Quant BTC ETH Oversold Indicator $$$ V0001A very powerful indicator for determining high probability of oversold location for btc and eth.
Các mẫu biểu đồ
鲲侯BB-SR汇合 & 动能堆积 (v7.7.3 终极稳定版)鲲侯·决策驾驶舱 (v7.7.3) —— BB-SR汇合与动能堆积分析指标
前言：警报之后，决策开始
当您的 “鲲侯·三引擎融合量化警报系统” 发出警报时，它告诉您：“注意，这里可能存在一个高胜率的交易机会！”
但这仅仅是第一步。下一步的关键问题是：“这个机会的质量究竟如何？现在是最佳的入场时机吗？”
鲲侯·决策驾驶舱 正是为回答这一核心问题而生。它不是一个警报工具，而是一个强大的精细化战术分析仪表盘。当您收到警报后，加载本指标，它将为您提供做出最终决策所需的一切客观信息，将一个模糊的“机会”具象化为一个清晰的“交易计划”。
核心功能：三大客观信息维度
本指标通过三大核心功能，将复杂的图表信息转化为直观、可操作的视觉信号，帮助您快速评估警报质量。
👑 动态多周期SR系统 (Dynamic Multi-Timeframe S/R System)
手动绘制支撑阻力（SR）费时费力，且容易带有主观偏见。本指标的SR系统将彻底将您解放出来。
自动化绘制：它像您的私人助理，自动扫描当前图表、15分钟、30分钟三个周期的关键枢轴点（Pivot Points），并智能筛选、去重后，将最关键的 10 条（可调）SR水平线实时绘制在您的图表上。红色代表阻力，绿色代表支撑。
汇合信号箭头：当价格不仅触及布林带，并且与至少一条自动绘制的SR水平线发生位置汇合时，图表上会出现一个清晰的箭头信号（⬆️/⬇️）。这是“位置 x 结构”的双重确认，极大地提升了信号的可靠性。
💥 “SUPER”跨周期动能堆积侦测 ("SUPER" Cross-Timeframe Momentum Stacking)
市场发动猛烈趋势前，往往会经历一段力量的沉淀与压缩，我们称之为“动能堆积”。这种状态在小周期上难以察觉，但在大周期上却清晰可见。
智能侦测：本指标会实时监控所有更高时间周期（15m, 30m, 1H, 2H, 4H, 1D）的动能状态。
“SUPER”标签：当任一更高周期的动能进入“堆积”状态，同时当前图表价格触及布林带边缘时，图表上会出现一个醒目的“SUPER”标签，并明确标示出是哪个周期（如 SUPER 1H）。
信号解读：想象一根被极致压缩的弹簧。“SUPER”标签的出现，就意味着您在更高时间框架上发现了这样一根“压缩的弹簧”。这预示着一旦价格突破，后续的行情将极具爆发力。这是系统中最强烈的共振信号之一。
🗺️ 布林带价值通道 (Bollinger Bands Value Channel)
布林带是整个分析系统的基础框架，它为您提供了一个动态的“价值地图”，清晰地标示出价格的常规波动区间与潜在的超卖/超买区域。我们所有的信号都构建于价格与布林带的互动之上。
实战工作流程：如何使用本指标决策
请将本指标融入您在 三引擎融合系统 中建立的SOP（标准作业程序）。
① 接收警报 (Receive Alert)
您的任一警报引擎（趋势跟随/第一浪反转/趋势线破坏）发出信号。
② 加载“决策驾驶舱” (Load the "Decision Cockpit")
切换到警报提示的交易品种图表，加载本指标。
③ 寻找“A+级共振信号” (Look for "A+ Resonance Signals")
在图表上寻找以下客观信息的共振叠加，叠加项越多，信号质量越高：
✅ 价格触及布林带上下轨 （基础条件）
✅ SR汇合箭头出现 （位置+结构确认）
✅ “SUPER”动能堆积标签出现 （更高周期力量压缩确认）
✨ A+机会：当箭头和“SUPER”标签（特别是1H及以上周期）同时出现时，代表这是一个结构共振且动能即将爆发的顶级交易机会。
④ 结合微观结构入场 (Enter with Micro-Structure)
在确认这是一个高质量机会后，切换至5分钟图表，寻找一个微观的矩形整理或BOS（结构突破）点，作为您精准的入场依据。
参数设置
pivotLookback: 调整当前图表SR的识别灵敏度。
maxSRLines: 设置图表上最多显示的SR线条数量，保持图表简洁。
maxSRBars: 设置SR线条的有效时间（以K线根数计），避免过时的线条干扰判断。
结论
鲲侯·决策驾驶舱 是您从接收警报到完成交易的桥梁。它通过将复杂的多周期分析过程视觉化、客观化，帮助您快速过滤掉质量不佳的信号，并识别出那些真正值得您投入资金的“A+级”机会。
它的使命，是将一个“可能的警报”升华为一个“高确定性的交易计划”，助您在系统化交易的道路上行稳致远。
✅ English Version (Plain Text, TradingView Compatible)
Kunhou · Decision Cockpit (v7.7.3) — BB-SR Confluence and Momentum Stacking Analysis Indicator
Preface: After the Alert, Decision Begins
When your "Kunhou · Triple-Engine Fusion Quantitative Alert System" triggers an alert, it tells you: "Attention: a high-probability trading opportunity may exist here!"
But this is only the first step. The critical next question is: "How strong is this opportunity? Is this truly the optimal entry moment?"
The Kunhou · Decision Cockpit is designed specifically to answer this core question. It is not an alert tool — it is a powerful tactical analysis dashboard. When you receive an alert, load this indicator, and it will provide all the objective data needed to make your final decision, transforming a vague "opportunity" into a clear, actionable "trade plan."
Core Functions: Three Dimensions of Objective Analysis
This indicator transforms complex chart analysis into intuitive, actionable visual signals through three core functions, enabling rapid assessment of alert quality.
👑 Dynamic Multi-Timeframe S/R System
Manually drawing support and resistance (S/R) is time-consuming and prone to subjective bias. This indicator’s S/R system sets you completely free.
Automated Plotting: Like a personal assistant, it automatically scans pivot points (Pivot Points) from three timeframes — the current chart, 15-minute, and 30-minute — then filters and deduplicates to plot the top 10 (adjustable) S/R levels in real time. Red lines represent resistance, green lines represent support.
Confluence Signal Arrows: When price touches the Bollinger Bands AND aligns spatially with at least one of the system-drawn S/R levels, a clear arrow signal appears (⬆️/⬇️). This is a dual confirmation of “Location × Structure,” greatly enhancing signal reliability.
💥 "SUPER" Cross-Timeframe Momentum Stacking Detection
Before strong trends erupt, the market often undergoes a phase of force consolidation and compression — we call this “Momentum Stacking.” This state is hard to spot on small timeframes, but becomes clear on higher ones.
Smart Detection: The indicator continuously monitors momentum states across all higher timeframes (15m, 30m, 1H, 2H, 4H, 1D).
"SUPER" Label: When momentum on any higher timeframe enters “stacking” mode AND the price touches the Bollinger Band edge, a prominent "SUPER" label appears, specifying which timeframe (e.g. SUPER 1H).
Signal Interpretation: Think of a spring compressed to its limit. The appearance of a "SUPER" label means you've located such a "compressed spring" on a higher timeframe. This suggests that once price breaks, the following move will be highly explosive. It is one of the strongest confluence signals in the system.
🗺️ Bollinger Bands Value Channel
The Bollinger Bands form the foundational framework of the entire analysis system. They provide a dynamic “value map,” clearly marking the normal price range and potential oversold/overbought zones. All our signals are built upon the interaction between price and the Bollinger Bands.
Practical Workflow: How to Use This Indicator for Decision-Making
Integrate this indicator into your SOP (Standard Operating Procedure) established within the Triple-Engine Fusion System.
Step 1: Receive Alert
Your alert engine (Trend-Following, First-Wave Reversal, or Trendline Break) triggers a signal.
Step 2: Load the "Decision Cockpit"
Switch to the chart of the alerted asset and load this indicator.
Step 3: Look for "A+ Resonance Signals"
Look for the convergence of the following objective signals. The more conditions met, the higher the signal quality:
✅ Price touches upper or lower Bollinger Band (base condition)
✅ SR Confluence Arrow appears (location + structure confirmation)
✅ "SUPER" Momentum Stacking Label appears (higher timeframe force compression)
✨ A+ Opportunity: When both the arrow and the "SUPER" label (especially from 1H or higher) appear together, it signals a top-tier opportunity with structural confluence and explosive momentum potential.
Step 4: Enter with Micro-Structure Confirmation
After confirming a high-quality setup, switch to the 5-minute chart and look for a micro consolidation pattern or a BOS (Break of Structure) as your precise entry trigger.
Parameter Settings
pivotLookback: Adjusts sensitivity for pivot detection on the current chart.
maxSRLines: Sets the maximum number of SR lines displayed to keep the chart clean.
maxSRBars: Defines the duration (in bars) for which SR lines remain valid, preventing outdated levels from causing confusion.
Conclusion
The Kunhou · Decision Cockpit is your bridge from receiving an alert to executing a trade. By visualizing and objectifying complex multi-timeframe analysis, it helps you quickly filter out low-quality signals and identify only the true “A+” opportunities worth your capital.
Its mission is to elevate a “possible alert” into a “high-conviction trading plan,” enabling you to trade systematically and sustainably.
Structure Pro+ 2.4 Structure Pro+ 2.4
Summary
Structure Pro+ 2.4 is a comprehensive, all-in-one indicator designed for traders who utilize Smart Money Concepts (SMC). It automates the detection of key market structure events, identifies high-probability trade signals, and incorporates time-based filters to focus on the most volatile trading sessions, helping you make informed decisions with precision and clarity.
This suite goes beyond simple lines on a chart by integrating Market Structure, Fair Value Gaps (FVGs), and institutional trading sessions into a single, powerful tool.
Core Features
📈 Automatic Market Structure
Break of Structure (BOS) & Change of Character (CHoCH): The indicator automatically identifies and labels significant breaks in market structure, allowing you to instantly recognize trend continuations (BOS) or potential reversals (CHoCH).
Customizable Pivot Detection: Fine-tune the sensitivity of the structure detection by adjusting the Left Bars and Right Bars settings to match your trading style and timeframe, from scalping to swing trading.
🎯 High-Probability Breakout Signals
Receive clear BUY and SELL signals based on a powerful confluence of events. A signal only appears when:
A BOS or CHoCH is confirmed.
The breakout move is validated by the creation of a recent Fair Value Gap (FVG), indicating strong momentum.
The signal occurs within a valid, high-volatility time session.
The breakout is confirmed on a closed candle to prevent fakeouts.
🔍 Key Liquidity & Imbalance Zones
Fair Value Gaps (FVGs): Automatically detects and displays FVG (Imbalance) zones on your chart, highlighting key areas of interest where the price may return.
Order Blocks (OBs): Optionally display the last order block before a structural break. The length of the OB box can be customized to keep your chart clean.
🕒 Time-Based Session Filters (Killzones)
Timing is everything. Structure Pro+ 2.4 provides fully customizable time filters to ensure you are only trading in optimal market conditions.
ICT Macro Sessions: Enable and customize standard ICT Macro "Killzone" sessions, which are displayed visually on your chart.
NASDAQ Open Session: A dedicated, customizable session filter for the high-volatility NASDAQ open.
Timezone Synchronization: Set your preferred timezone (America/New_York by default) to align all sessions perfectly, no matter where you are in the world.
⚙️ Full Customization & Alerts
Visuals: Take complete control over the look and feel of the indicator, including colors, line styles, and label sizes.
Alert System: A comprehensive alert system allows you to get notified for every key event:
Signal (BUY/SELL)
BOS or CHoCH
BOS/CHoCH with FVG Confluence
Start of a Macro Session
How to Use
Identify the Trend: Use the automatically plotted BOS and CHoCH labels to determine the current market bias on your chosen timeframe. An uptrend is defined by a series of bullish BOS, while a downtrend is defined by bearish BOS. A CHoCH signals a potential shift in this bias.
Wait for a Signal in a Valid Session: Be patient and wait for a BUY or SELL signal to appear on your chart. Ensure the signal occurs within one of the active, visually-drawn time sessions (Macros or NASDAQ Open) for the highest probability.
Confirm and Manage Risk: Use the signal as a primary point of confluence in your trading plan. For best results, combine it with your own analysis. Always practice proper risk management by setting a stop loss, typically below the low of the swing that caused a BUY signal or above the high of the swing that caused a SELL signal.
Disclaimer: This indicator is a tool designed to assist in trade analysis and should not be considered as financial advice. Trading involves substantial risk, and past performance is not indicative of future results. Always conduct your own research and risk assessment before entering any trade.
Inside Days This script helps us to identify Inside days. Inside days are know as the best consolidation days.
Trading Sessions and Daily Opens by ModishThis Pine Script indicator overlays key forex trading sessions (Sydney, Tokyo, London, New York) on your chart using Kenyan time (EAT/UTC+3), with customizable translucent boxes, borders, and labels positioned neatly above each session for clear visualization. It also plots dotted vertical lines at daily opens (Monday-Friday) with abbreviated day labels for quick reference. Toggle sessions on/off, adjust colors, and ensure seamless integration with candlesticks for dynamic, real-time analysis. Ideal for session-based traders seeking precise timing and structure.
Rejection (Advanced Body+Alert) V6.5I little help to get alerts and visuals for possible rejection candles
Gold Raider Pro [Plazo Sullivan Roche Capital]Core logic
During the London kill-zone, the script locks in the session high/low (LKZ).
After London ends, it looks for a liquidity sweep (price pokes beyond LKZ high/low) then a BOS (break of the first opposing swing) to confirm reversal.
Trades are only valid with higher-timeframe bias (D1 & H4 above/below EMA-50 in agreement).
Optional filters block weak signals: time gate (NY cutoff), ADR (skip if the day’s move is already stretched), and VWAP alignment (Midnight/Weekly/Monthly).
Output is a unified signal: BUY after low sweep + BOS in bull HTF, SELL after high sweep + BOS in bear HTF; labels + dashboard summarize state and reasons.
Best setup & usage
Chart & broker: XAUUSD on a high-liquidity feed (ICMarkets/FXPro/OANDA). Use 2m–5m for executions; confirm with 15m market structure.
Session: Set timezone to America/New_York. Default London kill-zone 02:30–04:30 NY; stop taking new signals after 11:00 NY (toggle in inputs).
HTF bias: Keep EMA length = 50 on D & H4 (default). Only toggle off bias if you’re deliberately testing counter-trend sweeps (not recommended live).
Structure/BOS: Use Swing Length = 3. Leave “Require BOS after the sweep” = ON for the cleanest signals; turn “Require close back inside LKZ” ON only if you want ultra-conservative entries.
VWAP filters: Keep Midnight VWAP = ON; add Weekly/Monthly only on trend days to avoid over-filtering range sessions.
ADR guardrail: Enable ADR filter once you go live; start with ADR Threshold = 0.9 and Lookback 14. This blocks chasing extended moves.
Execution playbook:
BUY: Wait for low sweep of LKZ → BOS up → dashboard shows BULL bias, Time/ADR OK, VWAP pass. Enter on the next pullback or at close; SL below BOS invalidation (or fixed 0.5–0.8× ADR14 of XAU).
SELL: Mirror logic after a high sweep in BEAR bias; SL above BOS invalidation.
TP: Scale at 1R, leave runner to 2–3R or to Midnight/Weekly VWAP touch; hard exit by NY lunchtime or on bias flip.
Risk: 0.25–0.5% per trade (XAU is spiky). One trade per direction per session; if ADR block triggers post-entry, manage to BE or flatten if structure weakens.
Alerts & dashboard: Turn on runtime alerts once parameters are set. Read the Last Signal / Filters row; only act when it shows your direction and “L:OK / S:OK” for your side.
Validation & tuning: Forward-test 3–4 weeks. If over-filtered, relax VWAP Weekly/Monthly first; if too chatty, enforce close-back-inside and keep NY cutoff tight.
Don’ts: Don’t trade during major news spikes, don’t counter the D1/H4 agreement, and don’t enter before BOS—sweeps without structure confirmation are bait.
Monks - SessionsScript that shows the sessions of the market by coloring the candles of each market session as defined by the user. It also shows inside bars, a timer on the left of the screen, it shows if the previous high time frame candle has been gained (1D,1W or 1M). It also shows the days of the week as vertical lines
Fractals & SweepThe Fractals & Sweep indicator is designed to identify key market structure points (fractals) and detect potential liquidity sweeps around those areas. It visually highlights both Bill Williams fractals and regular fractals, and alerts the user when the market sweeps liquidity above or below the most recent fractal levels.
Fractal Recognition:
Detects both bullish (low) and bearish (high) fractals on the price chart.
Users can choose between:
Bill Williams fractal logic (default), or
Regular fractal logic (when the “Filter Bill Williams Fractals” option is enabled).
Fractals are plotted directly on the chart as red downward triangles for highs and green upward triangles for lows.
Fractal Tracking:
The indicator stores the most recent high and low fractal levels to serve as reference points for potential sweep detection.
Sweep Detection:
A bearish sweep is triggered when the price wicks above the last fractal high but closes below it — suggesting a liquidity grab above resistance.
A bullish sweep is triggered when the price wicks below the last fractal low but closes above it — suggesting a liquidity grab below support.
When a sweep occurs, the indicator draws a horizontal line from the previous fractal point to the current bar.
Alert System:
Custom alerts notify the trader when a bearish sweep or bullish sweep occurs, allowing for timely reactions to potential reversals or liquidity traps.
OBR 15min Session Opening Range Breakout + Volume Trend DeltaMLGOBR 15min Session Opening Range Breakout + Volume Trend DeltaMLG
DK FractalsThis is the beginning of the DK Fractal strategy build for futures.
Currently it doesn't have any of the automation as I'm just building the basic framework that the strategy will be built from.
DAMMU CANDEL TYPE🧩 Overview
Detects multiple bullish and bearish candlestick patterns.
Plots visual buy/sell signals and labels on chart.
Sends alerts when patterns appear.
Shows table of enabled/disabled patterns.
✅ Main Features
Bullish patterns: Hammer, Inverted Hammer, Bullish Engulfing, Morning Star, Piercing, Dragonfly Doji.
Bearish patterns: Hanging Man, Shooting Star, Bearish Engulfing, Evening Star, Dark Cloud, Gravestone Doji.
Visuals: Green/red arrows and labels.
Alerts: Optional alerts for bullish/bearish signals.
Table: Shows active pattern status.
⚙️ Improvements Suggested
Move table.new outside if block to prevent recreation every bar.
Adjust label position to avoid overlap.
Add “signal strength” (count multiple patterns same bar).
Add MA confirmation for better accuracy.
Upgrade to Pine Script v6 for better performance.
TwinPulse Q Lead SPY x QQQ Intermarket Pulse 1HTwinPulse Q Lead is a concise one hour indicator for SPY and QQQ that converts three sources of market information into a single pulse line, a mode readout with BUY SELL WAIT, and compact alerts. It blends intermarket leadership between QQQ and SPY, intraday flow from the slope of session VWAP, and where the current price sits inside the regular trading hours range. The three components are normalized, fused, compressed to a stable range, and smoothed for clear thresholds. The aim is a readable intraday regime signal that helps you decide when to participate and when to stand aside.
The script is built with Pine v6, uses request security with lookahead off, and does not repaint. It is an indicator, not a strategy. It does not contain any solicitation, links, or outside references. The description is self contained and explains both logic and use so that any trader can understand the design without reading code.
What makes this original and useful
Intermarket leadership is measured directly from QQQ and SPY on your working timeframe using a Z score of the return spread. When growth is leading value heavy large caps, leadership turns positive. When it lags, leadership turns negative. This gives a real time read of the Nasdaq versus S and P tug of war that most day traders watch informally.
Intraday flow is taken from the slope of the session VWAP. A linear regression of VWAP over a short window captures whether value is rising or falling inside the day. Dividing by ATR normalizes slope by typical movement so that the signal is comparable across weeks.
Session position places price inside the current regular hours high to low. It answers whether the day is trading in the top half, the bottom half, or the middle. This is a simple but powerful context filter for breakouts and fades.
The three components are fused into one pulse, compressed with either hyperbolic tangent or softsign to keep values bounded, and then smoothed by a short EMA. This yields a stable range with a zero line so the eye can read shifts quickly.
The panel shows a human readable mode with reasons and a strength score. Traders who do not want to read lines can rely on a simple state and a compact justification that explains why the state is set.
This is not a mashup that simply overlays unrelated indicators. Each component was chosen to answer a distinct question that is common to SPY and QQQ intraday decision making. Leadership answers who is in charge, flow answers whether value inside the session is building or leaking, and position answers if price is pressing the extremes or circling the middle. The pulse ties the three together and prevents any single component from dominating.
How the calculations work
Leadership. Compute a short rate of change for SPY and QQQ. Subtract SPY from QQQ to get spread returns, then compute a rolling Z score over a longer window. Positive values mean QQQ is leading. Negative values mean SPY is leading.
Flow. Compute session VWAP on the active symbol. Regress VWAP over a short window to obtain a slope estimate. Divide by ATR to scale slope by current volatility so that a small rise on a quiet day is not treated the same as a small rise on a wild day.
Position. Track the highest high and lowest low since the start of regular hours. Place the current close inside that range on a zero to one scale, then recenter to a minus one to plus one scale. Positive means the top half of the day, negative means the bottom half.
Fusion. Multiply each component by a weight so users can emphasize or de emphasize leadership, flow, or position. Sum to a raw pulse.
Compression. Pass the raw pulse through a bounded function. Hyperbolic tangent is smooth and has natural saturation near the extremes. Softsign is faster and behaves like a smoother version of sign near zero. Compression avoids unbounded excursions and makes thresholds meaningful across days.
Smoothing. Apply a short EMA to the compressed pulse to reduce noise. This creates the main line called TwinPulse in the plot.
Thresholds. You can use static symmetric levels or adaptive levels. The adaptive option computes a mean and a standard deviation of the smoothed pulse over a user window, then sets upper and lower thresholds as mean plus or minus sigma times standard deviation. This allows thresholds to adjust across regimes. Static levels are still available for traders who want repeatable levels.
Events and mode. A long event fires when the smoothed pulse crosses the upper threshold with positive flow and any optional filters agree. A short event fires on the symmetric condition. The mode reads the current state rather than fire and forget. It returns BUY when the smoothed pulse is above the upper threshold with positive flow, SELL when the smoothed pulse is below the lower threshold with negative flow, otherwise WAIT. A cooldown controls how often events can fire so alerts do not spam during choppy periods.
Inputs and default values
The script ships with defaults chosen for SPY and QQQ on one hour charts.
Symbols. SPY and QQQ by default. You can switch to any pair. Many users may test IWM versus SPY for small cap reads.
Regular hours selector. On by default. This restricts the position factor to New York regular hours. Turn it off if you prefer full session behavior.
ROC length is three bars. Z score length is fifty bars. VWAP slope window is ten bars. ATR length is fourteen bars. Pulse smoothing length is three bars.
Compression mode. Choose hyperbolic tangent or softsign. Hyperbolic tangent is default.
Weights. Leadership and flow are one by default. Position is set to zero point seven to give a modest influence to where price sits inside the day.
Thresholds. Adaptive thresholds are on by default with a lookback of one hundred bars and a sigma width of zero point eight. Static levels at plus or minus zero point six are ready if you disable adaptive mode.
Filters. ADX filter is off by default. If you enable it, the script requires ADX above a user minimum before it will signal. Higher time frame confirmation is off by default. When enabled it compares the smoothed pulse on the confirm timeframe to zero and requires alignment for longs or shorts.
Cooldown. Three bars by default so that alerts do not trigger too frequently.
UI. Bar coloring is on by default. The panel is on by default and sits at the top right.
All request security calls use lookahead off and will not request future data. All persistent state variables are assigned in a way that prevents repainting. The indicator does not use non standard chart types in its logic.
How to use the indicator
Load a one hour chart of SPY or QQQ. Keep a clean chart so that the script output is easy to read.
Turn on regular hours if you want the session position to reflect the cash session. This is recommended for SPY and QQQ.
Watch the panel. Mode reads BUY or SELL or WAIT. The strength value is a simple vote based score that ranges from zero to one hundred. It counts leadership, flow, ADX if enabled, and higher time frame confirmation if enabled. You can use strength to filter weak states.
Consider action only when mode is BUY or SELL and the signal has not just fired on the last bar. The triangles mark where an event fired. Alerts use the same logic as the events. WAIT means stand aside.
To slow the system, enable ADX and set a higher minimum or enable higher time frame confirmation. To speed it up, disable the filters, disable adaptive thresholds, or tighten the sigma width.
When publishing, use a clean chart with only this indicator. Show the symbol and timeframe clearly and make sure the plot legend is visible. If you add drawings on the chart, only include ones that help readers understand the output.
Publication notes and compliance
This description is written in English. The title uses ASCII and only uses capital letters for common abbreviations. The script is original and explains how and why the components work together. There are no links or promotional material. The script does not claim performance. It does not use lookahead. The panel and alerts exist to help a human read and act with discipline. The indicator can be published as open source or as protected. If you choose protected, the description still allows readers to understand how the logic works without access to the code.
If you later convert the logic into a strategy for publication, use realistic commission and slippage, risk no more than a small share of equity per trade, and choose a dataset that yields a large enough sample. Explain any deviations from these default recommendations in your strategy description. Do not publish results from non standard chart types since they can mislead readers on signal timing.
Limitations and risks
Intermarket leadership is a relative measure. There are hours when both SPY and QQQ fall while leadership remains positive. Treat leadership as a context, not a stand alone trigger.
VWAP slope is a path measure inside the session. It can flip several times on a choppy day. That is why the script uses a short smoothing and an optional cooldown. Use ADX or higher time frame confirmation to avoid the worst chop.
Session position assumes a meaningful regular hours range. On half days or around openings with gaps the position factor can be less informative. If this bothers you, reduce the weight of position or turn it off.
Compression and smoothing introduce lag by design. The goal is stability and clarity. If you want earlier but noisier signals, reduce smoothing and weights, and use static thresholds.
No indicator guarantees future results. TwinPulse Q Lead is a decision aid. It should be combined with your risk rules, position size policy, and a clear exit plan. Past behavior is not a promise for the future.
Frequently asked questions
What symbols are supported. Any symbol can be used as the chart symbol. Leadership uses the two user symbols which default to SPY and QQQ. Many traders may try IWM versus SPY or DIA versus SPY.
Can I change the timeframe. Yes, but the design target is one hour. On very short timeframes the VWAP slope becomes very sensitive and you should consider stronger filters.
Does the script repaint. No. It uses request security with lookahead off and the panel updates on the last bar only. Events are based on bar close conditions unless you attach alerts on any alert function call which will still respect the logic without looking into the future.
How are the strength numbers built. The strength score is the share of aligned votes across leadership, flow, ADX if enabled, and higher time frame confirmation if enabled. A value near one hundred means many filters agree. A value near fifty means partial alignment. It is not a probability or an accuracy number.
Can I use non standard chart types. You can view the indicator on them but do not publish signals from non standard chart types because that can mislead readers about timing. Use classic candles or bars when you publish and when you test.
Why do I sometimes see BUY but the price is not moving. A BUY mode requires pulse above the upper threshold and positive flow. It does not require higher highs immediately. Treat BUY as a permission to look for entries using your own execution rules.
Devil Marks - Multi TimeframeA handy completely new script that shows Devil Marks for several time frames on the current time frame.
Devil Marks are where candles have no wick at one end of the candlestick. These levels are seen as areas that price needs to go back to at some point to re-balance the imbalance. These levels can add confluence to a trade idea.
A table is included that shows the closest devil mark for each time frame.
Devil Marks should show until that level is mitigated by price trading at that level.
FH Max Pain Lines by AssetMax Pain Liquidation Lines - shows you where the most pain is felt by the longs and shorts
DR Volume POC (London Session Selector) - Finalfixed volume profil on the DR range, buy and sell signals for crossing or rejecting POC
Quanloki + ICT Smart Entry (v7.3 Pivot Entry Only + BB)If you need a signal group or team, please contact @quanloki or tele to get support and refund for the VIP group.
Quanloki QQE + Smart TP/SL (v6.1 Entry Option)Version v6.1 has more complete functions. You can choose open next to enter prices faster. For any information about orders or indicators, you can contact tele @Quanloki for instructions and refunds.
ORB indicator with Total Time This script calculates a custom Open Range Breakout (ORB) for a user-defined session start time and duration. Unlike standard ORB indicators, which often use fixed time frames, this script allows precise control over the session length and start, allowing observation of early-session price ranges.
Key Features and Mechanics:
Custom session timing: Set the ORB start hour, minute, and total duration in minutes. The session is anchored to New York time for consistency with NYSE/NASDAQ hours.
Dynamic ORB tracking: The script identifies the high and low of the defined ORB period, updates them in real-time, and optionally extends these lines beyond the session for continuous reference.
Visual clarity: Highlights the ORB zone during the session and allows adjustable line thickness for better visibility across charts.
Breakout alerts: Integrated alert conditions notify traders when price crosses above the ORB high or below the ORB low. Alerts are optional and configurable.
Usefulness:
Not a simple replication: While ORB scripts exist, this script combines customizable session duration, visual zone highlighting, extendable lines, and breakout alerts in a single tool.
Trader insight: Provides clear visual context and early-session breakout monitoring, making traders observe price action dynamics.
How It Works Conceptually:
The script calculates a session start timestamp based on the user-defined hour and minute.
Bars within the session are tracked to determine the highest high and lowest low.
After the session, the ORB high and low can either remain visible (extendORB = true) or disappear.
Alerts trigger when price crosses these levels, allowing users to act on potential breakouts.
This script is intended to provide visual and analytical guidance for early-session price ranges. It does not make performance claims and is based entirely on chart data. Results are not guaranteed and is intended for educational purposes only.
369 Candle Highlighter - Customizable. [V1]The final 3/6/9 Candle Highlighter is a TradingView indicator that scans each candle’s time in a user-selected timezone, calculates the sum of all digits in the hour and minute, reduces that sum to a single digit, and highlights the candle in a chosen color with customizable transparency whenever the result equals 3, 6, or 9. Users can select their timezone, pick the highlight color, adjust transparency, enable optional tiny wicks above or below the candle, turn on alerts with custom messages for each number, and activate a debug mode that shows the reduced digit and candle time. This ensures that only the correctly calculated 3/6/9 candles are visually marked on the chart while allowing full customization for aesthetics, performance, and alerting preferences.
Ram HTF Direction & Market ProfileRam HTF Direction & Markey Profile.
I am trying to identify the HTF(Daily) Direction and Market profiles POC,VAL,VAH to trade on 1HR.
