Bắt đầu

Supertrend

Ultimate IndicatorThis is a combination of all the price chart indicators I frequently switch between. It contains my day time highlighter (for day trading), multi-timeframe long-term trend indicator for current commodity in the bottom right, customizable trend EMA which also has multi-timeframe drawing capabilities, VWAP, customizable indicators with separate settings from the trend indicator including: EMA, HL2 over time, Donchian Channels, Keltner Channels, Bollinger Bands, and Super Trend. The settings for these are right below the trend settings and can have their length and multiplier adjusted. All of those also have multi-timeframe capabilities separate from the trend multi-time settings. The Day Trade Highlight option will draw faint yellow between 9:15-9:25, red between 9:25-9:45, yellow between 9:45-10:05. There will be one white background at 9:30am to show the opening of the market. while the market is open there will be a very faint blue background. For the end of the day there will be yellow between 15:45-15:50, red between 15:50-16:00, and yellow between 16:00-16:05. During the night hours, there is no coloring. The purpose of this highlight is to show the opening / closing times of the market and the hot times for large moves. The indicators can also be colored in the following ways: 1. Simple = Makes all colors for the indicator Gray 2. Trend = Will use the Donchian Channels to get the short-trend direction and by default will color the short-term direction as Blue or Red. Unless using Super Trend, the Donchian Channel is used to find short-term trend direction. 3. Trend Adv = Will use the Donchian Channels to get the short-trend direction and by default will color the short-term direction as Blue or Red. Unless using Super Trend, the Donchian Channel is used to find short-term trend direction. If there is a short-term up-trend during a long-term down-trend, the Blue will become Navy. If short-term down-trend during long-term up-trend, the Red will be Brown. 4. Squeeze = Compares the Bollinger Bands width to the Keltner Channels width and will color based on relative squeeze of the market: Teal = no squeeze. Yellow = little squeeze. Red = decent squeeze. White = huge squeeze. if you do not understand this one, try drawing the Bollinger Bands while using the Squeeze color option and it should become more apparent how this works. I also recommend leaving the length and multiplier to the default 20 and 2 if using this setting and only changing the timeframe to get longer/shorter lengths as I've seen that changing the length or multiplier can more or less make it not work at all. Along with the indicator settings are options to draw lines/labels/fills for the indicator. I enjoy having only fills for a cleaner look. The Labels option will show Buy/Sell signals when the short-term trend flips to agree with the long-term trend. The Trend Bars option will do the same as the Labels option but instead will color the bars white when a Buy/Sell option is given. The Range Bars option shows will color a bar white when the Close of a candle is outside of a respective ranging indicator option (Bollinger or Keltner). The Trend Bars will draw white candles no matter which indicator selection you make (even "Off"). However, Range Bars will only draw white when either Bollinger or Keltner are selected. The Donchian Channels and Super Trend are trending indicators and should be used during trending markets. I like to use the MACD in conjunction with these indicators for possibly earlier entries. The Bollinger Bands and Keltner Channel are ranging indicators and should be used during ranging markets. I like to use the RSI in conjunction with these indicators and will use 60/40 for overbought and oversold areas rather than 70/30. During a range, I wait for an overbought or oversold indication and will buy/sell when it crosses back into the middle area and close my position when it touches the opposite band. I have a MACD/RSI combination indicator if you'd like that as well :D As always, trade at your own risk. This is not some secret indicator that will 100% win. As always, the trades you see in the picture use a 1:1.5 or 1:2 risk to reward ratio, for today (August 8, 2022) it won 5/6 times with one trade still open at the end of the day. Manage your account correctly and you'll win in the long term. Hit me up with any questions or suggestions. Happy Trading!
Chỉ báo Pine Script™
bởi theehoganator
11
DEMA Supertrend Bands [Misu]█ Indicator based on DEMA (Double Exponential Moving Average) & Supertrend to show Bands . DEMA attempts to remove the inherent lag associated with Moving Averages by placing more weight on recent values. Supertrend aims to detect price trends, it's also used to set protective stops. █ Usages: Combining Dema to calculate Supertrend results in nice lower and upper bands. This can be used to identify potential supports and resistances and set protective stops. █ Parameters: Length DEMA: Double Ema lenght used to calculate DEMA. Dema is used by Supertrend indicator. Length Atr: Atr lenght used to calculate Atr. Atr is used by Supertrend indicator. Band Mult: Used to calculate Supertrend Bands width. █ Other Applications: The mid band can be used to filter bad signals in the manner of a more classical Moving Average.
Chỉ báo Pine Script™
bởi Fontiramisu
SR Relative StrengthThis is a relative strength model for Indian Stock Markets where in the price of the stock in the current scenario is compared with the benchmark indices ( NIFTY / BANKNIFTY) over a period of 55 days ( by default). This indicator also has RSI and Supertrend built-in by default. Hence this indicator can be used in place of 3 indicators. How to use? 1. When the background is blue, it means that the stock is relatively strong as compared to the bench mark indices over a period of 55 days and the RSI is > 50 When both RS > 0 & RSI > 50 the background will be blue. If either or is true it won't turn blue. 2. Superternd by default setting is 10,3 which can be changed as per one's requirement. Thanks!!
Chỉ báo Pine Script™
bởi sauravraj3sinha
12
Adaptive Supertrend w/ Floating Levels [Loxx]Adaptive Supertrend w/ Floating Levels is a Supertrend indicator made adaptive by comparing the coefficient of determination / average of the least squares. The basic concept is this: use correlation with an r-squared line to adapt the period of the indicator, thereby resulting in a more versatile Supertrend. This adaptive formula makes the Supertrend more reactive to small fluctuation in the market while still doing what it's supposed to do: track trend. In addition, floating levels are drawn above or below the Supertrend which are calculated with percentage of the highest and lowest values of the Supertrend within the last “lookback” period. These floating levels act as filter to detect / prevent false trend reversals. T What is the Supertrend? Supertrend indicator was created by Olivier Seban to work on different time frames. It works for futures, forex, and equities. It is used in 15 minutes, hourly, weekly, and daily charts. Based on the parameters of multiplier and period, the indicator normally uses 3 for multiplier and 7 for the ATR period as default values. Average True Range is represented by the number of days while the multiplier is the value by which the range is multiplied. Included -Toggle on/off bar coloring -Toggle on/off adaptivity -Toggle on/off fill coloring
Chỉ báo Pine Script™
bởi loxx
6
Auto Adjust SuperTrend Indicator SuperTrend It is a standard ATR (Average True Range)-based Trailing Indicator. The indicator takes two default values ATR Period and Factor. The standard settings for Super Trend I have seen are 10,3 or 10,2. These settings will not work for all the instruments, and we end up manually changing these settings. This is where Auto-Adjust Supertrend adds value. Auto-Adjust SuperTrend finds the optimized settings for ATRPeriod and Multiple using a defined algorithm to check all the different ATR Periods and Factors. It backtests different combinations of ATR Period and Factors and Indicator switches to these profitable settings as soon as it detects most profitable setting among given range in the settings. Default ATR Period : 10 to 20 Default Factor : 2 to 5 The above settings can be altered in the indicator settings. Please do keep in mind that the performance of the indicator reduces as we increase the default settings range. Alerts are available as well Pls contact me for access.
Chỉ báo Pine Script™
bởi vickyprudhvi
14
SuperTrend Trapping Candle StrategyHello traders! How this indicator works? The main functionality of this indicator is to find entry based upon SuperTrend indicator. This indicator helps us to find trapping candle to enter into the market. What is a trapping candle? A trapping candle is a candle that shows strength in opposite direction to SuperTrend. This helps us to enter in a trade before the move start in the current trend's direction. There are two types of trapping candles signals I have added currently: 1. Volume is high than previous candle in the opposite direction. 2. 3 candles of opposite direction with decreasing volume . How to enter in a trade in uptrend market? SuperTrend shows a green signal A green triangle formed below red candle Enter into the trade when price is above red candle high SL could be place below red candle or swing low if it is near How to enter in a trade in downtrend market? SuperTrend shows a red signal A red triangle formed above green candle Enter into the trade when price is below green candle low SL could be place above green candle high or swing high if it is near How to avoid to enter in a trade in sideways market? You can follow price action strategies Or you can follow some indicator to find sideways market Indicator settings and how to change? ATR Length - For SuperTrend, this is default value. Factor - For SuperTrend, changed to 2 to provide fast signals. Candle Height - For trapping candle price, default set to 0.003% of the current price.
Chiến lược Pine Script™
bởi thehemantkaushik
2
COSMO TREND👉 What is this indicator ? This indicator is made up with the help of Multiple SuperTrend and Price Action , In this awesome indicator, The buy and sell entry is taken by comparing the trend using our secret logic. 👉 What is special about this indicator ? More than Ten Takeprofit price points can be seen in this indicator , The Stoploss price point can be seen as well . You can simply adjust take profit percentage and stop loss percentage in indicator settings 👉 What kind of Take Profit signal is there on this indicator ? Ten types of take profit signals are displayed on this indicator, each marked as TP1,TP2,TP3,TP4,TP5,TP6,TP7,TP8,TP9 and TP10 respectively. The take profit signals available for both buy and sell entries. The take profit of the buy entry is shown in Green Color and the take profit of the sell entry is shown in Red Color. 👉 What kind of Exit signal is there on this indicator ? Exit signals can be seen at the end of the trend 👉 How many alarms does this indicator have ? This indicator has 13 types of alarm for Buy , Sell , Take Profit and Exit signal, and it is best to set the alarm by selecting the Alert Once Bar Close option to avoid repaint. 👉 On which coins can this indicator be used ? This indicator is best used on all cryptocurrencies, forex markets and stocks , This indicator is very helpful to get high returns on all cryptocurrencies with low price and high voltality Note : This indicator only works well in all time frames ( 1s,5s,10s,1m,5m,1h etc...) , Use appropriate values ​​when using other coins. If you have difficulty finding the value, you can contact us. Default Setup Instructions 👇 Time Frame : 1 Minute Default Coin : C98USDT The following settings can be found in this indicator You can simply adjust take profit percentage and stoploss percentage in indicator settings Orgin Factor : This is the ATR Factor Value for High Time Frame trend. You can change this value according to the volatility , the ATR Factor value is also used to reduce the chance of a fake signal Mid Factor : This is the ATR Factor Value for Low Time Frame trend. You can change this value according to the volatility , the ATR Factor value is also used to reduce the chance of a fake signal Low Factor : This is the ATR Factor Value for Second Low Time Frame trend. Take Profit - TP1 Percentage : Give What percentage for take First TP Take Profit - TP2 Percentage : Give What percentage for take Second TP Take Profit - TP3 Percentage : Give What percentage for take Third TP Take Profit - TP4 Percentage : Give What percentage for take Fourth TP Take Profit - TP4 Percentage : Give What percentage for take Fifth TP Take Profit - TP4 Percentage : Give What percentage for take Sixth TP Take Profit - TP4 Percentage : Give What percentage for take Seventh TP Take Profit - TP4 Percentage : Give What percentage for take Eighth TP Take Profit - TP4 Percentage : Give What percentage for take Nineth TP Take Profit - TP4 Percentage : Give What percentage for take Tenth TP
Chỉ báo Pine Script™
bởi traderssignalofficial
2
Alien Brain👉 What is this indicator ? This indicator is made up with the help of Multi Trend , Moving Average and Price Action , In this beautiful indicator, The buy and sell entry is taken by comparing the trend in the higher time frame with the Trend in the short time frame using our secret logic. 👉 What kind of Buy and Sell signal is there on this indicator ? Four types of buy and sell signals are displayed on this indicator, each marked as M.Buy(Master Buy) , M.Sell (Master Sell) , Buy1, Sell1, Buy2 , Sell2, Buy3 and Sell3 respectively. These four types of indications are obtained by comparing the trend in the higher time frame with the Trend in the short time frame. 👉 What kind of Take Profit signal is there on this indicator ? Four types of take profit signals are displayed on this indicator, each marked as TP1,TP2,TP3 and TP4 respectively. The take profit signals available for both buy and sell entries. The take profit of the buy entry is shown in Green Color and the take profit of the sell entry is shown in Red Color. Note : Take Profit Signals Only Available for Master Buy and Master Sell 👉 What kind of Exit signal is there on this indicator ? Exit signals can be seen at the end of the trend Note : Exit Signals Only Available for Master Buy and Master Sell 👉 How many alarms does this indicator have ? This indicator has 18 types of alarm for Buy , Sell , Take Profit and Exit signal, and it is best to set the alarm by selecting the Alert Once Bar Close option to avoid repaint. 👉 On which coins can this indicator be used ? This indicator is best used on all cryptocurrencies, forex markets and stocks , This indicator is very helpful to get high returns on all cryptocurrencies with low price and high voltality Note : This indicator only works well in 1 min time frame , Use appropriate values ​​when using other coins. If you have difficulty finding the value, you can contact us. Default Setup Instructions 👇 Time Frame : 1 Minute Default Coin : OGNUSDT The following settings can be found in this indicator TOP BRAIN - Factor : This is the ATR Factor Value for High Time Frame trend. You can change this value according to the volatility, the ATR Factor value is also used to reduce the chance of a fake signal MID BRAIN - Factor : This is the ATR Factor Value for Low Time Frame trend. You can change this value according to the volatility, the ATR Factor value is also used to reduce the chance of a fake signal MID BRAIN - Threshold : This is the difference between price and moving average. Changing the value of this option will change the accuracy of the trading signal LOW BRAIN - Factor : This is the ATR Factor Value for Second Low Time Frame trend. Take Profit - TP1 Percentage : Give What percentage for take First TP of Master Signal Take Profit - TP2 Percentage : Give What percentage for take Second TP of Master Signal Take Profit - TP3 Percentage : Give What percentage for take Third TP of Master Signal Take Profit - TP4 Percentage : Give What percentage for take Fourth TP of Master Signal
Chỉ báo Pine Script™
bởi traderssignalofficial
9
Short Volume Weighted Trend Band VTrendThe Short Volume Weighted Trend band, combined with the custom supertrend and barcolor, which changes according to price going above or below the bollinger band basis line. Is designed for you to identify the high time frame trend, and take short to long term entries. The short volume band in green, acts as dynamic support and resistance, and price respects this quite well. I find it great for taking entries off and placing stops below or above depending on the position being taken. It really helps identify when price is actually changing trend. The barcolor change assists in acting as confluence for this. Included is a custom supertrend, which is better at 1h timeframe an above. And daily open levels only, as i find the daily key to take trades off when i am scalping on an intraday basis. The reversal calculations are based off candle close types, these are 'R' either in black or red. The difference in black and red is a type only, and means no significance between the two. Timeframes I like using on this script, 2H, 1H, 30min, 25min, 15min
Chỉ báo Pine Script™
bởi vtrend-script
Divergence + EMAS' + VolumeHi, This strategy takes in consideration multiple factors: includes RSI divergence, plus cross of EMAs and volume STRATEGY: you can change the EMAs input best use for daily charts BUY: ALERT: WHEN RSI divergence ABOVE 0 AND EMA 5 CROSS-OVER EMA 12 AND THE CANDLE NEED TO CLOSE ABOVE BOTH MOVING AVERAGE And THE VOLUME BAR NEED TO BE HIGHER THAN THE PREVIOUS ONE Then a buy signal will appear SELL ALERT: WHEN RSI divergence BELOW 0 AND MA 5 CROSS-UNDER EMA 12 AND THE CANDLE NEED TO CLOSE below BOTH MOVING AVERAGE THE VOLUME BAR NEED TO BE HIGHER THAN THE PREVIOUS ONE Then a sell signal will appear Ema 200 FILTER. ::: When this box is activated, all trades under the EMA 200 will not appear on the chart,, when deactivated, trades will appear. On the chart. that way u prevent wrong trades. obviously u will need to use support and resistance to find re entry point or the lowest point when under the 200 EMA. No strategy is perfect but this one get close to it. VOLUME: the volume box is turn off , only to display or not display in the chart, but is considered on the math within the strategy so by turning off you are only turning off the visual part any questions feel free to ask, thanks!
Chỉ báo Pine Script™
bởi mhpr1991
Ultimate Custom ScreenerThis indicator will allow you to make your custom TradingView screener without coding. Add it to the chart, select up to 40 symbols and five indicators, and the screener will do the rest for you. The indicator will form a lovely table with all values and highlighted signals. The screener is highly customizable, and you can choose its position on the chart, sorting, order of the columns, colors for the tables, and all signals separately. You can easily change parameters for all supported indicators and their signals. Currently, there are 19 different custom indicators available. Current list of indicators: Average Directional Index (ADX) - displaying the value of ADX and checking if it's higher than the threshold Average True Range (ATR) - showing the value of ATR Awesome Oscillator (AO) - displaying the value of AO and highlighting positive/negative values. Bollinger Bands (BB) - showing if the price is above/below/in the channel. Breakout Pivots - Displaying when the price is below/above the most recent pivot low/high. Commodity Channel Index (CCI) - shows the last CCI value and highlights overbought/oversold values. Directional Movement Index (DMI) - Up/Down signal (​+DI above or below ​-DI) Donchian Channel (DC) - showing if the price is above/below/in the channel. Historical Volatility (HV) - Current value of Historical Volatility Keltner Channel (KC) - showing if the price is above/below/in the channel. Moving Average Convergence Divergence (MACD) - Up/Down signal (MACD above / below signal) Moving Average Crossover (MA Cross) - Displaying MA crosses signals (SMA, EMA, WMA, HMA, VWMA, SMMA, DEMA, VWAP supported) Moving Average Distance (MA DIST) - Displaying distance to the MA (SMA, EMA, WMA, HMA, VWMA, SMMA, DEMA, VWAP supported) Price - Displaying the last price for the instrument Relative Strength Index (RSI) - Displaying the last RSI value and highlighting overbought/oversold values. Stochastic (STOCH) - Displaying the last Stochastic value and highlighting overbought/oversold values. Stochastic RSI (STOCH RSI) - Displaying the last Stochastic RSI value and highlighting overbought/oversold values. SuperTrend - Current state of the SuperTrend. True Strength Index (TSI) - Displaying the last TSI value and highlighting overbought/oversold values. We're already working on adding a few more supported indicators. If you have any ideas about the indicators you want to see in our screener, contact us, and we'll consider them. Disclaimer Please remember that past performance may not be indicative of future results. Due to various factors, including changing market conditions, the strategy may no longer perform as well as in historical backtesting. This post and the script don’t provide any financial advice.
Chỉ báo Pine Script™
bởi QuantNomad
58
Supertrend Channels [LuxAlgo]The Supertrend is one of the most used indicators by traders when it comes to determining whether the market is up-trending or down-trending. This indicator is displayed as a trailing stop, showing a lower monotonic extremity during up-trends and an upper monotonic extremity during down-trends. Today we propose a channel indicator based on the Supertrend trailing stop using trailing maximas/minimas. Settings Length: Atr length used by the Supertrend indicator. Mult: Multiplicative factor for the Atr used by the Supertrend indicator. Usage The ability of the indicator to show an up-trend or down-trend is the same as the Supertrend, with rising channels when an up-trend is detected by the Supertrend and declining channels when a down-trend is detected by the Supertrend. The look of the channels can remind of the Donchian channels indicator, and as such a similar usage can be appropriate. The extremities can for example be used as supports and resistances. Additionally, the channel's average can be used to filter out noisy variations in the price while keeping a good distance from the price.
Chỉ báo Pine Script™
bởi LuxAlgo
25
[Fedra Algotrading Super Duper Trend Filter]All-in-one trend filter Trend-following strategies are relatively easy to achieve, especially in backtesting. If only we knew what trend we were in! Let me help you: - MAs crossovers - Selection of the type of MAs - Selection of MAs periods -Super trend (optional) -Trend zones based on trend lines (optional) - Secret sauce How to use it? Do not open Longs if it is red Don't open Shorts if it's green. Apply it to your strategies and check the impact of a reliable trend filter before opening your entries.
Chỉ báo Pine Script™
bởi Fedra_Algotrading
1