Bắt đầu

Trading!

BOS Zones (Order Blocks) [VCAI]BOS Zones (Order Blocks) BOS Zones (Order Blocks) is a market-structure visualiser that highlights Breaks of Structure (BOS) and automatically marks the price zones formed immediately before the break. Instead of guessing where structure changed or manually drawing zones, this indicator does the work for you and keeps the chart clean. What This Indicator Does • Detects bullish and bearish Breaks of Structure • Identifies the last opposing candle before the break • Draws a clear zone (order-block style) from that candle • Projects the zone forward for future interaction • Optionally shows midlines for refined price reference How to Read It • Bullish BOS When price breaks above a prior swing high, the indicator marks the last bearish candle before the break and draws a bullish zone. • Bearish BOS When price breaks below a prior swing low, the indicator marks the last bullish candle before the break and draws a bearish zone. These zones often act as areas of interest where price may react, stall, or reverse. Why This Is Useful Most traders: miss structure shifts draw zones inconsistently clutter charts with too many lines BOS Zones gives you: • Objective structure breaks • Consistent zone placement • Clean, readable visuals • Fewer decisions, less noise Customisation Options • Control swing sensitivity • Limit how many zones are displayed • Toggle boxes, midlines, and markers • Automatically clean old zones Inputs are intentionally limited to avoid over-optimisation. What This Indicator Is NOT • No buy or sell signals • No trade automation • No prediction or future-looking logic This is a structure and context tool, designed to support discretionary analysis. Best Use Cases • Market structure analysis • Supply & demand / order block trading • Confluence with trend tools • Higher-timeframe bias mapping Works across Crypto, Forex, Indices, and Commodities. Final Note This indicator does not repaint structure breaks once confirmed. All zones are derived from historical price action only.
Chỉ báo Pine Script®
của Vectorcoresai
Dimensional Support ResistanceDimensional Support Resistance Overview Dimensional Support Resistance is an open-source overlay indicator that automatically detects and displays clean, non-overlapping support and resistance levels using pivot-based analysis with intelligent filtering. It identifies significant swing highs and lows, filters them by minimum distance to prevent visual clutter, and provides volume-confirmed bounce signals. What This Indicator Does The indicator calculates and displays: Dynamic Pivot Levels - Automatically detected swing highs and lows based on configurable pivot strength Distance Filtering - Ensures levels are spaced apart by a minimum percentage to prevent overlap S/R Zones - Visual zones around each level showing the price area of significance Bounce Detection - Identifies when price reverses at support or resistance levels Volume Confirmation - Strong signals require above-average volume for confirmation How It Works Pivot detection scans for swing highs and lows using a configurable strength parameter. A pivot low requires the low to be lower than all surrounding bars within the strength period. Signal Generation The indicator generates bounce signals using TradingView's built-in pivot detection combined with candle reversal confirmation: Support Bounce: Pivot low forms with bullish close (close > open) Resistance Bounce: Pivot high forms with bearish close (close < open) Strong Bounce: Bounce occurs with volume 1.5x above 20-period average A cooldown period of 15 bars prevents signal spam. Dashboard Panel A compact dashboard displays: Support - Count of active support levels Resistance - Count of active resistance levels Dashboard position is configurable (Top Left, Top Right, Bottom Left, Bottom Right). Visual Elements Support Lines - Green horizontal lines at support levels Resistance Lines - Red horizontal lines at resistance levels S/R Zones - Semi-transparent boxes around levels showing zone width Price Labels - S: and R: labels showing exact price of nearest levels BOUNCE Markers - Triangle shapes with text when price bounces at a level STRONG Markers - Label shapes when bounce occurs with high volume Input Parameters Lookback Period (default: 100) - Historical bars to scan for pivots Pivot Strength (default: 8) - Bars on each side required for valid pivot (higher = fewer but stronger levels) Max Levels Each Side (default: 2) - Maximum support and resistance levels displayed Zone Width % (default: 0.15) - Width of zones around each level as percentage of price Min Distance Between Levels % (default: 1.0) - Minimum spacing between levels to prevent overlap Show S/R Zones (default: true) - Toggle zone visualization Show Bounce Signals (default: true) - Toggle signal markers Support Color (default: #00ff88) - Color for support elements Resistance Color (default: #ff3366) - Color for resistance elements Suggested Use Cases Identify key support and resistance levels for entry and exit planning Use bounce signals as potential reversal confirmation Combine with other indicators for confluence-based trading decisions Monitor strong signals for high-probability setups with volume confirmation Timeframe Recommendations Works on all timeframes. Higher timeframes (4H, Daily) provide more significant levels with fewer signals. Lower timeframes show more granular structure but may produce more noise. Limitations Pivot detection requires lookback bars, so very recent pivots may not be immediately visible Bounce signals are based on pivot formation and may lag by the pivot strength period Levels are recalculated on each bar, so they may shift as new pivots form Open-Source and Disclaimer This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management and conduct your own analysis before trading. - Made with passion by officialjackofalltrades
Chỉ báo Pine Script®
của officialjackofalltrades
32
Yearly Projection ExplorerThis indicator helps you understand how the current market period has behaved historically by overlaying the same date window from previous years and projecting it forward from today’s price. The script works the following way: Aligns past years to today’s calendar date Normalizes all paths to the last close at the start Projects historical performance X bars forward Displays each year as a separate performance path Calculates and plots the mean (average) projection for quick reference 🔧 How It Works Number of Years: choose how many past years to include (e.g. last 10, 20, or 25 years) Projection Length: choose how many bars (days) ahead to project Each line shows how the market moved during the same period in a specific year Labels show the year and total return at the projection end The mean line highlights the average historical outcome 🧠 Why This Is Useful Identify seasonal tendencies Compare current price action to historical analogs Visualize best / worst historical outcomes Set realistic expectations for short-term moves Add context to discretionary or systematic decisions This tool does not predict the future, but it provides a powerful historical framework to assess what has been typical, rare, or extreme for the current market window. ⚠️ Notes Script works on timenow variable for now, and you might see unexpected periods if today is a day off. Results depend on the selected timeframe and instrument Past performance is not a guarantee of future results Designed for analysis and context, not standalone signals
Chỉ báo Pine Script®
của QuantNomad
SnR Fresh & Unfresh Level Detector by RWBTradeLabSnR Fresh & Unfresh Level Detector by RWBTradeLab A clean, non-repainting Support/Resistance level tracker built for price action traders who want to see which levels are still “Fresh” vs “Unfresh” — based strictly on CLOSED candle behavior with breakout and rejection state changes + alerts. What this indicator does This script detects 4 SnR level types from 2-candle sequences (CLOSED candles only), then continuously updates each level’s status as Fresh ↔ Unfresh depending on market interaction. Level Creation All levels are created using 2 CLOSED candles only (no running candle logic): A Level Green → Red Level = 1st Green candle Close V Level Red → Green Level = 1st Red candle Close Bullish Gap Level Green → Green Level = 1st Green candle Close Bearish Gap Level Red → Red Level = 1st Red candle Close When a level is created, it starts as: Fresh Fresh vs Unfresh Logic (Dynamic, continuous process) This indicator continuously updates the SAME level over time: Fresh → Unfresh (Rejection) A level becomes Unfresh when a candle touches the level (wick touch) but closes back on the opposite side (rejection confirmed). Unfresh → Fresh (Breakout) A level becomes Fresh again when a candle closes through the level (confirmed breakout). ✅ This means a level can change state multiple times: Fresh → Unfresh → Fresh → Unfresh … (based on confirmed candle behavior) Visuals on chart Each detected level is drawn as a horizontal Ray extended to the right. Labels are drawn in a clean centered-box style: * Fresh Level label = Green background + White text * Unfresh Level label = Red background + White text Labels are placed at the start (creation candle) of the level, not in the middle. Labels are automatically positioned above/below based on level type: * A Level / Bearish Gap labels above * V Level / Bullish Gap labels below Alerts (bar-close only) Built-in alerts trigger only on CONFIRMED candles: * Fresh Created (new level created) * Fresh → Unfresh (rejection confirmed) * Unfresh → Fresh (breakout confirmed) No repainting, no running-bar alerts. Key settings Candle Length (Closed bars only): Scans and keeps levels created within the last N closed candles (running candle excluded). Default: 20 (Min 5 / Max 100) Show Fresh Levels: On/Off Show Unfresh Levels: On/Off Show Text Labels: On/Off Label Offset (ticks): Adjust label distance for a cleaner chart Max Levels To Keep: Performance safety cap to prevent excessive objects Non-repainting confirmation All levels, state changes, and alerts are calculated on confirmed bars only. No repainting, no running-bar signals. Best use Works on any market and timeframe. For higher reliability, combine with: Higher timeframe structure Supply & Demand zones Trend context and liquidity sweeps Confirmation candles around key levels Disclaimer This indicator is a level-detection and state-tracking tool, not financial advice. Trading involves risk; always use proper risk management and confirm levels with your own analysis. Creator: RWBTradeLab If you find this useful, please leave a like ⭐ and share your feedback.
Chỉ báo Pine Script®
của RWBTradeLab
Pivot Point Zones [JOAT]Pivot Point Zones — Multi-Formula Pivot Levels with ATR Zones Pivot Point Zones calculates and displays traditional pivot points with five formula options, enhanced with ATR-based zones around each level. This creates more practical trading zones that account for price noise around key levels—because price rarely reacts at exact mathematical levels. What Makes This Indicator Unique Unlike basic pivot point indicators, Pivot Point Zones: Offers five different pivot calculation formulas in one indicator Creates ATR-based zones around each level for realistic reaction areas Pulls data from higher timeframes automatically Displays clean labels with exact price values Provides a comprehensive dashboard with all levels What This Indicator Does Calculates pivot points using Standard, Fibonacci, Camarilla, Woodie, and more formulas Draws horizontal lines at Pivot, R1-R3, and S1-S3 levels Creates ATR-based zones around each level for realistic price reaction areas Displays labels with exact price values Updates automatically based on higher timeframe closes Provides fills between zone boundaries for visual clarity Pivot Formulas Explained // Standard Pivot - Classic (H+L+C)/3 calculation pp := (pivotHigh + pivotLow + pivotClose) / 3 r1 := 2 * pp - pivotLow s1 := 2 * pp - pivotHigh r2 := pp + pivotRange s2 := pp - pivotRange // Fibonacci Pivot - Uses Fib ratios for level spacing r1 := pp + 0.382 * pivotRange r2 := pp + 0.618 * pivotRange r3 := pp + 1.0 * pivotRange // Camarilla Pivot - Tighter levels for intraday r1 := pivotClose + pivotRange * 1.1 / 12 r2 := pivotClose + pivotRange * 1.1 / 6 r3 := pivotClose + pivotRange * 1.1 / 4 // Woodie Pivot - Weights current close more heavily pp := (pivotHigh + pivotLow + 2 * close) / 4 // TD Pivot - Conditional based on open/close relationship x = pivotClose < pivotOpen ? pivotHigh + 2*pivotLow + pivotClose : pivotClose > pivotOpen ? 2*pivotHigh + pivotLow + pivotClose : pivotHigh + pivotLow + 2*pivotClose pp := x / 4 Formula Characteristics Standard — Classic pivot calculation. Balanced levels, good for swing trading. Fibonacci — Uses 0.382, 0.618, and 1.0 ratios. Popular with Fibonacci traders. Camarilla — Tighter levels derived from range. Excellent for intraday mean-reversion. Woodie — Weights current close more heavily. More responsive to recent price action. TD — Conditional calculation based on open/close relationship. Adapts to bar type. Zone System Each pivot level includes an ATR-based zone that provides a more realistic area for potential price reactions: // ATR-based zone width calculation float atr = ta.atr(atrLength) float zoneHalf = atr * zoneWidth / 2 // Zone boundaries around each level zoneUpper = level + zoneHalf zoneLower = level - zoneHalf This accounts for market noise and helps avoid false breakout signals at exact level prices. Visual Features Pivot Lines — Horizontal lines at each calculated level Zone Fills — Transparent fills between zone boundaries Level Labels — Labels showing level name and exact price (e.g., "PP 45123.50") Color Coding : - Yellow: Pivot Point (PP) - Red gradient: Resistance levels (R1, R2, R3) - darker = further from PP - Green gradient: Support levels (S1, S2, S3) - darker = further from PP Color Scheme Pivot Color — Default: #FFEB3B (yellow) — Central pivot point Resistance Color — Default: #FF5252 (red) — R1, R2, R3 levels Support Color — Default: #4CAF50 (green) — S1, S2, S3 levels Zone Transparency — 85-90% transparent fills around levels Dashboard Information The on-chart table (bottom-right corner) displays: Selected pivot type (Standard, Fibonacci, etc.) R3, R2, R1 resistance levels with exact prices PP (Pivot Point) highlighted S1, S2, S3 support levels with exact prices Inputs Overview Pivot Settings: Pivot Type — Formula selection (Standard, Fibonacci, Camarilla, Woodie, TD) Pivot Timeframe — Higher timeframe for OHLC data (default: D = Daily) ATR Length — Period for zone width calculation (default: 14) Zone Width — ATR multiplier for zone size (default: 0.5) Level Display: Show Pivot (P) — Toggle central pivot line Show R1/S1 — Toggle first resistance/support levels Show R2/S2 — Toggle second resistance/support levels Show R3/S3 — Toggle third resistance/support levels Show Zones — Toggle ATR-based zone fills Show Labels — Toggle price labels at each level Visual Settings: Pivot/Resistance/Support Colors — Customizable color scheme Line Width — Thickness of level lines (default: 2) Extend Lines Right — Project lines forward on chart Show Dashboard — Toggle the information table How to Use It For Intraday Trading: Use Daily pivots on intraday charts (15m, 1H) Pivot point often acts as the day's "fair value" reference Camarilla levels work well for intraday mean-reversion R1/S1 are the most commonly tested levels For Swing Trading: Use Weekly pivots on daily charts Standard or Fibonacci formulas work well R2/S2 and R3/S3 become more relevant Zone boundaries provide realistic entry/exit areas For Support/Resistance: R levels above price act as resistance targets S levels below price act as support targets Zone boundaries are more realistic than exact lines Multiple formula confluence adds significance Alerts Available DPZ Cross Above Pivot — Price crosses above central pivot DPZ Cross Below Pivot — Price crosses below central pivot DPZ Cross Above R1/R2 — Price breaks resistance levels DPZ Cross Below S1/S2 — Price breaks support levels Best Practices Match pivot timeframe to your trading style (Daily for intraday, Weekly for swing) Use zones instead of exact levels for more realistic expectations Camarilla is best for mean-reversion; Standard/Fibonacci for breakouts Combine with other indicators for confirmation — Made with passion by officialjackofalltrades
Chỉ báo Pine Script®
của officialjackofalltrades
Fractal Support & Resistance [JOAT] Fractal Support & Resistance — Automatic Level Detection with Volume Weighting Fractal Support & Resistance automatically identifies key price levels using a proprietary combination of fractal detection, volume analysis, and dynamic touch counting. Levels are intelligently styled based on their strength and how many times they have been tested, giving you instant visual feedback on level importance. Why This Script is Protected This script is published as closed-source to protect the proprietary level management algorithm and the unique volume-weighted strength calculation methodology from unauthorized republishing. The specific implementation of touch detection, level merging logic, and dynamic opacity calculations represents original work that differentiates this from standard fractal indicators. What Makes This Indicator Unique Unlike basic fractal indicators that simply mark pivot points, this system: Tracks how many times each level has been tested (touch counting) Weights level importance by volume at the fractal point Merges nearby fractals into single levels instead of cluttering the chart Dynamically adjusts visual opacity based on level strength Provides zone boxes around levels for realistic price reaction areas What This Indicator Does Detects fractal pivot highs and lows to establish support and resistance levels Tracks how many times each level has been touched or tested Weights level importance by volume at the fractal point Draws extending lines and zone boxes for each level Dynamically adjusts level opacity based on touch count for visual strength indication Provides a dashboard with nearest levels and counts Core Methodology The indicator uses Williams Fractal concepts as a foundation but extends them with proprietary enhancements: Fractal Detection — Identifies pivot highs and lows where price creates local extremes with confirmation bars on each side. A fractal high requires the highest point with lower highs on both sides; a fractal low requires the lowest point with higher lows on both sides. Level Clustering — New fractals within a tolerance zone (based on Zone Padding %) update existing levels rather than creating duplicates. This keeps the chart clean and focuses on significant price areas. Volume Integration — Volume at each fractal point is accumulated to weight level significance. Higher volume fractals are considered more important. Touch Tracking — The system monitors when price approaches existing levels and increments touch counts. More touches indicate stronger, more significant levels. Visual Strength System Level appearance changes dynamically based on market interaction: Newer or less-tested levels appear more transparent (up to 80% transparency) Each additional touch reduces transparency by 15% Heavily tested levels become more prominent and opaque (minimum 20% transparency) Labels display level number and touch count (e.g., "R1 (3)" = Resistance 1 with 3 touches) Zone boxes provide visual areas around each level Color Scheme Resistance Color — Default: #FF5252 (red) — Used for resistance levels and zones Support Color — Default: #4CAF50 (green) — Used for support levels and zones Zone Fill — 90% transparent version of level color Zone Border — 70% transparent version of level color Labels — 30% transparent background with white text Dashboard Information The on-chart table (bottom-left corner) displays: Number of active resistance levels meeting minimum touch requirement Number of active support levels meeting minimum touch requirement Nearest resistance level above current price Nearest support level below current price Inputs Overview Fractal Settings: Fractal Period — Bars on each side for fractal confirmation (default: 2, range: 1-10) Max Levels Per Side — Maximum resistance and support levels to track (default: 5, range: 1-20) Zone Padding (%) — Level zone width as percentage of price (default: 0.2%, range: 0-2%) Filtering: Volume Weight Levels — Toggle volume-weighted level importance (default: on) Min Touches to Show — Filter out levels with fewer touches (default: 1, range: 1-10) Lookback Period — Historical bars to analyze for level detection (default: 200, range: 50-500) Visual Settings: Resistance/Support Colors — Customizable color scheme Show Zone Boxes — Toggle filled zone areas around levels Show Level Labels — Toggle level labels with touch counts Show Fractal Markers — Toggle small triangles at fractal points Show Dashboard — Toggle the information table Line Width — Thickness of level lines (default: 2, range: 1-5) How to Use It For Support/Resistance Trading: Use levels with higher touch counts as stronger support/resistance references More opaque levels have been tested more times and are more significant Watch for price reactions at zone boundaries, not just exact level prices Combine with candlestick patterns at levels for entry signals For Breakout Trading: Watch for breakouts when price closes beyond a level Levels with many touches that finally break often produce strong moves Use the zone box—a close beyond the zone is more significant than just touching the level Set alerts for resistance/support breaks For Target Setting: Use the nearest resistance as a profit target for long positions Use the nearest support as a profit target for short positions Dashboard shows these levels for quick reference Alerts Available FSR Resistance Break — Price closes above a resistance level FSR Support Break — Price closes below a support level FSR New Fractal High — Fresh fractal high detected FSR New Fractal Low — Fresh fractal low detected Best Practices Increase Fractal Period for fewer but more significant levels Use Min Touches filter to show only well-tested levels Volume weighting helps identify institutionally significant levels Combine with trend indicators—trade with the trend at levels This indicator is provided for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always conduct your own analysis and use proper risk management before making trading decisions. — Made with passion by officialjackofalltrades
Chỉ báo Pine Script®
của officialjackofalltrades
Neural Trend Engine [JOAT]Neural Trend Engine - Multi-Layer Adaptive Trend Detection Neural Trend Engine uses a multi-layer filtering approach inspired by neural network concepts. It combines multiple adaptive moving averages with proprietary momentum and volatility weighting to generate trend signals with reduced lag and improved confidence scoring. Why This Script is Protected This script is published as closed-source to protect the proprietary signal composition algorithm and the specific weighting methodology from unauthorized republishing. The unique combination of adaptive layer calculations, momentum normalization, and volatility integration represents original work that goes beyond standard indicator implementations. What Makes This Indicator Unique Unlike simple moving average crossover systems, Neural Trend Engine: Uses three Kaufman Adaptive Moving Averages (KAMA) that automatically adjust their smoothing based on market efficiency Combines layer alignment, momentum, and volatility into a single "neural signal" Provides signal strength percentages so you know the conviction level of each signal Creates a visual trend cloud that makes direction immediately obvious What This Indicator Does Plots three adaptive moving average "layers" that respond dynamically to market efficiency Creates a trend cloud between fast and slow layers for visual trend identification Generates weighted composite signals from layer alignment, momentum, and volatility Displays buy/sell labels with signal strength percentages Provides a comprehensive dashboard with multi-component breakdown Colors the neural line and cloud based on current trend direction Core Methodology The indicator employs a three-layer adaptive system where each layer responds to market conditions at different speeds: Fast Layer (default: 8) — Quick response for short-term direction changes Medium Layer (default: 21) — Intermediate trend reference Slow Layer (default: 55) — Long-term trend anchor Each layer uses efficiency-based adaptation, meaning they become more responsive during trending conditions and smoother during choppy markets. The neural signal is a proprietary composite that weighs three distinct market components: Momentum Component (default: 40%) — Measures directional price velocity, normalized to its recent range Trend Component (default: 35%) — Evaluates alignment between the three adaptive layers Volatility Component (default: 25%) — Incorporates market volatility state into signal generation These components are combined using a weighted formula that has been calibrated to balance responsiveness with noise reduction. Signal Generation Direction changes occur when the smoothed neural signal crosses a configurable strength threshold: Bullish — Signal exceeds positive threshold with layer alignment confirmation Bearish — Signal drops below negative threshold with layer alignment confirmation Neutral — Signal remains within threshold range, indicating consolidation Signal strength percentages indicate the conviction level of each signal, helping traders assess trade quality. Higher percentages suggest stronger trend conviction. Visual Features Trend Cloud — Filled area between fast and slow layers, colored by trend direction Neural Line with Glow — Weighted average of all three layers with glow effect Medium Layer — Subtle white line showing intermediate trend Signal Labels — BUY/SELL labels with strength percentages at signal points Small Markers — Alternative triangle markers when labels are disabled Color Scheme Bullish Color — Default: #26A69A (teal green) — Used for bullish trends and signals Bearish Color — Default: #EF5350 (red) — Used for bearish trends and signals Cloud Fill — 85% transparent version of trend color Neural Line Glow — 60% transparent version for glow effect Dashboard Information The on-chart table (top-right corner) displays: Current direction (BULLISH, BEARISH, or NEUTRAL) Neural signal percentage Layer alignment status (ALIGNED UP, ALIGNED DOWN, or MIXED) Momentum direction and percentage Trend strength percentage Inputs Overview Neural Layers: Fast Layer — Period for fast adaptive MA (default: 8, range: 2-50) Medium Layer — Period for medium adaptive MA (default: 21, range: 5-100) Slow Layer — Period for slow adaptive MA (default: 55, range: 10-200) Source — Price source for calculations (default: close) Sensitivity: Momentum Weight — Weight for momentum component (default: 0.4) Trend Weight — Weight for trend/layer alignment (default: 0.35) Volatility Weight — Weight for volatility component (default: 0.25) ATR Period — Period for volatility calculations (default: 14) Visual Settings: Bullish/Bearish Colors — Customizable color scheme Show Trend Cloud — Toggle the filled cloud area Show Signal Labels — Toggle BUY/SELL labels with percentages Show Neural Line — Toggle the main trend line Show Dashboard — Toggle the information table Alerts: Await Bar Confirmation — Wait for bar close before triggering (recommended) Min Signal Strength — Threshold for direction changes (default: 0.3 = 30%) How to Use It For Trend Following: Follow the trend cloud color for overall market direction Enter long when cloud turns bullish (teal) and signal strength is high Enter short when cloud turns bearish (red) and signal strength is high Use the neural line as a trailing stop reference For Signal Trading: Wait for BUY/SELL labels to appear Check the signal strength percentage—higher is better Confirm with dashboard showing aligned layers Avoid signals during MIXED layer alignment For Confirmation: Use Neural Trend Engine to confirm signals from other systems Strong confirmation when all three layers are aligned Dashboard shows momentum and trend strength for additional context Alerts Available NTE Buy Signal — Bullish direction change detected NTE Sell Signal — Bearish direction change detected NTE Direction Change — Any trend direction change Best Practices Higher signal strength percentages indicate more reliable signals Wait for layer alignment (shown in dashboard) before entering trades Use on higher timeframes for more reliable trend identification Combine with support/resistance levels for entry timing This indicator is provided for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always conduct your own analysis and use proper risk management before making trading decisions. — Made with passion by officialjackofalltrades
Chỉ báo Pine Script®
của officialjackofalltrades
VORB DJB Trades V1VORB by DJB Trades (Version 1) is a complete intraday framework built around the New York session Opening Range Breakout (ORB), combined with higher-timeframe VWAPs and precise Fair Value Gap mapping. This tool is designed to give you context, levels and confluence at a glance – no more stacking 5 different indicators on your chart. 🔶 Core ORB Logic (NY Session) • Uses the 09:30–09:45 NY time 15-minute ORB range. • Draws an ORB box from high to low during the ORB window. • Projects clean high/low ORB lines across the session (up to your chosen end time, default 18:00 NY). • Displays the ORB size in points above the box • 1 point = 4 ticks (futures-style logic). This gives an instant sense of how “wide” or “tight” the opening drive was, and how much room you have for trend or mean-reversion plays. 📐 Daily VWAP (Intraday Bias) • Custom anchor time (default 18:00, NY session close style). • Plots Daily VWAP plus +/-1 standard deviation bands. • Full styling controls: colors, line widths, band fill etc. • You can limit visibility to specific timeframes via dropdown (e.g. only show on 1–5m, or just intraday). VWAP +/-1 deviation bands gives you intraday bias and “fair value” zones to frame trades around the ORB. 🕒 Higher Timeframe VWAPs (Weekly, Monthly, Yearly) All three higher-TF VWAPs are calculated the same way (volume-weighted, streaming) but anchored at different structural points: • Weekly VWAP – resets at the start of each week • Monthly VWAP – resets at the start of each month • Yearly VWAP – resets at the start of each year Each has: • Main VWAP line • ±/-1 standard deviation bands • Independent color / width / band fill settings • Timeframe visibility controls (“show from TF” & “show up to TF”) so you can do things like: ⁃ Weekly VWAP only from 5m and above ⁃ Monthly on 1h and higher ⁃ Yearly only on Daily/Weekly/Monthly Use these as higher-timeframe bias references and key dynamic value areas above/below the ORB. 📊 1m FVGs (Outside ORB & VWAP Bands) For precision entries: • Detects 1-minute Fair Value Gaps (classic 3-candle pattern): ⁃ Bullish FVG: low > high ⁃ Bearish FVG: high < low • Only plots FVGs that are: ⁃ Outside the ORB range, and ⁃ Outside the Daily VWAP +/-1 bands • FVG boxes are auto-extended to the right (4× original width) for clear “liquidity pockets”. • Separate colors for bullish and bearish FVGs. This helps you focus only on “clean” imbalances away from the opening chop and mid-range value. ⚙️ Customisation & Use • Works best on US indices, FX and futures during the NY session. • Optimised for 1m–15m ORB trading, but higher-TF VWAPs shine on 5m, 15m, 1h and Daily. • Every visual element (ORB box, lines, VWAPs, bands, FVGs, label text/bg) is fully customisable in the settings. ⚠️ Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice or a signal service. Always test on a demo account and use your own risk management before trading live.
Chỉ báo Pine Script®
của DJB_Trading
ORACLE v13: The Gamified Market HUDORACLE v13 is not just an indicator; it is a complete Trading HUD (Heads-Up Display) that translates complex market data into an intuitive, video-game-style interface. It turns abstract concepts like "volatility" and "support/resistance" into actionable game mechanics, allowing you to react faster and trade smarter. ⚔️ Key Features: 🛡️ Boss & Shield Mechanics (Support/Resistance): Automatic detection of key levels visualized as "Bosses" (Resistance) and "Shields" (Support). HP System: Watch price "damage" these levels in real-time. When "Boss HP" hits zero, a breakout is imminent. 🔮 The Bestiary (Market Conditions): Instantly identifies the "Enemy Type" you are fighting: 🟢 SLIME: Squeeze zone (low volatility, prepare for a move). 👺 GOBLIN: Chop/Noise (high risk, avoid trading). 🐉 DRAGON: Strong Trend (ride the momentum). 👹 BERSERKER: Extreme Volatility (proceed with caution). 📈 Live Structure Mapping: Real-time ZigZag overlays with automatic HH/LL/LH/HL labels. Breakout Flash: Candles flash WHITE instantly when major structure or Boss levels are broken. 🎮 Combat Stats: Combo Counter: Tracks consecutive directional candles. Aggro Meter: Visualizes volume intensity. Loot Drop Rate: innovative metric calculating the probability of a profitable move based on current ATR. Momentum Bar: RPG-style health bar for trend strength. Why use ORACLE? Most indicators just draw lines. ORACLE gives you Context. It tells you exactly what kind of market environment you are in so you never bring a knife to a Dragon fight. Perfect for scalpers and day traders who need instant situational awareness. Settings: Fully customizable Lookback periods, ZigZag sensitivity, and Visual Themes.
Chỉ báo Pine Script®
của O_A_O
6
Iridescent Liquidity Prism [JOAT]Iridescent Liquidity Prism | Peer Momentum HUD A multi-layered order-flow indicator that combines microstructure analysis, smart-money footprint detection, and intermarket momentum signals. The script uses dynamic color-shifting themes to visualize liquidity patterns, structure, and peer momentum data directly on the chart. There is so much to choose from inside the settings, if you think it's a mess on the chart it's because you have to personally customize it based on your needs... Core Functionality The indicator calculates and displays several analytical layers simultaneously: Order-Flow Imbalance (OFI): Calculates buy vs. sell volume pressure using volume-weighted price distribution within each bar. Uses an EMA filter (default: 55 periods) to smooth the signal. Values are normalized using standard deviation to identify significant imbalances. Smart Money Footprints: Detects accumulation and distribution zones by comparing volume rate of change (ROC) against price ROC. When volume ROC exceeds a threshold (default: 65%) and price ROC is positive, accumulation is detected. When volume ROC is high but price ROC is negative, distribution is detected. Fractal Structure Mapping: Identifies pivot highs and lows using a fractal detection algorithm (default: 5-bar period). Maintains a rolling window of recent structure points (default: 4 levels) and draws connecting lines to show trend structure. Fair Value Gap (FVG) Detection: Automatically detects price gaps where three consecutive candles create an imbalance. Bullish FVGs occur when the current low exceeds the high two bars ago. Bearish FVGs occur when the current high is below the low two bars ago. Gaps persist for a configurable duration (default: 320 bars) and fade when price fills the gap. Liquidity Void Detection: Identifies candles where the high-low range exceeds an ATR threshold (default: 1.7x ATR) while volume is below average (default: 65% of 20-bar average). These conditions suggest areas where liquidity may be thin. Price/Volume Divergence: Uses linear regression to detect when price trend direction disagrees with volume trend direction. A divergence alert appears when price is trending up while volume is trending down, or vice versa. Peer Momentum Heatmap (PMH): Calculates composite momentum scores for up to 6 symbols across 4 timeframes. Each score combines RSI (default: 14 periods) and StochRSI (default: 14 periods, 3-bar smooth) to create a momentum composite between -1 and +1. The highest absolute momentum score across all combinations is displayed in the HUD. Custom settings using Fractal Pivots, Skeleton Structure, Pulse Liquidity Voids, Bottom Colorful HeatMaps, and Iridescent Field. --- Visual Components Spectrum Aura Glow: ATR-weighted bands (default: 0.25x ATR) that expand and contract around price action, indicating volatility conditions. The thickness adapts to market volatility. Chromatic Flow Trail: A blended line combining EMA and WMA of price (default: 8-period EMA blended with WMA at 65% ratio). The trail uses gradient colors that shift based on a phase oscillator, creating an iridescent effect. Volume Heat Projection: Creates horizontal volume profile bands at price levels (default: 14 levels). Scans recent bars (default: 150 bars) to calculate volume concentration. Each level is colored based on its volume density relative to the maximum volume level. Structure Skeleton: Dashed lines connecting fractal pivot points. Uses two layers: a primary line (2-3px width) and an optional glow overlay (4-5px width) for enhanced visibility. Fractal Markers: Diamond shapes placed at pivot high and low points. Color-coded: primary color for highs, secondary color for lows. Iridescent Color Themes: Five color themes available: Iridescent (default), Pearlescent, Prismatic, ColorShift, and Metallic. Colors shift dynamically using a phase oscillator that cycles through the color spectrum based on bar index and a speed multiplier (default: 0.35). --- HUD Console Metrics The right-side HUD displays seven key metrics: Flow: Shows OFI status: ▲ FLOW BUY when normalized OFI exceeds imbalance threshold (default: 2.2), ▼ FLOW SELL when below -2.2, or ◆ FLOW BAL when balanced. Struct: Structure trend bias: ▲ STRUCT BULL when microtrend > 2, ▼ STRUCT BEAR when < -2, or ◆ STRUCT RANGE when neutral. Smart$: Institutional activity: ◈ ACCUM when smart money index = 1, ◈ DISTRIB when = -1, or ○ IDLE when inactive. Liquid: Liquidity state: ⚡ VOID when a liquidity void is detected, or ● NORMAL otherwise. Diverg: Divergence status: ⚠ ALERT when price/volume divergence detected, or ✓ CLEAR when aligned. PMH: Peer Momentum Heatmap status: Shows dominant timeframe and momentum score. Displays 🪩 for bull surge (above 0.55 threshold) or 🧨 for bear surge (below -0.55). FVG: Fair Value Gap status: Shows active gap count or CLEAR when no gaps exist. Displays GAP LONG when bullish gap detected, GAP SHORT when bearish gap detected. Pearlscent Color with Volume Heatmap. Parameters and Settings Microstructure Engine: Analysis Depth: 20-250 bars (default: 55) - Controls OFI smoothing period Liquidity Threshold ATR: 1.0-4.0 (default: 1.7) - Multiplier for void detection Imbalance Ratio: 1.5-6.0 (default: 2.2) - Standard deviations for OFI significance Smart Money Layer: Smart Money Window: 10-150 bars (default: 24) - Period for ROC calculations Accumulation Threshold: 40-95% (default: 65%) - Volume ROC threshold Structural Mapping: Fractal Pivot Period: 3-15 bars (default: 5) - Period for pivot detection Structure Memory: 2-8 levels (default: 4) - Number of structure points to track Volume Heat Projection: Heat Map Lookback: 60-400 bars (default: 150) - Bars to analyze for volume profile Heat Map Levels: 5-30 levels (default: 14) - Number of price level bands Heat Map Opacity: 40-100% (default: 92%) - Transparency of heat map boxes Heat Map Width Limit: 6-80 bars (default: 26) - Maximum width of heat map boxes Heat Map Visibility Threshold: 0.0-0.5 (default: 0.08) - Minimum density to display Iridescent Enhancements: Visual Theme: Iridescent, Pearlescent, Prismatic, ColorShift, or Metallic Color Shift Speed: 0.05-1.00 (default: 0.35) - Speed of color phase oscillation Aura Thickness (ATR): 0.05-1.0 (default: 0.25) - Multiplier for aura band width Chromatic Trail Length: 2-50 bars (default: 8) - Period for trail calculation Trail Blend Ratio: 0.1-0.95 (default: 0.65) - EMA/WMA blend percentage FVG Persistence: 50-600 bars (default: 320) - Bars to keep FVG boxes active Max Active FVG Boxes: 10-200 (default: 40) - Maximum boxes on chart FVG Base Opacity: 20-95% (default: 80%) - Transparency of FVG boxes Peer Momentum Heatmap: Peer Symbols: Comma-separated list of up to 6 symbols (e.g., "BTCUSD,ETHUSD") Peer Timeframes: Comma-separated list of up to 4 timeframes (default: "60,240,D") PMH RSI Length: 5-50 periods (default: 14) PMH StochRSI Length: 5-50 periods (default: 14) PMH StochRSI Smooth: 1-10 periods (default: 3) Super Momentum Threshold: 0.2-0.95 (default: 0.55) - Threshold for surge detection Clarity & Readability: Liquidity Void Opacity: 5-90% (default: 30%) Smart Money Footprint Opacity: 5-90% (default: 35%) HUD Background Opacity: 40-95% (default: 70%) Iridescent Field: Field Opacity: 20-100% (default: 86%) - Background color intensity Field Smooth Length: 10-200 bars (default: 34) - Smoothing for background gradient --- Alerts The indicator provides seven alert conditions: Liquidity Void Detected - Triggers when void conditions are met Strong Order Flow - Triggers when normalized OFI exceeds imbalance ratio Smart Money Activity - Triggers when accumulation or distribution detected Price/Volume Divergence - Triggers when divergence conditions occur Structure Shift - Triggers when structure polarity changes significantly PMH Bull Surge - Triggers when PMH exceeds positive threshold (if enabled) PMH Bear Surge - Triggers when PMH exceeds negative threshold (if enabled) Bull/Bear Prismatic FVG - Triggers when new FVG is detected (if FVG display enabled) --- Usage Considerations Performance may vary on lower timeframes due to the volume heat map calculations scanning multiple bars. Consider reducing heat map lookback or levels if experiencing slowdowns. The PMH feature requires data requests to other symbols/timeframes, which may impact performance. Limit the number of peer symbols and timeframes for optimal performance. FVG boxes automatically expire after the persistence period to prevent chart clutter. The maximum box limit (default: 40) prevents excessive memory usage. Color themes affect all visual elements. Choose a theme that provides good contrast with your chart background. The indicator is designed for overlay display. All visual elements are positioned relative to price action. Structure lines are drawn dynamically as new pivots form. On fast-moving markets, structure may update frequently. Volume calculations assume typical volume data availability. Symbols without volume may show incomplete data for volume-dependent features. --- Technical Notes Built on Pine Script v6 with dynamic request capability for PMH functionality. Uses exponential moving averages (EMA) and weighted moving averages (WMA) for trail calculations to balance responsiveness and smoothness. Volume profile calculation uses price level buckets. Higher levels provide finer granularity but require more computation. Iridescent color engine uses a phase oscillator with sine wave calculations for smooth color transitions. Box management includes automatic cleanup of expired boxes to maintain performance. All visual elements use color gradients and transparency for smooth blending with price action. --- Customization Examples Intraday Scalping Setup: Analysis Depth: 30 bars Heat Map Lookback: 100 bars FVG Persistence: 150 bars PMH Window: 15 bars Fast color shift speed: 0.5+ Macro Structure Tracking: Analysis Depth: 100+ bars Heat Map Lookback: 300+ bars FVG Persistence: 500+ bars Structure Memory: 6-8 levels Slower color shift speed: 0.2 --- Limitations Volume heat map calculations may be computationally intensive on lower timeframes with high lookback values. PMH requires valid symbol names and accessible timeframes. Invalid symbols or timeframes will return no data. FVG detection requires at least 3 bars of history. Early bars may not show FVG boxes. Structure lines connect points but do not predict future structure. They reflect historical pivot relationships. Color themes are aesthetic choices and do not affect calculation logic. The indicator does not provide trading signals. All visual elements are analytical tools that require interpretation in context of market conditions. Open Source This indicator is open source and available for modification and distribution. The code is published with Pine Script v6 compliance. Users are free to customize parameters, modify calculations, and adapt the visual elements to their trading needs. For questions, suggestions, or anything please talk to me in private messages or comments below! Would love to help! - officialjackofalltrades
Chỉ báo Pine Script®
của officialjackofalltrades
1
MarketMind LITEM🜁rketMind LITE ──────────────────── Essential Market Awareness, Reduced to Its Core M🜁rketMind LITE is a lightweight market awareness tool designed to display essential situational context . It provides basic orientation and movement awareness without interpretation, risk framing, diagnostics, or decision guidance. This script is designed as a standalone awareness layer. It does not evaluate trade quality, issue signals, or influence decision-making. WHAT IT DOES ──────────────────── M🜁rketMind LITE presents a minimal, static view of current market conditions focused entirely on awareness rather than analysis. The system displays only essential context, allowing traders to stay oriented without introducing judgment, noise, or implied direction. The script provides visibility into: Time-of-day session context Basic market regime classification (trending, range-bound, mixed) Short-term momentum direction only (up, down, neutral) A clean, static HUD display M🜁rketMind LITE also includes a minimal visual state indicator that reflects recent price responsiveness, intended to be observed over time alongside the trader’s own experience. The goal is to support awareness without influence . HOW TO USE IT ──────────────────── M🜁rketMind LITE is not a signal generator. It is designed to remain visible in the background of any chart, offering quiet orientation while traders rely entirely on their own process for analysis and execution. Common use cases include: Maintaining session awareness Preserving context during focused trading periods Reducing cognitive load while monitoring markets M🜁rketMind LITE does not evaluate risk, alignment, or opportunity. It simply shows what is happening. DESIGN PHILOSOPHY ──────────────────── M🜁rketMind LITE is intentionally minimal. It includes only essential awareness elements and excludes all interpretive or evaluative logic: Situational context only Directional momentum (up / down / neutral) No diagnostics, confidence, or conviction framing No process, risk, or quality assessment Presentation controls only (HUD on/off, size, position) Nothing is inferred. Nothing is suggested. This script shows market state without interpretation. WHO IT IS FOR ──────────────────── M🜁rketMind LITE is suited for traders who: Want passive situational awareness Prefer minimal on-chart information Already operate with a defined decision process It is not designed for: Analytical or diagnostic use Risk evaluation or context synthesis Traders seeking guidance or confirmation IMPORTANT NOTES ──────────────────── M🜁rketMind LITE does not provide financial advice No system can predict future price behavior This tool is designed for awareness only Used appropriately, M🜁rketMind LITE helps traders stay oriented without interference.
Chỉ báo Pine Script®
của nedra-codes
Open Interest Bubbles [BackQuant]Open Interest Bubbles A visual OI positioning overlay that aggregates futures open interest across major venues, normalizes it into a consistent “signal strength” scale, then plots extreme events as bubbles, labels, and optional horizontal levels directly on price. What this is for Open interest is one of the cleanest ways to track when positioning is building, unwinding, or aggressively shifting. The problem is raw OI is noisy, exchange-specific, and hard to compare across time. This script solves that by: - Aggregating OI across multiple exchanges. - Letting you choose what “OI signal” you care about (raw, delta, percent versions). - Normalizing the signal so “big events” are easy to spot. - Plotting those events as bubbles and levels at the exact price they occurred. You end up with a clean, fast visual map of where large positioning changes occurred, and where those events may later matter as reaction points. ──────────────────────────────────────────────────────────── Plotting types (what you can display) Bubbles This mode plots OI events as size-bucketed circles on the chart. Bigger bubbles represent stronger normalized events. You can tune: - Bubble sizing by bucket (Tiny → Huge). - Heatmap vs solid color styling. - Signed vs unsigned coloring (positive/negative separation or magnitude-only). Best use: - Spotting “where something changed” at a glance. - Identifying clusters of positioning events around key price zones. - Seeing whether the market is repeatedly building/closing positions at similar levels. Levels Levels mode draws a horizontal line at the anchor price when an extreme OI event triggers. These act like “positioning memory” levels: - They do not claim to be support/resistance by themselves. - They highlight prices where the derivatives market clearly did something meaningful. Best use: - Marking potential reaction zones. - Combining with your price action tools (structure, OBs, FVGs) to confirm whether an OI level aligns with a technical level. - Building a “map” of where leverage likely entered or exited. Modes available in the script: - Off - Bubbles - Bubbles + Labels - Labels Only - Levels + Labels ──────────────────────────────────────────────────────────── Aggregated Open Interest source (multi-exchange) This indicator builds a single aggregated OI series by requesting OI data from multiple exchanges and summing it. You can toggle exchanges on/off: - Binance, Bybit, OKX, Bitget, Kraken, HTX, Deribit You can also choose OI units: - COIN , OI in base units (native sizing) - USD , converted for a dollar-value representation Important note: Not every symbol has OI data on every venue. If the script cannot build an aggregated series for the symbol, it will throw an error rather than quietly plotting garbage. ──────────────────────────────────────────────────────────── OI Source, what the bubbles are measuring You control what “signal” is normalized and plotted: - Delta , change in aggregated OI from the prior bar. Use when you want to highlight bursts of new positioning or sudden unwind events. - Raw OI , the aggregated open interest level itself. Use when you want to highlight absolute positioning build-up periods. - Delta % , percent change in OI. Use when you want moves normalized to the current OI regime, useful across different market eras. - Raw OI % , percent change form of the raw series. Use when you want relative changes rather than absolute size. Practical guidance: - Delta modes are best for “event detection”. - Raw modes are better for “regime context” and whether positioning is structurally rising or fading. ──────────────────────────────────────────────────────────── Normalization (the key to making it readable) Because OI varies massively across assets and time, the script includes multiple normalization modes to convert your chosen OI source into a comparable “strength” value. Options: - ZScore , deviation from a rolling mean in standard deviation units. - StdNorm , scaled by rolling standard deviation. - AbsZScore , absolute value version for magnitude-only mapping. - AbsStdNorm , absolute value version for magnitude-only mapping. - None , plots raw values (advanced users only, often too noisy visually). Why this matters: Normalization makes a “1.5” or “3.0” threshold mean something across different assets and timeframes, instead of being stuck to raw OI units. ──────────────────────────────────────────────────────────── Threshold system (when bubbles/levels trigger) The plot is driven by two user thresholds: - Base Threshold Controls where “meaningful” events start. Raising this reduces noise and focuses on larger deviations. - Extreme Threshold Controls what qualifies as a top-tier event. Extreme events are what you typically want to convert into labels and levels. You also control side filtering: - Both , show positive and negative events. - Positive Only , show only increases (or positive signal side depending on source). - Negative Only , show only decreases (or negative signal side). In practice: - Use Base Threshold to tune chart cleanliness. - Use Extreme Threshold to mark only the “big stuff” that tends to matter later. ──────────────────────────────────────────────────────────── Anchor Source (where the bubble/level is placed) The indicator places bubbles, labels, and levels at a price anchor you choose: - HL2, Close, Open, High, Low, VWAP This is important because “where you pin the event” changes how it reads: - Close is clean and consistent for backtesting and candle-close logic. - High/Low can better represent where the fight occurred intrabar. - VWAP can be useful for “fair price” anchoring in active markets. ──────────────────────────────────────────────────────────── Style system (theme, palette, signed logic) This script is built to look good and stay readable on busy charts. Themes - BackQuant, Classic, Ice, Fire, Mono, Custom Palette Mode - Solid , one consistent color - Heatmap , intensity increases with magnitude - Single Color Adaptive , adapts to chart background for clarity Side Coloring - Signed , positive and negative events can use different ramps - Unsigned , magnitude-only coloring Negative theme handling: - Auto (mirrors your chosen theme), - Invert (flips the ramp), - Custom (fully user-defined negative palette). What this gives you: - You can run a clean “mono” look for professional charts. - Or a high-contrast heatmap for fast scanning. - Or fully custom branding colors for BackQuant-style presentation. ──────────────────────────────────────────────────────────── Labels (what’s inside the label) When labels are enabled, the script can display: - OI , the aggregated OI value - OI + Norm , OI plus normalized strength - Norm Only , just the normalized strength - Src + Norm , the selected source value (Delta, Raw, %) plus normalized strength You can also control: - Left/Center/Right label alignment - Number formatting style (Raw, Compact, Volume format) Best practice: - Use “Src + Norm” when you want both the raw event size and its rarity. - Use “Norm Only” when you want a clean, minimal chart. ──────────────────────────────────────────────────────────── Levels and object limits (performance and cleanliness) Because this script draws objects, it includes a hard cleanup system: - You set Max Levels / Labels to control chart clutter. - The script deletes older lines/labels when the limit is exceeded. This is critical if you trade lower timeframes, where OI events can trigger frequently. ──────────────────────────────────────────────────────────── How to interpret the signals What a large bubble usually means: - A statistically large positioning change relative to recent history. - This can represent fresh leverage entering, forced liquidations, or aggressive de-risking, depending on direction and context. How to use levels: - Treat them as “attention levels”, not automatic entries. - Combine them with structure and liquidity tools: - If price revisits an OI level and shows rejection, it often confirms that level mattered. - If price slices through with no reaction, it often indicates the OI event was transitional, not defended. Common setups: - Clustered extreme bubbles near a breakout zone, then retest later. - Extreme negative event at capitulation low, followed by structure flip. - Extreme positive build into resistance, then unwind and mean reversion. Also, please check out @NoveltyTrade for the OI Aggregation logic & pulling the data source! Here is the original script:
Chỉ báo Pine Script®
của BackQuant
1
Cosmic Crypto Golden ZoneCosmic Crypto Golden Zone ## Overview **Cosmic Crypto Golden Zone** is an all-in-one swing trading indicator designed to identify high-probability retracement entries using Fibonacci levels, multi-timeframe confluence, and a simple Buy/Sell scoring system. The indicator removes the guesswork from trading pullbacks by combining structure analysis, momentum indicators, and volume confirmation into a single, easy-to-read signal. **Best Used For:** Swing trading on 15m, 1H, and 4H timeframes in crypto, forex, and stocks. --- ## Key Features ### 🎯 Golden Zone Detection Automatically identifies the optimal entry zone (0.5 - 0.786 Fibonacci retracement) where price is most likely to reverse and continue the trend. ### 📊 Buy/Sell Scoring (1-10) A simplified signal table that scores setups from 1-10, telling you exactly when to buy or sell without needing to interpret multiple indicators. ### 📈 Multi-Timeframe Confluence Filters trades to align with the higher timeframe trend (default: 4H), ensuring you only trade in the dominant direction. ### 🔍 Structure Detection (HH/HL/LH/LL) Tracks market structure with Higher Highs, Higher Lows, Lower Highs, and Lower Lows to determine trend direction. ### 💧 Liquidity Sweep Detection Identifies when price sweeps beyond the 0.886 level (stop-hunting zone) and reclaims the entry zone—a premium reversal signal. ### 📉 RSI Divergence Detection Spots bullish and bearish divergences within the golden zone for additional confirmation. ### 🛡️ Dynamic Stop Loss ATR-based stop loss that adjusts to current volatility, protecting you in both calm and volatile markets. ### 🎯 Smart Take Profit Calculates TP based on your chosen entry point (FOMO, ENTRY, or Average) with customizable Risk:Reward targeting. --- ## How to Read the Signal Table The table in the bottom-right corner gives you everything you need at a glance: | Row | What It Shows | |-----|---------------| | **BUY/SELL + Score** | Direction and strength (1-10) | | **Action** | 🚀 NOW (8+), ✓ READY (6-7), 👀 WATCH (4-5), ⏳ WAIT (<4) | | **Zone** | Whether price is IN the golden zone or waiting | | **Entry / TP / SL** | Your exact trade levels | | **R:R** | Risk-to-Reward ratio with quality indicator | ### Score Breakdown | Score | Meaning | Action | |-------|---------|--------| | **8-10** | High conviction setup | Enter on next candle close | | **6-7** | Good setup | Enter with confirmation candle | | **4-5** | Possible setup | Wait for more confluence | | **1-3** | Weak/No setup | Skip this trade | --- ## How to Use: Step-by-Step ### Step 1: Check the Trend Direction Look at the **Structure** in the info display: - **BULLISH** (HH + HL pattern) → Only look for BUY signals - **BEARISH** (LL + LH pattern) → Only look for SELL signals ### Step 2: Wait for Price to Enter the Golden Zone The golden zone is highlighted between the **FOMO (0.618)** and **ENTRY (0.786)** levels. The table will show "✓ IN ZONE" when price reaches this area. ### Step 3: Check Your Score Wait for the Buy/Sell score to reach **6 or higher** before considering an entry. Higher scores = higher probability. ### Step 4: Look for Confirmation The best entries have multiple confirmations: - ✅ Score 6+ - ✅ In Golden Zone - ✅ Stochastic oversold/overbought - ✅ RSI Divergence (DIV label) - ✅ Liquidity Sweep (LIQ label) — *Premium signal* - ✅ Bullish/Bearish candle pattern ### Step 5: Execute the Trade Use the levels shown on the chart and in the table: - **Entry:** FOMO (aggressive) or ENTRY (conservative) - **Stop Loss:** Below/above the SL line (red) - **Take Profit:** At the TP line (green) --- ## Chart Labels Explained | Label | Color | Meaning | |-------|-------|---------| | **FOMO: ** | Green | 0.618 Fib - Aggressive entry level | | **ENTRY: ** | Yellow (Bold) | 0.786 Fib - Conservative entry level | | **LIQ: ** | Red | 0.886 Fib - Liquidity/stop-hunt zone | | **TP: ** | Green | Take Profit target | | **SL: ** | Red (Bold) | Stop Loss level | | **R:R ** | Green/Orange | Risk-to-Reward ratio | | **HH/HL/LH/LL** | Various | Structure swing labels | | **DIV** | Lime/Pink | RSI Divergence detected | | **LIQ** (arrow) | Lime/Red | Liquidity sweep signal | | **AE** | Green/Red | Williams Vix Fix Aggressive Entry | | **B/S** | Green/Red | Buy/Sell signal with score | --- ## Recommended Settings ### For Crypto (BTC, ETH, Altcoins) - **Timeframe:** 1H or 4H - **HTF:** 4H or Daily - **Use Logarithmic Fibs:** ✅ ON - **TP R:R Target:** 2.0 - 3.0 ### For Forex - **Timeframe:** 15m or 1H - **HTF:** 4H - **Use Logarithmic Fibs:** ❌ OFF - **TP R:R Target:** 1.5 - 2.0 ### For Stocks - **Timeframe:** 1H or Daily - **HTF:** Daily or Weekly - **Use Logarithmic Fibs:** ✅ ON - **TP R:R Target:** 2.0 --- ## Settings Reference ### Structure (ZigZag) - **Left Bars:** Lookback period for pivot detection (default: 10) - **Right Bars:** Confirmation bars (default: 2) - **Show Swing Labels:** Display HH/HL/LH/LL markers ### Multi-Timeframe Confluence - **Enable MTF Filter:** Only trade when aligned with HTF trend - **Higher Timeframe:** The timeframe to check trend (default: 4H) ### ADX Trend Strength - **Enable ADX Filter:** Filter out choppy/ranging markets - **ADX Threshold:** Minimum ADX value for trend confirmation (default: 20) ### Auto Fib Settings - **Use Logarithmic Fibs:** Better for large % moves (crypto/stocks) - **Fib Length:** How far the fib lines extend ### Split-Entry Trade Planner - **Entry 1 Ratio:** FOMO level (default: 0.618) - **Entry 2 Ratio:** ENTRY level (default: 0.786) - **TP Calculation Mode:** Base TP on ENTRY, FOMO, or Average - **TP R:R Target:** Your desired risk-to-reward ratio - **Use ATR-Based Dynamic SL:** Volatility-adjusted stop loss - **SL ATR Multiplier:** How many ATRs below entry for SL ### Williams Vix Fix - **Show Bullish/Bearish AE:** Aggressive entry signals based on volatility extremes - **Only Show in Golden Zone:** Filter VixFix signals to golden zone only --- ## Pro Tips ### 1. The Liquidity Sweep is Gold When you see the **LIQ** arrow after price wicks below 0.886 and reclaims 0.786, this is often the best entry. Stops have been hunted, weak hands are out, and smart money is entering. ### 2. Don't Fight the HTF Trend If the 4H is bearish, don't take long signals on the 15m just because the score is high. Always align with the bigger picture. ### 3. Wait for "IN ZONE" Patience pays. The best setups come when price actually pulls back to the golden zone. Chasing breakouts leads to poor R:R. ### 4. Score 6+ is the Minimum Scores of 4-5 can work, but your win rate will be significantly higher waiting for 6+. Scores of 8+ are rare but highly reliable. ### 5. Use Multiple Timeframes Check the setup on your trading timeframe AND one timeframe higher. If both show bullish structure with good scores, confidence is higher. ### 6. Respect the Stop Loss The SL is placed below the liquidity zone for a reason. If price closes below it, the setup is invalidated. Don't move your stop. --- ## Alerts Available - **High Confluence Long/Short** — When score reaches your threshold - **Bullish/Bearish Liquidity Sweep** — Premium reversal signal - **RSI Divergence Detected** — Divergence in golden zone - **Williams Vix Fix AE** — Aggressive entry signal --- ## Credits Created by **Cosmic Crypto** Combines concepts from: - Fibonacci Retracement Trading - Smart Money Concepts (Liquidity Sweeps) - Williams Vix Fix - Multi-Timeframe Analysis - Stochastic RSI - ADX Trend Strength --- *Trade responsibly. Past performance does not guarantee future results. Always use proper risk management.*
Chỉ báo Pine Script®
của Cosmic_Crypto25
Trading Module [BackQuant]Trading Module A modular overlay that lets you combine three core components, a Trend Model, an Impulse Model, and an optional Stop Loss framework, then layer in a multi-symbol RSI screener plus a full price action toolkit (market structure, FVGs, order blocks, volumetric S/R). Built for discretionary execution and study, not for blind automation. ──────────────────────────────────────────────────────────── What this script is This indicator is designed like a “module picker”. Instead of forcing one opinionated system, it gives you selectable models that can be combined into a workflow: 1) Trend Model , answers “what side is the market biased to?” 2) Impulse Model , answers “is there currently expansion, pressure, or a momentum event worth paying attention to?” 3) Stop Loss Layer , answers “where are reasonable invalidation zones if I’m managing risk manually?” 4) RSI Screener , answers “what are my watchlist assets doing right now, on multiple timeframes, in one place?” 5) Price Action Concepts , answers “what structure levels, imbalances, institutional zones, and volume-based levels matter?” You can run it as a lightweight overlay (trend + impulse only), or turn on the heavier price action stack when you want deeper context. ──────────────────────────────────────────────────────────── How to use it, the intended workflow Step 1, pick your Trend Model The trend model is your baseline directional filter. It is meant to reduce “random trading” by keeping you aligned with the dominant structure or momentum bias. Trend Models (examples) Typical usage: - If the trend model reads bullish, you focus on long setups and avoid shorting into strength. - If the trend model reads bearish, you focus on short setups and avoid catching bottoms. - If the trend model is neutral or mixed, you reduce size or wait for confirmation. What you can expect from the options (without exposing internal weighting or thresholds): - Universal Trend+ , a composite trend regime model that blends multiple families of trend evidence. It is designed to be more robust than a single indicator and reduce “one-indicator failure modes”. - EMA Cross , a classic fast vs slow trend bias. Simple, responsive, but can whipsaw in ranges. - DEMA ATR , a smoother trend anchor that adapts to volatility. Often cleaner in chop than basic crosses. - Relative Strength Overlay , a strength scoring style bias built from an RSI-style internal scoring process. Useful when you want “strength state” more than “moving average state”. Color conventions: - Long color and short color are user-defined, so you can keep consistent visuals across your BackQuant suite. Step 2, pick your Impulse Model Impulse is separate from trend on purpose. Trend answers direction, impulse answers timing. A market can be trending but not currently impulsing, or impulsing in a counter-trend squeeze. Impulse Models (examples) How to use impulse signals: - Treat impulse as “permission” to engage, not as a standalone trade trigger. - Best pairing is trend aligned impulse, meaning bullish trend model plus bullish impulse, bearish plus bearish. - Counter-trend impulses can be used as warning signals, take-profit cues, or short-lived mean reversion opportunities, depending on your style. The impulse options in this module are built around pressure and expansion detection. They are meant to identify moments where conditions shift from “noise” to “initiative activity”. Step 3, choose a Stop Loss framework This script includes optional stop visualization modes. These are not meant to be blindly used as a “one true stop”, they are tools for structuring invalidation around volatility or defined percentage bands. Stop Loss (examples) Stop loss options: - None , no overlay. - Dynamic , a volatility-aware band. Useful when you want stops to widen in high vol and tighten in low vol. - Fixed , preset percentage bands. Useful for quick structure around risk units, scaling, or rule-based journaling. - Bar-to-Bar , a micro-structure invalidation reference that uses the prior bar as a risk anchor. Useful for very tight management and fast invalidation. How to apply them properly: - Stops should be placed where the trade idea is wrong, not where you “feel pain”. - A volatility stop is usually an environment stop, while a fixed stop is usually a plan stop. - If you use impulses for entries, your stop should account for impulse volatility, otherwise you get stopped on the exact move you’re trying to capture. ──────────────────────────────────────────────────────────── RSI Screener module This module is built for scanning multiple symbols and timeframes from one chart, without switching tabs. RSI Screener (example) What it does: - Lets you define up to 10 symbols (defaults to major crypto pairs). - Each slot can have its own timeframe. - Computes an RSI value per symbol and assigns a directional state relative to a midline threshold. - Displays a stacked overlay readout using a monospace label style for quick scanning. How to use it: - Set slots 1–5 as your majors, 6–10 as your rotation candidates. - Use higher timeframes for regime, lower timeframes for timing. - Use the midline threshold as a “trend bias” line, not an overbought or oversold line. - Treat the screener as context, not a signal. Your chart model and price action still decide the trade. Performance note: - Screeners are heavy by nature because each symbol is a security() request. Keep the number of enabled slots reasonable if you are on lower-end hardware or running many scripts. ──────────────────────────────────────────────────────────── Price Action Concepts and Market Structure stack This script includes a full price action toolkit intended to provide “where” context, levels, zones, and structural breaks, so the trend and impulse models are not operating in a vacuum. Price Action Concepts / Market Structure (example) This section is split into five major blocks: 1) Market Structure, Swing and Internal You can enable swing structure and internal structure separately, with independent lookbacks. - Swing structure tracks larger, slower pivots, better for macro trend structure. - Internal structure tracks tighter pivots, better for entry timing and micro shifts. It prints structure events as: - BOS (Break of Structure), continuation-style break. - MSB (Market Structure Break), shift-style break. Some traders call this CHoCH, here it’s presented as an MSB concept. Usage: - Swing BOS is good for confirming a larger regime. - Internal structure is good for timing entries within the swing context. - If internal flips but swing does not, treat it as a warning, not necessarily a full reversal. 2) Fair Value Gaps (FVG) Optional imbalance boxes that highlight displacement zones. Key controls: - Timeframe selection (or current timeframe). - How many to keep on chart. - How far to extend them right. Usage: - FVGs are best treated as “areas of interest”, not guaranteed support/resistance. - They help you frame where price might rebalance after an impulse event. 3) Order Blocks (OB) Optional institutional-style zones detected from structure and candle logic, with filters. Key controls: - Fractal type (3 or 5) changes how “strict” structure detection is. - Break method (close vs high/low) changes confirmation strictness. - Optional filter with FVG distance to reduce low-quality blocks. - Extend, delete-when-filled, and label options for chart hygiene. Usage: - OBs are strongest when aligned with swing context and confirmed by volume or displacement. - Filled blocks are informational, they can be removed to reduce clutter. 4) Volumetric Support and Resistance This module creates support and resistance “zones” based on high-volume pivot events, then manages them over time. Key controls: - Detection sensitivity, volume multiplier, and lookback period. - Minimum distance between zones to avoid stacking duplicates. - Remove broken, extend, and volume display toggles. How to interpret: - Levels are thicker zones, not single price lines. - “Touches” are tracked as an interaction count, useful for identifying repeatedly defended or attacked zones. - High-volume zones are visually emphasized, these tend to matter more than low volume pivots. Usage: - Pair volumetric levels with impulse signals, an impulse into a high-volume resistance zone is not the same as an impulse in open space. - Use volumetric levels as structure anchors for invalidation and targets. 5) Alerts The price action stack includes alerts for new levels, touches, breaks, and order block creation or interaction. Use alerts for: - Watchlist management, you get notified when price hits an area. - Avoiding screen-watching, especially when you run multi-timeframe setups. ──────────────────────────────────────────────────────────── Core philosophy of the module This indicator is not “one model to rule them all”. It is meant to let you build a trading process: - Trend decides bias. - Impulse decides engagement timing. - Price action decides location and structure. - Stops decide risk containment. - Screener decides where to look. If you only use one layer, you are throwing away most of the edge this style of framework is designed to create. The strength is in confluence and filtering. ──────────────────────────────────────────────────────────── Suggested presets Preset A, clean trend-following overlay - Trend Model, Universal Trend+ or DEMA ATR - Impulse Model, either option - Stop Loss, Dynamic - Price action modules off (structure off, FVG off, OB off, volumetric off) - Screener on (high timeframe) Preset B, execution and structure mode - Trend Model on - Impulse Model on - Market Structure on (swing + internal) - FVG on (current timeframe or one higher) - Order Blocks on with FVG filter - Volumetric S/R on - Stop Loss, Dynamic or Bar-to-Bar depending on speed Preset C, watchlist scanner mode - Screener on - Minimal chart overlays on - Use alerts for touches and breaks - Only open charts that show alignment across trend and impulse ──────────────────────────────────────────────────────────── Notes and limitations - This is a heavy script when multiple modules are enabled, because it draws objects and can request multiple symbols. - The models are designed to be modular, so not every combination will be optimal for every market or timeframe. ──────────────────────────────────────────────────────────── Quick input map Main Settings/Models - Select Trend Model - Select Impulse Model - Select Stop Loss - Show Screener - Long/Short colors Screener Settings - Label size and offsets - RSI length and midline - Up to 10 symbol slots with per-slot timeframe and enable toggle Market Structure - Swing and internal structure mode and lookbacks - Bull and bear colors Fair Value Gaps - Enable, count, timeframe, extend, colors Order Blocks - Enable, labels, fractal type, break method - FVG filter and distance - Lookback, extend, delete-when-filled, colors Volumetric S/R - Sensitivity, volume multiplier, analysis window - Level limits, distance rules, extension and cleanup rules - Volume display preferences ──────────────────────────────────────────────────────────── End note This is intended as a full visual decision-support module for discretionary traders who want trend, timing, structure, and watchlist scanning in one place. Use it to build a repeatable process, then validate that process with proper testing and journaling before risking real capital.
Chỉ báo Pine Script®
của BackQuant
2
TRV & nTRV - Trimmed Range VolatilityGrid bots require stable volatility measurement - ATR becomes misleading when gaps and sudden spikes distort the average. TRV (Trimmed Range Volatility) is an advanced version of ATR: it filters outliers at the extremes (highest and lowest ranges) and remains unaffected by gaps. This provides real-time, accurate volatility measurement for grid bot setup.Grid bots require stable volatility measurement - ATR becomes misleading when gaps and sudden spikes distort the average. TRV (Trimmed Range Volatility) is an advanced version of ATR: it filters outliers at the extremes (highest and lowest ranges) and remains unaffected by gaps. This provides real-time, accurate volatility measurement for grid bot setup. Why We Developed TRV? When a gap or sudden spike occurs in the morning, this extreme movement affects standard ATR calculations for an extended period. Even if the price moves sideways for the rest of the day, ATR remains elevated. This causes grid bots to operate with unnecessarily wide spacing and execute fewer trades. TRV Advantages: ✅ Unaffected by Gaps: Opening gaps don't distort the calculation ✅ Extreme Point Elimination: Filters the largest and smallest outlier candles ✅ Real-Time Accuracy: Shows current market volatility ✅ Grid Bot Optimization: Enables tighter and more efficient grid spacing ✅ Comparison Capability: Compare different stocks and timeframes with nTRV Grid Bot Usage: The TRV value is used directly to calculate the number of grid lines: (Resistance - Support) / TRV = Number of Grid Lines Example: Resistance: $110 Support: $90 TRV: $2 Grid Count: (110-90)/2 = 10 grid lines Features: Two Filtering Modes: Manual (enter number) or Percentage-Based (automatic ratio) Four Indicators in One: nTRV, TRV, ATR, and nATR all displayed on the same panel nTRV: Normalized value (percentage-based, for stock comparison) TRV: Absolute value (currency-based, for grid calculation) ATR & nATR Included: Standard ATR and nATR for direct comparison with TRV Comprehensive Analysis: Compare filtered (TRV) vs unfiltered (ATR) volatility side-by-side Default: 10% top, 10% bottom outlier elimination Conclusion: TRV is an advanced version of ATR specifically designed for grid bot traders. By filtering outlier movements, it provides more stable and reliable volatility measurement. The indicator includes both TRV (filtered) and ATR (unfiltered) on the same chart, giving traders a comprehensive view to make informed decisions. This dual-display approach enables more efficient grid strategies and increased trading frequency.
Chỉ báo Pine Script®
của ExperiMentalist
Order Blocks v2This is a short code script that shows you a REAL Order Blocks. There is many indicators that show you random blocks on the screen, these are by definition Order Blocks. The code is simple and short. You can use this indicator as an extra confluence or as a place to put your stop losses or to put your stop losses in profit. I recommend always keeping the "Consider order block only with following FVG" on, as the best Order Blocks are found with that setting on. I have a lot more code i can share, use this and let me know how it works for you! THE SETTINGS I USE ARE: (NO) Only show on on time levels 3,7,11,14 fractal bars 3 Order blocks on break of Fractal close or HL Close (YES) Consider order block only with following FVG Max distance of FVG following Order Blocks 2 Oder Block Height Body Dotted 13 length and 3 width
Chỉ báo Pine Script®
của nathanpeterson006
ForzAguanno - Premium / Discount (Range Glissant)Premium / Discount Zones – Dynamic Range (Fibo-based) This indicator highlights Premium, Discount, and Equilibrium zones using a dynamic Fibonacci range calculated from recent price action. It is designed to help traders contextualize price and avoid taking trades in unfavorable locations (e.g. buying too high or selling too low). - How it works The indicator automatically: - Detects the highest high (HH) and lowest low (LL) over a rolling range - Builds a Fibonacci-style structure between LL → HH - Defines three key areas: Discount Zone (lower part of the range) Equilibrium Zone (around the 50% level) Premium Zone (upper part of the range) Two additional extreme levels are used: 0.075 → deep discount 0.925 → deep premium These levels help isolate areas where price is statistically stretched. - Visual elements - Horizontal levels: - Green → Discount - Purple → Equilibrium - Red → Premium - Text labels are placed inside each zone for instant readability. Zones are extended into the future for cleaner visualization. - How to use it This tool is best used as a context filter, not a standalone signal generator. Typical use cases: Look for longs in Discount Look for shorts in Premium Use Equilibrium as a neutral / decision zone Combine with structure, momentum, or entry models It works particularly well with: Market structure concepts Smart money / range-based trading Session-based strategies ⚠️ Important notes This indicator does not predict direction It provides context, not signals Always combine with proper risk management Final thoughts The goal of this indicator is simplicity and clarity: Know where price is located inside its range before taking a trade. If you find it useful, feel free to share feedback.
Chỉ báo Pine Script®
của ForzAguanno18
CloudScore by ExitAnt [Upgrade]📘 CloudScore PRO by ExitAnt (v13) CloudScore PRO는 일목균형표(REAL Ichimoku Cloud)의 ‘진짜 상방 돌파’만을 감지하고, 여기에 총 10가지 추세·모멘텀·패턴·거래량 요소를 점수화하여 (0~9점) 현재 추세 전환의 강도를 직관적으로 알려주는 고급 추세 분석 지표입니다. 일목 구름은 본래 강력한 추세 전환 신호를 제공하지만 “위→안→위” 또는 “부분 돌파” 같은 왜곡 신호가 매우 많습니다. v13은 이를 완전히 제거하고, 오직 아래→안→위 또는 아래→위(직통) 형태의 ‘진짜 돌파’에서만 점수를 계산합니다. 🎯 지표 목적 * 진짜 일목구름 돌파만 필터링하여 신뢰도 상승 * 10개 기술 요소의 점수화(0~9점)로 한눈에 추세 강도 판단 * 거짓 진입 신호(위→안→위) 완전 제거 * 점수 0일 때도 ‘🔴’로 명확하게 무효 신호 표시 * 초보자부터 숙련자까지 모두 활용 가능한 추세 진입 필터링 지표 🧠 점수 계산 방식 (가중치 기반) 구름 돌파가 유효하게 발생하면, 아래 10가지 조건을 체크하여 각 항목별 가중치 점수가 합산됩니다. ▶ 기존 +1 점 항목 (5개) 1. 골든 크로스 발생 Fast MA가 Slow MA를 최근 N봉 내 상향 돌파 2. RSI 과매도 구간 RSI < 설정값 → 반등 가능성 증가 3. MACD 강세 전환 MACD < 0 & 시그널 상향 돌파 4. RSI 상승 다이버전스 가격 하락, RSI 상승 → 바닥 가능성 5. 종가 > MA200 장기 추세와 일치하는 경우만 점수 강화 ▶ 신규 +1 점 항목 (추가 5개) 6. ADX > 20 (추세 강도) 추세가 실제로 형성되고 있을 때 7. 거래량 스파이크 발생 거래량이 평균 대비 일정 배수 이상 증가 → 큰 매수 유입 8. Stochastic Oversold Cross %K < 30에서 골든크로스 → 저점 반등 신호 9. Bollinger Band Rebound 이전 봉이 하단 밴드를 이탈하고, 현재 봉이 중심선을 회복한 경우 10. 강세 캔들 패턴 (Bullish Engulfing / Hammer 등) 강한 반전 패턴 발생 시 > 점수는 단순 +1 합산이 아니라 > 각 요소의 중요도에 따른 가중치 합산 방식으로 계산됩니다. 📊 점수별 이모지 (8단계) | 점수 구간 | 이모지 | 의미 | | -------- | ------ | -------------- | | ≤ 0 | 🔴 | 무효 신호 | | 0 ~ 1 | ⚪ | 매우 약함 | | 1 ~ 2 | 🟡 | 약함 | | 2 ~ 3 | 🟢 | 관찰 필요 | | 3 ~ 4 | 🔵 | 양호 | | 4 ~ 5 | 📈 | 추세 형성 | | 5 ~ 6.5 | 🚀 | 매우 강함 | | **6.5+** | **👑** | **최상급 고신뢰 구간** | > 👑 이모지는 6.5점 초과에서만 표시되며, > 여러 핵심 조건이 동시에 충족된 극소수 구간에서만 나타납니다. 🖥 차트 표시 요소 * REAL Ichimoku Cloud(미래 이동 없는 실제 구름)을 기반으로 계산 * TRUE breakout(아래 → 위 돌파) 시 캔들 위에 점수 이모지 표시 * 최근 N개의 캔들만 표시 가능 * 우측 상단에 현재 점수 요소 설명 패널 표시 * 점수 0점일 때도 🔴 표시하여 신호의 부재를 명확히 표현 * 위→안→위처럼 잘못된 돌파는 완전히 제외됨 🔧 사용자 설정 * Tenkan / Kijun / SenkouB 기간 설정 * 점수 요소 개별 활성화/비활성화 * 이모지 커스터마이즈 * 최근 몇 개의 캔들까지 표시할지 설정 * MA, RSI, MACD, ADX, Bollinger 등 점수 요소 사용자 정의 가능 ⚠️ 유의사항 이 지표는 일목구름 돌파 기반의 확률적 보조 도구이며, 단독으로 매수·매도 결정을 내리는 용도로 사용해서는 안 됩니다. * 시장 변동성 * 시간 프레임 * 거래량 환경 에 따라 신호 강도는 달라질 수 있습니다. 실제 매매 적용 전 반드시 백테스트 및 시뮬레이션을 권장합니다. 오케이. 그럼 **지금 네 코드(v13, 가중치 + 8단계 이모지 기준)** 와 **완전히 1:1로 맞는 영어 설명 최종본**을 줄게. (퍼블릭 배포용으로 그대로 써도 되는 수준) # 📘 **CloudScore PRO by ExitAnt (v13)** CloudScore PRO is an advanced **Ichimoku-based trend scoring indicator** that detects only **true, valid Ichimoku Cloud breakouts** and evaluates the strength of the trend using a **weighted score system built from 10 technical components**. Unlike standard Ichimoku signals — which often generate distorted breakouts such as **“above → inside → above”** — CloudScore PRO v13 **filters these out completely** and only accepts the following structures as valid breakouts: * **below → inside → above** * **below → above (direct breakout)** This ensures that scoring is applied **only when a genuine trend transition occurs**. ## 🎯 Purpose of the Indicator * Filter out false Ichimoku Cloud breakouts * Evaluate trend strength using **10 weighted confirmation signals** * Visualize trend quality instantly using **8-stage emoji scoring** * Clearly mark invalid signals (score ≤ 0) * Serve as a robust **entry filter** for both beginners and advanced traders ## 🧠 Scoring Logic (Weighted System) When a valid cloud breakout occurs, CloudScore PRO evaluates the following 10 components and **adds weighted scores based on their importance**. ### ▶ Core Trend & Momentum Components (5) 1. **Golden Cross** * Fast MA crosses above Slow MA within the defined lookback period 2. **RSI Oversold Condition** * RSI below threshold, indicating potential reversal 3. **MACD Bullish Shift** * MACD below zero with bullish signal-line crossover 4. **RSI Bullish Divergence** * Price makes a lower low while RSI makes a higher low 5. **Close Above MA200** * Price aligned with the long-term trend direction ### ▶ Additional Confirmation Components (5) 6. **ADX Trend Strength** * Confirms that a real trend is forming 7. **Volume Spike** * Significant increase in trading volume vs average 8. **Stochastic Oversold Cross** * %K crosses upward below the 30 level 9. **Bollinger Band Rebound** * Price recovers after breaking below the lower band 10. **Bullish Candlestick Pattern** * Engulfing, Hammer, or similar reversal patterns > Scores are **not simple +1 increments**. > Each component contributes a **weighted value**, reflecting its real-world importance. ## 📊 Emoji Score System (8 Levels) | Score Range | Emoji | Meaning | | ----------- | ------ | ---------------------------------- | | ≤ 0 | 🔴 | Invalid / no signal | | 0 ~ 1 | ⚪ | Very weak | | 1 ~ 2 | 🟡 | Weak | | 2 ~ 3 | 🟢 | Moderate | | 3 ~ 4 | 🔵 | Decent | | 4 ~ 5 | 📈 | Trend forming | | 5 ~ 6.5 | 🚀 | Very strong | | **6.5+** | **👑** | **Premium, high-confidence setup** | 👑 **The crown emoji appears only when the total weighted score exceeds 6.5**, meaning multiple high-importance conditions are aligned simultaneously. This prevents “emoji inflation” and ensures that premium signals remain rare and meaningful. ## 🖥 Chart Features * Uses **REAL Ichimoku Cloud** (no future displacement) * Displays score emojis directly on breakout candles * Supports LONG / SHORT / BOTH modes * Optional display limited to the most recent N bars * Top-right panel explains scoring structure and logic * Completely ignores false breakouts (above → inside → above) ## 🔧 User Options * Adjust Ichimoku, MA, RSI, MACD, ADX parameters * Enable or disable individual scoring components * Fully customize emoji symbols * **Display only signals above a chosen minimum score** * e.g. show only 👑 setups by setting minimum score to 6.5 ## ⚠️ Disclaimer CloudScore PRO is a **probability-based trend evaluation tool**, not a standalone buy or sell signal. Signal strength may vary depending on: * Market volatility * Timeframe * Volume environment Always perform proper backtesting and apply sound risk management before using this indicator in live trading.
Chỉ báo Pine Script®
của ExitAnt_AI
Daily Close Breakout 20/10 + 200 (Signals)Daily Close Breakout 20/10 + 200 (Signals) A simple “check once per day” breakout signal tool designed for the Daily (1D) chart. Quickstart: * Signals are confirmed at the daily candle close. * If a triangle prints today, the earliest you act is the next day’s open (not the same candle). * Green triangle = consider entering long. * Red triangle = consider exiting. * Long-only (no shorts). How to use: * Use on the Daily (1D) timeframe. * Check the chart once per day after the daily candle closes. * Do not act intraday on signals. Rules (default settings 20 / 10 / 200): * BUY: A green up triangle prints when the daily close is above the prior 20-day high and above the 200-day Simple Moving Average. * SELL: A red down triangle prints when the daily close is below the prior 10-day low. Lines and colors: * Prior 20-day high (entry level): red * Prior 10-day low (exit level): yellow * 200-day Simple Moving Average: aqua Notes: * Best used on the Daily (1D) timeframe. Other timeframes may behave differently. * This script plots signals and reference levels only. For performance metrics, use a matching strategy/backtest script. * Educational use only. Not financial advice.
Chỉ báo Pine Script®
của FlyingOceanTiger
VCAI RSI Divergence +VCAI RSI Divergence+ is an RSI that shows trend, momentum, and divergence using V-CoresAI colour logic instead of a single white line. What it shows: Yellow RSI line → bullish momentum (RSI above its MA; buy-side pressure in control) Purple RSI line → bearish momentum (RSI below its MA; sell-side pressure in control) Thin blue line → fast RSI moving average that drives the colour flips Dashed 70/30 lines → classic OB/OS zones Background bands → soft purple in OB, soft yellow in OS to mark exhaustion areas How to read it: Yellow & rising → momentum shifting bullish; pullbacks into yellow OS band can be accumulation zones Purple & falling → momentum shifting bearish; pushes into purple OB band can be distribution/sell zones Hard colour flips (yellow ↔ purple) mark trend regime changes, not minor RSI noise Divergence mode (on/off) The divergence engine scans RSI and price pivot structure: Bullish divergence (yellow) → price lower low + RSI higher low Bearish divergence (purple) → price higher high + RSI lower high Lines and tags appear only where a meaningful disagreement between price and RSI exists, giving early context for potential reversals or fade setups. Together, the momentum colours + optional divergence mapping give a far clearer market read than a standard RSI, with zero clutter and no guesswork.
Chỉ báo Pine Script®
của Vectorcoresai
MorphWave Bands [JOAT]MorphWave Bands - Adaptive Volatility Envelope System MorphWave Bands create a dynamic price envelope that automatically adjusts its width based on current market conditions. Unlike static Bollinger Bands, this indicator blends ATR and standard deviation with an efficiency ratio to expand during trending conditions and contract during consolidation. What This Indicator Does Plots adaptive upper and lower bands around a customizable moving average basis Automatically adjusts band width using a blend of ATR and standard deviation Detects volatility squeezes when bands contract to historical lows Highlights breakouts when price moves beyond the bands Provides squeeze alerts for anticipating volatility expansion Adaptive Mechanism The bands adapt through a multi-step process: // Blend ATR and Standard Deviation blendedVol = useAtrBlend ? (atrVal * 0.6 + stdVal * 0.4) : stdVal // Normalize volatility to its historical range volNorm = (blendedVol - volLow) / (volHigh - volLow) // Create adaptive multiplier adaptMult = baseMult * (0.5 + volNorm * adaptSens) This creates bands that respond to market regime changes while maintaining stability. Squeeze Detection A squeeze is identified when band width drops below a specified percentile of its historical range: Background highlighting indicates active squeeze conditions Low percentile readings suggest compressed volatility Squeeze exits often precede directional moves Inputs Overview Band Length — Period for basis calculation (default: 20) Base Multiplier — Starting band width multiplier (default: 2.0) MA Type — Choose from SMA, EMA, WMA, VWMA, or HMA Adaptation Lookback — Historical period for normalization (default: 50) Adaptation Sensitivity — How much bands respond to volatility changes Squeeze Threshold — Percentile below which squeeze is detected Dashboard Information Current trend direction relative to basis and bands Band width percentage Squeeze status (Active or None) Efficiency ratio Current adaptive multiplier value How to Use It Look for squeeze conditions as potential precursors to breakouts Use band touches as dynamic support/resistance references Monitor breakout signals when price closes beyond bands Combine with momentum indicators for directional confirmation Alerts Upper/Lower Breakout — Price exceeds band boundaries Squeeze Entry/Exit — Volatility compression begins or ends Basis Crosses — Price crosses the center line This indicator is provided for educational purposes. It does not constitute financial advice. — Made with passion by officialjackofalltrades
Chỉ báo Pine Script®
của officialjackofalltrades
DeM Trend Bias Strength with Alerts (RB Trading)This tool is built to help users understand trend direction, exhaustion, and momentum shifts on the daily timeframe. It highlights when a market is transitioning from weakness to strength or strength to weakness by displaying color-coded bias bars. The script does not forecast future outcomes and should be used as an analytical aid. Intended Usage • Timeframe: Daily • Instruments: Works on most FX pairs and liquid markets • Style: Trend and bias evaluation • Purpose: Identify early signs of momentum recovery within ongoing trends How It Works Bias Rotation Engine The script measures directional pressure and smooths it into a bar display that changes color as conditions shift. • Green bars show rising strength conditions • Red bars show declining strength conditions • Transitional periods often appear near market turning points and consolidation zones This helps users visually separate healthy directional trends from weakening phases. Trend Alignment Filter The bars are designed to be interpreted alongside moving averages or broader trend tools. When the bars turn higher while price respects an upward structure, it often supports continuation themes. When the bars weaken during downward phases, it highlights potential areas where the trend retains control. Identifying Exhaustion and Recovery Repeated cycles in the bar display can highlight areas where: • Downside pressure is fading before an upswing • Upside pressure is fading before a pullback • Consolidation is forming before a breakout These transitions tend to align with moments shown in the image where the arrows mark bias shifts occurring before price acceleration. How to Use It • Wait for a clear color rotation before making any decisions • Confirm with the daily trend and price structure • Avoid using the tool by itself for entries • Combine with support and resistance, moving averages, and candle structure • Not intended for scalping or intraday signals Why Daily Chart Works Best The daily timeframe smooths out noise and gives the strength bars enough data to reveal genuine trend transitions. Higher timeframes also reduce false rotations that are common in lower timeframes. Notes The script does not predict or guarantee price movement. It processes historical inputs to help the user understand directional conditions. Each trader should apply their own risk plan and confirm levels before acting on any idea.
Chỉ báo Pine Script®
của RB_T
Luxy VWAP Magic - MTF Projection EngineThis indicator transforms the classic VWAP into a comprehensive trading system. Instead of switching between multiple indicators, you get everything in one place: multi-timeframe analysis, statistical bands, momentum detection, volume profiling, session tracking, and divergence signals. What Makes This Different Traditional VWAP indicators show a single line. This tool treats VWAP as a foundation for complete market analysis. The indicator automatically detects your asset type (stocks, crypto, forex, futures) and adjusts its behavior accordingly. Crypto traders get 24/7 session tracking. Stock traders get proper market hours handling. Everyone gets institutional-grade analytics. Anchor Period Options The anchor period determines when VWAP resets and recalculates. You have three categories of options: Time-Based Anchors: Session - Resets at market open. Best for intraday stock trading where you want fresh VWAP each day. Day - Resets at midnight UTC. Standard option for most traders. Week / Month / Quarter / Year - Longer reset periods for swing traders and position traders who want broader context. Rolling Window Anchors: Rolling 5D - A sliding 5-day window that never resets. Solves the Monday problem where weekly VWAP equals daily VWAP on first day of week. Rolling 21D - Approximately one month of trading data in continuous calculation. Excellent for crypto and forex markets that trade 24/7 without clear session breaks. Event-Based Anchors: Dividends - Resets on ex-dividend dates. Track institutional cost basis from dividend events. Splits - Resets on stock split dates. Useful for analyzing post-split trading behavior. Earnings - Resets on earnings report dates. See where volume-weighted trading occurred since last quarterly report. Standard Deviation Bands Three sets of bands surround the main VWAP line: Band 1 (Aqua) - Plus and minus one standard deviation. Approximately 68% of price action occurs within this range under normal distribution. Touches suggest minor extension. Band 2 (Fuchsia) - Plus and minus two standard deviations. Only 5% of trading should occur outside this range statistically. Touches here indicate significant overextension and high probability of mean reversion. Band 3 (Purple) - Plus and minus three standard deviations. Touches are rare (0.3% probability) and represent extreme conditions. Often marks climax moves or panic selling/buying. Each band can be toggled independently. Most traders show Band 1 by default and add Band 2 and 3 for specific setups or volatile instruments. Multi-Timeframe VWAP System The MTF section plots previous period VWAPs as horizontal support and resistance levels: Daily VWAP - Previous day's final VWAP value. Key intraday reference level. Weekly VWAP - Previous week's final VWAP. Important for swing traders. Monthly VWAP - Previous month's final VWAP. Institutional benchmark level. Quarterly VWAP - Previous quarter's final VWAP. Major support/resistance for position traders. Previous Day VWAP - Yesterday's closing VWAP specifically, separate from current daily calculation. The Confluence Zone percentage setting determines how close multiple VWAPs must be to trigger a confluence alert. When two or more timeframe VWAPs converge within this threshold, you get a high-probability support/resistance zone. Session VWAPs for Global Markets For forex, crypto, and futures traders who operate in 24/7 markets, the indicator tracks three major global sessions: Asia Session - UTC 21:00 to 08:00. Gold colored line. Typically lower volatility, range-bound action that sets overnight levels. London Session - UTC 08:00 to 17:00. Orange colored line. Often determines daily direction with high volume European participation. New York Session - UTC 13:00 to 22:00. Blue colored line. Highest volume session globally. Sharp directional moves common. Previous session VWAP values display as horizontal lines when each session closes, acting as intraday support and resistance. The table shows which sessions are currently active with checkmarks. On-Chart Labels and Signals The indicator plots several types of labels directly on price action when significant events occur: Volume Spike Labels Fire when current bar volume exceeds configurable thresholds relative to both the previous bar and the 20-bar average. Default settings require 300% of previous bar AND 200% of average volume. Green labels indicate bullish candles. Red labels indicate bearish candles. These spikes often mark institutional entry points. Momentum Shift Labels Appear when VWAP acceleration changes direction. The Slowing label warns when an active trend loses steam, often preceding reversal. The Accelerating label confirms trend continuation or potential bottom during downtrends. Filters available to show only reversal signals in existing trends. VWAP Squeeze Labels Detect when standard deviation bands contract relative to ATR (Average True Range). Low volatility compression often precedes explosive breakout moves. When the squeeze fires (releases), a label appears with directional prediction based on VWAP slope. Divergence Labels Mark price/volume divergences using CVD (Cumulative Volume Delta) analysis: Bullish divergence: Price makes lower low, but CVD makes higher low. Hidden accumulation despite price weakness. Bearish divergence: Price makes higher high, but CVD makes lower high. Hidden distribution despite price strength. Dynamic VWAP Coloring The main VWAP line changes color based on its slope direction: Green - VWAP is rising. Institutional buying pressure. Volume-weighted price increasing. Red - VWAP is falling. Institutional selling pressure. Volume-weighted price decreasing. Gray - VWAP is flat. Consolidation or balance between buyers and sellers. This coloring can be disabled for a static blue line if you prefer cleaner visuals. The VWAP label next to the line shows the current trend direction and delta percentage. Calculated Projection Cone One of the most powerful features is the Calculated Projection Cone. Unlike traditional extrapolation methods that simply extend a trend line forward, this system analyzes what actually happened in similar market conditions throughout the chart's history. How It Works: The system classifies each bar into one of 27 unique market states: Z-Score Level - LOW (oversold), MID (fair value), or HIGH (overbought) based on configurable thresholds Trend Direction - DOWN, FLAT, or UP based on VWAP slope Volume Profile - LOW (below 80%), NORMAL (80-150%), or HIGH (above 150%) relative volume When you look at the current bar, the indicator: 1. Identifies the current market state (e.g., LOW Z-Score + UP Trend + HIGH Volume) 2. Searches through all historical bars on the chart that had the same state 3. Calculates what happened in those bars X bars later (where X is your projection horizon) 4. Shows you the probability of up/down and the average move size Visual Elements: Probability Cone - Colored green (bullish probability above 55%), red (bearish below 45%), or gold (neutral). The cone width represents the historical range of outcomes (roughly the 20th to 80th percentile). Center Line - Shows the average expected price based on historical outcomes in similar conditions. Probability Label - Displays direction probability and average move. Example: "67% UP (+0.8%)" means 67% of similar past cases moved up, averaging 0.8% gain. Fallback System: When the exact 27-state match has insufficient historical data: First fallback: Uses Z-Score plus Trend only (9 broader states, ignoring volume) Second fallback: Uses Z-Score only (3 states) When fallback is active, confidence automatically adjusts Settings: Projection Horizon - How many bars forward to analyze outcomes (5, 10, 15, or 20 bars, default 10) Lookback Period - Historical data window in days (30-252, default 60) Minimum Samples - Cases needed before using fallback (5-30, default 10) Z-Score Threshold - Bucket boundary for LOW/MID/HIGH classification (1.0, 1.5, or 2.0 sigma) Cloud Transparency - Adjust visibility (50-95%) Colors - Customize bullish, bearish, and neutral cone colors Confidence Levels: HIGH - 30 or more similar historical cases found MEDIUM - 15-29 similar cases LOW - Fewer than 15 cases (more uncertainty) IMPORTANT DISCLAIMER: The Calculated Projection is based on past patterns only. It is NOT a price prediction or financial advice. Similar market states in the past do not guarantee similar outcomes in the future. The probability shown is historical frequency, not a guarantee. Always combine with other analysis and never rely solely on projections for trading decisions. Alert Conditions The indicator includes over 20 pre-built alert conditions: Price vs VWAP: Price crosses above VWAP Price crosses below VWAP Band Touches: Price touches plus or minus one sigma band Price touches plus or minus two sigma band (extreme) Price touches plus or minus three sigma band (very extreme) Z-Score Extremes: Z-Score crosses above plus two (overbought extreme) Z-Score crosses below minus two (oversold extreme) Momentum and Trend: Momentum slowing Momentum accelerating Trend turns bullish/bearish/neutral Volume: Volume spike detected CVD Direction: Buyers take control Sellers take control High Probability Signals: Bullish reversal signal (oversold plus accelerating momentum) Bearish reversal signal (overbought plus slowing momentum) MTF and Special: MTF confluence zone entry VWAP squeeze fired Bullish/Bearish divergence detected Any significant signal (catch-all) All signals use confirmed bar data to prevent false alerts from incomplete candles. Settings Overview Settings are organized into logical groups: VWAP Settings Anchor Period selection Show/Hide VWAP line Dynamic coloring toggle VWAP label visibility Bands Visibility Toggle each of three bands independently Info Table Show/Hide table Table position (9 options) Text size Volume spike label settings with adjustable thresholds Momentum label settings with filters Signal labels limited to 5 most recent (auto-managed) Probability engine lookback period Multi-Timeframe VWAP Enable/Disable MTF system Show MTF in table Show MTF lines on chart Individual timeframe toggles Confluence zone threshold Squeeze detection toggle Session VWAPs Enable/Disable session tracking Apply to all assets option Show session labels Divergence Detection Enable/Disable divergence Pivot lookback period Show divergence labels Calculated Projection Enable/Disable projection cone Projection horizon (5, 10, 15, or 20 bars) Lookback period in days (30-252) Minimum samples threshold Z-Score classification threshold (1.0, 1.5, or 2.0 sigma) Cloud transparency adjustment Bullish, bearish, and neutral colors The Info Table - Your Trading Dashboard The right side of your chart displays a compact table with up to twelve metrics. Row-by-Row Breakdown: Asset and Period - Shows what the indicator detected (US Stock, Crypto, Forex, etc.) and your selected anchor period. The detection happens automatically based on exchange data, so VWAP resets and calculations match your actual trading instrument. Delta Percentage - How far current price sits from VWAP, expressed as a percentage. Positive means price trades above fair value. Negative means below. Large delta values (beyond 1-2%) often precede mean reversion moves. Day traders watch this for overextension. Z-Score - Statistical deviation from VWAP measured in standard deviations. Unlike raw delta, Z-Score accounts for volatility. A 2% move in a volatile biotech stock differs from 2% in a stable utility. Z-Score normalizes this. Values beyond plus or minus two sigma occur only 5% of the time statistically. Trend Direction - Whether VWAP itself is rising, falling, or flat. Rising VWAP means the volume-weighted average price is increasing, which indicates institutional accumulation. Falling VWAP suggests distribution. This differs from price trend since it weights by volume. Momentum State - Is the trend accelerating or slowing down? This measures the rate of change in VWAP slope. When an uptrend shows slowing momentum, it often precedes reversal. Accelerating momentum in a downtrend can signal capitulation and potential bottom. Relative Volume - Current bar volume compared to the 20-bar average, shown as percentage. Values above 150% indicate above-average activity. Spikes above 200-300% often mark institutional involvement. Low volume (below 80%) warns of potential fake moves. MTF Bias - Four checkmarks or X marks showing whether price sits above or below Daily, Weekly, Monthly, and Quarterly VWAP. Four checkmarks means strong bullish alignment across all timeframes. Four X marks indicates bearish alignment. Mixed readings suggest consolidation or transition. Band Probabilities - Historical statistics showing how often price touched each standard deviation band over your lookback period. This helps you understand if mean reversion or trend following works better for your specific instrument. Session Status - Which global trading sessions are currently active (Asia, London, New York). Shows checkmarks for active sessions. Important for forex and crypto traders who need to know when major liquidity windows open and close. Divergence State - Whether the indicator detects bullish or bearish divergence between price and cumulative volume delta. Bullish divergence occurs when price makes lower lows but buying pressure (CVD) makes higher lows, suggesting hidden accumulation. Confidence Score - A weighted composite of all factors displayed as a progress bar and percentage. Combines MTF alignment, Z-Score, trend direction, volume delta, momentum, and relative volume into a single 0-100 score. Higher scores indicate stronger conviction setups. Calculated Projection - When the Projection Cone is enabled, shows the historical probability of price direction and expected move. For example: "▲ 67% (+0.8%)" means in similar market states historically, price moved up 67% of the time with an average gain of 0.8%. The system analyzes 27 unique market states based on Z-Score, Trend, and Volume conditions. Recommended Use Cases Day Trading Stocks: Use Session anchor with Band 1 visible. Watch for price returning to VWAP after morning move. Volume spikes near VWAP often mark institutional accumulation zones. Swing Trading: Use Weekly or Rolling 21D anchor. Enable MTF lines for Daily and Weekly levels. Trade pullbacks to these levels in direction of MTF bias. Crypto and Forex: Enable Session VWAPs. Use Rolling anchors to avoid artificial resets. Monitor session transitions for breakout opportunities. Mean Reversion: Focus on Z-Score reaching plus or minus two. Add Band 2 visibility. Combine with slowing momentum for highest probability reversals. Trend Following: Watch MTF bias alignment. Four checkmarks plus accelerating momentum plus high volume confirms trend continuation setups. Projection Planning: Enable the Calculated Projection to see what happened historically in similar market conditions. Use 5-10 bars for intraday setups, 15-20 bars for swing trade planning. Focus on high probability readings (above 60%) with HIGH confidence (30 or more samples). The cone shows the probable range of outcomes based on actual historical data. Combine with other factors like MTF alignment and volume for higher conviction setups. Important Notes The indicator does not repaint. MTF values use previous period's confirmed data. Rolling VWAP works best on 15-minute timeframes and above due to bar lookback requirements. Session VWAPs apply to global markets by default (forex, crypto, futures). Enable the all-assets option for stocks if desired. Volume data for forex represents tick volume, not actual traded volume. All alert conditions fire only on confirmed (closed) bars to prevent false signals. The Calculated Projection updates each bar as market state changes. This is expected behavior. The projection shows probabilities based on similar past conditions, not a fixed prediction. Q AND A Q: Does this indicator repaint? A: No. The main VWAP calculation uses standard TradingView VWAP methodology. Multi-timeframe values use previous period's confirmed data with appropriate lookahead settings. All alert signals require bar confirmation. Q: Why does my Rolling VWAP look different on 1-minute versus 15-minute charts? A: Rolling VWAP calculates across a fixed number of trading days. On very short timeframes, the bar lookback may hit TradingView limits. For best Rolling VWAP accuracy, use 15-minute or higher timeframes. Q: Can I use this on any instrument? A: Yes. The indicator automatically detects asset type and adjusts behavior. Stocks use standard market hours. Crypto uses 24/7 calculations. Forex uses tick volume. Everything adapts automatically. Q: What does the Confidence Score actually measure? A: The score combines six weighted factors: MTF alignment (25%), Z-Score position (20%), Trend direction (20%), CVD pressure (15%), Momentum state (10%), and Relative volume (10%). Higher scores indicate more factors aligned in one direction. Q: Why are Session VWAPs not showing on my stock chart? A: Session VWAPs apply to 24-hour markets by default (forex, crypto, futures). For stocks, enable the Use for All Assets option in Session VWAP settings. Q: The Divergence labels appear delayed. Is this a bug? A: Divergence detection requires pivot confirmation, which needs bars on both sides of the pivot point. The label appears at the actual pivot location (several bars back) once confirmed. This is intentional and prevents false signals. Q: Can I change the band colors? A: Yes. Each of the three bands has its own color input setting. You can customize Band 1, Band 2, and Band 3 colors to match your preferences. The defaults are Aqua, Fuchsia, and Purple. The main VWAP line color adapts dynamically based on slope direction or can be set to static blue. Q: How do I set up alerts? A: Right-click on the chart, select Add Alert, choose this indicator, and select your desired condition from the dropdown. All conditions include descriptive alert messages with relevant data. Q: What is the Probability Engine lookback period? A: This setting determines how many trading days the indicator analyzes to calculate band touch rates and mean reversion statistics. Default is 60 days (approximately 3 months). Longer periods provide more stable statistics but may miss recent behavior changes. Q: Why do I see fewer labels than expected? A: Signal labels (Volume, Momentum, Squeeze, Divergence) are limited to 5 most recent labels on the chart to keep it clean. When a new label appears, the oldest one is automatically removed. Additionally, momentum labels have several filters: check the slope multiplier setting (higher values require stronger trends) and the Only Reversal Signals option (when enabled, labels only appear for potential reversals, not trend confirmations). Q: What is the Calculated Projection and how accurate is it? A: The Calculated Projection analyzes what happened in past market conditions similar to the current state. It classifies each bar by Z-Score level, Trend direction, and Volume profile (27 unique states), then shows the historical probability of up vs down and the average move size. It is NOT a price prediction or guarantee. The probability shown is how often similar conditions led to up/down moves historically, not a future guarantee. Always use it as one input among many. Q: Why does the Projection probability change? A: The projection updates on each bar as market state changes. If Z-Score moves from LOW to MID, or trend shifts from UP to FLAT, the system looks up a different historical category. This is expected behavior. The projection shows what happened in similar past conditions to the current bar's state. Q: The Projection shows LOW confidence. What does that mean? A: Confidence levels indicate sample size: HIGH means 30 or more historical cases found, MEDIUM means 15-29 cases, LOW means fewer than 15 cases. When sample size is low, the system uses a fallback: first aggregating by Z-Score plus Trend only (ignoring volume), then by Z-Score only. LOW confidence means less statistical reliability, so weight other factors more heavily in your decision. Q: Why does the cone sometimes show 50/50 probability? A: A 50/50 reading means that in similar past market states, price moved up roughly half the time and down half the time. This indicates a neutral or balanced condition where historical patterns provide no directional edge. Consider waiting for a higher probability setup or using other analysis methods. CREDITS AND ACKNOWLEDGMENTS Methodology Foundation: VWAP (Volume Weighted Average Price) - Standard institutional benchmark calculation, widely used since the 1980s for algorithmic execution and fair value assessment Standard Deviation Bands - Statistical volatility measurement applying normal distribution principles to price deviation from mean Z-Score Analysis - Classic statistical normalization technique for comparing values across different volatility regimes Cumulative Volume Delta (CVD) - Order flow analysis concept measuring aggressive buying versus selling pressure Concept Integration: Mean reversion probability engine - Custom historical statistics tracking for band touch rates Momentum acceleration detection - Second derivative analysis of VWAP slope changes VWAP Squeeze - Volatility compression concept adapted from TTM Squeeze methodology applied to VWAP bands versus ATR Confidence scoring system - Weighted composite scoring combining multiple technical factors Calculated Projection Cone - Probability-based projection using 27-state market classification (Z-Score, Trend, Volume) with historical outcome analysis and weighted fallback system All calculations use standard public domain formulas and TradingView built-in functions. No proprietary third-party code was used. For questions, feedback, or feature requests, please comment below or send a private message. Happy Trading!
Chỉ báo Pine Script®
của orenluxy
11