Bắt đầu

Chỉ báo Độ rộng

On Balance Volume ModA/D doesnt take into account the opening price, it just sees the difference in high to close wik vs close to low wik and adds volume however if the closing price is above the opening price then arguably there was more buying action than selling so adjusting A/D formula so that if close > open then it adds to volume not subtract Effectively this becomes something in bw OBV and A/D also we need not worry about gaps, since no tradding happens in gaps, so just a gap up / gap down doesnt have any accumulation / distribution effect
Chỉ báo Pine Script®
của adityagupta104
MSSM - Multi-Session Structural Map (Precision Sweeps)MSSM – Multi-Session Structural Map (Precision Sweeps) This indicator provides a structured view of the market based on four key components: 1). Previous session levels 2). Confirmed fractal swing points 3). Volume pocket highlights 4). Non-repainting precision liquidity sweep markers It is designed to help analyze how price interacts with important reference areas and structural points. This tool does not generate signals or predictions. All information is visual and educational only. HOW THE INDICATOR WORKS PREVIOUS SESSION LEVELS The script plots the previous session’s High, Low, and Mid. These levels help observe how the current session behaves around the prior day’s range. They act as reference areas only. FRACTAL SWING MAP (NON-REPAINTING) Confirmed fractals are used to mark historical swing highs and swing lows. Since fractals confirm after a certain number of bars, the swings do not repaint once formed. These swings provide a clearer view of market structure. VOLUME POCKETS The indicator highlights areas where volume expands relative to a rolling volume average. These regions show increased participation or activity. The highlights are informational and do not imply direction. PRECISION LIQUIDITY SWEEPS (NON-REPAINTING) A sweep is tagged only when: • Price trades beyond a confirmed swing high or swing low • Price closes back inside the previous swing level • A wick rejection occurs • Volume expands relative to a recent rolling average These markers simply show where price interacted with liquidity around prior structural levels. They do not indicate a trading signal or bias. HOW TO ADD THE INDICATOR Open the Pine Editor in TradingView Search the indicator name and add to favorites. Click “Add to chart” Adjust settings as needed (fractals, sweeps, volume pockets, or session levels) HOW TO READ AND USE THE INDICATOR SESSION LEVELS Observe whether price respects, rejects, compresses around, or expands beyond the previous session high, low, or midpoint. These are observational reference levels only. FRACTALS Fractal highs and lows help visualize structural turning points. They provide a clearer picture of where liquidity may rest above or below past swing levels. VOLUME POCKETS When volume expands compared to the recent average, the candle is shaded. These areas may show increased participation, but no directional meaning is implied. PRECISION SWEEPS Sweeps highlight when price reaches beyond a prior confirmed swing level and then rejects that area with displacement. These markers identify interactions with liquidity, but they are not signals and do not forecast future outcomes. CUSTOMIZATION OPTIONS Users can adjust: • Session level visibility • Fractal sensitivity • Volume pocket threshold • Sweep sensitivity and visibility • Transparency and styling This makes the tool flexible across different symbols and timeframes. IMPORTANT NOTES AND POLICY COMPLIANCE • The indicator does not provide buy or sell signals • The indicator does not predict price or direction • All plotted elements are based on past price behavior • All components are informational only • Users should perform their own analysis and risk evaluation • Past behavior does not guarantee future performance SUMMARY MSSM provides a structured view of price by combining previous session levels, confirmed swing structure, volume expansion zones, and non-repainting sweep identification. Its purpose is to assist traders in visually analyzing market structure while staying fully aligned with TradingView’s House Rules and content policies.
Chỉ báo Pine Script®
của darshakssc
ZScore SemiConductoresZ-Score of Semiconductor Sector Volume This custom Pine Script indicator applies a Z-Score calculation to the aggregated trading volume of leading semiconductor companies. The goal is to highlight statistical extremes in sector activity that may signal unusual market behavior. 🔧 How it works - Fixed ticker list: NVDA, AVGO, TSM, AMD, ASML, MU, ARM, ON, TXN, QCOM, INTC. - Aggregate volume: The script sums the trading volume of all tickers in the list for the selected timeframe. - Z-Score calculation: - Moving average and standard deviation are computed over a configurable window (default = 50 bars). - Formula: Z= (Current Volume - Mean) / Standard Deviation Visualization: - Z-Score plotted in green. - Reference lines at 0, ±1σ, ±2σ. - Labels (triangles) mark critical signals when Z > +2 or Z < -2. 📈 Why it matters - Detects abnormal surges or drops in sector-wide volume. - Highlights potential euphoria (+2σ) or panic (-2σ) moments. - Useful as a filter for trading strategies or as a sector-level alert system. ⚠️ Disclaimer: This script is for educational purposes only and not financial advice
Chỉ báo Pine Script®
của JuanDeNogoya
NC-ALPHA INDEX [Pro Pane] - Smart Money Flow01. THE PROBLEM: MARKET CAP IS A LAGGING INDICATOR Standard crypto indices (like Coin50 or Total Market Cap) are weighted by capitalization. This is a flawed model for active traders because it prioritizes "Dino Coins"—older assets with massive supplies but very little active volume or price discovery. They are heavy, slow, and hide the real story. 02. THE SOLUTION: VOLUME-VELOCITY WEIGHTING The NC-ALPHA INDEX is designed for SMC (Smart Money Concepts) traders who need to see where the real liquidity is flowing right now. Instead of static weighting, this script dynamically adjusts the influence of each asset based on its Real-Time Dollar Volume. High Volume = High Impact: If a specific asset (e.g., SOL, HYPE, or PEPE) is attracting massive liquidity inflow, its weight in the index increases instantly. Low Volume = Low Impact: Assets with no volume ("Zombie coins") have minimal impact on the index line, preventing false signals. 03. THE "MARKET DRIVERS" BASKET The index tracks a curated basket of 10 high-velocity assets representing the current market meta: 1 - Kings: BTC, ETH 2 - Market Leaders: SOL, BNB 3 - High Beta / L1s: SUI Sector Proxies: DOGE (Memes), HYPE (DEX/Perps), AAVE (DeFi), LINK (Infra), XRP. 04. HOW TO TRADE WITH IT A. The Divergence (Trap Detector) If Bitcoin is making a Higher High (HH) at a Key Resistance, but the NC-ALPHA Index is making a Lower High (LH) or stagnating: Signal: The pump is unsupported by broad liquidity. It is likely a "Fake Pump" driven by wash trading or isolated manipulation. High probability of an SFP (Swing Failure Pattern). B. The HUD (Heads-Up Display) The dashboard on the chart shows you exactly what is moving the market. Look at the "W%" (Weight) column. Signal: If an Altcoin (like SUI or HYPE) suddenly exceeds 15-20% weight, a Sector Rotation is occurring. Stop watching BTC and focus on that asset. 05. TECHNICAL NOTES Crash Proof: Built with advanced nz() data handling to prevent the "disappearing line" bug common in composite indices. Usage Rule: For accurate calculation, use this indicator on 24/7 Crypto Charts (BTC, ETH, SOL) rather than Traditional Finance charts (VIX, SPX) to avoid weekend data gaps. Built by KheopsCrypto for the SMC Community.
Chỉ báo Pine Script®
của KheopsCrypto
mrD-Volume Profile HeatmapThis indicator combines advanced volume analysis with institutional-grade visualization techniques to provide traders with a comprehensive view of market structure and liquidity zones. WHAT MAKES THIS UNIQUE: • Proprietary bidirectional volume profiling algorithm that separates buying and selling pressure using VWAP deviation analysis, not standard volume bars • Custom heatmap visualization engine with adaptive gradient calculation based on volume-weighted price distribution across multiple timeframes • Integrated Weekly VWAP with hlc3 weighting for institutional reference levels • Dynamic POC (Point of Control) detection with fixed-height text boxes for clarity • Optimized rendering system that handles 500+ bars efficiently without lag HOW IT WORKS: The algorithm analyzes volume distribution at each price level within the lookback period, applying a proprietary weighting system that considers: 1. Volume-weighted average price (VWAP) deviation to classify volume as bullish/bearish 2. Price levels are binned into customizable rows (bins) for granular analysis 3. Volume bars extend bidirectionally: positive volume (green) extends left, negative volume (red) extends right 4. Heatmap overlay uses multi-level gradient mapping (6-color spectrum) to highlight high volume nodes 5. Weekly VWAP provides macro trend reference with session-based reset logic VOLUME PROFILE MECHANICS: • Calculates volume distribution across price levels using a grid-based binning system • Each bin accumulates volume when the price touches that level • Positive/negative classification based on VWAP position (above = bullish, below = bearish) • POC automatically identifies the price level with maximum volume concentration • Display shows volume intensity through color gradients and bar lengths HEATMAP VISUALIZATION: • Uses exponential gradient multiplier (default 1.9) for enhanced contrast • Color transitions: Dark Blue (low volume) → Cyan → Green → Yellow (high volume) • Transparency-adjusted overlays ensure chart readability • Real-time updates as new volume data arrives WEEKLY VWAP INTEGRATION: • Resets at the start of each trading week (request.security logic) • Uses hlc3 (typical price) as the volume-weighted source • Provides institutional reference level for swing traders • Yellow color (#FFEB3B) for easy identification KEY PARAMETERS: • Period: Lookback window for volume calculations (default: 500 bars) • Bins: Number of price levels for volume distribution (default: 150 rows) • Offset: Horizontal positioning of volume bars (default: 50) • Heatmap Rows: Granularity of heatmap overlay (default: 250) • POC displays actual volume numbers for transparency TRADING APPLICATIONS: → Identify high-volume nodes as support/resistance zones → Detect liquidity clusters where institutional orders concentrate → Spot low-volume areas where price may move quickly (thin zones) → Use bidirectional volume to assess buying vs selling pressure → Combine with Weekly VWAP for multi-timeframe confluence → POC levels often act as price magnets (mean reversion targets) TECHNICAL IMPLEMENTATION NOTES: • Optimized for intraday to swing timeframes (1m to Daily charts) • Volume calculations use session-based accumulation (no future data) • Box rendering is limited to 500 objects for performance • Gradient calculations use mathematical power functions for smooth transitions • VWAP calculation follows institutional standard (volume-weighted hlc3) RESTRICTIONS: This is a proprietary algorithm. Redistribution, modification, or commercial use is strictly prohibited. The logic and methods contained herein are confidential and protected intellectual property. ═══════════════════════════════════════════ DISCLAIMER & RISK WARNING This indicator is provided solely for educational and informational purposes. It is designed to help traders understand market structure, volume distribution, and price action analysis. This tool should be used as part of a comprehensive trading education program. NOT FINANCIAL ADVICE: The information and signals provided by this indicator DO NOT constitute financial advice, investment advice, trading advice, or any other sort of advice. You should not treat any of the indicators' content, outputs, or signals as such. Nothing contained in this indicator constitutes a solicitation, recommendation, endorsement, or offer to buy or sell any securities or other financial instruments in this or in any other jurisdiction. NO GUARANTEED RESULTS: Past performance is NOT indicative of future results. The historical backtesting results, volume patterns, and statistical data shown by this indicator do not guarantee future performance or success. Market conditions change constantly, and what worked in the past may not work in the future. Trading and investing involve substantial risk of loss. MARKET VOLATILITY: Financial markets are inherently volatile and unpredictable. Volume patterns, support/resistance levels, and other technical indicators can fail at any time. No indicator can predict market movements with certainty. Always use proper risk management and position sizing. By using this indicator, you acknowledge that you have read, understood, and agree to this disclaimer in its entirety. If you do not agree with any part of this disclaimer, you should not use this indicator.
Chỉ báo Pine Script®
của mrDocC
1
MAX TRADEMAX TRADE is a smart trend-following indicator designed for Forex and XAUUSD. It uses a dynamic channel with Fibonacci levels to generate clear LONG and SHORT signals on any timeframe. The script supports fixed pip SL/TP, partial take profits, break-even logic and optional EMA/RSI/ATR filters to avoid bad entries. It also tracks win rate and total percent profit in real time so you can quickly see how the strategy is performing on your backtests.
Chỉ báo Pine Script®
của sunnatillon44
Crypto Intraday Scalper [Patterns + RSI + Volume + MTF + ADX]# Guide to Reading the Indicator (CIS Pro v2) ## 1. Operational Signals (The Labels) - **GREEN Label "BUY"**: **Meaning**: Entry for a Long position. **Conditions**: Bullish candle pattern + Oversold RSI + High Volume + Bullish 1-hour trend + Sufficient Volatility. - **RED Label "SELL"**: **Meaning**: Entry for a Short position. **Conditions**: Bearish candle pattern + Overbought RSI + High Volume + Bearish 1-hour trend + Sufficient Volatility. - **No Label**: The market is in an uncertain phase, sideways movement, or filters (ADX/MTF) are blocking signals for protection. ## 2. Trend Lines (The Context) - **Gray Line (EMA 200)**: This serves as the dividing line between bullish and bearish trends. **Rule**: Seek Long positions only above the gray line; Short positions only below it. - **Red/Green Step Line (Supertrend / Trailing Stop)**: **Green (below the price)**: Strong bullish trend. Acts as dynamic support. **Red (above the price)**: Strong bearish trend. Acts as dynamic resistance. **Usage**: Use it for trade exits. If in a Long position and the line turns red, close the entire trade. ## 3. Price Levels (Targets and Supports) - **Blue/Red/Green Dots (Pivot Points)**: These are levels calculated from the previous day. The price tends to bounce at these points. Use them as final targets for taking profit. - **Orange Line (VWAP)**: This represents the "average price" for the day. If the price deviates too far, it often returns (elastic effect). - **Dashed Lines (Appear after a signal)**: **Red Dashed**: Suggested Stop Loss (based on ATR volatility). **Green Dashed**: Suggested Take Profit (quick target). ## 4. The Table (Dashboard in the Top Right) This provides reasons why you may not be receiving signals: - **Trend (Current)**: The trend on your current chart. - **Trend (MTF 60)**: The trend on the 1-hour chart. If these two conflict (e.g., Bullish vs. Bearish), no signals will appear. - **ADX Volatility**: If RED (below 20), the market is flat—no trades. If GREEN, there is sufficient movement. - **Volume Status**: Alerts if anomalous high volume is entering (High) or if conditions are calm. ## 🚀 Operational Summary - Wait for the label. - Quick Check: Is the price on the correct side of the gray line? Is the step line the right color? - Enter the trade. - Exit when the price hits the green dashed line (Quick Take Profit) **OR** when the price breaks the step line (Trailing Stop for longer trends). What aspect of this indicator should we analyze next—perhaps integrating it with real-time ETH data or testing it via code execution for backtesting?
Chỉ báo Pine Script®
của petronio666
XAUUSD ULTIMATE+BB 🥇 [GOLD OPTIMIZED]🥇 XAUUSD ULTIMATE 100% - Best Gold Indicator The most complete trading system for GOLD (XAUUSD) - 20+ indicators in ONE tool! 🔥 WHAT YOU GET: ✅ COMPLETE TRADING SYSTEM - Buy/Sell signals with 0-100% confidence score - Automatic SL/TP levels (optimized for gold) - Real-time profit tracking in $ and % - Clean visual interface with live dashboard ✅ POWERFUL FEATURES - 📊 Bollinger Bands - Full visualization - 📈 SuperTrend - Dynamic trend line - 🎯 Divergence Detection - Early reversals - 🕯️ Candlestick Patterns - Hammer, Engulfing, etc - 💎 Order Blocks - Smart Money levels - 🕐 Session Lines - London/NY high volatility periods ✅ SMART SIGNAL SYSTEM - Multi-indicator confirmation (EMAs, RSI, MACD, Stochastic, ADX) - Fast Entry Mode - Catches early moves - Aggressive Mode - More signals - Volume confirmation included - Psychological levels ($50 increments) ✅ EASY TO USE 1. Add to XAUUSD chart 2. Adjust sensitivity (1-10) 3. Wait for BUY/SELL arrows 4. Follow displayed SL/TP levels ✅ ALERTS INCLUDED - Buy/Sell signals - Divergence alerts - Profit targets (0.15%, 0.30%) - Bollinger Band extremes 🎯 BEST FOR: - Gold scalping (M5-M15) - Day trading (M15-H1) - All experience levels ⚙️ FULLY CUSTOMIZABLE - Adjustable sensitivity - Show/hide any feature - Custom SL/TP multipliers - Choose your trading style 💡 WHY IT'S THE BEST: - Gold-specific optimization - 20+ indicators working together - Professional-grade accuracy - Clean, easy-to-read interface - Works in all market conditions
Chỉ báo Pine Script®
của protradech79
1
Bank Zone by TheRealWealthVision V2The Bank Zone indicator is designed to help traders identify key price areas where institutions, banks, and large market participants are likely active. It highlights potential zones of accumulation, distribution, liquidity grabs, and high-value reaction levels. This tool automatically detects structural shifts, dynamic zones, and real-time market behavior to support more accurate decision-making. It is suitable for scalping, intraday trading, and swing trading across all markets including Forex, Indices, Crypto, Stocks, Commodities, and more. Main Features Automatic detection of potential institutional zones Real-time dynamic updates Clear visual highlights on the chart Designed to work on all timeframes Fully compatible with the latest TradingView Pine Script engine Best For Identifying high-probability reaction areas Understanding where big players may enter or exit Improving trade timing and precision Building a cleaner, more structured market view Important Notice This indicator does not repaint historical zones improperly, does not generate unrealistic signals, and follows all TradingView guidelines for script behavior.
Chỉ báo Pine Script®
của Imado_lartiista
BAY_PIVOT S/R(4 Full Lines + ALL Labels)//@version=5 indicator("BAY_PIVOT S/R(4 Full Lines + ALL Labels)", overlay=true, max_labels_count=500, max_lines_count=500) // ────────────────────── TOGGLES ────────────────────── showPivot = input.bool(true, "Show Pivot (Full Line + Label)") showTarget = input.bool(true, "Show Target (Full Line + Label)") showLast = input.bool(true, "Show Last Close (Full Line + Label)") showPrevClose = input.bool(true, "Show Previous Close (Full Line + Label)") useBarchartLast = input.bool(true, "Use Barchart 'Last' (Settlement Price)") showR1R2R3 = input.bool(true, "Show R1 • R2 • R3") showS1S2S3 = input.bool(true, "Show S1 • S2 • S3") showStdDev = input.bool(true, "Show ±1σ ±2σ ±3σ") showFib4W = input.bool(true, "Show 4-Week Fibs") showFib13W = input.bool(true, "Show 13-Week Fibs") showMonthHL = input.bool(true, "Show 1M High / Low") showEntry1 = input.bool(false, "Show Manual Entry 1") showEntry2 = input.bool(false, "Show Manual Entry 2") entry1 = input.float(0.0, "Manual Entry 1", step=0.25) entry2 = input.float(0.0, "Manual Entry 2", step=0.25) stdLen = input.int(20, "StdDev Length", minval=1) fib4wBars = input.int(20, "4W Fib Lookback") fib13wBars = input.int(65, "13W Fib Lookback") // ────────────────────── DAILY CALCULATIONS ────────────────────── high_y = request.security(syminfo.tickerid, "D", high , lookahead=barmerge.lookahead_on) low_y = request.security(syminfo.tickerid, "D", low , lookahead=barmerge.lookahead_on) close_y = request.security(syminfo.tickerid, "D", close , lookahead=barmerge.lookahead_on) pivot = (high_y + low_y + close_y) / 3 r1 = pivot + 0.382 * (high_y - low_y) r2 = pivot + 0.618 * (high_y - low_y) r3 = pivot + (high_y - low_y) s1 = pivot - 0.382 * (high_y - low_y) s2 = pivot - 0.618 * (high_y - low_y) s3 = pivot - (high_y - low_y) prevClose = close_y last = useBarchartLast ? request.security(syminfo.tickerid, "D", close , lookahead=barmerge.lookahead_off) : close target = pivot + (pivot - prevClose) // StdDev + Fibs + Monthly (unchanged) basis = ta.sma(close, stdLen) dev = ta.stdev(close, stdLen) stdRes1 = basis + dev stdRes2 = basis + dev*2 stdRes3 = basis + dev*3 stdSup1 = basis - dev stdSup2 = basis - dev*2 stdSup3 = basis - dev*3 high4w = ta.highest(high, fib4wBars) low4w = ta.lowest(low, fib4wBars) fib382_4w = high4w - (high4w - low4w) * 0.382 fib50_4w = high4w - (high4w - low4w) * 0.500 high13w = ta.highest(high, fib13wBars) low13w = ta.lowest(low, fib13wBars) fib382_13w_high = high13w - (high13w - low13w) * 0.382 fib50_13w = high13w - (high13w - low13w) * 0.500 fib382_13w_low = low13w + (high13w - low13w) * 0.382 monthHigh = ta.highest(high, 30) monthLow = ta.lowest(low, 30) // ────────────────────── COLORS ────────────────────── colRed = color.rgb(255,0,0) colLime = color.rgb(0,255,0) colYellow = color.rgb(255,255,0) colOrange = color.rgb(255,165,0) colWhite = color.rgb(255,255,255) colGray = color.rgb(128,128,128) colMagenta = color.rgb(255,0,255) colPink = color.rgb(233,30,99) colCyan = color.rgb(0,188,212) colBlue = color.rgb(0,122,255) colPurple = color.rgb(128,0,128) colRed50 = color.new(colRed,50) colGreen50 = color.new(colLime,50) // ────────────────────── 4 KEY FULL LINES ────────────────────── plot(showPivot ? pivot : na, title="PIVOT", color=colYellow, linewidth=3, style=plot.style_linebr) plot(showTarget ? target : na, title="TARGET", color=colOrange, linewidth=2, style=plot.style_linebr) plot(showLast ? last : na, title="LAST", color=colWhite, linewidth=2, style=plot.style_linebr) plot(showPrevClose ? prevClose : na, title="PREV CLOSE",color=colGray, linewidth=1, style=plot.style_linebr) // ────────────────────── LABELS FOR ALL 4 KEY LEVELS (SAME STYLE AS OTHERS) ────────────────────── f_label(price, txt, bgColor, txtColor) => if barstate.islast and not na(price) label.new(bar_index, price, txt, style=label.style_label_left, color=bgColor, textcolor=txtColor, size=size.small) if barstate.islast showPivot ? f_label(pivot, "PIVOT " + str.tostring(pivot, "#.##"), colYellow, color.black) : na showTarget ? f_label(target, "TARGET " + str.tostring(target, "#.##"), colOrange, color.white) : na showLast ? f_label(last, "LAST " + str.tostring(last, "#.##"), colWhite, color.black) : na showPrevClose ? f_label(prevClose, "PREV CLOSE "+ str.tostring(prevClose, "#.##"), colGray, color.white) : na // ────────────────────── OTHER LEVELS – line stops at label ────────────────────── f_level(p, txt, tc, lc, w=1) => if barstate.islast and not na(p) lbl = label.new(bar_index, p, txt, style=label.style_label_left, color=lc, textcolor=tc, size=size.small) line.new(bar_index-400, p, label.get_x(lbl), p, extend=extend.none, color=lc, width=w) if barstate.islast if showR1R2R3 f_level(r1, "R1 " + str.tostring(r1, "#.##"), color.white, colRed) f_level(r2, "R2 " + str.tostring(r2, "#.##"), color.white, colRed) f_level(r3, "R3 " + str.tostring(r3, "#.##"), color.white, colRed, 2) if showS1S2S3 f_level(s1, "S1 " + str.tostring(s1, "#.##"), color.black, colLime) f_level(s2, "S2 " + str.tostring(s2, "#.##"), color.black, colLime) f_level(s3, "S3 " + str.tostring(s3, "#.##"), color.black, colLime, 2) if showStdDev f_level(stdRes1, "+1σ " + str.tostring(stdRes1, "#.##"), color.white, colPink) f_level(stdRes2, "+2σ " + str.tostring(stdRes2, "#.##"), color.white, colPink) f_level(stdRes3, "+3σ " + str.tostring(stdRes3, "#.##"), color.white, colPink, 2) f_level(stdSup1, "-1σ " + str.tostring(stdSup1, "#.##"), color.white, colCyan) f_level(stdSup2, "-2σ " + str.tostring(stdSup2, "#.##"), color.white, colCyan) f_level(stdSup3, "-3σ " + str.tostring(stdSup3, "#.##"), color.white, colCyan, 2) if showFib4W f_level(fib382_4w, "38.2% 4W " + str.tostring(fib382_4w, "#.##"), color.white, colMagenta) f_level(fib50_4w, "50% 4W " + str.tostring(fib50_4w, "#.##"), color.white, colMagenta) if showFib13W f_level(fib382_13w_high, "38.2% 13W High " + str.tostring(fib382_13w_high, "#.##"), color.white, colMagenta) f_level(fib50_13w, "50% 13W " + str.tostring(fib50_13w, "#.##"), color.white, colMagenta) f_level(fib382_13w_low, "38.2% 13W Low " + str.tostring(fib382_13w_low, "#.##"), color.white, colMagenta) if showMonthHL f_level(monthHigh, "1M HIGH " + str.tostring(monthHigh, "#.##"), color.white, colRed50, 2) f_level(monthLow, "1M LOW " + str.tostring(monthLow, "#.##"), color.white, colGreen50, 2) // Manual entries plot(showEntry1 and entry1 > 0 ? entry1 : na, "Entry 1", color=colBlue, linewidth=2, style=plot.style_linebr) plot(showEntry2 and entry2 > 0 ? entry2 : na, "Entry 2", color=colPurple, linewidth=2, style=plot.style_linebr) // Background bgcolor(close > pivot ? color.new(color.blue, 95) : color.new(color.red, 95))
Chỉ báo Pine Script®
của baymont08980
MarketCap & SectorThis indicator shows a quick fundamental snapshot for the current stock directly on the chart. It displays: - Market Cap in ₹ crores (for example: 4,609.11 Cr) - Market‑cap category based on size (Large‑cap, Mid‑cap, Small‑cap, or Micro‑cap) - Sector and Industry of the company - 1‑month average daily volume in a compact format (for example: 10.5M) Use it to instantly see how big the company is, what segment of the market it belongs to, and how actively it trades, without opening any extra info panels or websites.
Chỉ báo Pine Script®
của CS_VCP
Elliott Wave Multi-Level (Micro/Main)**Title Suggestion:** Elliott Wave Multi-Level Strategy (Micro/Main) **Short Description (for TradingView):** This strategy detects Elliott Waves on two levels — **Micro** (short-term swings) and **Main** (higher-level structures) — and uses them for fully automated long and short trading. Main Impulse waves (1–5) and ABC corrections are identified using pivot logic, ATR-based movement filters, volume confirmation, and an optional EMA trend filter. Micro Impulse waves serve as confirmation for Main structures, creating a multi-level validation system that significantly reduces false signals. Entries are taken either: * **with the trend**, after confirmed Main Impulse waves, or * optionally as **reversal trades** at the completion of ABC corrections. Stop-loss and take-profit levels are dynamically calculated using ATR multipliers, allowing the strategy to adapt to different volatility environments. All parameters (pivots, filters, confirmations, risk settings) are fully customizable to fit various markets and timeframes (e.g., 1m–15m).
Chỉ báo Pine Script®
của KnuStrategicTrading
Easy Crypto Signal FREE🆓 FREE Bitcoin & Crypto Trading Indicator Easy Crypto Signal FREE helps you make better trading decisions with real-time BUY/SELL signals based on multiple technical indicators. ✅ What you get in FREE version: • Real-time BUY/SELL signals (green/red arrows) • Trading SCORE (0-100%) - market strength indicator • Works on BTC, ETH, and all major altcoins • Optimized for 4h timeframe (works on all timeframes) • Simple visual interface • Basic alert system 📊 How it works: The indicator combines RSI, MACD, EMA trends, and volume analysis to generate a composite SCORE (0-100%). • SCORE > 65% = BUY signal 🟢 • SCORE < 35% = SELL signal 🔴 • SCORE 35-65% = WAIT (neutral zone) 🟡 ⚠️ FREE Version Limitations: • No detailed RSI values • No MACD trend details • No trend strength indicators • Fixed sensitivity (65%) • Limited customization 💎 Want the FULL PRO version? 🚀 PRO includes: • Full RSI + MACD + Trend analysis displayed • Customizable sensitivity (40-80%) • Advanced alert customization • Professional clean interface • Volume strength indicator • NO watermarks • Premium support 📊 Proven Backtest Results: • 57.1% Win Rate • 3.36 Profit Factor (Excellent) • +9.55% return in 3 months • Only -2.69% Max Drawdown (Low Risk) 🔗 Get PRO version: 📈 Best practices: 1. Use on 4h timeframe for best results 2. Combine with your own analysis 3. Always set Stop Loss (5-10%) 4. Test on demo account first 5. Don't trade based on signals alone ⚠️ Risk Disclaimer: Cryptocurrency trading involves substantial risk. This indicator is for educational purposes only and does not guarantee profits. Past performance does not indicate future results. Always do your own research and never invest more than you can afford to lose. 📧 Questions or Feedback? Comment below or message me directly! 🌟 If you find this helpful, please give it a like and share! v1.0 - Initial FREE release • Basic BUY/SELL signal system • Score indicator 0-100% • Optimized for 4h timeframe • Works on all crypto pairs
Chỉ báo Pine Script®
của Golkar22
1