Bắt đầu

Multitimeframe

RSI MTF Table - 12 Pairs (1,5,15) The relative strength index measures the speed and magnitude of an asset's recent price changes. Therefore, it is considered a momentum indicator in technical analysis. Essentially, the RSI is the ratio of the days an asset's value increases to decreases over a given period. Generally speaking, if the RSI is around 50, we do not expect strong movements. RSI above 65 or below 35 are areas we expect. In this context, this chart and the general momentum in 1-5-15 minutes allow us to quickly determine the parity we will trade. It is useful for intraday trading and scalping.
Chỉ báo Pine Script®
của MICROTRADES
Adaptive ATR Guardian PRO+ (Locked Lines)🎯 核心交易功能 / Core Trading Features 1. 智能参数配置系统 / Intelligent Parameter Configuration 多风格选择：稳健/激进/保守三种交易风格 Multi-style Selection: Conservative/Aggressive/Moderate trading styles 多时间周期：M5/M15/H1三种时间框架 Multi-timeframe: M5/M15/H1 timeframes 自适应参数：根据风格自动调整所有技术参数 Adaptive Parameters: Automatically adjusts all technical parameters based on style 2. 高级信号生成系统 / Advanced Signal Generation 双均线策略：快慢EMA交叉信号 Dual MA Strategy: Fast/Slow EMA crossover signals 趋势过滤：100周期EMA作为趋势方向过滤 Trend Filter: 100-period EMA for trend direction filtering ADX强度确认：ADX > 最小值才确认趋势有效 ADX Strength Confirmation: ADX > minimum value for valid trend 交易时段控制：可设置交易开始和结束时间 Trading Session Control: Configurable start and end times 3. 智能风险管理 / Intelligent Risk Management 动态止损：基于ATR的智能止损计算 Dynamic Stop Loss: ATR-based intelligent stop loss calculation 分批止盈：TP1平仓50%，TP2平仓剩余50% Partial Take Profit: TP1 closes 50%, TP2 closes remaining 50% 追踪止损：TP2部分启用追踪止损功能 Trailing Stop: TP2 portion uses trailing stop functionality 品种自适应：BTC和黄金品种特殊参数调整 Symbol Adaptation: Special parameter adjustments for BTC and Gold 4. 专业订单管理 / Professional Order Management 自动平仓：新信号自动平掉反向仓位 Auto Close: New signals automatically close opposite positions 仓位管理：基于账户权益的百分比仓位 Position Management: Percentage-based position sizing 佣金计算：包含交易佣金成本 Commission Calculation: Includes trading commission costs 📊 高级可视化功能 / Advanced Visualization Features 1. 实时交易线系统 / Real-time Trading Lines System 入场线：蓝色虚线，显示入场价格 Entry Line: Blue dashed line showing entry price 止损线：红色实线，显示止损价格 Stop Loss Line: Red solid line showing stop loss price TP1线：青色实线，显示第一目标位 TP1 Line: Teal solid line showing first target TP2线：青色实线，显示第二目标位 TP2 Line: Teal solid line showing second target 2. 智能标签管理 / Intelligent Label Management 动态字号：根据时间周期自动调整标签大小 Dynamic Font Size: Auto-adjusts label size based on timeframe 位置优化：标签固定在入场K线右侧3根位置 Position Optimization: Labels fixed 3 bars right of entry candle 实时更新：线条和标签随图表滚动延伸 Real-time Updates: Lines and labels extend with chart scrolling 3. 专业信息面板 / Professional Information Panel 策略状态：交易风格、时间周期、持仓方向 Strategy Status: Trading style, timeframe, position direction 指标数据：ADX强度、ATR波动率数值 Indicator Data: ADX strength, ATR volatility values 交易信息：入场价格、止损价格、止盈价格 Trade Information: Entry price, stop loss, take profit prices 实时更新：每根K线更新最新数据 Real-time Updates: Updates data on every candle 4. 模式状态标签 / Mode Status Label 顶部状态栏：显示周期、风格、ADX、ATR、持仓状态 Top Status Bar: Shows timeframe, style, ADX, ATR, position status 颜色编码：蓝色主题，专业视觉效果 Color Coding: Blue theme, professional visual appearance ⚙️ 技术特色功能 / Technical Special Features 1. 自适应波动率调整 / Adaptive Volatility Adjustment ATR基准：基于14周期ATR计算 ATR Baseline: Based on 14-period ATR calculation 波动率调整：ATR相对于50周期均线的调整系数 Volatility Adjustment: ATR adjustment coefficient relative to 50-period MA 动态止盈：止盈距离根据波动率动态调整 Dynamic Take Profit: TP distances dynamically adjusted based on volatility 2. 多品种优化 / Multi-Symbol Optimization BTC特殊处理：更大的止损倍数和TP2倍数 BTC Special Handling: Larger stop loss and TP2 multipliers 黄金特殊处理：适中的参数调整 Gold Special Handling: Moderate parameter adjustments 通用品种：标准参数适用于其他品种 General Symbols: Standard parameters for other symbols 3. 时间智能控制 / Intelligent Time Control 交易时段：可配置的交易时间窗口 Trading Sessions: Configurable trading time windows 时段逻辑：支持跨午夜的时间段设置 Session Logic: Supports cross-midnight time periods 时间过滤：只在交易时段内产生信号 Time Filtering: Only generates signals during trading hours 4. 内存管理优化 / Memory Management Optimization 自动清理：平仓时自动删除所有线条和标签 Auto Cleanup: Automatically deletes all lines and labels on position close 资源回收：避免图表元素堆积 Resource Recycling: Prevents chart element accumulation 性能优化：高效的实时更新机制 Performance Optimization: Efficient real-time update mechanism 🛡️ 风险控制功能 / Risk Control Features 1. 多层过滤系统 / Multi-layer Filtering System 趋势方向过滤 / Trend direction filtering ADX强度过滤 / ADX strength filtering 交易时间过滤 / Trading time filtering 品种特性过滤 / Symbol characteristic filtering 2. 动态参数系统 / Dynamic Parameter System 快慢均线周期自适应 / Fast/slow MA period adaptation 止损倍数动态调整 / Stop loss multiplier dynamic adjustment 止盈倍数风格化配置 / Take profit multiplier style-based configuration 追踪止损灵敏度设置 / Trailing stop sensitivity settings 3. 资金管理 / Money Management 固定百分比仓位 / Fixed percentage position sizing 佣金成本计入 / Commission costs included 无金字塔加仓 / No pyramiding (no adding to positions) 自动反向平仓 / Automatic opposite position closing 📈 用户体验功能 / User Experience Features 1. 可视化定制 / Visualization Customization 交易线显示/隐藏开关 / Trading lines show/hide toggle 信息面板显示控制 / Information panel display control 线条延伸长度可调 / Line extension length adjustable 颜色方案统一管理 / Color scheme unified management 2. 实时监控 / Real-time Monitoring 持仓状态实时显示 / Real-time position status display 关键价格水平标记 / Key price level markings 指标数值动态更新 / Indicator values dynamic updates 交易统计信息 / Trading statistics information 3. 专业布局 / Professional Layout 右上角信息面板 / Top-right information panel 顶部状态标签 / Top status label 图表交易线条 / Chart trading lines 整洁的视觉层次 / Clean visual hierarchy
Chiến lược Pine Script®
của Jasperrrr23
ZOBAKAFXAI – Price Action Swing SetupThe ZOBAKAFXAI Price Action Swing Setup is a swing trading indicator that helps traders identify clear market structure, trend direction, and potential entry/exit zones using EMA and pivot-based price action. 🔹 Features: ✅ Automatically detects swing highs & swing lows (market structure) ✅ EMA-based trend direction filter (EMA50 / EMA200) ✅ Higher timeframe trend filter option (4H bias on lower TFs) ✅ ATR-based Stop Loss & TP calculation ✅ TP1 / TP2 / TP3 based on Risk-to-Reward ratio ✅ Works on all pairs – Forex, Gold, Crypto, Indices ✅ Clean design – ideal for 4H swing trading 🔹 How to Use: Trade in the direction of the EMA trend Buy when price forms a higher low above EMA & breaks previous swing high Sell when price forms a lower high below EMA & breaks previous swing low Stop Loss = ATR × selected multiplier TP levels are auto-calculated based on Risk/Reward (2R, 3R, etc.) ⚠ Disclaimer: This script is for educational and technical analysis purposes only. It is not financial advice. Always use risk management.
Chỉ báo Pine Script®
của zobakafxAi
ICMR — Chrono Maker Range (v12.7.1)✅ ICMR — Chrono Maker Range (v12.7) — Description (Balanced Technical + Friendly) ICMR — Chrono Maker Range is a hybrid market-structure tool designed to help traders clearly identify directional bias and high-quality breakouts using either Higher-Timeframe (HTF) ranges or Initial Balance (IB) ranges. The indicator automatically builds the range, colors candles by market state, and highlights breakout signals using smart filters to reduce noise. The concept is simple: Price is either above the range (Bullish), inside the range (Neutral), or below the range (Bearish)—and ICMR keeps this state stable and easy to follow. 🔷 How It Works ICMR constructs a tradable range using one of two modes: 1) HTF Range Mode Pulls the High / Low from a higher timeframe (e.g., Daily, 4H). You can choose: Previous HTF candle → stable, non-moving range Current HTF candle → dynamic, expands until HTF close Perfect for tracking market bias across smaller timeframes. 2) Initial Balance (IB) Mode Builds the range from the first N minutes of the session (e.g., first 60 minutes). After the IB period ends, the range locks and becomes the day’s framework. 🔷 Market State Logic The indicator evaluates where price is relative to the range and classifies the market into: ✅ Bullish → price breaks above the range ⚪ Neutral → price stays inside ❌ Bearish → price breaks below You can optionally enable an EMA Trend Filter (fast vs slow EMA) to ensure breakouts align with trend direction. 🔷 Smart Signal System ICMR includes compact signal shapes (triangles/circles), but only when conditions are strong: ✔️ Minimum breakout distance beyond the range ✔️ Candle body must exceed a % of ATR ✔️ Optional volume expansion filter ✔️ Cooldown between signals to avoid over-trading ✔️ Option to trigger signals only on state flips These filters help keep signals actionable and reduce noise. 🔷 Visual Tools HTF/IB Range High, Range Low, Midline Optional shaded box Segmented extend-right lines that reset when HTF/IB changes Bar coloring (Bull/Neutral/Bear) Soft background tint (optional) Built-in info panel with range & filter stats Alerts on state flips Everything is designed to keep the chart clean and readable. 🔷 Presets The indicator includes two ready-to-use profiles: Conservative Stable HTF ranges, confirmed breaks, trend-filtered signals, and fewer alerts. Aggressive Dynamic HTF ranges, more flexible break rules, and more frequent signals. Each preset can be fully customized. 🔷 How Traders Use It Intraday traders use HTF ranges (D, 4H) for bias on 1m–15m charts. Day traders use IB to track the opening range and breakout opportunities. Swing traders use conservative settings to filter false moves. Scalpers enable aggressive mode with ATR/volume filters.
Chỉ báo Pine Script®
của alamery020
Final Scalping Strategy - RELAXED ENTRY, jangan gopoh braderEMA Scalping System (MTF) Guide (1HR direction, 15 min entry) Objective To capture small, consistent profits by entering trades when 15-minute momentum aligns with the 1-hour trend. Trades are executed only during high-liquidity London and New York sessions to increase the probability of execution and success. Strategy Setup Chart Timeframe (Execution): 15-Minute (M15). Trend Filter (HTF): 1-Hour (H1) chart data is used for the long-term EMA. Long-Term Trend Filter: 50-Period EMA (based on H1 data). Short-Term Momentum Signal: 20-Period EMA (based on M15 data). Risk Metric: 14-period ATR for dynamic Stop Loss calculation. ✅ Trading Rules🟢 Long (Buy) Entry Conditions Session: Must be within the London (0800-1700 GMT) or New York (1300-2200 GMT) sessions. HTF Trend: Current price must be above the 1-Hour EMA 50. Momentum Signal: Price crosses above the 15-Minute EMA 20. Confirmation: The bar immediately following the crossover must close above the 15-Minute EMA 20. Ent ry: A market order is executed on the close of the confirmation candle. 🔴 Short (Sell) Entry Conditions Session: Must be within the London (0800-1700 GMT) or New York (1300-2200 GMT) sessions. HTF Trend: Current price must be below the 1-Hour EMA 50. Momentum Signal: Price crosses below the 15-Minute EMA 20. Confirmation: The bar immediately following the crossover must close below the 15-Minute EMA 20. Entry: A market order is executed on the close of the confirmation candle. 🛑 Trade Management & Exits Stop Loss (SL): Placed dynamically at 2.0 times the 14-period ATR distance from the entry candle's low (for Buys) or high (for Sells). Take Profit (TP): Placed dynamically to achieve a 1.5 Risk-Reward Ratio (RR) (TP distance = 1.5 x SL d istance). 📊 On-Chart Visuals Detailed Labels: A box appears on the entry bar showing the action, SL/TP prices, Risk/Reward in Pips, and the exact R:R ratio. Horizontal Lines: Dashed lines display the calculated SL (Red) and TP (Green) levels while the trade is active. Background: The chart background is shaded to highlight the active London and New York tradi ng sessions.
Chiến lược Pine Script®
của hushedDiamond97573
RSI + MACD Multi-Timeframe StrategyThis strategy combines the Relative Strength Index (RSI) from the daily timeframe with the Moving Average Convergence Divergence (MACD) from the 4-hour timeframe to generate precise long entry and exit signals. The system uses a multi-timeframe approach to align longer-term trend conditions with shorter-term momentum shifts — allowing traders to catch dips with confirmation and exit before reversals. 🧠 Strategy Logic ✅ Long Entry Condition: - RSI on the daily (1D) timeframe is oversold (below your defined threshold) - MACD on the 4H timeframe crosses above the signal line → A long trade is opened when these two align ✅ Long Exit Condition: - RSI on the daily timeframe is overbought - MACD on the 4H timeframe crosses below the signal line → The long trade is closed when these two conditions are met 💡 This strategy currently supports long entries only. Short logic can be added if needed. 📊 Indicator Components 🔹 RSI (Relative Strength Index): - A momentum oscillator that measures the speed and magnitude of price changes. - Helps identify overbought (potential sell) and oversold (potential buy) conditions. - Applied on the 1D timeframe (by default) to reflect broader market trend or exhaustion levels. 🔹 MACD (Moving Average Convergence Divergence): - A trend-following momentum indicator based on moving averages. - The MACD Line (fast EMA - slow EMA) crossing above the Signal Line indicates bullish momentum. - Used here on the 4-hour timeframe (by default) for shorter-term momentum confirmation. 🔹 Multi-Timeframe (MTF) Logic: - Uses request.security() to pull higher timeframe data (1D for RSI, 4H for MACD). - Ensures no repainting, as it only uses closed candles from the higher timeframe. - Aligns longer-term signals with shorter-term entries, reducing false signals. 📈 Plotting Options The script includes a plot selector input allowing you to toggle between: - RSI Plot (with overbought/oversold lines) - MACD Plot (MACD line and signal line) - This helps visualize signal conditions clearly on your chart. 🛠 Customization - RSI & MACD settings are fully configurable - RSI and MACD timeframes can be adjusted independently ⚠️ Disclaimer This strategy is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any asset. Past performance does not guarantee future results. Always test strategies in a simulated environment before live use, and consult with a licensed financial advisor for investment decisions.
Chiến lược Pine Script®
của RWCS_LTD
2
SR-ZnV2There are many support and resistance scripts out there. I was unable to find one that met all of my needs so I have expanded on the closest ones that I was able to discover. The ability to show persistent S/R levels by volume at various time frames automates much of the process for the user with unique and customizable features, the lastest dated of which are displayed by its time frame support/resistance strength and extend toward the right of the screen where they can be seen more clearly by price . // Original script is thanks to tommyf1001, synapticex and additional modifications is thanks to Lij_MC. Credit to both of them for most of the logic behind this script. Since then I have made many changes to this script as noted below. // Changed default S/R lines from plots to lines, and gave option to user to change between solid line, dashed line, or dotted line for both S/R lines. // Added additional time frame and gave more TF options for TF1 other than current TF. Now you will have 4 time frames to plot S/R zones from. // Gave user option to easily change line thickness for all S/R lines. // Made it easier to change colors of S/R lines and zones by consolidating the options under settings (rather than under style). // Added extensions to active SR Zones to extend all the way right. // Added option to extend or not extend the previous S/R zones up to next S/R zone. // Added optional time frame labels to active S/R zones, with left and right options as well as option to adjust how far to the right label is set. // Fixed issue where the higher time frame S/R zone was not properly starting from the high/low of fractal. Now any higher time frame S/R will begin exactly at the High/Low points. // Added to script a function that will prevent S/R zones from lower time frames displaying while on a higher time frame. This helps clean up the chart quite a bit. // Created arrays for each time frame's lines and labels so that the number of S/R zones can be controlled for each time frame and limit memory consumption. // New alert options added and customized alert messages.
Chỉ báo Pine Script®
của cjohnsonfl5
Session SFPThis script is a powerful, multi-timeframe tool designed to identify high-probability Swing Failure Patterns (SFPs) at key historical levels. Instead of looking for traditional "pivots" (like a 3-bar swing), this indicator finds the actual high and low of a previous higher-timeframe (HTF) bar (e.g., the previous weekly high/low) and waits for a lower-timeframe (LTF) candle to sweep that level and fail. This allows you to spot liquidity sweeps and potential reversals at significant, structural price points. How It Works The indicator's logic is based on a simple, two-timeframe process: Level Detection: First, it finds the high and low of the previous bar on your chosen "Level Timeframe" (e.g., W for Weekly, D for Daily). It plots these as small 'x' markers on your chart. SFP Identification: Second, it watches price action on a lower "SFP Timeframe" (e.g., 240 for 4H). A potential SFP is identified when a candle's wick sweeps above a key high or below a key low. Confirmation: The SFP is only confirmed after the SFP candle closes back below the high (for a bearish SFP) or above the low (for a bullish SFP). It then waits for a set number of "Confirmation Bars" to pass. If price does not close back over the level during this window, the signal is locked in, and a label is printed. How to Use (Key Settings) Level Timeframe (Most Important): This is the timeframe for the levels you want to trade. Set this to W to find SFPs of the previous weekly high/low. Set it to D to find SFPs of the previous daily high/low. SFP Timeframe: This is the timeframe you want to use to find the SFP candle itself. This should be lower than your Level Timeframe (e.g., 240 or 60). Level Lookback: This controls how many old levels the script will track. A value of 10 on a W Level Timeframe will track the highs and lows of the last 10 weeks. Confirmation Bars: This is your "patience" filter. It's the number of SFP Timeframe bars that must close without reclaiming the level after the SFP. A value of 0 will confirm the SFP immediately on the candle's close. Enable Wick % Filter: A quality filter. If checked, this ensures the SFP candle's rejection wick is a significant percentage of the candle's total range. Chart Visuals 'x' Markers: These are the historical highs and lows from your "Level Timeframe". You can turn these on or off in the settings. SFP Label: When an SFP is fully confirmed, a label (Bearish SFP or Bullish SFP) will appear, detailing the level that was swept and the timeframes used. SFP Line: A solid horizontal line is drawn from the 'x' marker to the SFP candle to highlight the sweep. Colored Boxes (Optional): If you are viewing a chart timeframe lower than your "SFP Timeframe", you can enable background boxes to highlight the exact SFP candle and its confirmation bars.
Chỉ báo Pine Script®
của nickbonenkamp
True Opens & Key Levels# True Opens & Key Levels - Standalone Indicator Guide ## Overview This is a clean, focused indicator that displays only key level rays and true open levels. All impulsive series detection, FVG detection, and Fibonacci projections have been removed for a minimal, uncluttered chart experience. --- ## Features Included ### 📊 Previous Period Levels - **Previous Day High/Low** - Daily reference points - **Previous Week High/Low** - Weekly reference points - **Previous Month High/Low** - Monthly reference points ### 🕐 Session High/Low Levels - **NY AM Session** (9:30-12:00 ET) - Morning session range - **NY Lunch Session** (12:00-13:30 ET) - Lunch hour range - **NY PM Session** (13:30-16:00 ET) - Afternoon session range - **London Session** (2:00-5:00 ET) - London trading hours - **Asia Session** (20:00-00:00 ET) - Asian market hours ### 🎯 True Open Levels (NEW) - **True Day Open** - Updates daily at 00:00 ET - **True Session Open** - Updates every 6 hours (1:30, 7:30, 13:30, 19:30 ET) - **True Week Open** - Updates every Monday at 18:00 ET --- ## Settings ### Key Level Rays Group **Master Toggle:** - Enable Key Level Rays (master on/off switch) **Previous Period Levels:** - Show Previous Day H/L - Show Previous Week H/L - Show Previous Month H/L **Session Levels:** - Show NY AM H/L (9:30-12:00 ET) - Show NY Lunch H/L (12:00-13:30 ET) - Show NY PM H/L (13:30-16:00 ET) - Show London H/L (2:00-5:00 ET) - Show Asia H/L (20:00-00:00 ET) **True Open Levels:** - Show True Day Open (00:00) - Show True Session Open (6h intervals) - Show True Week Open (Mon 18:00) **Visual Settings:** - High Level Color (default: red with 50% transparency) - Low Level Color (default: green with 50% transparency) - Open Level Color (default: blue with 50% transparency) - Ray Line Width (1-5 pixels) - Ray Label Size (tiny/small/normal/large) --- ## How It Works ### Level Behavior **Session High/Low Levels:** 1. During session: Tracks the highest high and lowest low 2. After session ends: Draws horizontal rays extending right 3. When price hits level: Ray stops extending (hit marker) 4. Label updates position to stay at chart's right edge **Previous Period Levels:** 1. At period change: Draws rays from previous period's H/L 2. Extends right until price hits the level 3. When hit: Ray stops extending 4. Label positions at midpoint of ray **True Open Levels:** 1. At trigger time: Draws ray from opening price 2. Extends right until next trigger 3. Previous level is deleted when new one appears 4. Label stays at right edge of chart --- ## Color Scheme ### Three Color Categories: 1. **Red** - All HIGH levels (session highs, previous highs) 2. **Green** - All LOW levels (session lows, previous lows) 3. **Blue** - All OPEN levels (True Day/Session/Week Opens) This makes it instantly clear what type of level you're looking at. --- ## Best Practices ### For Intraday Trading (1m-1H): ``` Enable: ✓ True Day Open ✓ True Session Open ✓ NY AM/PM H/L ✓ Previous Day H/L Disable: ✗ Previous Week/Month H/L ✗ London/Asia sessions (unless trading them) ✗ True Week Open ``` ### For Swing Trading (1H-4H): ``` Enable: ✓ True Week Open ✓ True Day Open ✓ Previous Week H/L ✓ Previous Day H/L Disable: ✗ All session H/L ✗ True Session Open ✗ Previous Month H/L ``` ### For Clean Charts: ``` Enable: ✓ True Day Open ✓ True Week Open ✓ Previous Day H/L only Disable: ✗ Everything else Result: Just 4 levels on chart - super clean! ``` --- ## Level Update Schedule | Level | Update Frequency | Time(s) | |---------------------|------------------|-----------------------------| | True Day Open | Daily | 00:00 ET | | True Session Open | Every 6 hours | 1:30, 7:30, 13:30, 19:30 ET | | True Week Open | Weekly | Monday 18:00 ET | | Previous Day H/L | Daily | At day change | | Previous Week H/L | Weekly | At week change | | Previous Month H/L | Monthly | At month change | | NY AM H/L | Daily | After 12:00 ET | | NY Lunch H/L | Daily | After 13:30 ET | | NY PM H/L | Daily | After 16:00 ET | | London H/L | Daily | After 5:00 ET | | Asia H/L | Daily | After 00:00 ET | --- ## File Size & Performance - **File Size:** ~22 KB (less than half the size of full indicator) - **Total Lines:** ~700 lines - **Max Lines/Labels:** 500 (configurable in declaration) - **Performance:** Lightweight, minimal CPU usage - **Memory:** Efficient variable management --- ## Installation 1. Open TradingView 2. Open Pine Editor (Alt+E or bottom toolbar) 3. Click "Create new indicator" 4. Delete default code 5. Copy and paste contents of `TRUE_OPENS_KEY_LEVELS.pine` 6. Click "Save" and name it "True Opens & Key Levels" 7. Click "Add to Chart" --- ## Usage Tips ### 1. Start Minimal Begin with just 2-3 levels enabled: - True Day Open - Previous Day High - Previous Day Low Add more as needed. ### 2. Color Customization Adjust transparency for cleaner look: - High Level: Red 60-70% transparency - Low Level: Green 60-70% transparency - Open Level: Blue 60-70% transparency ### 3. Multi-Timeframe Approach Lower timeframes (1m-15m): Use True Session Open + NY session H/L Mid timeframes (15m-1H): Use True Day Open + Previous Day H/L Higher timeframes (1H-4H): Use True Week Open + Previous Week H/L ### 4. Line Width For cleaner charts, use Line Width = 1 For emphasis, use Line Width = 2-3 ### 5. Label Size Smaller screens: Use "small" or "tiny" Larger screens: Use "normal" Presentations: Use "large" --- ## Advantages of Standalone Version ✅ **Cleaner Charts** - No detection lines or arrows ✅ **Faster Loading** - Less code to process ✅ **Easier Setup** - Fewer settings to configure ✅ **Pure Levels** - Focus only on key price levels ✅ **Less Distraction** - No moving parts during trading ✅ **Perfect for Combining** - Use with other indicators without clutter --- ## Combining with Other Indicators This lightweight indicator works great alongside: - RSI / Stochastic (oscillators) - Moving Averages (trend) - Volume Profile (structure) - VWAP (intraday reference) - Your own custom indicators The minimal chart footprint leaves room for additional tools. --- ## Time Zones All times are in **Eastern Time (ET)**. TradingView automatically converts to your local timezone, so you don't need to manually adjust anything. **Example Conversions:** - 00:00 ET = 05:00 UTC - 18:00 ET = 23:00 UTC - 13:30 ET = 18:30 UTC --- ## Support & Updates This is a standalone version of the True Opens & Key Levels from the full GOTE Indicator. It contains only the level detection code with all series detection removed. **Version:** 1.0 **Pine Script Version:** 6 **Last Updated:** November 8, 2025 --- ## Quick Reference Card ``` ╔══════════════════════════════════════════════════════════╗ ║ TRUE OPENS & KEY LEVELS - QUICK REFERENCE ║ ╠══════════════════════════════════════════════════════════╣ ║ ║ ║ 📊 PREVIOUS PERIODS ║ ║ • Previous Day/Week/Month High/Low ║ ║ • Updates at period change ║ ║ ║ ║ 🕐 SESSION LEVELS ║ ║ • NY AM/Lunch/PM, London, Asia H/L ║ ║ • Updates after each session ║ ║ ║ ║ 🎯 TRUE OPENS ║ ║ • True Day: Daily 00:00 ET ║ ║ • True Session: 1:30/7:30/13:30/19:30 ET ║ ║ • True Week: Monday 18:00 ET ║ ║ ║ ║ 🎨 COLORS ║ ║ • Red = Highs • Green = Lows • Blue = Opens ║ ║ ║ ╚══════════════════════════════════════════════════════════╝ ``` --- **Ready to trade with clean, focused key levels!** 🎯
Chỉ báo Pine Script®
của grayp352
ORB Breakout Strategy w/ Filters - Dynamic Sizing - MTFHere is a comprehensive description of the strategy, written in a clear and structured format. You can use this for your script's "how-to-use" guide or documentation. --- ## 📈 Opening Range Breakout (ORB) Strategy This is a comprehensive, multi-timeframe strategy built for trading opening range breakouts. It is designed with a "filters-first" approach, allowing you to validate a breakout with trend, volume, and volatility. The strategy's core power comes from its flexibility. You can trade on a low timeframe (like a 1-minute chart) while basing your breakout levels on a higher timeframe's opening bar (e.g., the first 15-minute bar). It includes dynamic position sizing based on risk and a wide array of advanced exit management options. ### Key Features * **Multi-Timeframe Opening Range:** The core of the strategy. You can define the "Opening Range" timeframe (5, 10, 15, 30, or 60 min) *independently* of your chart timeframe. * **Custom Trading Session:** Define the exact session (e.g., "0930-1600" in "America/New_York") you want to trade. * **One Trade Per Session:** The strategy will only take the *first valid breakout* signal per day to avoid over-trading. --- ### 🚦 Entry Signals & Filters A trade is only initiated when the price closes above the Session High or below the Session Low **AND** all active filters are passed. * **Trend Filter:** (Optional) Requires price to be above a long-term MA (e.g., 100 EMA) for long trades and below it for short trades. * **Volume Filter:** (Optional) Requires the breakout bar's volume to be a specified multiplier (e.g., 1.5x) of the recent average volume. * **Volatility Filter:** (Optional) Requires the current ATR to be higher than its long-term average, ensuring you only trade during periods of expanding volatility. * **Direction Filter:** Allows you to isolate the strategy to **Long Only**, **Short Only**, or **Both**. --- ### 💰 Dynamic Position Sizing The strategy includes a robust "Risk %" sizing model. * **Risk-Based Sizing:** Instead of fixed contracts, it calculates the position size based on your **Account Size**, **Risk % per Trade**, and the **Stop Loss distance**. * **Auto-Detect Point Value:** It automatically detects the correct point value for popular futures contracts (ES, NQ, MES, MNQ) and provides a manual override for other assets. --- ### 📤 Exit & Risk Management This strategy features a multi-layered exit system, giving you complete control over how trades are managed. #### 1. Stop Loss (SL) Your initial stop loss can be calculated using a fixed **Tick** offset or an **ATR** multiplier. It can be anchored from two different points: * **Breakout Level:** The stop is placed relative to the `sessionHigh` or `sessionLow` level. * **Entry Bar:** The stop is placed relative to the high/low of the bar that *triggered* the entry. #### 2. Take Profit (TP) A standard Take Profit can be set using a fixed **Tick** offset or an **ATR** multiplier. #### 3. Advanced Exit Logic These options override the standard Take Profit to allow for more dynamic trade management: * **Trailing Take Profit (TTP):** * **Fixed/ATR Trail:** A standard trailing stop that activates after price moves a certain amount in your favor. * **MA Price Cross:** Exits the trade as soon as the price closes across a fast-moving average (e.g., 9-EMA). * **MA Crossover:** Exits the trade as soon as a fast MA crosses below a slow MA (for longs) or above (for shorts). * **Close on Reversal:** (Optional) Exits immediately if the **very next bar** after entry closes back *inside* the opening range (a "failed breakout" signal). * **Close on Opposite Range Cross:** (Optional) Exits a long trade if the price ever closes below the `sessionLow` (and vice-versa for shorts). * **End of Session Exit:** All open positions are automatically closed at the end of the defined trading session.
Chiến lược Pine Script®
của BruceAaLee
3
ROC & Momentum FusionROC & Momentum Fusion (by HabibiTrades ©) Purpose: “ROC & Momentum Fusion” combines the Rate of Change (ROC) with a MACD-style signal engine to identify early momentum reversals, confirmed trend shifts, and low-volatility choppy zones. It’s built for traders who want early momentum detection with the clarity of trend persistence — adaptable to any instrument and timeframe. ⚙️ How It Works Rate of Change (ROC): Measures the percentage speed of price change over time, showing the raw momentum strength. Signal Line (EMA): A short EMA of the ROC — responds faster to new directional shifts, similar to a MACD signal line. Histogram: Displays acceleration and deceleration between the ROC and its signal line. Persistent Trend States: When the ROC crosses the signal line or zero, the indicator enters a new momentum regime (bullish or bearish) and stays in that color until another flip occurs. Dynamic Choppy Zone: When ROC momentum fades within the zero buffer zone, the indicator turns orange, signaling a sideways or indecisive market. 🟢 Visual Regimes Regime Description Color Bullish Momentum ROC above zero or signal line 🟢 Neon Green Bearish Momentum ROC below zero or signal line 🔴 Neon Red Choppy / Neutral ROC hovering within ±threshold range 🟠 Neon Orange This color system makes it visually effortless to see whether the market is trending, reversing, or consolidating. 🧭 Adaptive Intelligence The script automatically adjusts to market type and session for consistent accuracy: Session Adaptive: Adjusts smoothing based on global sessions (Asian, London, New York, Sydney). Instrument Adaptive: Fine-tunes sensitivity automatically for major assets — NASDAQ (NQ), S&P 500 (ES), Gold (GC), Oil (CL), Bitcoin (BTC). Volatility Normalization: Optionally divides ROC by its own standard deviation to stabilize noisy assets and maintain consistent scaling. 🔔 Signals & Alerts Bullish Reversal: ROC crosses above its signal or zero line — early momentum flip. Bearish Reversal: ROC crosses below its signal or zero line — downward momentum flip. Alerts: Both reversal conditions include built-in alert triggers for automation and notifications. 🎨 Visual Features Main ROC Line: Adaptive EMA of ROC, color-coded by trend regime. Signal Line: Optional white EMA overlay for MACD-style crossovers. Histogram: Visual burst display of acceleration (green/red). Reversal Markers: Optional triangles marking exact crossover points. Threshold Lines: Highlight the zero and buffer zones for visual clarity. 🧩 Best Use Cases Identify early momentum shifts before price confirms them. Confirm trend continuation or exhaustion with color persistence. Detect choppy / low-volatility periods instantly. Works across all timeframes — from 1-minute scalping to weekly swings. Combine with structure, EMAs, or volume for confirmation. ⚙️ Recommended Settings Setting Default Description ROC Period 6 Core momentum length (lower = faster response). Signal EMA Length 3 MACD-style responsiveness (lower = more reactive). Zero Buffer Threshold 0.15 Defines the width of the neutral zone around zero. Choppy Zone Multiplier 1.0 Expands or tightens the orange zone sensitivity. These defaults have been optimized through real-market testing to balance responsiveness and smoothness across different asset classes. ⚠️ Notes The color regime is persistent, meaning once the line turns bullish or bearish, it remains in that state until momentum structurally flips. The orange zone represents momentum uncertainty and helps avoid false entries in range-bound markets. Works seamlessly on any timeframe and with any asset.
Chỉ báo Pine Script®
của Habibitrades_
Atif's Liquidity Toolkit💎 GENERAL OVERVIEW: Atif’s Liquidity Toolkit is a price-action-based indicator used to identify Buyside & Sellside Liquidity Levels, Liquidity Sweeps, FVG Sweeps, and Buy/Sell signals, following specific rules from Atif Hussain. This indicator was developed by Flux Charts in collaboration with Atif Hussain. 🔹Purpose of this indicator: The purpose of Atif’s Liquidity Toolkit is to help traders understand where liquidity is forming, when it’s being taken, and how momentum shifts immediately afterward. It automates the entire process of identifying buyside & sellside liquidity, detecting liquidity sweeps, and confirming whether displacement followed through a Fair Value Gap. The goal is to give traders a consistent, rule-based framework to interpret market structure. 🎯ATIF’S LIQUIDITY TOOLKIT FEATURES: Atif’s Liquidity Toolkit indicator includes 6 main features: Fair Value Gaps Multi-Timeframe Liquidity Levels Liquidity Sweeps Fair Value Gap Sweeps Buy & Sell Signals with Take-Profit & Stop-Loss Levels Alerts 1️⃣Fair Value Gaps 🔹What is a Fair Value Gap?: A Fair Value Gap (FVG) is an area where the market’s perception of fair value suddenly changes. On your chart, it appears as a three-candle pattern: a large candle in the middle, with smaller candles on each side that don’t fully overlap it. A bullish FVG forms when a bullish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. A bearish FVG forms when a bearish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. Bullish & Bearish FVGs: In the settings, you can toggle on/off FVGs, choose the invalidation method, adjust the sensitivity, and toggle on FVG Midline & Labels. 🔹Invalidation Method: The Invalidation Method setting allows traders to choose how an FVG is invalidated. You can choose between Close and Wick. Close: A candle must close below a bullish FVG or above a bearish FVG to invalidate it. Wick: A candle’s wick must go below a bullish FVG or above a bearish FVG to invalidate it. 🔹Sensitivity: The sensitivity setting determines the minimum gap size required for an FVG detection. A higher sensitivity will filter out smaller gaps, while a lower sensitivity will detect more frequent, smaller gaps. Setting the sensitivity to 0 will display all gaps, regardless of their size. On the left, the sensitivity is 5. On the right, the sensitivity is 0. 🔹Midline: When enabled, a dashed line is drawn at the center of the FVG. 🔹Labels: When enabled, a text label will be plotted with the gap, clearly identifying the zone as a FVG. 2️⃣ Multi-Timeframe Liquidity Levels The indicator automatically detects and plots Buyside Liquidity (BSL) & Sellside Liquidity (SSL) Levels across up to three timeframes simultaneously. 🔹What is Buyside Liquidity? Buyside Liquidity (BSL) represents price levels where many buy stop orders are sitting, usually from traders holding short positions. When price moves into these areas, those stop-loss orders get triggered and short sellers are forced to buy back their positions. These zones often form above key highs such as the previous day, week, or month. Understanding BSL is important because when price reaches these levels, the sudden wave of buy orders can create sharp reactions or reversals as liquidity is taken from the market. 🔹What is Sellside Liquidity? Sellside Liquidity (SSL) represents price levels where many sell stop orders are waiting, usually from traders holding long positions. When price drops into these areas, those stop-loss orders are triggered and long traders are forced to sell their positions. These zones often form below key lows such as the previous day, week, or month. Understanding SSL is important because when price reaches these levels, the surge of sell orders can cause sharp reactions or reversals as liquidity is taken from the market. Atif’s Liquidity Toolkit indicator automatically plots Buyside & Sellside Liquidity levels using the following levels: Previous Day High (PDH) & Previous Day Low (PDL) Previous Week High (PWH) & Previous Week Low (PWL) Previous Month High (PMH) & Previous Month Low (PML) Asia Session Highs/Lows London Session Highs/Lows New York Session Highs/Lows The session start and end times are not customizable. The following times in EST are used for each session: Asia Session: 20:00-00:00 London Session: 02:00-05:00 New York Sessions: NY AM: 09:30-11:00 NY Lunch: 12:00-13:00 NY PM: 14:00-16:00 Users can also plot swing highs/lows using a lookback period and choosing the higher timeframe. Users can choose two custom higher timeframes and also enable swing highs/lows from the current chart’s timeframe. There are three settings to customize for the current chart’s timeframe and higher timeframes: Current TF - when toggled on, swing highs/lows will be plotted from the chart’s timeframe using the pivot length input HTF 1 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input HTF 2 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input The Pivot Length controls how far back the indicator checks to confirm whether a candle’s high or low is a true swing point (also called a “pivot”). When detecting a swing high, the indicator checks if that candle’s high is higher than the highs of the previous X candles and the next X candles. For a swing low, it checks if the candle’s low is lower than the lows of the previous X candles and the next X candles. The number X comes from your Pivot Length setting. A lower Pivot Length input (for example, 3 or 4) means the indicator only looks at a few candles on each side, so it will detect more swing points, including smaller, less significant ones. A higher Pivot Length input (for example, 20 or 25) makes the indicator look at more candles on each side, so it only marks major turning points that stand out clearly on the chart. In short: Low Pivot Length = more frequent, smaller levels (short-term focus) High Pivot Length = fewer, stronger levels (major swing focus) The Pivot Length input for each setting (Current TF, HTF 1, and HTF 2) are displayed below in the red boxes: Each liquidity level is plotted with a text label, making it easy to identify where a level came from. You can turn off the ‘Show Levels’ setting if you don’t want to see the levels on your chart. Please note: Liquidity Levels play a key role in finding liquidity sweeps, FVG Sweeps, and Buy/Sell signals. Keeping the levels turned off will not stop the indicator from using the levels that are enabled from being used for the other features mentioned. 3️⃣Liquidity Sweeps: The indicator automatically detects bullish and bearish liquidity sweeps using the liquidity levels you have enabled. 🔹What is a Liquidity Sweep? A liquidity sweep is a market phenomenon where significant players, such as institutional traders, deliberately drive prices through key levels to trigger clusters of pending buy or sell orders. It’s how the market gathers the liquidity needed for larger participants to enter positions. Traders often place stop-loss orders around obvious highs and lows, such as the previous day’s, week’s, or month’s levels. When price pushes through one of these areas, it triggers the stops placed there and generates a burst of volume. This often creates a short-term fake-out before the market reverses in the opposite direction. By detecting these sweeps in real time, traders can identify potential reversal areas or “trap” areas where liquidity has been taken. 🔹Bullish Liquidity Sweep These occur when price dips below a Sellside Liquidity (SSL) level, taking out the stop-loss orders placed by long traders below that low. The indicator marks a zone around the candle that swept the SSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out sell-side liquidity, meaning traders who were long had their stops hit. This is often followed by a reversal or strong reaction upward, because the market no longer has pending liquidity to fill below that level. 🔹Bearish Liquidity Sweep These occur when price dips above a Buyside Liquidity (BSL) level, taking out the stop-loss orders placed by short seller traders above that high. The indicator marks a zone around the candle that swept the BSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out buyside liquidity, meaning short traders had their stops hit. This is often followed by a reversal or strong reaction downward, because the market no longer has pending liquidity to fill above that level. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off Bullish Regular Sweeps and Bearish Regular Sweeps. You can also customize the line style and color of liquidity levels that have been swept. 🔹How to Use Liquidity Sweeps Liquidity sweeps are not direct trade signals. They are best used as context when forming a directional bias. A sweep shows that the market has removed liquidity from one side, which can hint at where the next move may develop. For example: When Buyside Liquidity (BSL) is swept, it often signals that buy stops have been triggered and the market may be preparing to move lower. Traders may then begin looking for short opportunities. When Sellside Liquidity (SSL) is swept, it often signals that sell stops have been triggered and the market may be preparing to move higher. Traders may then begin looking for long opportunities. It’s common practice to use liquidity sweeps as the first step in building a trade idea. Many traders will wait for additional confirmation, such as a fair value gap forming after the sweep, before opening a position. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish Regular Sweeps - when disabled, Bullish Regular Sweeps won’t appear on your chart. Bearish Regular Sweeps - when disabled, Bearish Regular Sweeps won’t appear on your chart. 4️⃣Fair Value Gap Sweeps: The indicator automatically detects bullish and bearish Fair Value Gap sweeps (FVG Sweep) using the liquidity levels you have enabled. 🔹What is a FVG Sweep? A FVG Sweep is a specific type of liquidity sweep that not only clears liquidity above or below a key level, but also forms a Fair Value Gap (FVG) immediately afterward. The liquidity sweep shows where stop orders were triggered, areas where the market aggressively took out one side’s liquidity. The formation of a Fair Value Gap right after the sweep confirms that displacement followed. This means that the sweep was not just a stop hunt, but a deliberate move backed by momentum. In simple terms, a regular liquidity sweep only tells you that liquidity was taken. A FVG Sweep tells you that liquidity was taken and a strong directional move started immediately after, leaving an imbalance in price. That imbalance represents where aggressive buyers or sellers entered the market without enough opposite-side orders to keep price balanced. This combination adds a confirmation and intent behind regular liquidity sweeps. 🔹Bullish FVG Sweep The indicator automatically detects bullish FVG Sweeps when price takes out a Sellside Liquidity (SSL) level and then forms a bullish FVG within the next few candles. This sequence shows that sellers were stopped out and buyers immediately entered the market with momentum. 🔹Bearish FVG Sweep The indicator automatically detects bearish FVG Sweeps when price takes out a Buyside Liquidity (BSL) level and then forms a bearish FVG shortly after. This shows that short sellers’ stops were triggered, and new selling pressure entered the market right away. 🔹How to Use FVG Sweeps Unlike regular liquidity sweeps, FVG Sweeps can be used as trade entries because they confirm both liquidity being cleared and immediate momentum. A regular sweep only shows that stop-losses were triggered, but an FVG Sweep proves that price not only cleared liquidity but also moved away with momentum, leaving behind an imbalance (Fair Value Gap). This shift often marks the start of a new short-term trend. We’ll cover this in more detail in the Buy and Sell Signal section below, but in short, a bullish FVG Sweep can act as confirmation for a potential long entry after price takes out a low, while a bearish FVG Sweep can confirm a short entry after price takes out a high. The strongest FVG Sweeps come from extremely sharp reversals. On the chart, they look like a “V” shape for bullish setups or an inverted “V” shape for bearish setups. This shape shows how quickly momentum shifted after liquidity was cleared. When price instantly reverses and leaves a Fair Value Gap behind, it’s a clear sign that buyers or sellers stepped in aggressively and absorbed all available liquidity on the opposite side. In practice, traders often use FVG Sweeps as a trigger to align their bias. For example, after a bullish FVG Sweep, the focus shifts toward looking for long setups within the new imbalance or during a small retracement into the Fair Value Gap. After a bearish FVG Sweep, traders focus on short setups as price retraces back into the gap before continuing lower. The key takeaway is that FVG Sweeps show conviction. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish FVG Sweeps - when disabled, Bullish FVG Sweeps won’t appear on your chart. Bearish FVG Sweeps - when disabled, Bearish FVG Sweeps won’t appear on your chart. Please Note: the settings you choose to use for Fair Value Gaps, under the ‘Fair Value Gaps’ section, will be used for FVG Sweeps. This is important because if you increase the sensitivity value for FVGs, not all FVG Sweeps will appear if the FVG’s size doesn’t meet the sensitivity threshold. 5️⃣Buy & Sell Signals: This indicator also plots Buy & Sell signals. These signals follow logic based on Atif Hussain’s FVG trading model. The entry requirements for a Long & Short signal are outlined below. 🔹Buy Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bullish FVG Sweep Price Retraces to the Bullish FVG 🔹Sell Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bearish FVG Sweep Price Retraces to the FVG 🔹Require Retracement: Under the ‘Signals’ section in the settings, you can toggle on/off the ‘Require Retracement’ setting. When disabled, a long/short signal will appear immediately after a Bullish or Bearish FVG Sweep, instead of waiting for price to retrace back to the gap. Please Note: the liquidity levels you enable under the ‘Liquidity Levels’ section will be the levels used for signals. Thus, if you only have the Previous Day Highs/Lows enabled, then only those levels will be used to generate buy/sell signals. Also, long Signals will only appear if Bullish FVG Sweeps are enabled, and Short Signals will only appear if Bearish FVG Sweeps are enabled. When a Buy Signal or Sell Signal is plotted, three suggested take-profit levels and one suggested stop-loss level are plotted. There are two different Take-Profit methods you can choose from within the indicator settings: Manual or Auto. 🔹Manual Take-Profit: If you’re using manual take-profit levels, you can customize the Risk-to-Reward (RR) for Take-Profit 1, 2, and 3 by adjusting the “RR 1”, “RR 2”, and “RR 3” settings. Setting RR 1 to 1 means take-profit 1 is a 1:1 risk-to-reward ratio. The stop-loss will always be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. 🔹Auto Take-Profit: If you select to use Auto Take-Profit instead of Manual, then Take-Profit 1, 2, and 3 will be automatically determined based on nearby liquidity levels. The stop-loss will be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. Take-Profit Levels 1, 2, and 3 will be placed at the three closest opposite liquidity levels. If the take-profit 2 and take-profit 3 levels are too far away, only one take-profit level will be displayed. 🔹Signal Settings: Long Signals: When enabled, long signals are shown. When disabled, long signals will not appear. Short Signals: When enabled, short signals are shown. When disabled, short signals will not appear. Require Retracement: When enabled, price must retrace to a FVG after a FVG Sweep in order for a signal to be generated. Take-Profit Levels: When enabled, take-profit levels (TP 1, TP 2, and TP 3) are shown with long/short signals. When disabled, take-profit levels and their price labels are not displayed. Take-Profit Labels: When enabled, take-profit labels are displayed when price reaches one of the three take-profit levels. When disabled, labels won’t appear when price reaches take-profit levels. Stop-Loss Levels: When enabled, stop-loss levels are shown for long/short signals. When disabled, the stop-loss level and its price label are not displayed. Stop-Loss Labels: When enabled, stop-loss levels are shown for long/short signals. When disabled, a label won’t appear when price reaches the stop-loss level. 6️⃣Alerts: The indicator supports alerts, so you never miss a key market move. You can choose to receive alerts for each of the following conditions: Bearish Liquidity Sweep Bullish Liquidity Sweep Bearish FVG Sweep Bullish FVG Sweep Long Signal Short Signal TP 1 TP 2 TP 3 Stop-Loss ‼️Important Notes: TradingView has limitations when running features on multiple timeframes, such as the liquidity levels, which can result in the following error: 🔹Computation Error: The computation of using MTF features are very intensive on TradingView. This can sometimes cause calculation timeouts. When this occurs, simply force the recalculation by modifying one indicator’s settings or by removing the indicator and adding it to your chart again. 🚩 UNIQUENESS: This indicator is unique because it identifies a specific type of liquidity event referred to as FVG Sweeps, where price takes liquidity and then immediately forms a Fair Value Gap in the opposite direction. These FVG Sweeps serve as the foundation of the model, and the script uses them as the required condition for generating Buy and Sell signals. Once an FVG Sweep is confirmed, the indicator automatically produces a fully defined trade idea with a stop-loss and up to three take-profit targets, following a consistent rule-based execution approach.
Chỉ báo Pine Script®
của fluxchart
8