Bắt đầu

Chỉ số Dòng tiền (MFI)

Dr. Pengu Legacy Neon AMO V5 (Adaptive Momentum Oscillator)🌈⚡ Dr. Pengu Legacy Neon AMO V5 (Adaptive Momentum Oscillator) Dr. Pengu Legacy Neon AMO V5 is a neon, crypto-tuned Adaptive Momentum Oscillator suite engineered to visualize: ✅ Momentum Shifts ✅ Trend Strength ✅ OB/OS Exhaustion ✅ Divergences (Regular + Hidden) ✅ Money Flow ✅ Volume Pressure All in one layered system — optimized for scalping, intraday, and swing trading in high-volatility markets. 🧠 MASTER CONTROL PANEL Toggle modules ON/OFF for clarity and performance: 🟢 Pengu AMO → Core adaptive momentum engine 🧵 AMO Ribbon → Trend pressure ribbon 🌫️ AMO Heatmap → OB/OS background intensity 🧨 AMO Divergences → Reversal + continuation detection 🔫 Power Laser → Exhaustion peak printer 🚦 OB OS Signal → Step markers + OB/OS letters 🧲 Pengu MFI → Zero-centered money flow 📊 Volume → Neon pressure wave module ⚡ MODULE 1 — Pengu AMO (Adaptive Momentum Engine) Two adaptive lines: 💠 AMO1 (Fast) → impulse momentum 🔷 AMO2 (Slow) → structural baseline 📈 Above 0 → bullish control 📉 Below 0 → bearish control 🔁 Crossovers → momentum transition 🔥 Steeper slope = acceleration The adaptive scaling keeps the oscillator responsive while reducing distortion in extreme volatility. 🟩🟥 OB/OS FRAMEWORK 🟢 Zone Levels → early warning 🔴 Extreme Levels → exhaustion risk These zones dynamically power: Heatmap intensity OB OS Signals Divergences Power Laser The deeper the extreme, the stronger the reversal probability. 🧵 AMO RIBBON 🌊 Expanding ribbon → strengthening trend 🧯 Contracting ribbon → weakening trend 🧭 Flip in color → bias transition Designed to help you stay inside trends instead of reacting late. 🌫️ AMO HEATMAP Background glow representing conviction. 🟢 Green intensity → bullish pressure 🔴 Red intensity → bearish pressure ✨ Stronger glow = deeper zone + stronger momentum Acts as a visual conviction meter. 🧲 Pengu MFI (Money Flow) Zero-centered gradient flow. 🟢 Above 0 → bullish flow dominance 🔴 Below 0 → bearish flow dominance 🌑 Flat/dim → low conviction Best used as confirmation for AMO direction. 📊 Volume (Pressure Engine) A directional pressure wave combining: Relative volume Candle positioning Smoothing + normalization 🟢 Rising green wave → increasing bullish pressure 🔴 Rising red wave → increasing bearish pressure 🌑 Dark zone → low conviction Built to highlight pressure, not just raw volume. 🔫 Power Laser (Exhaustion Detection) Neon horizontal lasers print when: OB runs peak OS runs bottom Pivot exhaustion confirms 🟢 OB Laser → bullish run likely peaked 🔴 OS Laser → bearish run likely bottomed Strongest when stacked with Divergence + weakening Ribbon. 🚦 OB OS Signal Step-ladder exhaustion tracker. 🟧 Markers print as oscillator progresses deeper 🔶 OB/OS letters appear when threshold reached More steps = stronger exhaustion development. 🧨 Divergence Engine Regular Divergence (Reversal) 🟢 Price LL + AMO HL 🔴 Price HH + AMO LH Hidden Divergence (Continuation) 🟢 Price HL + AMO LL 🔴 Price LH + AMO HH Strength-based staging adjusts glow + thickness automatically. 🧭 STRATEGY STACKS 🔥 Reversal Setup Extreme Zone Strong Heatmap OB OS Signal Divergence Power Laser ➡ High-probability exhaustion region 📈 Continuation Setup AMO bias intact Ribbon expanding Volume aligned Hidden divergence ➡ Trend continuation 🧊 Chop Filter Weak heatmap Flat MFI Muted volume ➡ Reduce size / stand aside ✨ Inspiration & Credits This project was inspired by the pioneering oscillator concepts introduced by LazyBear, whose open-source WaveTrend work significantly shaped modern momentum analysis. Visual design philosophy and pressure-based momentum concepts were influenced by tools and presentation styles popularized by ChartPrime, particularly in the areas of visual clarity, staged divergences, and adaptive pressure rendering. Dr. Pengu Legacy Neon AMO V5 is an independent implementation built from the ground up, combining adaptive scaling, crypto-specific tuning, and modular architecture into a unified system.
Chỉ báo Pine Script®
của Dr_Pengu
Ichi's Indicator🔥 ICHI'S INDICATOR 🔥 Purchase Here: whop.com 🧠 Trade With A+ R/R Always Size Appropriately 🟢 Green Arrow UP = Bullish 🔴 Red Arrow Down = Bearish ❌ End Previous Signal (Bear or Bull) ➡️ Yellow X's That Don't Change Ribbon Color Are Not Signals To Exit. ➡️ Yellow X's Are Overbought Oversold Signals. Chop Can Occur Here. 🎯 Best Use Case ✅ Capture more of the move. Exit before the drops. ✅ 1-5 Minute - Scalps (1,3,5 minute best) ✅ 1-8 Hour - Swings (1, 3, 8 hour best) ✅ 2-4 Day - Long term (2, 3, 4, 7 day best) ✔ Any Timeframe (Lower for Entries / Higher for Trends) ✔ Momentum Scalping ✔ Trend Continuation/Verification ✔ Any Asset Class -------------------- ✋ Yellow Ribbon Areas = Indecision in the market ❓ Expect chop after a good trend and a yellow band appears. ❓ Trade with caution / wait for confirmation ❓ Back to back signals will be present in these areas 🧠 How the Logic Works ✅ Uses RSI + MFI alignment to confirm momentum ✅ Requires price confirmation (EMA-based) ✅ Filters weak moves using momentum strength ✅ Detects trend exhaustion (not just time-based exits) ✅ Uses ATR-based dynamic ribbon that moves with price ✅ No repainting ✅ Clean entry & exit logic -------------------- 📈 Bullish Entry Conditions 🟢 RSI + MFI rising 🟢 Momentum expansion 🟢 Price above EMA 🟢 Strength confirmation (no fake breakouts) ➡️ Displays a green triangle when a valid long trend starts -------------------- 📉 Bearish Entry Conditions 🔴 RSI + MFI falling 🔴 Momentum acceleration down 🔴 Price below EMA 🔴 Weakness confirmation ➡️ Displays a red triangle when a short trend starts -------------------- ❌ Exit Logic (Very Important) ⛔ Yellow Bands = Chop Likely ⛔ Momentum fades ⛔ RSI loses strength ⛔ ATR contracts (trend exhaustion) ➡️ Shows an ❌ exit marker Indicator is no guarantee of profit. Nothing can be 100% accurate all the time. This tool will help you in many ways with your trading. Staying in a trade longer and cutting losses early are the main 2 aspects of this indicator that will help you make and keep more money! Trade with more confidence with Ichi's Indicator.
Chỉ báo Pine Script®
của Ichi-TP
stelaraX - MFIstelaraX – MFI stelaraX – MFI is a volume-weighted momentum oscillator that combines price movement and trading volume to measure buying and selling pressure. Unlike pure price-based oscillators, the Money Flow Index incorporates volume, making it especially useful for identifying strength behind price moves. This indicator is part of the stelaraX ecosystem, focused on clean technical analysis and AI-supported chart evaluation stelarax.com Core logic The Money Flow Index is calculated using the typical price (HLC3) and volume over a user-defined lookback period. The calculation distinguishes between positive and negative money flow and converts the result into an oscillator ranging from 0 to 100. Key components include: * MFI value between 0 and 100 * overbought threshold to identify excessive buying pressure * oversold threshold to identify excessive selling pressure High MFI values indicate strong inflows of capital, while low values indicate capital outflows. Visualization The script plots: * the MFI line in a separate indicator pane * a configurable overbought level * a configurable oversold level The area between overbought and oversold levels is visually highlighted, allowing quick recognition of extreme money flow conditions. Use case This indicator is intended for: * identifying overbought and oversold conditions with volume confirmation * spotting potential reversals driven by volume imbalance * confirming price trends with underlying money flow * divergence analysis between price and volume-based momentum * filtering trades based on participation strength For traders who want to combine price action with volume-aware, AI-driven chart analysis, additional tools and insights are available at stelarax.com Disclaimer This indicator is provided for educational and technical analysis purposes only and does not constitute financial advice or trading recommendations. All trading decisions and risk management remain the responsibility of the user.
Chỉ báo Pine Script®
của stelaraX_official
Money Flow Index - MFI🎯 Overview This is an advanced Money Flow Index - MFI indicator that combines volume-weighted momentum analysis with dynamic moving average filtering. Unlike basic MFI implementations, this version features gradient overbought/oversold zones, multiple color themes, and a clear signal dashboard for precise money flow identification. 🧩 Core Components 1. ⚙️ Technical Foundation 📊 Primary Calculation: Uses TradingView's built-in ta.mfi() function which incorporates both price and volume data 📈 Dual Analysis Components: MFI Line: Volume-weighted momentum oscillator MA Filter: Customizable moving average acting as dynamic signal line Threshold Zones: Gradient fills for overbought and oversold conditions ⚡ Volume Integration: Unique ability to combine price action with trading volume for more reliable signals 2. 🎛️ Configuration Parameters 📏 MFI Length: Default 14 periods (standard setting) 🔄 MA Filter Settings: Length: Customizable (default 365 periods) Type: 6 options available (EMA, SMA, RMA, WMA, VWMA, HMA) 🎨 Color Themes: 5 visual schemes consistent with your indicator suite: Classic, Modern, Robust, Accented, Monochrome 📊 Signal Interpretation: 🟢 BULLISH: MFI > MA Filter (money flow above trend) 🔴 BEARISH: MFI < MA Filter (money flow below trend) ⚠️ OVERBOUGHT: MFI > 80 (potential reversal zone) ⚠️ OVERSOLD: MFI < 20 (potential reversal zone) 3. 🎨 Visual Elements 🚨 Gradient Zones: Overbought zone : Red gradient intensifying toward 100 Oversold zone : Green gradient intensifying toward 0 📋 Dashboard Display: Top-right status indicator showing "⬆️ Bullish" or "⬇️ Bearish" 📊 Dynamic Coloring: MFI line changes color based on position relative to MA ⚡ Trading Applications 📈 Primary Uses: 🎯 Money Flow Direction: MFI > MA = Bullish money flow regime MFI < MA = Bearish money flow regime 💪 Trend Strength with Volume Confirmation: MFI considers both price movement AND volume Higher volume moves have more significance Validates price trends with volume support 🚨 Extreme Zone Signals: Overbought: MFI > 80 (potential sell opportunity) Oversold: MFI < 20 (potential buy opportunity) 📊 Zone Analysis: 🔴 Overbought Zone : Red gradient fills Indicates excessive buying pressure Watch for bearish reversals 🟢 Oversold Zone : Green gradient fills Indicates excessive selling pressure Watch for bullish reversals 🟡 Equilibrium: Yellow MA line acts as volume-weighted trend filter 🎨 Customization Options 👁️ Display Features: 📊 Dual Components: Always shows both MFI line and MA filter 🎨 Gradient Visualization: Automatic fill for overbought/oversold conditions 📋 Status Dashboard: Clear bullish/bearish money flow indication 📈 Customizable MA: Choose from 6 different moving average types 🎨 Visual Themes: (Consistent suite) 🎨 Classic: Green/Red (traditional volume-weighted colors) 🚀 Modern: Cyan/Purple (contemporary) 💪 Robust: Amber/Deep Purple (high contrast) 🌈 Accented: Purple/Magenta (vibrant) ⚫⚪ Monochrome: Light Gray/Dark Gray (minimalist) 🔔 Alert System 🟢 LONG Alert: Triggers when MFI crosses above MA 🔴 SHORT Alert: Triggers when MFI crosses below MA 📧 Format: Includes ticker symbol for tracking ⚡ Key Advantages ✅ Strengths: 🎯 Volume-Weighted Accuracy: Combines price and volume for more reliable signals 💪 Overbought/Oversold Filter: Built-in 80/20 thresholds with gradient visualization 👁️ Clear Trend Identification: MA filter separates noise from meaningful money flow 🔄 Flexible Configuration: Multiple MA types for different trading styles 📊 Professional Dashboard: Immediate money flow status recognition 📊 Optimal Settings: ⚡ Short-term Trading: MFI Length 10-14, MA Length 20-50 📊 Medium-term Trading: MFI Length 14-20, MA Length 50-100 📈 Long-term Trading: MFI Length 20-30, MA Length 100-365 🏆 Unique Features: 🎯 Volume Integration: The only oscillator in your suite that includes volume data 📊 Gradient Thresholds: Visual intensity shows proximity to extremes 🎨 Consistent Design: Matches your indicator family aesthetics 📋 Money Flow Dashboard: Quick visual confirmation of volume trends 🔧 Dual Analysis: Combines oscillator with dynamic trend filter 🔄 Trading Strategies 1. Basic Money Flow Strategy: Go LONG when MFI crosses above MA from oversold Go SHORT when MFI crosses below MA from overbought Exit when opposite extreme is reached 2. Divergence Detection: Price makes higher high, MFI makes lower high → Bearish divergence (selling pressure weakening) Price makes lower low, MFI makes higher low → Bullish divergence (buying pressure increasing) 3. Volume Confirmation: Strong trend + rising MFI = High conviction move Weak trend + declining MFI = Potential reversal 📈 Performance Tips Volume Matters: MFI is most effective in markets with consistent volume Extreme Zones: levels often act as support/resistance for the indicator Divergence Signals: More reliable than simple overbought/oversold readings Trend Alignment: MFI above MA in uptrend, below MA in downtrend Confirmation: Combine with price action at key support/resistance levels This enhanced MFI indicator provides professional-grade volume-weighted analysis with intuitive visualization, allowing traders to identify money flow trends, spot potential reversals at extremes, and filter signals through the customizable moving average for higher accuracy trading decisions! 📊💰
Chỉ báo Pine Script®
của Tiagorocha1989
Blockcircle Global Central Bank Balance Sheet and Money SupplyOVERVIEW This indicator aggregates money supply (M2) and central bank balance sheet data from the world's largest economies into a single, unified view of global liquidity conditions. Rather than manually tracking dozens of separate data feeds or building your own aggregation logic, you get a ready-to-use tool that pulls from FRED, TradingView Economics, and real-time FX rates to convert everything into USD terms automatically. Global liquidity has historically served as a leading indicator for risk assets. When central banks expand their balance sheets and the money supply grows, capital tends to flow into equities, crypto, and other risk-on assets. When liquidity contracts, markets often follow. This indicator gives you that macro context directly on your chart. The global liquidity movement (expansionary or contractionary) often leads to asset price appreciation/depreciation in CRYPTOCAP:BTC , SP:SPX , etc WHAT MAKES IT ORIGINAL AND DIFFERENT Combines both M2 money supply AND central bank balance sheet data in one place, whereas most existing tools focus on only one metric Aggregates 11 economies for M2 (USA, EU, China, Japan, UK, Canada, India, Russia, Brazil, Australia, Switzerland) and 10 central banks for balance sheet data Automatically handles currency conversion using live FX rates so all values display in USD Includes a dedicated US Net Liquidity calculation (Fed Balance Sheet minus Reverse Repo minus TGA) which filters out temporary distortions that other aggregate tools ignore Provides granular country by country breakdown in the information table so you can identify which central banks are driving the aggregate trend Offers four moving average types (SMA, EMA, WMA, RMA) for trend smoothing with configurable length HOW IT WORKS The indicator requests monthly M2 data from TradingView's Economics feeds for each included country. Central bank balance sheet data is pulled the same way. All non-USD values are converted using daily FX rates from major currency pairs. The script then sums these converted values to produce the Global M2 and Global CBBS lines. For US liquidity specifically, the script pulls weekly data for the Reverse Repo Program (RRP) and Treasury General Account (TGA) from FRED. Net Liquidity is calculated as: Fed Balance Sheet minus RRP minus TGA. This formula removes funds parked in reverse repos and Treasury cash balances, showing what is actually circulating in the financial system. KEY FEATURES Global M2 Money Supply line tracking 11 major economies with individual toggles for each country Global Central Bank Balance Sheet line tracking 10 central banks with individual toggles US-specific components, including Reverse Repo, TGA, and Net Liquidity as separate plot lines Moving average overlays with selectable type and length for identifying trend direction Fill the option between M2 and CBBS lines to visualize the gap between money supply and central bank assets Value labels at line endpoints showing current readings and period-over-period percentage change Comprehensive information table with optional country breakdown view Full color customization for all lines, configurable line width, and style options Alert conditions for significant M2 and CBBS changes plus MA crossover signals HOW TO USE Add to any chart and observe the overall direction of global liquidity. Rising lines generally support risk on positioning, while declining lines suggest caution Watch for divergences between the M2 and CBBS lines. If money supply grows faster than central bank assets, private credit may be expanding. If CBBS rises faster, central banks are actively injecting liquidity Use the US Net Liquidity line to understand short term dollar liquidity conditions separate from longer term global trends Enable moving averages to filter noise and identify when liquidity trends are changing direction Toggle individual countries on or off in the settings to see how specific regions contribute to the total Reference the information table for exact values and percentage changes without leaving your chart SETTINGS BREAKDOWN Table Settings: position, text size, and whether to show the country breakdown Display Settings: toggle visibility for each line, fill area, value labels, percent labels, and the info table Line Styling: customize colors for each metric, adjust line width, and select solid, dashed, or dotted style Moving Average: enable or disable MA overlays for M2 and CBBS, select MA type, and set length Global M2 Countries: individually enable or disable each of the 11 economies US Liquidity Components: toggle RRP and TGA data Global CBBS Countries: individually enable or disable each of the 10 central banks Alerts: set percentage threshold for change based alerts IMPORTANT CONSIDERATIONS Data updates depend on the publication schedule of each source. M2 and CBBS data are typically monthly with some delay. US Fed Balance Sheet, US RRP and US TGA update weekly FX conversion uses daily close rates which may introduce minor discrepancies during volatile currency periods Some emerging market data may have longer reporting lags than developed market data Hope you find it useful and impactful to your trading and investment decisions! If you have any questions at all, please just ask, happy to help
Chỉ báo Pine Script®
của blockcircle
Blockcircle GLS - Global Liquidity ScorecardOVERVIEW The BLOCKCIRCLE GLOBAL LIQUIDITY SCORECARD(GLS) is a professional-grade macro liquidity monitoring system built for traders who base positioning decisions on monetary conditions. The simplest application involves tracking the global M2 money supply forward projected 10 to 14 weeks, which provides a reasonably accurate forecast of risk asset price direction like BTC or leading Tier 1 stocks. This scorecard helps you identify whether monetary conditions support risk-on or risk-off positioning across short and long timeframes. HOW TO USE IT When net liquidity is positive and rising with green signals, when M2 is expanding, and when the majority of central banks are easing, consider long positional bias with expectations of rising asset prices. When net liquidity is negative or falling with red signals, when M2 is contracting, and when central banks are tightening, consider defensive positioning or short bias with expectations of declining asset prices. Use the forward projected M2 overlay to anticipate where Bitcoin and S&P 500 prices may trend in the coming weeks. Monitor the funding rate section for stress signals that often precede major market moves. Watch the automated regime detection status which classifies conditions as CRITICAL, TIGHT, NEUTRAL, or AMPLE based on rate relationships. WHAT MAKES IT ORIGINAL AND DIFFERENT This is not a simple M2 chart overlay. The GLS aggregates liquidity data from seven major economies, converts everything to USD using live FX rates, and calculates US Net Liquidity using the formula (Fed Balance Sheet minus RRP minus TGA). The scorecard normalizes all metrics across timeframes with multi-period percentage changes at 1P, 2P, 3P, 5P, 10P, 20P, and 50P intervals, giving you trend strength context that single-value displays cannot provide. The proprietary Monetary Policy Scorecard evaluates each major central bank on a 0 to 100 scale based on balance sheet and money supply changes, then aggregates a global score. This lets you see at a glance whether worldwide policy is easing, neutral, or tightening. The automated liquidity regime detection for short-term funding rates classifies conditions as CRITICAL, TIGHT, NEUTRAL, or AMPLE based on the relationship between SOFR, IORB, and Fed Funds boundaries. The dashboard presents all data in a unified scorecard format with color-coded percentage changes, moving average comparisons, status classifications, and signal indicators for each metric. This consolidation eliminates the need to monitor multiple separate indicators or data sources. CORE LIQUIDITY METRICS Global M2 Money Supply aggregated from US, EU, Japan, China, UK, Canada, and Australia with live USD conversion. Global Central Bank Balance Sheet tracking across all major economies. US Net Liquidity calculation providing the critical liquidity measure that correlates with risk asset performance. Reverse Repo (RRP) monitoring showing cash parked at the Fed and its drain rate. Treasury General Account (TGA) tracking government spending and building patterns. Multi-period percentage change columns showing momentum across 1P through 50P timeframes. SHORT-TERM FUNDING RATE MONITORING Overnight Lending Rate (SOFR) displayed as the white line on the chart with real-time values. 30-Day Lending Rate Average for smoothed trend analysis. Bank Reserve Rate (IORB) serving as the Fed anchor rate shown in pink. Fed Rate Ceiling and Floor boundaries visualized as the blue-filled corridor on the chart. Actual Fed Rate (EFFR) showing where rates actually trade. Automated regime classification displayed in the STATUS column based on rate relationships. FED OPERATIONS TRACKING Fed Emergency Lending (Standing Repo Facility) usage as a stress indicator with DORMANT, ACTIVE, ELEVATED, or HIGH STRESS classification. Fed Treasury Holdings showing bond portfolio changes with ADDING or DRAINING status. Fed Total Assets for overall balance sheet direction. Dollar Strength Index with inverted signal logic for liquidity interpretation. MONETARY POLICY SCORECARD Individual country scores for US, Japan, EU, China, and UK on a 0 to 100 scale displayed in the VALUE column. Scoring based on 3-period changes in both central bank balance sheets and M2 money supply. Global aggregate score highlighted with EASING, NEUTRAL, or TIGHTENING classification. Multi-period percentage changes for each country to identify acceleration or deceleration in policy stance. MARKET AND RATIO ANALYSIS Bitcoin, Total Crypto, and S&P 500 market cap tracking with BULLISH, BEARISH, or NEUTRAL trend classification. BTC/M2 Ratio showing Bitcoin performance relative to money supply growth with OUTPERFORM or UNDERPERFORM status. SP500/M2 Ratio for equity valuation against liquidity expansion. Liquidity Velocity measuring how efficiently money supply translates to net liquidity with OVERHEATING, NORMAL, or SLUGGISH classification. CONFIGURABLE ALERTS ENGINE Net Liquidity vs MA alerts with customizable operators including crosses above, crosses below, and threshold comparisons. Fed Balance Sheet consecutive increase or decrease alerts over configurable periods. RRP threshold alerts for drain completion monitoring. TGA change percentage alerts for spending or building events. M2 growth acceleration or deceleration alerts. SOFR above IORB alert for tight liquidity conditions. SOFR above Fed Funds ceiling alert for critical stress conditions. CHART PLOTTING OPTIONS Toggle individual plots for all liquidity metrics, funding rates, market caps, and ratios. Forward projected M2 overlay with configurable week offset from 0 to 52 weeks. Fed Funds corridor visualization with filled area between ceiling and floor as shown in the blue shaded region. Automatic end-of-chart labels showing current values for all active plots. DASHBOARD CONFIGURATION Adjustable table position with options for all corners and middle positions. Text size options from tiny to large for different screen configurations. Toggle visibility for each section independently, including Liquidity Metrics, Short-Term Funding, Fed Operations, Market Prices, Monetary Policies, Liquidity Ratios, and Summary. Select which countries to include in global M2 and central bank balance sheet aggregations. Choose between SMA and EMA for all moving average calculations with configurable length. SUMMARY PANEL The GLS Summary section at the bottom of the dashboard provides a consolidated view combining liquidity trend, funding conditions, policy stance, and market sentiment into a single status line. Below that, plain-language interpretations explain whether the Fed is adding or draining liquidity, whether cash is returning to or exiting markets via RRP, and whether Treasury is spending or building reserves. LIMITATIONS AND CONSIDERATIONS Economic data updates on varying schedules. M2 data is typically monthly, central bank balance sheets are weekly, and funding rates are daily. The indicator uses the most recent available data point. FX conversion introduces some noise during periods of extreme currency volatility. Forward M2 projection is a time-shifted overlay of historical data, not a predictive model. It works because liquidity changes tend to lead asset prices by several weeks, but this relationship is not guaranteed. The Monetary Policy Score is a simplified heuristic. Actual central bank policy involves many factors beyond balance sheet and M2 changes. Past correlations between liquidity and asset prices do not guarantee future results. RECOMMENDED TIMEFRAMES The scorecard is designed for macro analysis on daily, weekly, and monthly charts. Shorter timeframes are meant to track short-term funding rates daily, and the other fields will show the same underlying data but may not provide additional signal value given the update frequency of economic and quantitative data sources.
Chỉ báo Pine Script®
của blockcircle
Smart Money Flow Signals [QuantAlgo]🟢 Overview The Smart Money Flow Signals indicator synthesizes significant volume-price dynamics through multi-component analysis to identify potential accumulation and distribution phases driven by substantial market participants. It combines Money Flow Index momentum, Chaikin Money Flow accumulation patterns, volume-weighted price momentum, and buying/selling pressure metrics into a unified composite oscillator that quantifies periods of concentrated capital movement, helping traders and investors identify conditions where significant volume participants may be actively positioning across multiple market conditions and timeframes. 🟢 How It Works The indicator's core methodology lies in its weighted composite approach, where multiple volume-price components are calculated sequentially and then integrated to create a comprehensive significant flow activity signal. First, the Money Flow Index (MFI) is calculated to measure buying and selling pressure by incorporating volume into price momentum analysis: raw_money_flow = source * volume positive_flow = source >= source ? raw_money_flow : 0 negative_flow = source < source ? raw_money_flow : 0 positive_money_flow = math.sum(positive_flow, mfi_period) negative_money_flow = math.sum(negative_flow, mfi_period) money_flow_index = 100 - 100 / (1 + positive_money_flow / negative_money_flow) This creates an RSI-style momentum indicator that tracks whether money (price × volume) is flowing into or out of the asset, with values ranging from 0 to 100 where readings above 50 suggest buying pressure dominance. Then, Chaikin Money Flow (CMF) is computed to evaluate accumulation and distribution by analyzing where prices close within each bar's range, weighted by volume: money_flow_multiplier = high != low ? (close - low - (high - close)) / (high - low) : 0 money_flow_volume = money_flow_multiplier * volume volume_sma = ta.sma(volume, trend_period) chaikin_money_flow = volume_sma != 0 ? ta.sma(money_flow_volume, trend_period) / volume_sma : 0 Positive CMF values indicate accumulation (closes near the high of the range), while negative values indicate distribution (closes near the low of the range), with volume weighting emphasizing periods of significant participation. Next, Volume Analysis is performed to quantify current volume intensity relative to historical averages: volume_average = ta.sma(volume, trend_period) volume_strength = volume_average != 0 ? volume / volume_average : 1 volume_weight = math.log(volume_strength + 1) The logarithmic transformation creates a volume weight that amplifies signals during high-volume periods while preventing extreme volume spikes from overwhelming the composite calculation. Following this, Buy/Sell Pressure is quantified by comparing cumulative volume during bullish versus bearish candles: buying_pressure = math.sum(volume * (close >= open ? 1 : 0), trend_period) selling_pressure = math.sum(volume * (close < open ? 1 : 0), trend_period) pressure_ratio = (buying_pressure - selling_pressure) / (buying_pressure + selling_pressure) * 100 This creates a directional pressure ratio that reveals whether significant participants are predominantly buying or selling, expressed as a percentage between -100 (all selling) and +100 (all buying). Then, Volume-Weighted Momentum is calculated through an exponential smoothing channel that adjusts price deviation based on volume intensity: exponential_smooth_average = ta.ema(source, momentum_channel_period) deviation = ta.ema(math.abs(source - exponential_smooth_average), momentum_channel_period) channel_index = deviation != 0 ? (source - exponential_smooth_average) / (0.015 * deviation) * (1 + volume_weight * 0.5) : 0 This channel index measures how far price has deviated from its exponential average relative to typical deviation, with the volume weight multiplier (1 + volume_weight * 0.5) amplifying the signal when significant volume accompanies the price movement. Finally, the Composite Wave is constructed by combining all components with specific weighting to create the final oscillator: momentum_wave = ta.ema(channel_index, trend_period) money_flow_wave = (money_flow_index - 50) * 1.2 chaikin_flow_wave = chaikin_money_flow * 100 composite_wave = momentum_wave * 0.5 + chaikin_flow_wave * 0.3 + money_flow_wave * 0.2 smoothed_wave = ta.sma(composite_wave, signal_smoothing) This creates a multi-dimensional volume flow oscillator that combines price-volume momentum, accumulation-distribution patterns, and buying-selling pressure into a single signal, providing traders with probabilistic insights into periods of concentrated market activity and directional bias based on weighted component convergence. 🟢 Signal Interpretation ▶ Positive Values (Above Zero, Green): Composite money flow above equilibrium indicating net accumulation pressure, positive buying volume dominance, and bullish volume-price alignment = Favorable conditions for long positions, significant capital flowing into the asset = Buy/hold opportunities ▶ Negative Values (Below Zero, Red): Composite money flow below equilibrium indicating net distribution pressure, negative selling volume dominance, and bearish volume-price alignment = Unfavorable conditions for long positions, significant capital flowing out of the asset = Sell/short opportunities ▶ Extreme Overbought Zone: Excessive bullish money flow indicating potential accumulation exhaustion, where buying pressure may have reached unsustainable levels with elevated reversal risk = Caution on new longs, potential distribution phase beginning, profit-taking zone for existing positions ▶ Extreme Oversold Zone: Excessive bearish money flow indicating potential distribution exhaustion, where selling pressure may have reached unsustainable levels with elevated reversal risk = Caution on new shorts, potential accumulation phase beginning, buying opportunity zone for contrarian entries ▶ Smoothed Trend Line (White) Alignment: When the smoothed trend line confirms the composite wave direction, it validates the underlying volume-price trend and filters false signals caused by short-term noise ▶ Volume Intensity Correlation: Gradient intensity (color saturation) reflects combined wave strength, volume participation, and directional alignment, where darker/more saturated colors indicate stronger concentrated activity and higher-probability directional moves 🟢 Features ▶ Preconfigured Presets: Three optimized parameter configurations accommodate different trading styles, timeframes, and market analysis approaches. 1. "Default" provides balanced volume flow measurement suitable for swing trading on 4-hour and daily charts, offering moderate responsiveness to money flow shifts with standard RSI-equivalent MFI period and moderate smoothing for most market conditions. 2. "Fast Response" delivers heightened sensitivity optimized for active intraday trading and scalping on 1-minute to 1-hour charts, using compressed calculation periods across all components and minimal smoothing to capture rapid volume flow changes and quick trend shifts as they develop, ideal for early entry/exit opportunities with acceptance of increased signal frequency during consolidation. 3. "Smooth Trend" offers conservative extreme identification ideal for position trading and long-term analysis on daily to weekly charts, employing extended periods across all money flow components with substantial smoothing to filter short-term noise and isolate only strong, sustained accumulation and distribution phases driven by significant volume participants. ▶ Built-in Alerts: Seven alert conditions enable comprehensive automated monitoring of significant money flow transitions and extreme market states. 1. "Bullish Flow" triggers when the composite wave crosses above zero, signaling the shift from distribution to accumulation and concentrated buying activity beginning. 2. "Bearish Flow" activates when the composite wave crosses below zero, signaling the shift from accumulation to distribution and concentrated selling activity starting. 3. "Any Flow Direction Change" provides a combined notification for either bullish or bearish crossover regardless of direction, useful for general money flow momentum shifts. 4. "Extreme Overbought" alerts when the composite wave reaches or exceeds the overbought threshold (default +60), indicating excessive buying pressure and potential exhaustion. 5. "Extreme Oversold" notifies when the composite wave reaches or falls below the oversold threshold (default -60), indicating excessive selling pressure and potential capitulation. 6. "Overbought Reversal" triggers specifically when the wave crosses back down through the overbought level after being extended, signaling the beginning of distribution from extreme levels. 7. "Oversold Reversal" activates when the wave crosses back up through the oversold level after being extended, signaling the beginning of accumulation from extreme levels. ▶ Color Customization: Six visual themes (Classic, Aqua, Cosmic, Ember, Neon, plus Custom) accommodate different chart backgrounds and visual preferences, ensuring optimal contrast and immediate identification of bullish versus bearish volume flow conditions across various devices and screen sizes. Optional bar coloring provides instant visual context of current significant volume activity intensity and direction without switching between the price pane and indicator pane, enabling traders and investors to immediately assess volume-price positioning dynamics while analyzing price action.
Chỉ báo Pine Script®
của QuantAlgo
12
MB-MACD## Description **MB-MACD** is a custom Pine Script indicator designed to enhance momentum analysis by combining a volume-based "Main Buy Ratio" (MB) calculation with a traditional MACD oscillator. The MB Ratio estimates institutional buying pressure by apportioning volume based on the candle's range and close position, providing a unique proxy for "smart money" flow. This smoothed MB value is then used as the source for MACD computation, allowing for divergence detection between price action, the MB line, and the MACD Histogram. Key features include: - **MB Line**: A histogram-style plot showing smoothed buy/sell ratio, colored bullishly (teal) or bearishly (pink) based on direction. - **MACD Histogram**: Standard MACD applied to the MB source, with optional smoothing. - **Divergence Detection**: Identifies bullish and bearish divergences on both the MB line and MACD Histogram, with configurable filters for momentum decay and zero-line alignment. - **Visualization Options**: Display divergence lines and labels in the indicator pane or synced as an overlay on the main chart for better context. - **Alerts**: Triggers for bullish or bearish divergences to notify users of potential reversal setups. This indicator is particularly useful for swing traders and momentum followers looking to spot hidden divergences that may signal trend reversals or continuations. It emphasizes risk management by highlighting where price and momentum decouple, but remember: divergences are probabilistic signals and should be confirmed with other tools. As this is a community-shared script, I encourage users to test it thoroughly and provide feedback. If you spot any bugs, calculation errors, or improvements (e.g., edge cases with low-volume symbols or performance issues on certain timeframes), please comment below or reach out—your input helps refine it for everyone! ## User Manual ### Introduction The **MB-MACD** indicator integrates volume analysis with MACD to detect divergences in price and momentum. The core innovation is the "Main Buy Ratio" (MB), which approximates buying vs. selling volume within each bar based on its range and close position. This MB value is smoothed and fed into a MACD calculation, enabling divergence scans on both the MB line and the resulting MACD Histogram. Divergences occur when price makes higher highs/lower lows, but the oscillator (MB or Histogram) fails to confirm—often signaling potential reversals. The script offers flexible display options, filters to reduce false positives, and alerts for real-time notifications. **Important Notes:** - This is not financial advice; use it for educational purposes and backtest on your symbols/timeframes. - Works best on liquid stocks or indices with reliable volume data (e.g., daily or higher timeframes). - Performance may vary on low-volume assets or during after-hours trading. - If you encounter issues (e.g., no divergences detected or rendering errors), check your chart settings and report them in the comments for community debugging. ### Inputs Explanation The inputs are grouped for ease of configuration. Adjust them via the indicator's settings panel in TradingView. #### Core Parameters - **Show MB Line** (Default: True): Enables/disables the MB Ratio histogram plot. - **Show MACD Histogram** (Default: True): Enables/disables the MACD line and histogram plots. - **MB Smoothing (SMA)** (Default: 10, Min: 1): Length for smoothing the raw MB Ratio using a Simple Moving Average (SMA). Higher values reduce noise but may lag. - **Pivot Lookback Length** (Default: 5, Min: 2): Bars to look back/forward for detecting price pivots (highs/lows) used in divergence logic. - **Max Lines Kept** (Default: 100, Min: 10): Limits the number of divergence lines/labels to prevent chart clutter. #### Display Settings - **Show Lines (Indicator Pane)** (Default: True): Draws divergence lines on the MB line in the indicator pane. - **Show Labels (Indicator Pane)** (Default: True): Adds labels (e.g., "L" for line divergence) at divergence points in the pane. - **Show Hist Divergence Lines** (Default: True): Draws dashed lines for MACD Histogram divergences in the pane. - **Show Hist Divergence Labels** (Default: True): Adds labels (e.g., "H" for histogram divergence) in the pane. - **Sync Lines to Main Chart (Overlay)** (Default: True): Mirrors divergence lines and labels onto the main price chart for context (slightly offset for visibility). #### Filters & Tolerance - **Peak Alignment Tolerance (Bars)** (Default: 5, Min: 0): Allows flexibility in matching oscillator peaks/valleys to price pivots (e.g., within ±5 bars). - **Max Divergence Distance (Bars)** (Default: 20, Min: 5): Maximum bars between two pivots for a valid divergence; prevents detecting overly distant signals. - **Enable Momentum Decay Filter** (Default: True): For Histogram divergences, requires the current peak/valley to have a smaller absolute value than the previous (indicating convergence/decay). - **Enable Zero-Side Filter** (Default: False): Ensures both peaks/valleys in a divergence are on the same side of the zero line (e.g., both positive or both negative). #### MACD Settings - **MACD Fast Length** (Default: 12): Fast EMA length for MACD. - **MACD Slow Length** (Default: 26): Slow EMA length for MACD. - **MACD Signal Length** (Default: 9): Smoothing length for the MACD signal line. - **MACD Source Smoothing** (Default: 3, Min: 1): Additional SMA smoothing applied to the MB Ratio before MACD calculation. ### How It Works 1. **MB Ratio Calculation**: For each bar, the script computes the position of the close within the high-low range (0-1). This scales the volume into "buy" and "sell" portions, then derives a net ratio (-100% to +100%). It's smoothed via SMA for the final MB line. 2. **MACD Application**: The (optionally smoothed) raw MB is used as the MACD source, producing a MACD line, signal line, and histogram. 3. **Pivot Detection**: Uses Pine's `ta.pivothigh`/`ta.pivotlow` to find price highs/lows over the lookback period. 4. **Divergence Scanning**: - **Bearish (on Highs)**: Price makes a higher high, but MB/Hist makes a lower high. - **Bullish (on Lows)**: Price makes a lower low, but MB/Hist makes a higher low (closer to zero). - Scans nearby bars for oscillator matches and applies filters. 5. **Rendering**: Lines/labels are drawn in the indicator pane or overlaid on the chart. Colors: Teal for bullish, Pink/Maroon for bearish. 6. **Cleanup**: Automatically removes old lines/labels to stay under the max limit. ### Interpreting the Outputs - **MB Line (Columns)**: Positive (teal) indicates net buying pressure; negative (pink) shows selling. Watch for crossovers above/below zero as momentum shifts. - **MACD Histogram (Area)**: Green/teal for positive momentum; red/maroon for negative. Widening bars suggest strengthening trends; narrowing indicates weakening. - **Divergence Lines/Labels**: - Solid lines: MB line divergences (thicker, labeled "L"). - Dashed lines: Histogram divergences (thinner, labeled "H"). - Bullish: Teal lines sloping up (potential bottom reversal). - Bearish: Pink lines sloping down (potential top reversal). - **Overlay on Chart**: Lines connect price pivots (or offset slightly for Histogram). Use this to visualize how divergences align with candlesticks. - **Zero Line**: Gray horizontal line; divergences filtered by side if enabled. **Example Usage**: - On a daily stock chart, enable overlays and watch for a bullish "L" or "H" label near a price low—could signal a buy if confirmed by volume breakout. - In a downtrend, bearish divergences on highs might warn of further downside. ### Alerts - **Bullish Divergence (L or H)**: Triggers on any detected bullish divergence (MB or Histogram). - **Bearish Divergence (L or H)**: Triggers on bearish divergences. - Set up via TradingView's alert menu: Select the indicator, choose the condition, and customize the message (e.g., includes ticker). ### Troubleshooting / Known Issues - **No Divergences Shown**: Increase "Peak Alignment Tolerance" or reduce filters. Ensure pivot length suits your timeframe (shorter for intraday). - **Too Many Lines/Labels**: Lower "Max Lines Kept" or increase "Max Divergence Distance" to filter distant signals. - **Performance on Low-Volume Symbols**: MB Ratio may be unreliable; test on high-volume assets first. - **Rendering Errors**: If lines don't appear, check chart zoom or ensure "force_overlay=true" isn't conflicting with other indicators. - **NaN/Undefined Values**: Rare on live data but possible in historical backtests; report with symbol/timeframe for fixes. ### Feedback and Contributions This script is open for community improvement! If you find bugs (e.g., false positives in divergences, calculation edge cases, or UI glitches), or have suggestions (like additional filters or visualizations), please share in the comments. Your feedback helps make it better—let's debug and enhance it together!
Chỉ báo Pine Script®
của Kuokkuok0503
Twix Ninja - Supply & Demand + Kill Zones + ORB# TITLE OPTIONS 1. **Twix Ninja - Supply & Demand + Kill Zones + ORB** 2. **Twix Ninja - Smart Money Zones** 3. **Twix Ninja - Institutional Trading Suite** 4. **Twix Ninja - S/D Zones + Sessions + ORB** 5. **Twix Ninja - Complete ICT Trading System** --- ## RECOMMENDED TITLE: **Twix Ninja - Supply & Demand + Kill Zones + ORB** --- --- --- # DESCRIPTION ## 🥷 Twix Ninja - All-In-One Institutional Trading Suite A powerful **3-in-1 indicator** combining Supply/Demand zones, Kill Zone sessions, and Opening Range Breakout (ORB) analysis for professional traders. --- ## 🔥 Three Powerful Systems In One ### 1️⃣ Real-Time Supply & Demand Zones Automatically detects and draws institutional supply and demand zones with: - **Strong vs Weak zone detection** - **Retouch tracking** - See when zones are tested - **Auto-removal** of broken zones - **Touch count display** - **Zone age filtering** - Customizable sensitivity and colors ### 2️⃣ Kill Zone Sessions Highlights the most volatile trading sessions where smart money is active: - 🔵 **London Session** (2:00 - 5:00 UTC) - 🔴 **New York Session** (12:00 - 15:00 UTC) - 🟡 **Asia Session** (20:00 - 0:00 UTC) - Fully customizable times - Session high/low tracking ### 3️⃣ Opening Range Breakout (ORB) Professional ORB system for day trading: - **Auto-detects Opening Range** high, low, and mid - **Breakout signals** when price breaks ORB levels - **Target levels** - Up to 5 profit targets - **Historical ORB display** - Customizable session times and timezone --- ## ⚡ Key Features ✅ **All-in-one solution** - No need for multiple indicators ✅ **Clean visualization** - Non-cluttered chart display ✅ **Fully customizable** - Colors, times, sensitivity all adjustable ✅ **Multi-timeframe** - Works on any timeframe ✅ **Real-time updates** - Zones update as price moves ✅ **Smart filtering** - Remove weak zones automatically ✅ **Info dashboard** - Track zone statistics --- ## 📊 Dashboard Shows - Active Supply Zones (with touch count) - Active Demand Zones (with touch count) - Broken Supply/Demand count - Kill Zones ON/OFF status - ORB ON/OFF status - Current timeframe --- ## 🎯 How To Use **For Supply/Demand:** - Look for price entering green zones (demand) → BUY opportunity - Look for price entering red zones (supply) → SELL opportunity - Stronger zones = higher probability **For Kill Zones:** - Trade during highlighted sessions for best volatility - London & NY overlap = highest volume **For ORB:** - Wait for Opening Range to form - Trade breakouts above ORH (long) or below ORL (short) - Use numbered targets for take profit levels --- ## 📈 Best Markets - Forex (EUR/USD, GBP/USD, etc.) - Indices (NAS100, SPX500, etc.) - Crypto (BTC, ETH, SOL) - Any liquid market **Recommended Timeframes:** 1m, 5m, 15m, 1H --- ## ⚙️ Customization - Zone sensitivity adjustment - Weak zone filter toggle - Session times (fully editable) - ORB period and timezone - All colors customizable - Table position options --- ## ⚠️ Disclaimer This indicator is a trading tool, not financial advice. Always manage your risk properly and never trade with money you cannot afford to lose. --- ## 🔑 Access This is an **invite-only** indicator. Contact me for access details. --- **Trade Smart, Trade Like a Ninja! 🥷**
Chỉ báo Pine Script®
của BenjaminMokhtar
3D Isometric MFI (Christmas Edition) [Kodexius]3D Isometric MFI (Christmas Edition) is a visual-first interpretation of the classic Money Flow Index, rendered as a projected 3D-style ribbon using an isometric mapping. Instead of plotting a standard oscillator line, the script reconstructs recent MFI history as a depth-aware ribbon that moves from back to front, producing a layered perspective effect that helps you read momentum shifts, regime transitions, and relative strength changes as a continuous structure. This Christmas Edition was also built for fun and as a creative seasonal experiment. The goal is to keep the underlying indicator logic familiar, while presenting it in a playful, “3D showroom” style that looks great in a separate oscillator panel. The indicator is designed for presentation quality and chart readability. It uses controlled object management (lines, polylines, labels) and renders only the most recent portion of the MFI history (user-defined depth). A decorative snow background effect adds atmosphere. 🔹 Features 🎄 🔸 Isometric 3D Projection Engine The ribbon is produced by projecting 3D points (time offset, MFI value, depth) into 2D chart coordinates. - X represents bar offset into history - Y represents the MFI value - Z introduces depth and perspective Angle controls the projection direction, and Vertical Zoom scales the perceived amplitude. 🔸 Depth-Limited Ribbon Rendering (Back to Front) Only the most recent History Depth values are drawn to keep performance and readability stable. - Each segment connects two consecutive MFI values - A top edge, bottom edge, and filled face are drawn to simulate thickness - Older segments fade into the background 🔸 Dynamic Gradient Coloring + Depth Fade Ribbon color follows a value-based gradient: - Lower values lean red (risk-off pressure) - Higher values lean green (risk-on pressure) - Mid values blend naturally Transparency increases with depth so older history is less dominant but still readable. 🔸 Tip Label (Value + Candy Marker) 🍭🍬 The most recent ribbon tip displays current MFI value. A candy symbol that switches based on the 50 midpoint The label is offset so it does not cover the ribbon tip. 🔸 Projected Reference Grid (80, 50, 20) A projected grid is drawn at classic MFI reference levels to improve orientation: - 80 Overbought reference - 50 Midpoint reference - 20 Oversold reference These grid lines use the same projection math, so they stay aligned at any angle or zoom. 🔸 Seasonal Snow Background Effect ❄️ Randomized snow is rendered behind the ribbon using lightweight labels. This is purely decorative and does not alter MFI values or logic. 🔸 Object Lifecycle Management Because 3D-style drawing uses many objects, the script manages them explicitly by storing references in arrays, deleting old objects, and redrawing on the last bar. This helps prevent visual stacking artifacts and keeps the panel clean. 🔹 Calculations 1) Money Flow Index Computation The script separates “positive” and “negative” money flow based on the direction of change in the selected source, then converts their ratio into the standard 0 to 100 oscillator. Classic MFI Calculations. calc_mfi(int length, float source) => float upper = math.sum(volume * (ta.change(source) <= 0 ? 0 : source), length) float lower = math.sum(volume * (ta.change(source) >= 0 ? 0 : source), length) float mfi = 100.0 if lower != 0 float r = upper / lower mfi := 100 - (100 / (1 + r)) mfi Interpretation: upper accumulates volume-weighted source values on up moves lower accumulates volume-weighted source values on down moves if lower is zero, MFI defaults to 100 to avoid division errors otherwise, MFI is computed from the ratio transform 2) History Buffer Management The current MFI value is pushed into the front of an array every bar. The array is trimmed to History Depth so rendering stays bounded. array.unshift(ctx.history_val, mfi_curr) if ctx.history_val.size() > depth ctx.history_val.pop() 3) 3D Point Model and Ribbon Thickness Each segment is built from four projected points to form a filled face (a simple quad). A small thickness is applied to create the “ribbon” look, and depth is used to simulate perspective. 4) Isometric Projection to Chart Coordinates 3D points are mapped into chart coordinates with an angle rotation and scaling for zoom and depth. method project(Point3 p, int anchor_bar, float angle_rad, float zoom, float z_scale) => float x_world = -float(p.x) * 2.0 float z_val = p.z * z_scale float screen_x_offset = (x_world * math.cos(angle_rad)) - (z_val * 1.0) float screen_y_offset = (p.y * zoom) + (x_world * math.sin(angle_rad)) * 0.5 int final_x = anchor_bar + int(math.round(screen_x_offset)) float final_y = screen_y_offset chart.point.from_index(final_x, final_y) 5) Gradient and Depth Transparency Color is derived from MFI value via a gradient, and transparency increases with segment depth so recent data remains dominant while older context stays visible. 6) Projected Reference Grid Construction The 80, 50, 20 levels are drawn as dotted segments across the same historical span, using the same projection and depth fade logic for consistent alignment. 🎆 Wishing you a great year ahead 🎄✨ May your charts be clear, your risk be controlled, and your next year be filled with health, peace, and good trades. Happy Holidays and Happy New Year.
Chỉ báo Pine Script®
của UnknownUnicorn113699460
Participation-Weighted Orderflow Bubbles (HTF / LTF Context ToolThis indicator visualizes participation-weighted market pressure by aggregating lower-timeframe price and volume data into higher-timeframe context bubbles. It is designed to help identify directional dominance, balance, and absorption across timeframes. This is a context and bias tool, not a trade signal generator. What the indicator shows Each bubble represents a single chart bar, built from lower-timeframe candles. Total Notional Aggregated volume multiplied by price from lower-timeframe candles. Buy / Sell Proxies Lower-timeframe candles are classified based on where they close within their range: – Close near the high → buy-side proxy – Close near the low → sell-side proxy – Middle of the range → neutral Delta (USD and %) Buy proxy notional minus sell proxy notional, expressed as both absolute USD delta and percentage of total notional. Bubble colors Green Buy-side participation dominance. Sell color (user configurable) Sell-side participation dominance. The default is chosen for visibility on bearish candles and can be changed in settings. Grey Balanced participation. Indicates two-way trade, consolidation, or auction. Yellow (Absorption) High notional with limited price movement, suggesting potential absorption or distribution. Coloring uses both relative dominance (delta percentage) and absolute dominance (minimum delta in USD), which improves behavior on higher timeframes. Bubble size and visuals Bubble size scales with total notional. HD glow layers adapt automatically by timeframe. Bubbles are drawn in front of candles for clarity. Optional text displays delta and total notional. Hovering over a bubble shows detailed information including total notional, buy/sell/neutral proxies, delta values, absorption status, and the number of lower-timeframe candles used. Timeframe behavior The indicator is designed to work across multiple timeframes. On higher timeframes, more grey bubbles are expected due to natural auction and balance behavior. Colored bubbles on higher timeframes represent sustained participation rather than short-term momentum. Visual density and performance are automatically adjusted on higher timeframes. How to use it Recommended workflow: 1. Higher timeframe (1H, 4H, Daily) Use the bubbles to identify dominant buy or sell participation, balance zones, and absorption near highs or lows. 2. Lower timeframe (5m, 15m) Take trades in alignment with the most recent higher-timeframe dominance. Be cautious or range-focused inside higher-timeframe balance zones. Use structure and price action for entries. What this indicator is not This indicator does not show true bid/ask data. It does not display actual market versus limit orders. It does not replace a DOM or exchange orderflow feed. It should not be used as a standalone entry signal. The indicator works within TradingView’s available data and provides a probabilistic, participation-weighted view of market pressure rather than true tape or orderflow data. Best practices Use a 1-minute lower timeframe for best results. Avoid setting the lower timeframe too high relative to the chart timeframe. Combine this tool with structure, levels, and session context. Treat grey bubbles as information about balance, not as noise. This tool is intended for traders who want better context and bias, not more signals.
Chỉ báo Pine Script®
của shabahat_kazmi1
2
NC-ALPHA INDEX [Pro Pane] - Smart Money Flow01. THE PROBLEM: MARKET CAP IS A LAGGING INDICATOR Standard crypto indices (like Coin50 or Total Market Cap) are weighted by capitalization. This is a flawed model for active traders because it prioritizes "Dino Coins"—older assets with massive supplies but very little active volume or price discovery. They are heavy, slow, and hide the real story. 02. THE SOLUTION: VOLUME-VELOCITY WEIGHTING The NC-ALPHA INDEX is designed for SMC (Smart Money Concepts) traders who need to see where the real liquidity is flowing right now. Instead of static weighting, this script dynamically adjusts the influence of each asset based on its Real-Time Dollar Volume. High Volume = High Impact: If a specific asset (e.g., SOL, HYPE, or PEPE) is attracting massive liquidity inflow, its weight in the index increases instantly. Low Volume = Low Impact: Assets with no volume ("Zombie coins") have minimal impact on the index line, preventing false signals. 03. THE "MARKET DRIVERS" BASKET The index tracks a curated basket of 10 high-velocity assets representing the current market meta: 1 - Kings: BTC, ETH 2 - Market Leaders: SOL, BNB 3 - High Beta / L1s: SUI Sector Proxies: DOGE (Memes), HYPE (DEX/Perps), AAVE (DeFi), LINK (Infra), XRP. 04. HOW TO TRADE WITH IT A. The Divergence (Trap Detector) If Bitcoin is making a Higher High (HH) at a Key Resistance, but the NC-ALPHA Index is making a Lower High (LH) or stagnating: Signal: The pump is unsupported by broad liquidity. It is likely a "Fake Pump" driven by wash trading or isolated manipulation. High probability of an SFP (Swing Failure Pattern). B. The HUD (Heads-Up Display) The dashboard on the chart shows you exactly what is moving the market. Look at the "W%" (Weight) column. Signal: If an Altcoin (like SUI or HYPE) suddenly exceeds 15-20% weight, a Sector Rotation is occurring. Stop watching BTC and focus on that asset. 05. TECHNICAL NOTES Crash Proof: Built with advanced nz() data handling to prevent the "disappearing line" bug common in composite indices. Usage Rule: For accurate calculation, use this indicator on 24/7 Crypto Charts (BTC, ETH, SOL) rather than Traditional Finance charts (VIX, SPX) to avoid weekend data gaps. Built by KheopsCrypto for the SMC Community.
Chỉ báo Pine Script®
của KheopsCrypto
MFI Volume Profile [Kodexius]The MFI Volume Profile indicator blends a classic volume profile with the Money Flow Index so you can see not only where volume traded, but also how strong the buying or selling pressure was at those prices. Instead of showing a simple horizontal histogram of volume, this tool adds a money flow dimension and turns the profile into a price volume momentum heat map. The script scans a user controlled lookback window and builds a set of price levels between the lowest and highest price in that period. For every bar inside that window, its volume is distributed across the price levels that the bar actually touched, and that volume is combined with the bar’s MFI value. This creates a volume weighted average MFI for each price level, so every row of the profile knows both how much volume traded there and what the typical money flow condition was when that volume appeared. On the chart, the indicator plots a stack of horizontal boxes to the right of current price. The length of each box represents the relative amount of volume at that price, while the color represents the average MFI there. Levels with stronger positive money flow will lean toward warmer shades, and levels with weaker or negative money flow will lean toward cooler or more neutral shades inside the configured MFI band. Each row is also labeled in the format Volume , so you can instantly read the exact volume and money flow value at that level instead of guessing. This gives you a detailed map of where the market really cared about price, and whether that interest came with strong inflow or outflow. It can help you spot areas of accumulation, distribution, absorption, or exhaustion, and it does so in a compact visual that sits next to price without cluttering the candles themselves. Features Combined volume profile and MFI weighting The indicator builds a volume profile over a user selected lookback and enriches each price row with a volume weighted average MFI. This lets you study both participation and money flow at the same price level. Volume distributed across the bar price range For every bar in the window, volume is not assigned to a single price. Instead, it is proportionally distributed across all price rows between the bar low and bar high. This creates a smoother and more realistic profile of where trading actually happened. MFI based color gradient between 30 and 70 Each price row is colored according to its average MFI. The gradient is anchored between MFI values of 30 and 70, which covers typical oversold, neutral and overbought zones. This makes strong demand or distribution areas easier to spot visually. Configurable structure resolution and depth Main user inputs are the lookback length, the number of rows, the width of the profile in bars, and the label text size. You can quickly switch between coarse profiles for a big picture and higher resolution profiles for detailed structure. Numeric labels with volume and MFI per row Every box is labeled with the total volume at that level and the average MFI for that level, in the format Volume . This gives you exact values while still keeping the visual profile clean and compact. Calculations Money Flow Index calculation currentMfi is calculated once using ta.mfi(hlc3, mfiLen) as usual, Creation of the profileBins array The script creates an array named profileBins that will hold one VPBin element per price row. Each VPBin contains volume which is the total volume accumulated at that price row mfiProduct which is the sum of volume multiplied by MFI for that row The loop; for i = 0 to rowCount - 1 by 1 array.push(profileBins, VPBin.new(0.0, 0.0)) pre allocates a clean structure with zero values for all rows. Finding highest and lowest price across the lookback The script starts from the current bar high and low, then walks backward through the lookback window for i = 0 to lookback - 1 by 1 highestPrice := math.max(highestPrice, high ) lowestPrice := math.min(lowestPrice, low ) After this loop, highestPrice and lowestPrice define the full price range covered by the chosen lookback. Price range and step size for rows The code computes float rangePrice = highestPrice - lowestPrice rangePrice := rangePrice == 0 ? syminfo.mintick : rangePrice float step = rangePrice / rowCount rangePrice is the total height of the profile in price terms. If the range is zero, the script replaces it with the minimum tick size for the symbol. Then step is the price height of each row. This step size is used to map any price into a row index. Processing each bar in the lookback For every bar index i inside the lookback, the script checks that currentMfi is not missing. If it is valid, it reads the bar high, low, volume and MFI float barTop = high float barBottom = low float barVol = volume float barMfi = currentMfi Mapping bar prices to bin indices The bar high and low are converted into row indices using the known lowestPrice and step int indexTop = math.floor((barTop - lowestPrice) / step) int indexBottom = math.floor((barBottom - lowestPrice) / step) Then the indices are clamped into valid bounds so they stay between zero and rowCount - 1. This ensures that every bar contributes only inside the profile range Splitting bar volume across all covered bins Once the top and bottom indices are known, the script calculates how many rows the bar spans int coveredBins = indexTop - indexBottom + 1 float volPerBin = barVol / coveredBins float mfiPerBin = volPerBin * barMfi Here the total bar volume is divided equally across all rows that the bar touches. For each of those rows, the same fraction of volume and volume times MFI is used. Accumulating into each VPBin Finally, a nested loop iterates from indexBottom to indexTop and updates the corresponding VPBin for k = indexBottom to indexTop by 1 VPBin binData = array.get(profileBins, k) binData.volume := binData.volume + volPerBin binData.mfiProduct := binData.mfiProduct + mfiPerBin Over all bars in the lookback window, each row builds up total volume at that price range total volume times MFI at that price range Later, during the drawing stage, the script computes avgMfi = bin.mfiProduct / bin.volume for each row. This is the volume weighted average MFI used both for coloring the box and for the numeric MFI value shown in the label Volume .
Chỉ báo Pine Script®
của UnknownUnicorn113699460
Marumaroo's RSI + MFI (가격과 거래량의 이중 체크)매매할 때 RSI랑 MFI를 같이 보는데, 지표창 두 개 띄우기 귀찮아서 하나로 합쳤습니다. RSI(가격)만 보면 가짜 반등에 속을 때가 많은데, MFI(거래량)랑 같이 보면 다이버전스나 휩소 걸러내기가 훨씬 수월합니다. 특징: 보기 편함: RSI는 빨강, MFI는 회색입니다. 배경색 알림: 과매수(80 이상) 구간은 빨간 배경, 과매도(20 이하) 구간은 초록 배경이 뜹니다. 한눈에 파악하기 좋습니다. 복잡한 기능 다 빼고 깔끔하게 만들었으니 필요하신 분 쓰세요. I combined RSI and MFI into a single chart to save screen space and filter out fake signals. Checking Money Flow (MFI) alongside Price Action (RSI) helps in spotting divergences and avoiding traps. Features: Clean Look: RSI is Red, MFI is Gray. Background Colors: automatically highlights Overbought (>80) zones in Red and Oversold (<20) zones in Green. Simple and lightweight script. Hope it helps!
Chỉ báo Pine Script®
của xici3077
CVD Power & Whale Tracker Overview: What is it? This indicator combines Order Flow, Volume Analysis, and Momentum into a single dashboard. Instead of just looking at price, it looks at effort (Volume) versus result (Price Action) to identify when Institutions (Whales) are stepping in. 1. The Core Engine: "Pressure" (Z-Score) At the heart of the indicator is the Z-Score of Volume Delta. The Logic: It calculates the "Volume Delta" (Buying Volume minus Selling Volume) for every candle. It then compares the current candle's delta to the average of the last 20 candles. The Output: Zero Line: Buying and Selling pressure is balanced. Positive Bar (> 0): Buyers are more aggressive than usual. Negative Bar (< 0): Sellers are more aggressive than usual. Extreme Values (> 2 or < -2): This represents statistically significant aggression (2 Standard Deviations from the mean). This usually marks the start of a breakout or a climax. 2. Whale Detection (Institutional Activity) Retail traders trade small size; Institutions (Whales) trade large size. The Logic: The script calculates the average volume of the last 50 bars. If the current bar's volume is 2.5x higher than that average, it flags it as a "Whale" bar. Visual: The Histogram bar turns Yellow. Meaning: Smart money is active. Pay attention to the direction of the next few candles. 3. Absorption (The "Smart Money" Signal) This is the most powerful signal in the script. It detects when one side is trapping the other. Bullish Absorption (Cyan Dot): Condition: Huge Volume (Whale) + Net Selling Pressure (Red Delta) + Price refuses to drop (closes in the upper half). Meaning: Sellers are dumping hard, but a passive buyer (Limit Order) is "absorbing" all the sell orders. This is essentially a hidden support wall. Bearish Absorption (Orange Dot): Condition: Huge Volume (Whale) + Net Buying Pressure (Green Delta) + Price refuses to rise (closes in the lower half). Meaning: Buyers are pushing hard, but a passive seller is absorbing the buy orders. This is a hidden resistance wall. 4. Money Flow (Accumulation/Distribution) Although the purple line was removed from the chart to keep it clean, the math still runs in the background for the Dashboard. The Logic: It uses the standard Accumulation/Distribution (A/D) formula. It checks if money is flowing into the asset (Close near High) or out (Close near Low) relative to volume. Dashboard: If the trend of Money Flow is up, the table says "Accumulation (In)". If down, "Distribution (Out)". 5. CVD Trend (Blue/Orange Line) What is CVD? Cumulative Volume Delta. It keeps a running total of buying vs. selling volume over time. Usage: Blue: Positive Slope (Buying Trend). Orange: Negative Slope (Selling Trend). Divergence: If Price is making a Lower Low but the CVD Line is making a Higher Low, it means sellers are exhausted (Bullish Divergence). The script highlights the background in Green when this happens.
Chỉ báo Pine Script®
của PaydaySOL
NAMI Lite │ Zero-Repaint Momentum Wave + Reg Divergences (FREE) NAMI Lite │ 100% Zero-Repaint Momentum Wave + Divergences (FREE) The only zero-repaint, zero-lag momentum indicator that calls reversals hours early — even the free version beats all paid indicators. No repainting on closed bars • Instant wave flips • Clean regular divergences • Money Flow confluence Zero-Repaint Momentum Wave – CCI-based oscillator with real-time color flips (no lag, no lies) Regular Bull/Bear Divergences – Faded lines on confirmed pivots only Money Flow Oscillator – Volume-weighted filled areas for extra confirmation This Lite version is intentionally limited — powerful enough to replace monthly subscriptions, but missing the pro features that make trading effortless. Upgrade to Full NAMI Suite (One-Time Payment – Cancel Recurring Fees Forever): Hidden Divergences with Divergence LABELS (catch 70% more massive moves) 200-Color Stochastic Heat Ribbon (gorgeous visual heatmaps) True VWAP Oscillator + multi-source options Buy/Sell Dots + Full Alerts (divergence, money flow, wave flips) Full and Complete Customization (themes, lengths, colors) Plus our other toolkits: TRAVIS, SMC Pro, and all future tools free SEE IMAGE FOR COMPLETE NAMI VIEW Over 800 traders already switched and saved thousands.
Chỉ báo Pine Script®
của Nami_Trading
2
Twiggs Go Money Flow Enhanced [KingThies]█ OVERVIEW The Twiggs Money Flow (TMF) is a volume-weighted momentum oscillator that measures buying and sellistng pressure by analyzing where price closes within each bar's true range. It's an enhanced version of Chaikin Money Flow that uses Wilder's smoothing method, providing better trend persistence and smoother signals. The indicator oscillates around a zero listne: Values above zero indicate accumulation (buying pressure) Values below zero indicate distribution (sellistng pressure) TMF was developed by Colistn Twiggs as an improvement over traditional money flow indicators by incorporating true range calculations and Wilder's exponential moving average. █ CONCEPTS True Range Boundaries TMF calculates a modified true range for each bar by comparing the current bar's high and low with the previous close: True Range High = maximum of (previous close, current high) True Range Low = minimum of (previous close, current low) This accounts for overnight gaps and ensures price continuity between bars. Average Daily Value (ADV) The ADV represents the portion of volume attributable to buying versus sellistng: ADV = Volume × ((Close - TR Low) - (TR High - Close)) / True Range When price closes near the high of the true range, ADV is positive and large. When price closes near the low, ADV is negative and large. A close in the middle produces values near zero. Wilder's Moving Average Unlistke simple moving averages, Wilder's smoothing method gives more weight to recent values while maintaining memory of historical data: WMA = (Previous WMA × (Period - 1) + Current Value) / Period This creates smoother trends that are less prone to whipsaws than standard moving averages. Final Calculation TMF = Wilder's MA(ADV, Period) / Wilder's MA(Volume, Period) By dividing smoothed ADV by smoothed volume, TMF normalistzes the reading and makes it comparable across different securities and timeframes. █ HOW TO USE Zero listne Crossovers The most straightforward trading signals: A cross above zero suggests buyers are gaining control. Consider this a bullistsh signal, especially when confirmed by price action. A cross below zero suggests sellers are gaining control. Consider this a bearish signal. The longer TMF remains above or below zero, the stronger the trend. Extreme Values Strong positive or negative readings indicate intense buying or sellistng pressure: Sustained high positive values (above +0.4) suggest strong accumulation but may also indicate overbought conditions. Sustained low negative values (below -0.4) suggest strong distribution but may also indicate oversold conditions. These extremes work best when used in conjunction with price levels and support/resistance zones. Divergences Divergences between price and TMF often signal potential reversals: Bearish divergence: Price makes a higher high but TMF makes a lower high — suggests buying pressure is weakening despite rising prices. Bullistsh divergence: Price makes a lower low but TMF makes a higher low — suggests sellistng pressure is weakening despite fallistng prices. Trend Confirmation Use TMF to confirm the strength of existing trends: In an uptrend, TMF should remain mostly positive with occasional dips below zero. In a downtrend, TMF should remain mostly negative with occasional rises above zero. If TMF contradicts the price trend, consider the trend weak or potentially ending. █ FEATURES Period (default: 21) The lookback length for Wilder's moving average calculation: Shorter periods (10–15) make TMF more responsive to recent changes but increase noise and false signals. Longer periods (30–50) create smoother readings but lag price action more significantly. The default 21-period setting balances responsiveness with relistabilistty. Consider adjusting the period based on your trading timeframe and the volatilistty of the security you're analyzing. █ LIMITATIONS TMF is a lagging indicator due to its smoothing method. Signals may occur after optimal entry or exit points. In low-volume or illistquid markets, TMF can produce erratic readings that may not reflect true buying or sellistng pressure. Ranging or choppy markets often generate frequent zero-listne crosses that can lead to whipsaws. listke all volume-based indicators, TMF's relistabilistty depends on accurate volume data. For securities with unrelistable volume reporting, consider using price-based momentum indicators instead. █ NOTES This indicator uses area-style plotting in the original version to visualistze the magnitude of buying and sellistng pressure. The filled area makes it easy to see at a glance whether the market is in accumulation or distribution mode. TMF works on any timeframe but tends to be most relistable on daily charts where volume data is most accurate and meaningful. █ CREDITS Original indicator developed by LazyBear . Based on the Twiggs Money Flow concept from Incredible Charts: Incredible Charts – Twiggs Money Flow .
Chỉ báo Pine Script®
của kingthies
Delta Money Flow IndexThe Delta Money Flow Index is a modified version of the traditional Money Flow Index that uses directional volume instead of total volume to measure buying and selling pressure in a different way. It helps traders identify overbought/oversold conditions based on actual buy/sell pressure rather than just total volume. It's designed for traders who want to see if price movements are backed by genuine buying or selling activity. How to use it: - Values above 80 indicate overbought conditions - Values below 20 indicate oversold conditions - The 50 level acts as a neutral zone. Above suggests buyers are in control, below suggests sellers are in control. - Traders can check for divergences for potential reversal signals - Works best on intraday timeframes where delta volume is most meaningful What makes it different: Unlike the standard MFI which uses total volume, the Delta MFI calculates an approximation of volume delta by assigning positive volume to up-closing candles and negative volume to down-closing candles. This means: - It focuses on directional pressure, not just activity - Filters out low-conviction volume that doesn't move price - Provides clearer signals when actual buying/selling dominates The indicator includes visual aids like background colors for overbought/oversold and a fill showing whether the Delta MFI is above or below the 50 midpoint for quick interpretation.
Chỉ báo Pine Script®
của VEGAlgo
1
Flow Control Oscillator (FCO)Flow Control Oscillator (FCO) The Flow Control Oscillator (FCO) is a momentum-based indicator that combines volume analysis and money flow to determine who is in control of the market—buyers or sellers—and how strong that control is. Unlike pure price-based oscillators, FCO integrates both price action and volume distribution to provide a more complete picture of market dynamics. How It Works Core Components: Money Flow Index (MFI) - Scaled to -1 to +1 range Measures the flow of money into and out of an asset Identifies buying and selling pressure based on price and volume Chaikin Money Flow (CMF) - Already in -1 to +1 range Measures the accumulation/distribution of volume Shows whether volume is accumulating (buying) or distributing (selling) Combined Flow Control Line (FCO Line) - Equal-weighted composite of MFI and CMF Smoothed with SMA (default: 3 periods) Values above 0 = Buyers in control Values below 0 = Sellers in control Signal Line - WMA of the FCO line (default: 6 periods) Used for timing entries and confirming momentum shifts Momentum Histogram- Shows the rate of change in buyer/seller control Weighted by ADX (Average Directional Index) when enabled Larger bars = stronger momentum ADX weighting filters out choppy, unreliable signals Key Zones Neutral Zone (-0.3 to +0.3): Balanced market, low conviction Healthy Trend Zone (±0.3 to ±0.7): Clear control without exhaustion Warning Zone (±0.7 to ±1.0): Extended, approaching exhaustion Extreme Zone (beyond ±1.0): Overbought/oversold, reversal likely What To Look For Reversal Setups: FCO in extreme zone (beyond ±1.0) FCO crosses Signal line in opposite direction Momentum histogram shrinking (weakening pressure) Interpretation: Buyers or sellers are exhausted and losing control Trend Strength Setups: FCO crosses zero line (control shift) Momentum histogram growing in the same direction ADX confirms strong trend (no orange background) Signal line moving in same direction as FCO Interpretation: New control being established with building momentum Divergences: Price makes new high/low but FCO doesn't confirm Indicates weakening momentum despite price movement Early warning of potential reversal Choppy Market Warning: Orange background (ADX < 20) Small momentum bars regardless of FCO position Interpretation: Weak trend, avoid trading or use tight stops Best Practices: Use with context: Combine with support/resistance levels (like VWAP) for confluence Multi-timeframe confirmation: Check higher timeframe FCO for overall bias Wait for confirmation: Let signals develop rather than predicting turns Respect extreme zones: Best reversal opportunities occur when FCO is beyond ±1.0 Filter with ADX: Pay attention to background coloring—avoid choppy conditions The indicator includes comprehensive alert conditions for: Reversal setups (extreme + cross + weakening momentum) Trend strength signals (zero cross + growing momentum + strong ADX) FCO/Signal crossovers Extreme overbought/oversold conditions Control shifts (buyers/sellers taking control)
Chỉ báo Pine Script®
của WalrusQuant
3