Bắt đầu

Đường Lên/Xuống giá cổ phiếu

Adaptive EMA (Momentum Entry & Crash Protection)This script is the result of extensive backtesting to find the perfect balance between capturing high-volume momentum and protecting capital during market crashes. It is not just a standard EMA crossover; it is a fine-tuned trend-following system designed for maximum profit margins. 🚀 KEY OPTIMIZATIONS: 1. Adaptive Logic (Auto-Switching): The script automatically detects your timeframe and applies the most effective parameters: • Intraday (≤ 4H): Uses EMA 9 & 21. This classic setup is perfect for filtering noise in short-term trading. • Swing/Long-Term (> 4H): Uses EMA 7 & 14. *CRITICAL UPDATE:* After testing, the 7/14 combination proved to offer higher profit margins than the traditional 7/21. It reacts faster to major trend reversals, allowing you to lock in profits sooner before a dump. 2. Professional Visuals: • Fast Line (Gold - 1px): Represents the immediate momentum. • Slow Line (Deep Blue - 2px): Represents the baseline trend. • Glow Effect: A subtle white border ensures the lines remain visible even on dark charts. • Clean Chart Policy: Gradient background signals are included but *disabled by default* to keep your workspace clutter-free. You can enable them in the settings if you prefer visual zones. 💎 HOW TO TRADE: • Entry (Pump): When the Gold line crosses ABOVE the Blue line. This indicates a surge in volume and upward momentum. • Exit (Protection): When the Gold line crosses BELOW the Blue line. This is your signal to exit and protect your gains before the price collapses. No manual configuration is needed. Just add it to your chart, and it adapts instantly.
Chỉ báo Pine Script®
của andrewnguyen93
Relative Strength vs S&P 500 (SPX/ES) Relative Strength vs S&P 500 This indicator measures the relative performance of an asset compared to the S&P 500, helping traders and investors identify whether an asset is outperforming or underperforming the broader market. The calculation is based on a price ratio between the selected asset and the S&P 500, optionally normalized to a base value (100) for easier interpretation. How to read it: Above the baseline (100) → the asset is outperforming the S&P 500 Below the baseline (100) → the asset is underperforming the S&P 500 Rising line → strengthening relative performance Falling line → weakening relative performance Why it’s useful: Helps focus on market leaders, not just assets that “look cheap” Filters trades and investments in the direction of relative strength Useful for swing trading, long-term investing, and portfolio allocation Widely used in institutional and professional asset management This indicator is best used as a trend and selection filter, in combination with technical setups (support/resistance, VWAP, structure).
Chỉ báo Pine Script®
của egu26
MA200 Parallel ChannelDynamic MA100 Parallel Bands – Precision S/R Levels This indicator builds a clean, parallel channel around the 100-period moving average using a fixed ±4 offset. Because the offset mirrors the short-term MA1 fluctuations, the channel reveals highly accurate support and resistance zones that react instantly to market micro-structure. Unlike Bollinger Bands—which expand with volatility—this tool stays perfectly parallel and trend-aligned, making breakouts and pullbacks incredibly easy to spot. How it works: Centerline: 100-period moving average (MA100) Upper Band: MA100 + 4 Lower Band: MA100 – 4 MA1 used as a sensitivity reference for micro-trend behavior Parallel structure ensures stable, predictable levels Why it’s powerful: The ±4 channel creates extremely precise S/R zones Price respecting the lower band = dynamic support Price rejecting the upper band = dynamic resistance A clean break above or below the bands highlights strong momentum shifts Perfect for intraday traders needing structure without noise Perfect for: Identifying high-probability bounce levels Spotting early trend continuation Confirming MA100 breakouts Filtering weak signals and fake volatility spikes If you want razor-sharp support & resistance levels that stay consistent across all timeframes, these MA100 parallel bands deliver exceptional clarity.
Chỉ báo Pine Script®
của S_P_X_500
XAUUSD Multi-Timeframe Supertrend Alert v2**Indicator Overview: XAUUSD Multi-Timeframe Supertrend Alert v2** **Core Components:** 1. **Multi-Timeframe Supertrend System** - Two Supertrend indicators (ST1 & ST2) with customizable timeframes - ST1 typically set to Daily, ST2 to Weekly as main trend - Visualized with distinct colors and background fills 2. **Customizable SMA** - Adjustable period and timeframe - Plotted as blue line for additional trend reference 3. **Neutral Zone System** - Creates a neutral line offset from ST1 by customizable tick distance - Yellow dashed line that adjusts based on ST1 trend direction - **Alert Conditions:** - **Test Buy Zone**: Both ST1 & ST2 in uptrend AND price enters neutral zone above ST1 - **Test Sell Zone**: Both ST1 & ST2 in downtrend AND price enters neutral zone below ST1 4. **Distance Lines from ST2** - Upper/lower lines at customizable tick distance from ST2 - Purple dashed lines with touch alerts **Trading Signals:** - **Bullish Signal**: Price above ST2 but below ST1 (potential buy) - **Bearish Signal**: Price below ST2 but above ST1 (potential sell) - **Neutral Zone Alerts**: Price enters defined zone when both trends align - **Line Touch Alerts**: Price touches distance lines from ST2 **Alert System:** - Limited to 3 consecutive alerts per signal type - Visual markers (triangles, diamonds, circles) - Background coloring for signal zones - Separate alert conditions for each signal type **Visual Features:** - Candles colored green/red based on signals - Clear trend visualization with colored backgrounds - Real-time alert markers without information table clutter This indicator provides multi-timeframe trend analysis with precise entry zone detection and comprehensive alert system for XAUUSD trading. SAM89 M15, ST1 (5:10) M5, ST2 ( 1,5:20) H1, Test Buy Sell 7000, Line 15000
Chỉ báo Pine Script®
của Debayako
Weighted Sector ADD (sign-weighted)What it is A true, cap-weighted advances/declines (ADD) proxy for the S&P 500 using sector ETFs. Each sector contributes +1 if it’s up on the bar, −1 if it’s down, 0 if flat. Those signals are then weighted by your sector weights (auto-normalized to 100%) and summed into a single breadth line. The result is a fast, low-noise read of how much of the S&P (by sector weight) is advancing vs. declining right now. - Tracks participation, not price magnitude—perfect for spotting “broad vs. narrow” moves - Heavily weighted sectors (e.g., Tech) matter proportionally more, reflecting real index impact - Simple scale: ~−1 to +1 (all weight down → all weight up) Chart Elements - Green/Red Columns – “Weighted ADD”: Current bar’s weighted breadth (sign-based by default) - Blue Line – “Weighted MA”: SMA of the weighted ADD (regime filter) - Zero/Guide Lines (optional): 0.0, ±0.2 (mild), ±0.6 (strong) - Labels (optional): Text markers at those guide levels - Advancing Weight % (optional): Label showing ((ADD+1)/2)*100 → share of total sector weight advancing How to Read (Quick Guide) - +0.60 to +1.00 → Broad, one-sided risk-on (most sector weight advancing) - +0.20 to +0.60 → Moderate, supportive breadth - −0.20 to +0.20 → Mixed/choppy; rotation - −0.60 to −1.00 → Broad, one-sided risk-off - MA above/below zero → Simple regime indicator; zero-crosses could be potential alert triggers - Divergence: Strong price move with a weak/flat ADD could potentially warn of narrow participation Inputs & settings Calculation - Use returns instead of up/down sign? OFF (default): true weighted participation (+1/−1/0) ON: weighted sector returns (winsor-capped). Use if you want magnitude, not just direction - Winsor cap (returns mode): Caps per-sector contribution in returns mode (e.g., 0.02 = ±2%) - Smoothing MA length: SMA period for the blue “Weighted MA” line - Source timeframe: Compute signals on another TF (e.g., “60”) but plot on your chart TF Visibility - Show Weighted ADD (bars): Toggle the green/red columns - Show Weighted ADD MA: Toggle the blue SMA line - Show Zero Line (0): Toggle the 0.0 reference line - Show ±0.2 / ±0.6 guide lines: Toggle the helper levels - Show guide labels: Draw small text labels at 0, ±0.2, ±0.6 - Guide label offset (bars left): Move labels left if they overlap the right edge values - Show Advancing Weight % label: Toggle the % of sector weight currently advancing Sector Symbols (ETF proxies) - XLK, XLY, XLF, XLV, XLC, XLI, XLP, XLE, XLB, XLU, XLRE: Defaults to the SPDR sector ETFs. You can swap for alternative proxies if desired. Sector Weights (auto-normalize) - Weight inputs for each sector (e.g., Tech 0.30, Financials 0.13…). These auto-normalize to 1.0 so you can paste rough numbers; the script scales them. - Keep weights fresh. GICS sector weights drift; update periodically (e.g., quarterly). Alerts included - “Weighted ADD crossed above 0” - “Weighted ADD crossed below 0” Version v1.0 – Initial release (weighted sign-based ADD + SMA, zero/guide lines & labels, Adv % label, alerts).
Chỉ báo Pine Script®
của Bubashue5
S&P 500 Weighted Advance Decline LineS&P 500 Weighted Advance Decline Line Indicator Overview This indicator creates a market cap weighted advance/decline line for the S&P 500 that tracks breadth based on actual index weights rather than treating all stocks equally. By weighting each stock's contribution according to its true S&P 500 impact, it provides more accurate market breadth analysis and better insights into underlying market strength and potential turning points. Key Features Market Cap Weighted: Each stock contributes based on its actual S&P 500 weight Top 40 Stocks: Covers ~51% of the index with the largest companies (limited by TradingView's 40 security call maximum for Premium accounts) Real-Time Updates: Cumulative line shows long-term breadth trends Visual Indicators: Background coloring, moving average option, and data table Stock Coverage Sector Breakdown: Technology (29.8%) - Dominates the coverage as expected Financials (5.8%) - Major banking and payment companies Consumer/Retail (3.7%) - Consumer staples and retail giants Healthcare (3.2%) - Pharma and healthcare services Communication (1.97%) - Telecom and tech services Energy (1.35%) - Oil and gas majors Industrial (0.9%) - Aerospace and industrial equipment Other Sectors (4.6%) - Miscellaneous including software and payments Includes the 40 largest S&P 500 companies by weight, featuring: Tech Leaders (29.8%): AAPL (7.0%), MSFT (6.5%), NVDA (4.5%), AMZN (3.5%), META (2.5%), GOOGL/GOOG (3.8%), AVGO (1.5%), ORCL (1.22%), AMD (0.51%), plus others Financials (5.8%): BRK.B (1.8%), JPM (1.2%), V (1.0%), MA (0.8%), BAC (0.63%), WFC (0.46%) Healthcare (3.2%): LLY (1.2%), UNH (1.2%), JNJ (1.1%), ABBV (0.8%), PG (0.9%) Consumer/Retail (3.7%): WMT (0.8%), HD (0.8%), COST (0.7%), KO (0.6%), PEP (0.6%), NKE (0.4%) Communication (1.97%): TMUS (0.47%), CSCO (0.47%), DIS (0.5%), CRM (0.5%) Energy** (1.35%): XOM (0.8%), CVX (0.55%) Industrial** (0.9%): GE (0.5%), BA (0.4%) Other Sectors (4.6%): PLTR (0.65%), ADBE (0.6%), PYPL (0.3%), plus others How to Interpret Trend Signals Rising A/D Line: Broad market strength, more weighted buying than selling Falling A/D Line: Market weakness, more weighted selling pressure Flat A/D Line: Balanced market conditions Divergence Analysis Bullish Divergence: S&P 500 makes new lows but A/D Line holds higher Bearish Divergence: S&P 500 makes new highs but A/D Line fails to confirm Confirmation Strong trends occur when both price and A/D Line move in the same direction Weak trends show when price moves but breadth doesn't follow Settings Lookback Period: Days for advance/decline comparison (default: 1) Show Moving Average: Optional trend smoothing MA Length: Moving average period (default: 20) Limitations Covers ~51% of S&P 500 (not complete market breadth) Optimized for TradingView Premium accounts (40 security limit) Heavy weighting toward mega-cap technology stocks Dependent on real-time data quality
Chỉ báo Pine Script®
của Cruiser
1
NYSE Advancing Issues & Volume RatiosOverview This comprehensive market breadth indicator tracks two essential NYSE ratios that provide deep insights into market sentiment and internal strength: NYSE Advancing Issues Ratio NYSE Advancing Volume Ratio Dual Ratio Analysis Issues Ratio: Measures the percentage of NYSE stocks advancing vs. total issues Volume Ratio: Measures the percentage of NYSE volume flowing into advancing stocks Both ratios displayed as easy-to-read percentages (0-100%) Customizable Display Options Toggle each ratio on/off independently Choose from multiple moving average types (SMA, EMA, WMA) Adjustable moving average periods Custom color schemes for better visualization Reference Levels 50% Line: Market neutral point (gray dashed) 10% Line: Extremely bearish breadth (red dotted) 90% Line: Extremely bullish breadth (green dotted) Optional background highlighting for extreme readings Smart Alerts Cross above/below 50% (neutral) for both ratios Extreme readings: Above 90% (strong bullish) and below 10% (strong bearish) Real-time notifications for key market breadth shifts 📈 How to Interpret Bullish Signals Above 50%: More stocks/volume advancing than declining Above 90%: Extremely strong market breadth (rare occurrence) Divergence: Price making new highs while breadth weakens (potential warning) Market Timing Extreme readings (10%/90%) often coincide with market turning points Breadth thrusts from extreme levels can signal powerful moves Use with other technical indicators for enhanced timing
Chỉ báo Pine Script®
của alex_yeo
1
SD Bands Filtered Signals### SD Bands Filtered Signals: Reversion & Volatility Scanner **Core Description:** The SD Bands Filtered Signals is a tool developed to help traders identify more accurate buy and sell signals in sideways markets, or during periods of low price movement. It utilizes the principles of Standard Deviation (SD) and a Moving Average (MA), with a unique 'signal filtering' system added to reduce unnecessary noise. **Key Features:** * **SD Bands:** Creates upper and lower bands to define price volatility zones, providing a clear overview of market conditions. * **Intelligent Reversal Signals:** Generates specially filtered Buy/Sell signals for a 'Reversion to the Mean' strategy. These signals appear only when the market has low volatility and the price touches the SD Bands. * **Advanced Signal Filtering System:** Uses a **`Cooldown Bars`** variable to set a rest period between signals. This prevents repetitive arrows in the same zone, helping you find the best signal at the most suitable point. * **Fully Customizable:** You can adjust the **`Length`**, **`Multiplier`**, **`Sideways Threshold`**, and **`Cooldown Bars`** to fit your trading style and asset of choice. **How to Use:** * **Buy Signal (Green Arrow Up):** Look for this signal when the market is sideways and the price moves down to touch the lower band (SD Low). * **Sell Signal (Red Arrow Down):** Look for this signal when the market is sideways and the price moves up to touch the upper band (SD High). * **Customization:** You can adjust the **`Cooldown Bars`** value to control the number of arrows. If you want more accurate but fewer signals, increase this value. **Disclaimer:** * This indicator is an **analytical tool only** and is not a 100% guarantee of profit. * It should be used in conjunction with other forms of analysis, such as candlestick patterns, trading volume, and proper risk management. ไทย ชื่ออินดิเคเตอร์ "SD Bands Filtered Signals: Reversion & Volatility Scanner" คำอธิบายหลัก: อินดิเคเตอร์ SD Bands Filtered Signals เป็นเครื่องมือที่ถูกพัฒนาขึ้นเพื่อช่วยให้นักเทรดสามารถระบุสัญญาณซื้อ (Buy) และขาย (Sell) ที่แม่นยำขึ้นในตลาดแบบ Sideways หรือช่วงที่ราคาเคลื่อนที่ในกรอบแคบๆ โดยใช้หลักการของ Standard Deviation (SD) และ Moving Average (MA) และเพิ่มระบบ 'กรองสัญญาณ' ที่เป็นเอกลักษณ์เพื่อลดสัญญาณรบกวน (Noise) ที่ไม่จำเป็นออกไป คุณสมบัติเด่น: * SD Bands: สร้างเส้นขอบบนและล่างเพื่อระบุโซนความผันผวนของราคา ทำให้เห็นภาพรวมของตลาดได้ง่าย * สัญญาณ Reversal อัจฉริยะ: สร้างสัญญาณ Buy/Sell ที่ถูกคัดกรองมาเป็นพิเศษสำหรับกลยุทธ์การกลับตัว (Reversion to the Mean) โดยจะปรากฏเฉพาะเมื่อตลาดมีความผันผวนต่ำและราคาแตะขอบของ SD Bands * ระบบกรองสัญญาณขั้นสูง: ใช้ตัวแปร Cooldown Bars เพื่อกำหนดระยะเวลาพักสัญญาณ ทำให้ไม่เกิดลูกศรซ้ำๆ ในโซนเดียวกัน และช่วยให้คุณได้สัญญาณที่ดีที่สุดในจุดที่เหมาะสมที่สุด * ปรับแต่งได้เต็มที่: คุณสามารถปรับค่า Length, Multiplier, Sideways Threshold และ Cooldown Bars เพื่อให้เข้ากับสไตล์การเทรดและคู่สินทรัพย์ที่คุณสนใจ วิธีการใช้งาน: * สัญญาณ Buy (ลูกศรสีเขียวขึ้น): มองหาสัญญาณนี้เมื่อตลาดอยู่ในช่วง Sideways และราคาวิ่งลงมาแตะเส้นขอบล่าง (SD Low) * สัญญาณ Sell (ลูกศรสีแดงลง): มองหาสัญญาณนี้เมื่อตลาดอยู่ในช่วง Sideways และราคาวิ่งขึ้นไปแตะเส้นขอบบน (SD High) * การปรับแต่ง: คุณสามารถปรับค่า Cooldown Bars เพื่อให้ได้จำนวนลูกศรที่ต้องการ หากต้องการสัญญาณที่แม่นยำขึ้นแต่จำนวนน้อยลง ให้เพิ่มค่านี้ให้สูงขึ้น ข้อควรระวัง: * อินดิเคเตอร์นี้เป็นเพียงเครื่องมือวิเคราะห์ ไม่ใช่สัญญาณที่การันตีผลกำไร 100% * ควรใช้ประกอบกับการวิเคราะห์อื่นๆ เช่น รูปแบบแท่งเทียน, ปริมาณการซื้อขาย (Volume) และการจัดการความเสี่ยงที่เหมาะสม
Chỉ báo Pine Script®
của Mr-7TRILL
Turtle Trading System + ATR Trailing StopIndicator Description: Turtle ATR Trailing Stop The **Turtle ATR Trailing Stop** is a technical indicator designed to enhance the classic Turtle Trading System by incorporating a dynamic trailing stop based on the Average True Range (ATR). This indicator is ideal for traders seeking to manage risk and lock in profits on both long and short positions in trending markets. Key Features: - Turtle Trading Levels: Calculates the 20-day highest high and lowest low to identify potential breakout points, a core principle of the Turtle Trading System. - ATR-Based Trailing Stop: Utilizes a trailing stop that adjusts dynamically based on a multiple of the ATR (default multiplier: 2.0), providing a volatility-adjusted exit mechanism. - Position Flexibility: Supports both long and short positions, with the trailing stop positioned below the highest price for long trades and above the lowest price for short trades. - Smooth Updates: The trailing stop updates on each bar, ensuring a more responsive adjustment to price movements, rather than only on new highs or lows. - Reset Mechanism: Automatically resets the trailing stop when the price deviates significantly (configurable threshold, default 0.1%), adapting to major trend reversals. - Alerts: Includes customizable alerts that trigger when the price reaches the trailing stop level, notifying traders of potential exit points. - Debugging Tools: Features an on-chart debug table displaying ATR, Close, Highest Price, Lowest Price, Potential Stop, and Trailing Stop values for real-time analysis. How It Works: - For **Long Positions**: The trailing stop starts below the initial close price (minus 2*ATR) and moves up as the highest price increases, locking in profits while trailing at a fixed ATR distance. - For **Short Positions**: The trailing stop starts above the initial close price (plus 2*ATR) and moves down as the lowest price decreases, protecting against upward price movements. - The stop resets if the price falls (for long) or rises (for short) beyond the set threshold, ensuring adaptability to new market conditions. Customization: - Period Settings: Adjust the length for highs/lows (default 20) and ATR period (default 14). - ATR Multiplier: Modify the distance of the trailing stop (default 2.0). - Reset Threshold: Fine-tune the percentage at which the stop resets (default 0.1%). - Position Type: Switch between "Long" and "Short" modes via input settings. Usage: Apply this indicator to any chart in TradingView, set your preferred parameters, and monitor the trailing stop line (yellow) alongside the Turtle highs (red) and lows (blue). Use the debug table to validate calculations and set alerts to stay informed of stop triggers. This indicator combines the trend-following strength of the Turtle System with a flexible, ATR-based stop-loss strategy, making it a powerful tool for both manual and automated trading strategies.
Chỉ báo Pine Script®
của paulmar-vs
1
Niveaux Dealers + Previous M W D📊 TradingView Script – Dealers Levels & Previous D/W/M 🔹 General Purpose: This advanced script provides a clear view of key market levels used by professional traders for scalping, day trading, and technical analysis. It combines manual levels (Dealer) set by the user with automated levels based on the previous day, week, and month’s highs and lows. ⸻ 🧩 1. Dealers Levels Module (Manual) ✅ Features: • Displays 28 customizable levels, grouped into 4 categories: • Maxima: Buyer Control, Max Day, Max Event, Max Extreme • Minima: Seller Control, Min Day, Min Event, Min Extreme • Call Resistance: 10 user-defined levels • Pull Support: 10 user-defined levels 🎨 Customization: • Each level’s value is manually entered • Line color, style, and thickness can be customized • Display includes transparent labels with a clean design 🔧 Options: • Line extension configurable: • To the left: from 1 to 499 bars • To the right: from 1 to 100 bars • Label display can be toggled on/off ⸻ 🧩 2. Previous Daily / Weekly / Monthly Levels Module (Automatic) ✅ Features: • Automatically detects and plots: • Previous Daily High / Low • Previous Weekly High / Low • Previous Monthly High / Low 🎯 Technical Details: • Accurate calculation based on closed periods • Dynamically extended lines (past and future projection) • Labels aligned with the right-hand extension of each line 🎨 Customization: • Each level has configurable color, line style, and thickness • Labels use rectangle style with transparent background ⸻ ⚙ Global Script Settings: • Toggle display of labels (✔/❌) • Configurable left extension (1–499) and right extension (1–100) • Settings panel organized into groups for clarity and ease of use ⸻ 💡 Usefulness: This script provides traders with a precise map of price reaction zones, combining fixed institutional zones (Dealer levels) with dynamic historical levels (D/W/M). It’s ideal for intraday strategies on indices (e.g., Nasdaq), crypto, or forex markets.
Chỉ báo Pine Script®
của FIRST-SR
RSI Multi Alert KrafturRSI Multi Alert Kraftur Description The "RSI Multi-Level Signals" indicator is designed to help traders identify potential buy and sell opportunities based on RSI (Relative Strength Index) crossings of multiple customizable levels. Unlike traditional RSI indicators that focus on single overbought/oversold thresholds (e.g., 70/30), this script stands out by offering four distinct buy and sell levels for enhanced flexibility and precision. It plots signals directly on the price chart and provides real-time alerts when RSI crosses these levels, making it a powerful tool for spotting entry and exit points. Key Features Multi-Level RSI: Configurable buy levels (e.g., 30, 25, 20, 15) and sell levels (e.g., 70, 75, 80, 85) to capture varying degrees of overbought and oversold conditions. Visual Signals: Buy signals are marked with circles below the bars, and sell signals above the bars, each color-coded for easy identification. Real-Time Alerts: Generates alerts once per bar when RSI crosses a level, with a filter to prevent duplicate signals during oscillations. Customizable: Adjustable RSI length, timeframe, and level colors to suit different trading strategies. Recommended Usage This indicator is best used as a scanning tool for finding entry points across multiple assets. Set up alerts for your entire watchlist of coins or stocks to detect when RSI crosses the configured levels in real time. It’s particularly effective in volatile markets or for traders employing multi-timeframe analysis. Combine it with other indicators (e.g., support/resistance or trend filters) to confirm signals and improve accuracy. How to Use Apply the indicator to your chart. Customize the RSI length, timeframe, and signal levels to match your trading style. Set up alerts for the indicator and apply them to your watchlist of assets. Monitor the chart for buy (green) and sell (red) signals, or rely on alert notifications. Perfect for scalpers, swing traders, or anyone looking to automate signal detection across a portfolio!
Chỉ báo Pine Script®
của Kraftur
Auto Fibonacci LinesThis TradingView script is a modded version of the library called "VisibleChart" created by Pinecoder. This version has the option for users to change the Fibonacci lines and price labels. This makes the script user-friendly. Fibonacci extensions are a tool that traders can use to establish profit targets or estimate how far a price may travel after a retracement/pullback is finished. Extension levels are also possible areas where the price may reverse. This study automatically draws horizontal lines that are used to determine possible support and resistance levels. It's designed to automatically plot Fibonacci retracement levels on chart, aiding in technical analysis for traders. First, the highest and lowest bars on the chart are calculated. These values ​​are used for Fibonacci extensions. These values update as traders scroll or zoom their charts, this shows that it is a useful indicator that can dynamically calculate and draw visuals on visible bars only.
Chỉ báo Pine Script®
của psychoengineer
2
GapAura: Dynamic Gap [AstroHub]GapAura is a powerful indicator designed to analyze and visualize price gaps on your charts. It focuses on the key levels created by gaps between the open of the current day and the close of the previous day. The indicator connects these gap levels with trend-like lines, allowing traders to easily identify significant price movements and potential turning points in the market. GapCloud automatically differentiates between upward and downward gaps, helping traders visualize important support and resistance levels that emerge following these gaps. The lines representing these gaps behave like trend lines, providing clear and actionable insights for market analysis. Unlike traditional gap indicators, GapCloud offers a dynamic approach to gap visualization, making it easier for traders to assess the impact of price gaps on future market movement. How to Use: Gap Up: When the open of the current day is higher than the close of the previous day, GapCloud draws a line connecting these two levels. This visualizes the gap upward and helps identify the trend direction, as well as potential support zones. Gap Down: When the open of the current day is lower than the close of the previous day, the indicator draws a line that connects these levels, showing a downward gap. This can highlight potential resistance levels. The lines for each gap are connected to form continuous trend-like levels, giving traders a clear picture of market structure. These lines can also be used to identify areas of strong support or resistance, and potential turning points where the price may reverse or continue in the same direction. What Makes This Indicator Unique: GapCloud stands out by transforming gaps into trend-like lines, offering more than just a simple visualization of the gap itself. By connecting the open and close levels of the current and previous day, it allows traders to see how these price differences can act as significant support or resistance levels. These lines help traders spot market trends and potential reversals more clearly, giving them an edge in making more informed trading decisions. The ability to visualize gaps as trend lines gives traders a unique advantage in understanding market behavior. Gaps are not just seen as isolated events; they are integrated into the overall market structure and can provide critical insights into the potential price direction. In addition to this, GapCloud offers a high degree of customization. Users can adjust the thickness, style, and color of the gap lines to fit their trading preferences and style. This makes the indicator adaptable to various types of trading strategies, from short-term to long-term analysis. Key Features: Identifies and visualizes gaps between the open of the current day and the close of the previous day. Converts gap levels into trend-like lines, providing clarity and actionable insights for traders. Helps identify potential support and resistance levels based on gap locations. Fully customizable settings, including line thickness, style, and color, to suit individual trading preferences. Provides a dynamic approach to gap analysis, helping traders forecast market direction and potential reversals with greater accuracy. GapCloud is an essential tool for any trader looking to enhance their market analysis. By visualizing price gaps as connected trend lines, it simplifies the process of identifying key levels and market structure, giving traders an edge in understanding price movements and making more informed decisions.
Chỉ báo Pine Script®
của AstroHub
McClellan A-D Volume Integration ModelThe strategy integrates the McClellan A-D Oscillator with an adjustment based on the Advance/Decline (A-D) volume data. The McClellan Oscillator is calculated by taking the difference between the short-term and long-term exponential moving averages (EMAs) of the A-D line. This strategy introduces an enhancement where the A-D volume (the difference between the advancing and declining volume) is factored in to adjust the oscillator value. Inputs: • ema_short_length: The length for the short-term EMA of the A-D line. • ema_long_length: The length for the long-term EMA of the A-D line. • osc_threshold_long: The threshold below which the oscillator must drop for an entry signal to trigger. • exit_periods: The number of periods after which the position is closed. • Data Sources: • ad_advance and ad_decline are the data sources for advancing and declining issues, respectively. • vol_advance and vol_decline are the volume data for the advancing and declining issues. If volume data is unavailable, it defaults to na (Not Available), and the fallback logic ensures that the strategy continues to function. McClellan Oscillator with Volume Adjustment: • The A-D line is calculated by subtracting the declining issues from the advancing issues. Then, the volume difference is applied to this line, creating a “weighted” A-D line. • The short and long EMAs are calculated for the weighted A-D line to generate the McClellan Oscillator. Entry Condition: • The strategy looks for a reversal signal, where the oscillator falls below the threshold and then rises above it again. The condition is designed to trigger a long position when this reversal happens. Exit Condition: • The position is closed after a set number of periods (exit_periods) have passed since the entry. Plotting: • The McClellan Oscillator and the threshold are plotted on the chart for visual reference. • Entry and exit signals are highlighted with background colors to make the signals more visible. Scientific Background: The McClellan A-D Oscillator is a popular market breadth indicator developed by Sherman and Marian McClellan. It is used to gauge the underlying strength of a market by analyzing the difference between the number of advancing and declining stocks. The oscillator is typically calculated using exponential moving averages (EMAs) of the A-D line, with the idea being that crossovers of these EMAs indicate potential changes in the market’s direction. The integration of A-D volume into this model adds another layer of analysis, as volume is often considered a leading indicator of price movement. By factoring in volume, the strategy becomes more sensitive to not just the number of advancing or declining stocks but also how significant those movements are based on trading volume, as discussed in Schwager, J. D. (1999). Technical Analysis of the Financial Markets. This enhanced version aims to capture stronger and more sustainable trends in the market, helping to filter out false signals. Additionally, volume analysis is often used to confirm price movements, as described in Wyckoff, R. (1931). The Day Trading System. Therefore, incorporating the volume of advancing and declining stocks in the McClellan Oscillator offers a more robust signal for trading decisions.
Chiến lược Pine Script®
của EdgeTools
2
Cryptocurrency SentimentOverview This script focuses on calculating and visualizing the sentiment difference between LONG positions and SHORT positions for a selected cryptocurrency pair on the Bitfinex exchange. It provides a clean and clear visual representation of the sentiment, helping traders analyze market behavior. Key Features Dynamic Symbol Selection: The script automatically detects the cryptocurrency symbol from the chart (syminfo.basecurrency) and dynamically constructs the LONGS and SHORTS ticker symbols. Works seamlessly for pairs like BTCUSD, ETHUSD, and others available on Bitfinex. Sentiment Calculation: The sentiment difference is calculated as: Sentiment Difference=−1×(100− SHORTS/LONGS ×100) LONGS : The total number of long positions. SHORTS : The total number of short positions. If SHORTS is 0, the value is safely skipped to avoid division errors. Color Coding: The script visually highlights the sentiment difference: Green Line: Indicates that LONG positions are dominant (bullish sentiment). Red Line: Indicates that SHORT positions are dominant (bearish sentiment). Zero Reference Line: A gray horizontal line at 0 helps users quickly identify the transition between bullish (above zero) and bearish (below zero) sentiment. How It Works Fetching Data: The script uses request.security to fetch LONGS and SHORTS data at the current chart timeframe (timeframe.period) for the dynamically generated Bitfinex tickers. Handling Data: Missing or invalid data (NaN) is filtered out to prevent errors. Extreme spikes or irregular values are safely avoided. Visualization: The sentiment difference is plotted with dynamic color coding: Green when LONGS > SHORTS (bullish sentiment). Red when SHORTS > LONGS (bearish sentiment). Benefits Market Sentiment Insight: Helps traders quickly identify if the market is leaning towards bullish or bearish sentiment based on actual LONG and SHORT position data. Dynamic and Adaptive: Automatically adjusts to the selected cryptocurrency symbol on the chart. Clean Visualization: Focuses solely on sentiment difference with color-coded signals, making it easy to interpret. Best Use Cases Trend Confirmation: Use the sentiment difference to confirm trends during bullish or bearish moves. Market Reversals: Identify potential reversals when sentiment shifts from positive (green) to negative (red) or vice versa. Sentiment Monitoring: Monitor the overall market bias for cryptocurrencies like BTC, ETH, XRP, etc., in real-time. Sample Chart Output Above Zero → Green Line: Bullish sentiment dominates. Below Zero → Red Line: Bearish sentiment dominates. Zero Line → Transition point for shifts in sentiment.
Chỉ báo Pine Script®
của khalidovic007
Murrey Math The Murrey Math indicator is a set of horizontal price levels, calculated from an algorithm developed by stock trader T.J. Murray. The main concept behind Murrey Math is that prices tend to react and rotate at specific price levels. These levels are calculated by dividing the price range into fixed segments called "ranges", usually using a number of 8, 16, 32, 64, 128 or 256. Murrey Math levels are calculated as follows: 1. A particular price range is taken, for example, 128. 2. Divide the current price by the range (128 in this example). 3. The result is rounded to the nearest whole number. 4. Multiply that whole number by the original range (128). This results in the Murrey Math level closest to the current price. More Murrey levels are calculated and drawn by adding and subtracting multiples of the range to the initially calculated level. Traders use Murrey Math levels as areas of possible support and resistance as it is believed that prices tend to react and pivot at these levels. They are also used to identify price patterns and possible entry and exit points in trading. The Murrey Math indicator itself simply calculates and draws these horizontal levels on the price chart, allowing traders to easily visualize them and use them in their technical analysis. HOW TO USE THIS INDICATOR? To use the Murrey Math indicator effectively, here are some tips: 1. Choose the appropriate Murrey Math range : The Murrey Math range input (128 by default in the provided code) determines the spacing between the levels. Common ranges used are 8, 16, 32, 64, 128, and 256. A smaller range will give you more levels, while a larger range will give you fewer levels. Choose a range that suits the volatility and trading timeframe you're working with. 2. Identify potential support and resistance levels: The horizontal lines drawn by the indicator represent potential support and resistance levels based on the Murrey Math calculation. Prices often react or reverse at these levels, so they can be used to spot areas of interest for entries and exits. 3. Look for price reactions at the levels: Watch for price action like rejections, bounces, or breakouts at the Murrey Math levels. These reactions can signal potential trend continuation or reversal setups. 4. Trail stop-loss orders: You can place stop-loss orders just below/above the nearest Murrey Math level to manage risk if the price moves against your trade. 5. Set targets at future levels: Project potential profit targets by looking at upcoming Murrey Math levels in the direction of the trend. 7. Adjust range as needed: If prices are consistently breaking through levels without reacting, try adjusting the range input to a different value to see if it provides better levels. In which asset can this indicator perform better? The Murrey Math indicator can potentially perform well on any liquid financial asset that exhibits some degree of mean-reversion or trading range behavior. However, it may be more suitable for certain asset classes or trading timeframes than others. Here are some assets and scenarios where the Murrey Math indicator can potentially perform better: 1. Forex Markets: The foreign exchange market is known for its ranging and mean-reverting nature, especially on higher timeframes like the daily or weekly charts. The Murrey Math levels can help identify potential support and resistance levels within these trading ranges. 2. Futures Markets: Futures contracts, such as those for commodities (e.g., crude oil, gold, etc.) or equity indices, often exhibit trading ranges and mean-reversion trends. The Murrey Math indicator can be useful in identifying potential turning points within these ranges. 3. Stocks with Range-bound Behavior: Some stocks, particularly those of large-cap companies, can trade within well-defined ranges for extended periods. The Murrey Math levels can help identify the boundaries of these ranges and potential reversal points. 4. I ntraday Trading: The Murrey Math indicator may be more effective on lower timeframes (e.g., 1-hour, 30-minute, 15-minute) for intraday trading, as prices tend to respect support and resistance levels more closely within shorter time periods. 5. Trending Markets: While the Murrey Math indicator is primarily designed for range-bound markets, it can also be used in trending markets to identify potential pullback or continuation levels.
Chỉ báo Pine Script®
của AlgoriZate
4
Market Internals & InfoThis script provides various information on Market Internals and other related info. It was a part of the Daily Levels script but that script was getting very large so I decided to separate this piece of it into its own indicator. I plan on adding some additional features in the near future so stay tuned for those! The script provides customizability to show certain market internals, tickers, and even Market Profile TPO periods. Here is a summary of each setting: NASDAQ and NYSE Breadth Ratio - Ratio between Up Volume and Down Volume for NASDAQ and NYSE markets. This can help inform about the type of volume flowing in and out of these exchanges. Advance/Decline Line (ADL) The ADL focuses specifically on the number of advancing and declining stocks within an index, without considering their trading volume. Here's how the ADL works: It tracks the daily difference between the number of stocks that are up in price (advancing) and the number of stocks that are down in price (declining) within a particular index. The ADL is a cumulative measure, meaning each day's difference is added to the previous day's total. If there are more advancing stocks, the ADL goes up. If there are more declining stocks, the ADL goes down. By analyzing the ADL, investors can get a sense of how many stocks are participating in a market move. Here's what the ADL can tell you: Confirmation of Trends: When the ADL moves in the same direction as the underlying index (e.g., ADL rising with a rising index), it suggests broad participation in the trend and potentially stronger momentum. Divergence: If the ADL diverges from the index (e.g., ADL falling while the index is rising), it can be a warning sign. This suggests that fewer stocks are participating in the rally, which could indicate a weakening trend. Keep in mind: The ADL is a backward-looking indicator, reflecting past market activity. It's often used in conjunction with other technical indicators for a more complete picture. TRIN Arms Index The TRIN index, also called the Arms Index or Short-Term Trading Index, is a technical analysis tool used in the stock market to gauge market breadth and sentiment. It essentially compares the number of advancing stocks (gaining in price) to declining stocks (losing price) along with their trading volume. Here's how to interpret the TRIN: High TRIN (above 1.0): This indicates a weak market where declining stocks and their volume are dominating the market. It can be a sign of a potential downward trend. Low TRIN (below 1.0): This suggests a strong market where advancing stocks and their volume are in control. It can be a sign of a potential upward trend. TRIN around 1.0: This represents a more balanced market, where it's difficult to say which direction the market might be headed. Important points to remember about TRIN: It's a short-term indicator, primarily used for intraday trading decisions. It should be used in conjunction with other technical indicators for a more comprehensive market analysis. High or low TRIN readings don't guarantee future price movements. VIX/VXN VIX and VXN are both indexes created by the Chicago Board Options Exchange (CBOE) to measure market volatility. They differ based on the underlying index they track: VIX (Cboe Volatility Index): This is the more well-known index and is considered the "fear gauge" of the stock market. It reflects the market's expectation of volatility in the S&P 500 index over the next 30 days. VXN (Cboe Nasdaq Volatility Index): This is a counterpart to the VIX, but instead gauges volatility expectations for the Nasdaq 100 index over the coming 30 days. The tech-heavy Nasdaq can sometimes diverge from the broader market represented by the S&P 500, hence the need for a separate volatility measure. Both VIX and VXN are calculated based on the implied volatilities of options contracts listed on their respective indexes. Here's a general interpretation: High VIX/VXN: Indicates a high level of fear or uncertainty in the market, suggesting investors expect significant price fluctuations in the near future. Low VIX/VXN: Suggests a more complacent market with lower expectations of volatility. Important points to remember about VIX and VXN: They are forward-looking indicators, reflecting market sentiment about future volatility, not necessarily current market conditions. High VIX/VXN readings don't guarantee a market crash, and low readings don't guarantee smooth sailing. These indexes are often used by investors to make decisions about portfolio allocation and hedging strategies. Inside/Outside Day This provides a quick indication of it we are still trading inside or outside of yesterdays range and will show "Inside Day" or "Outside Day" based upon todays range vs. yesterday's range. Custom Ticker Choices Ability to add up to 5 other tickers that can be tracked within the table Show Market Profile TPO This only shows on timeframes less than 30m. It will show both the current TPO period and the remaining time within that period. Table Customization Provided drop downs to change the text size and also the location of the table.
Chỉ báo Pine Script®
của mcthatsme
5
Auto Fibonacci Retracement // Atilla YurtsevenOverview: This Pine Script™ is a specialized tool for traders, designed to automatically plot Fibonacci retracement levels over a user-defined date range in trading charts. It also indicates the extent of price retracement within these levels. Key Features: Date Range Customization: Users can specify the start and end dates to focus the analysis on a particular trading period. Dynamic Fibonacci Levels: The script includes various Fibonacci ratios (0.0, 0.236, 0.382, 0.5, 0.618, 0.786, 1.0), with the flexibility to enable or disable individual levels. Visual Customization: Each Fibonacci level can be customized for color and line style (solid, dotted, dashed). Labels for each level are also configurable. Retracement Measurement: The script not only draws the Fibonacci levels but also measures and displays how much the price has retraced within these levels. Extension and Additional Options: Users have options to extend the Fibonacci lines and additional features such as using close values, trend drawing, date range display, and more. Technical Insights: The script identifies high and low values within the selected time frame, assessing the market's trend direction. Within the specified date range, this script effortlessly plots the Fibonacci levels automatically, bringing clarity and precision to your market analysis as it unfolds. The tool's adaptability makes it suitable for various trading styles and chart preferences. Intended Use: This script is particularly valuable for technical analysts and traders who use Fibonacci retracements to identify potential support and resistance areas and understand the depth of market corrections or rallies. Disclaimer: This Pine Script™ is offered 'as is', without any guarantees or warranties. It is intended for informational purposes and should not be taken as investment advice. Atilla Yurtseven, the creator of this script, assumes no responsibility for any financial losses or gains that may result from its usage. Users should perform their own due diligence and consult with professional advisors before making any investment decisions. Remember to follow and comment! Trade smart, stay safe Atilla Yurtseven
Chỉ báo Pine Script®
của AtillaYurtseven
12
Deemer Breakaway Momentum ThrustBreakaway momentum is a "breadth thrust" coined by Walter Deemer in the 1970s that occurs when the ten-day total advances on the NYSE are greater than 1.97 times the ten-day total NYSE declines. This indicator calculates the ratio and plots it as a histogram. The 1.97 threshold is also plotted as a horizontal line. Anytime the histogram gets above the line Breakaway Momentum has occurred. This is a rare signal that has only happened 25 times since 1945.
Chỉ báo Pine Script®
của Amphibiantrading
13
Connors-Hayward Advance-Decline Trading PatternsThe following is an excerpt from Investment Secrets of a Hedge Fund Manager "The Connors-Hayward Advance-Decline Trading Pattern (CHADTP) is a proprietary indicator we use to identify short- and intermediate-term overbought and oversold conditions for the stock market and the S&P 500 futures market... Construction of the CHADTP indicator is simple: Add the past five day's advancing issues from the New York Stock Exchange. Add the past five day's declining issues from the NYSE. Subtract #2 from #1. Divide by five. Here are the two rules to trade CHADTP: When the five-day reading is above +400, the market is overbought; and when the five day reading is below -400, the market is oversold. Unfortunately, just because the indicator is -400 does not mean we can blindly buy the market, and just because the indicator is +400 does not mean we should be a seller of the market. Whenever we get an overbought or oversold reading, we wait for a specific price reversal before entering. When the CHADTP number is +400 or more, we will sell the market only after the S&P 500 futures trade .10 points below the previous day's low. For example, if we get a reading of +422 and today's low is 453.80 we will take a sell signal only if the market trades at 453.70 or below tomorrow. If tomorrow the market low is 454.60, and the CHADTP is above 400, we will only sell if the market trades at 454.50 or below the next day, and so on. On the buy side, if today's CHADTP number is -400 or less, we will buy only after tomorrow's S&P trades .10 points above today's high, and so on." Note from Technicus Capital: This method was created in 1995. Today, the volume and volatility of markets is much more significant and therefore the original overbought/oversold levels are no longer relevant.
Chỉ báo Pine Script®
của TechnicusCapital