): Highlights the no-trade value zone with adjustable width (default: 5%). Signal Engine: Generates trade signals based on two styles: Bounce: Reversal signals when price reacts to a zone and confirms direction. Breakout: Continuation signals when price breaks through a zone with momentum. Trade Type Selector: Choose between Bounce, Breakout, or Both from the input menu. Signal Filtering: Limits signals to one per direction at a time to reduce noise. Visual Styling: Toggle between colored or monochrome themes for clean charting. 🧠 How It Works Buy signals appear when price confirms strength from the discount zone or breaks above the premium zone. Sell signals appear when price confirms weakness from the premium zone or breaks below the discount zone. All signals include a built-in 3-bar confirmation delay to reduce false triggers. 🎯 Ideal For Traders using SMC, ICT, or price action strategies Zone-based scalping, swing trading, or intraday setups Visualizing market structure and value areas with clarity I hope you find this useful — and wish you Happy Trades!
Chỉ báo Pine Script®
của kostastrovas
Combined Fractal + MACD + Volume Alerts - Buy/SellOverview This TradingView indicator is designed to save traders hours of manual analysis by automatically combining three powerful market signals into a single alert system: Williams Fractals – identifies local highs and lows in the price structure. MACD Crosses – confirms momentum direction and potential trend changes. Volume Spike Detection – ensures signals occur with meaningful market participation. The indicator will generate buy and sell alerts only when all three conditions align (or within a short configurable window), allowing traders to focus on high-probability setups without monitoring multiple charts and indicators manually. Key Features ✅ Combined Alerts – Only triggers when Fractal, MACD, and Volume conditions are met. ✅ Early Alerts – Alerts fire as soon as the conditions occur, giving traders a head start for preparation and analysis. ✅ Optional Visuals – Plots buy/sell markers for testing and strategy verification; can be disabled for a cleaner chart. ✅ Flexible Settings – Users can adjust MACD parameters, volume multipliers, and Fractal ranges to suit their trading style. ✅ Timeframe Agnostic – Works on all timeframes; best on intraday and swing-trading charts. ✅ Non-Repainting Alerts – Ensures reliable signals without misleading historical adjustments. How It Works Fractals (Price Structure) The indicator detects local highs and lows (Williams Fractals) over a configurable range of bars. Fractals act as a support/resistance or trend turning point filter. MACD (Momentum Confirmation) Signals are validated with MACD line and Signal line crosses. Optional conditions: only alert when MACD crosses above zero for a bullish trend or below zero for a bearish trend. Volume (Participation Check) The indicator ensures that any signal occurs with above-average volume, filtering weak or low-confidence signals. Volume threshold is configurable via a multiplier relative to the average over a selected period. Combined Logic Buy Alert: Triggered when a bullish Fractal is formed and MACD crosses up and volume spike occurs. Sell Alert: Triggered when a bearish Fractal is formed and MACD crosses down and volume spike occurs. Optionally, the conditions can fire within 3 candles of each other, giving some flexibility for real-market timing. Benefits for Traders Saves Time: No need to manually watch multiple indicators. High-Probability Alerts: Combines trend, structure, and volume for robust signals. Customizable: Adapt to your trading style, instrument, or timeframe. Testing & Validation: Optional visuals allow backtesting before relying solely on alerts. Alerts Anywhere: Works on all tickers and chart timeframes supported by TradingView. How to Use Apply the indicator to your TradingView chart. Configure settings: Fractal Left/Right range (default: 2 bars). MACD Fast/Slow/Signal lengths. Volume multiplier to define “spike.” Optional: enable/disable visuals for testing. Set up TradingView alerts using the indicator’s prebuilt alert conditions. Use the alerts as early heads-up for potential trades; validate with your strategy rules or confluences. Tips for Traders Start with defaults: Test on a few symbols and intraday charts first. Adjust volume multiplier: Avoid too many alerts on low-volume symbols. Backtest visually: Enable markers to verify signals against historical price action. Combine with your workflow: Use alerts to prioritize charts rather than trade blindly. Conclusion This Combined Fractal + MACD + Volume Alerts Indicator is ideal for traders who want to automate the detection of high-probability setups while maintaining flexibility and control. It streamlines decision-making by combining price structure, momentum, and market participation into a single, actionable alert system. Whether you are a day trader, swing trader, or part-time trader, this indicator saves time, reduces noise, and helps focus on the most promising trading opportunities.
Chỉ báo Pine Script®
của arupnj2018
Camarilla Pivot Plays (Lite) [BruzX]█ OVERVIEW This indicator implements the Camarilla Pivot Points levels and a system for suggesting particular plays. It only 3rd, 4th, and 6th levels, as these are the only ones used by the system. It also optionally shows the Central Pivot Range, which is in fact between S2 and R2. In total, there are 12 possible plays, grouped into two groups of six. The algorithm evaluates in real-time which plays fulfil their precondition and shows the candidate plays. The user must then decide if and when to take the play. █ CREDITS The Camarilla pivot plays are defined in a strategy developed by Thor Young, and the whole system is explained in his book "A Complete Day Trading System". This description is self-sufficient for effective use. █ FEATURES Display the 3rd, 4th and 6th Camarilla pivot levels Works for stocks, futures, indices, forex and crypto Automatically switches between RTH and ETH data based on criteria defined by the system. Option to force RTH/ETH data and force a close price to be used in the calculation. Preconditions for the plays can be toggled on/off Works correctly on both RTH and ETH charts Well-documented options tooltips Well-documented and high-quality open-source code for those who are interested █ HOW TO USE The defaults work well; at a minimum, just add the indicator and watch the plays being called. For US futures, you will probably want to chat the "Timezone for sessions" to New York and the regular session times to 09:30 - 16:00. The following diagram shows its key features. By default, the indicator draws plays 1 days back; this can be changed up to 20 days. The labels can be shifted left/right using the "label offset" option to avoid overlapping with other labels in this indicator or those of another indicator. An information box at the top-right of the chart shows: The data currently in use for the main pivots. This can switch in the pre-market if the H/L range exceeds the previous day's H/L, and if it does, you will see that switch at the time that it happens Whether the current day's pivots are in a higher or lower range compared to the previous day's. The width of the pivots compared to the previous day The current candidate plays fulfilling preconditions. You then need to watch the price action to decide whether to take the play. The resistance pivots are all drawn in the same colour (red by default), as are the support pivots (green by default). You can change the resistance and support colours, but it is not possible to have different colours for different levels of the same kind. █ CONCEPTS The indicator is focused around daily Camarilla pivots and evaluates the preconditions for 12 possible plays: 6 when in a higher range, 6 when in a lower range. The plays are labelled by two letters—the first indicates the range, the second indicates the play—as shown in this diagram: The pivots can be calculated using only RTH (Regular Trading Hours) data, or ETH (Extended Trading Hours) data, which includes the pre-market and post-market. The indicator implements logic to automatically choose the correct data, based on the rules defined by the strategy. This is user-overridable. With the default options, ETH will be used when the H/L range in the previous day's post-market or current day's pre-market exceeds that of the previous day's regular market. In auto mode, the chosen pivots are considered the main pivots for that day and are the ones used for play evaluation. The "other" pivots can also be shown—"other" here meaning using ETH data when the main pivots use RTH data, and vice versa. The plays must fulfil a set of preconditions. There are preconditions for valid region and range, price sweeps into levels, correct pivot width, opening position, price action, and whether neutral range plays and premarket plays are enabled. When all the preconditions are fulfilled, the play will be shown as a candidate. █ NOTE FOR FUTURES Futures don't officially have a pre-market or post-market like equities. Let's take ES on CME as an example. It trades from 18:00 ET Sunday to 17:00 Friday (ET), with a daily pause between 17:00 and 18:00 ET. However, most of the trading activity is done between 09:30 and 16:00, which you can tell from the volume spikes at those times, and this coincides with NYSE/NASDAQ regular hours. So we define a pseudo-pre-market from 18:00 the previous day to 09:30 on the current day, then a pseudo-regular market from 08:30 to 16:00, then a pseudo-post-market from 16:00 to 17:00. The indicator then works exactly the same as with equities—all the options behave the same, just with different session times defined for the pre-, regular, and post-market, with "RTH" meaning just the regular market and "ETH" meaning all three. █ LIMITATIONS The pivots are very close to those shown in DAS Trader Pro. They are not to-the-cent exact, but within a few cents. The reasons are: TradingView provides free real-time data from CBOE One, not full exchange data (you can pay for this though, and it's not expensive), and the close/high/low are taken from the intraday timeframe you are currently viewing, not daily data—which are very close, but often not exactly the same. For example, the high on the daily timeframe may differ slightly from the daily high you'll see on an intraday timeframe. Despite these caveats, occasionally large spikes will be seem in one platform and not the other (even with paid data), or the spikes will reach significantly difference prices. Where these spikes create the daily high or low, this can cause significantly different pivots levels. The more traded the stock is, the less the difference tends to be. Highly traded stocks are usually within a few cents (but even they occasionally have large differences in spikes). There is nothing that can be done about this. The 6th Camarilla level does not have a standard definition and may not match the level shown on other platforms. It does match the definition used by DAS Trader Pro. Replay mode for stocks does not work correctly. This is due to some important Pine Script variables provided by the TradingView platform and used by the script not being assigned correct values in replay mode. Futures do not use these variables, so they should work in replay mode. The indicator is an intraday indicator (despite also being able to show weekly and monthly pivots on an intraday chart). It deactivates on a daily timeframe and higher. Sub-minute timeframes are also not supported. The indicator was developed and tested for US/European stocks, US futures and EURUSD forex and BTCUSD. It should work as intended for stocks and futures in different countries, and for all forex and crypto, but this is tested as much as the security it was developed for. █ DISCLAIMER This indicator is provided for information only and should not be used in isolation without a good understand of the system and without considering other factors. You should not take trades using real money based solely on what this indicator says. Any trades you take are entirely at your own risk.
Chỉ báo Pine Script®
của BruzX
16