Bắt đầu

Băng tần và kênh

Sniper ZonesThe indicator evaluates the relationship between price expansion and compression within daily ranges. Based on these dynamics, it derives upper and lower threshold zones that often behave as supply or demand areas. These thresholds act as “reaction pockets” where price has a tendency to slow, reverse, or accelerate depending on how it interacts with the levels. No future data or repainting methods are used; the zones come from completed timeframe evaluations and remain fixed once established for that particular trading session 📌 How Traders Can Use It Reversal Trading: When price approaches a marked zone, traders can monitor for rejection signals or momentum fade. Breakout & Continuation: If a zone is broken with strength, it often suggests continuation in that direction. The broken zone can then act as a flip level. Risk Management: Zones may serve as potential stop-loss areas or context for target placement. Bias Confirmation: Zones help traders decide whether market structure is leaning toward exhaustion or expansion. 📌 What Makes This Indicator Valuable While many supply/demand tools rely on pattern detection or candle shapes, this indicator uses a structured, rule-based approach grounded in range evaluation and volatility footprinting. The zones are clean, stable, and designed for professional reaction-based trading rather than subjective drawing. This works best of Indices which are Nifty, Banknifty, Finnifty and also works for Indian Stocks. This is for Intraday and Scalpers.
Chỉ báo Pine Script®
của Tradesmetrix
MSB (MM+SP2L+BTB) V6_by_shahriar📝 MSB(MM + SP2L + BTB) V6_by_shahriar This indicator is the improved and professional version of the earlier Combo V16. The logic has been streamlined by removing less critical patterns and focusing exclusively on the three most powerful strategies—Micro Map (MM), Spike to 2nd Leg (SP2L), and Back To Break Even (Pro BTB). These three form a "strong triangle" of high-probability entries, all strictly filtered by a long-term Simple Moving Average (SMA) to ensure trades align with the prevailing market trend. 💡 Strategy Logic Overview This strategy generates a Buy or Sell signal only when the signal condition is met and the price is on the correct side of the Trend SMA (default 200). 1. Micro Map (MM): The Catalyst for Strong Profit Moves The Micro Map strategy is the critical final piece of the Strong Triangle, acting as the precise trigger that signals the end of consolidation and the start of a powerful, high-momentum profit move in the direction of the trend. While SP2L identifies the momentum start and BTB identifies the retest of value, MM identifies the moment price is ready to explode. Logic: This strategy focuses on identifying a tightly controlled consolidation or pullback (indicated by patterns like Lower Highs or Higher Lows over the MM Correction Bars period) that occurs within the major trend (above/below the Trend SMA). Trigger: The signal fires when price decisively breaks out of this compressed area (using the MM Breakout Lookback high/low), indicating that the short-term resistance/support has collapsed and the larger trend momentum is taking over. Profit Potential: Because this entry follows a period of energy buildup (consolidation), the MM signal is often the precursor to the strongest leg of the move, offering the highest potential for profit capture. 2. Spike to 2nd Leg (SP2L) The SP2L strategy capitalizes on the market's tendency to continue movement after an initial strong impulse. Trigger: It first detects a strong impulse move (Spike) based on the Min Bars in Spike and Min Spike Move % inputs. The entry is then triggered upon the breakout of the first corrective bar (pullback) that follows that initial Spike, confirming the continuation of the trend. 3. Back To Break Even (Pro BTB) The Pro BTB strategy identifies high-probability entries near previous support/resistance levels that have been broken and then retested (a "Breaker" structure). Trigger: It first detects a breakout of a high/low level defined by the Donchian Channel Length. The signal is generated when the price returns to touch the exact breakout level and then confirms the original trend direction with a closing candle (e.g., a bullish close on a retest of a broken resistance). ⚙️ Settings and Customization (Inputs Tab) The indicator's parameters are fully customizable to adjust sensitivity and adapt to different markets and timeframes. Setting Name,Category,Description SMA Length (Trend Filter),General,Defines the period for the Simple Moving Average (SMA) used to determine the primary trend direction. (Default: 200) Donchian Channel Length,General,"Determines the lookback period for the Donchian Channel, used to establish significant high/low levels for the Pro BTB strategy. (Default: 20)" ATR Multiplier for Micro Map/BTB SL,General,A multiplier for the Average True Range (ATR) that can be used for calculating Stop Loss (SL) distance outside of the indicator's core logic. ATR Multiplier for SP2L SL (Wider),General,"A wider ATR multiplier, often used for setting Stop Loss in the higher volatility SP2L strategy." Min Bars in Spike,Spike Params,Minimum number of bars used to calculate the price change for detecting an initial Spike in the SP2L strategy. Min Spike Move %,Spike Params,Minimum percentage price change required over the Min Bars in Spike to qualify as a strong Spike. MM Correction Bars,Micro Map Params,Sets the number of bars to analyze for the Lower Highs/Higher Lows pattern that confirms consolidation/pullback in the MM strategy. MM Breakout Lookback,Micro Map Params,Sets the lookback period for the high/low that must be broken to trigger a MM signal after consolidation. 🎨 Style Tab The Style tab allows users to customize the visual appearance of the indicator on the chart: Trend SMA: Displays the long-term SMA line used for trend filtering. BTB Long/Short Level: Displays the exact price level of the Donchian Channel breakout when a BTB signal is active (helps visualize the retest point). Signal Shapes: Allows customization of the color, size, and style of the shapes for Buy/Sell signals for MM, SP2L, and BTB individually. ⚠️ Disclaimer (Liability Waiver) This indicator is intended for educational and analytical purposes only. The signals generated by this combination of strategies are based on historical price data and technical analysis principles. Trading involves substantial risk, and past performance is not indicative of future results. Users must conduct their own thorough research (due diligence) and analysis before making any trading decisions. The indicator serves as a supplementary tool and should not be the sole basis for entering or exiting any financial market position. You are solely responsible for all trading decisions and risks taken.
Chỉ báo Pine Script®
của shadi1982iphone
Ghost Super EMAGhost Super EMA: Dynamic Dual-Filter Trend System Indicator Overview The GHOST SUPER EMA is a robust trend-following indicator designed to give traders a comprehensive view of trend direction, volatility, and bias. It achieves this by combining a unique mashup of two distinct Supertrend bands with a single Exponential Moving Average (EMA). The result is a triple-layered visualization of the market's structure: the two Supertrend bands form a Dynamic Cloud for visual support/resistance, and the EMA provides a crucial speed confirmation filter. Core Components & Technical Justification The core of this indicator functions powerfully on the current chart timeframe when the Timeframe input is left blank. The components are combined to create a unique, layered filtration system: Outer Supertrend (Factor 3.35): This is the Macro-Trend Boundary. Its higher factor creates a slower, wider band that acts as the primary threshold for trend direction, preventing noise-related whipsaws often seen with standard settings. Inner Supertrend (Factor 1.67): This is the Volatility Boundary. Its lower factor makes it quicker and measures current market momentum. It provides an early alert for volatility contraction or expansion within the established macro-trend. Supertrend Cloud: The visual area between the two Supertrend bands represents a Dynamic Support/Resistance Zone. The cloud's width reflects market volatility. Price trading within this zone signals potential consolidation or momentum loss. Its color is determined by the Close price relative to the Outer Supertrend. EMA (Length 20): This is the Speed Confirmation Filter. A classic trend measurement, its color (Green/Red) serves as an independent velocity check, validating the primary trend signal from the Supertrend Cloud. Trading Signals and Confirmation A confirmed trading bias requires the simultaneous alignment of both the Cloud and the EMA: 🟢 Bullish Confirmation (Go Long): The Supertrend Cloud is Green (Price above Outer ST) AND the EMA is Green (Price above EMA). 🔴 Bearish Confirmation (Go Short): The Supertrend Cloud is Red (Price below Outer ST) AND the EMA is Red (Price below EMA). Optional Advanced Filtering: Multi-Timeframe (MTF) Tool The Timeframe input is optional and serves as an advanced filter for obtaining market context. Function: By entering a Higher Timeframe (HTF) value (e.g., entering "4H" or "D"), the indicator uses the request.security() function to fetch all three components (Dual Supertrend and EMA) from that stable, larger timeframe. Utility: This anchors trading decisions to the macro-trend, filtering out lower-timeframe noise and false signals. Traders can ensure their entries on a fast chart (e.g., 5-minute) are aligned with the dominant trend of the chosen higher timeframe (e.g., 1-hour). If the input is left blank, the indicator runs on the current chart's timeframe. Customizable Settings The following inputs are available for user configuration: ATR Length: Period for Average True Range calculation (Default: 10). Supertrend Factor 1: Factor for the Outer (Slow) Supertrend (Default: 3.35). Supertrend Factor 2: Factor for the Inner (Fast) Supertrend (Default: 1.67). EMA Length: Period for the Exponential Moving Average (Default: 20). Timeframe: Optional MTF input. Leave blank for current chart timeframe (Default: ""). Disclaimer: Past performance is not indicative of future results. This indicator is a tool for technical analysis and should not be used as the sole basis for trading decisions.
Chỉ báo Pine Script®
của ravi_matrix
Dual Session Range Boxes with FIB Lines█ OVERVIEW The Dual Session Range Boxes with FIB Lines indicator is a powerful tool for identifying and visualizing Range Breakout or Inside Boxes Strategy setups with dual session tracking, customizable Fibonacci extensions, and trade zone levels. Perfect for traders who focus on session-based strategies across multiple markets. █ FEATURES ◆ DUAL SESSION RANGES - Range 1: Defines the Range (ORB) based on a specific time window - Range 2: Extends the Range levels throughout a second session for trade management - Both ranges can be independently configured with preset sessions or custom times ◆ SESSION PRESETS - Tokyo Session (00:00 - 09:00) - London Session (08:00 - 17:00) - New York Session (14:00 - 21:00) - Pre Market Session (10:00 - 15:30) - Custom Time: Define your own session windows ◆ FIBONACCI EXTENSION LEVELS - Automatically calculated from Range 1 High/Low - Buy Side Levels: Projected above the range (green) - Sell Side Levels: Projected below the range (red) - 10 customizable Fib levels with individual on/off toggles: - 23.6%, 38.2%, 50%, 61.8%, 78.6%, 100%, 127.2%, 161.8%, 200%, 261.8% - Special color highlighting for key levels (50%, 100%, 200%) - All percentage values are fully editable ◆ INSIDE TRADE ZONES - Two horizontal lines drawn inside the Range 1 box - Configurable percentage from High/Low (default: 10%) - Helps identify premium/discount zones within the range ◆ LABELS & DISPLAY OPTIONS - Show/hide price values on labels - Show/hide percentage values on labels - Adjustable label size (Tiny, Small, Normal, Large, Huge) - Configurable label offset (distance above lines) - Multiple rounding options for price display: - 0.25 (quarter points - ideal for indices) - 0.1 (tenth points) - 0.01 (two decimals) ◆ STYLE CUSTOMIZATION - Independent fill and border colors for both ranges - Adjustable border width (1-5) - Line style options: Solid, Dashed, Dotted - Separate color settings for: - Buy side Fibonacci levels - Sell side Fibonacci levels - Trade zone lines - Special levels (50%, 100%, 200%) ◆ HISTORICAL DATA CONTROL - Toggle to show/hide historical sessions - Current session always remains visible - Clean chart view when analyzing only the active session █ HOW TO USE 1. Set your timezone in General settings 2. Configure Range 1 to capture your desired Opening Range period 3. Configure Range 2 to define how long levels should extend 4. Adjust Fibonacci levels based on your trading strategy 5. Use Trade Zones to identify key areas within the range 6. Toggle historical data on/off based on your analysis needs █ USE CASES - Opening Range Breakout (ORB) strategies - Session-based trading (London, New York, Tokyo, Pre-Market) - Fibonacci extension targets for breakout trades - Identifying support/resistance from session ranges - Multi-session analysis and confluence zones █ NOTES - Indicator works on timeframes lower than Daily - All times are based on the selected timezone setting - Range 2 only activates after Range 1 completes - Fibonacci levels extend from Range 1 start to Range 2 end Let me know if you like to have any enhancements. Leave a like if you like it!
Chỉ báo Pine Script®
của rieploliver
KIMATIX INFOS – CoreKIMATIX INFOS – Core is a professional trend and entry framework designed to identify market regime shifts, confirm directional bias, and generate high-probability trade signals. This system blends volume flow, higher-timeframe directional context, and momentum behavior to detect genuine trend transitions while filtering out chop and noise. Trend phases are visualized through an adaptive channel, and trade signals only trigger when structure, bias, and momentum align. The indicator displays: Validated trend phases via dynamic trend channels Long/Short bias based on delta flow and directional structure Hybrid entry signals combining momentum, structure, and trend Visual signals for the most recent trend shifts Built for traders who want clean trend entries, controlled pullback timing, or early trend reversal detection. Works as a standalone tool or as a modular core logic inside automated systems. Key Features • Trend filter to separate trending vs. sideways markets • Adaptive channel acting as dynamic support/resistance • Hybrid signal engine that activates only with confirmed trend context • Arrow markers displaying the latest trend initiations • Ready-to-use alert conditions for automatic signaling Benefits for Traders • Avoids chop and false breakouts • Captures impulsive directional movement precisely • Provides clear market direction and real-time validation • Suitable for scalpers, day traders, and swing traders • Supports institutional logic
Chỉ báo Pine Script®
của kimatixtrading
NQ DDNQ DD - Day Displacement Bands This indicator displays dynamic upper and lower bands designed specifically for NQ (Nasdaq-100 E-mini) futures contracts, including their micro variants (MNQ). The bands are plotted as blue circles that update at the start of each new trading session, providing key reference levels for intraday trading. These levels help traders identify potential areas of price expansion and contraction throughout the trading day.
Chỉ báo Pine Script®
của RocketTex
1
Simple Multi VWAPSimple Multi VWAP - Release Notes Overview **Simple Multi VWAP** is a powerful Volume Weighted Average Price (VWAP) indicator that allows you to display up to **four independent VWAP lines** simultaneously on your chart, each with its own customisable anchor period. This provides traders with a comprehensive view of volume-weighted price levels across different timeframes, enabling better analysis of price action and support/resistance levels. Key Features Multiple VWAP Lines - Display up to **4 independent VWAP lines** on a single chart - Each VWAP can be individually enabled or disabled - Each VWAP maintains its own anchor period independently Flexible Anchor Periods Choose from **10 different anchor periods** for each VWAP: - **Session** - Resets daily - **Week** - Resets weekly - **Month** - Resets monthly - **Quarter** - Resets quarterly - **Year** - Resets annually - **Decade** - Resets every 10 years - **Century** - Resets every 100 years - **Earnings** - Resets on earnings announcements - **Dividends** - Resets on dividend payments - **Splits** - Resets on stock splits Native Styling Support - Full integration with TradingView's native style dialog - Right-click any VWAP line to customise: - Colour - Line style (solid, dashed, dotted, etc.) - Line thickness - Opacity - Default colours provided for easy identification: - **VWAP #1**: Orange (#f19d37) - **VWAP #2**: Purple (#7859bc) - **VWAP #3**: Red (#df484b) - **VWAP #4**: Cyan (#54b9d1) Global Settings - **Source**: Choose the price source (default: Close) - **Offset**: Shift VWAP lines forward/backward in time - **Hide on 1D or Above**: Automatically hide VWAPs on daily or higher timeframes How to Use Basic Setup 1. **Add the Indicator**: Search for "Simple Multi VWAP" in TradingView's indicator library 2. **Enable VWAPs**: Check the boxes next to the VWAPs you want to display 3. **Select Anchor Periods**: Choose the anchor period for each enabled VWAP using the dropdown next to each VWAP toggle 4. **Customise Styling**: Right-click any VWAP line → "Style" to customise appearance Recommended Configurations Intraday Trading - **VWAP #1**: Session (daily reset) - **VWAP #2**: Week (weekly reset) - **VWAP #3**: Month (monthly reset) Swing Trading - **VWAP #1**: Week (weekly reset) - **VWAP #2**: Month (monthly reset) - **VWAP #3**: Quarter (quarterly reset) Long-term Analysis - **VWAP #1**: Month (monthly reset) - **VWAP #2**: Quarter (quarterly reset) - **VWAP #3**: Year (yearly reset) - **VWAP #4**: Decade (decade reset) Input Settings Global Settings - **Source**: Price source for all VWAP calculations (default: Close) - **Offset**: Number of bars to shift the VWAP lines (default: 0) - **Hide VWAP on 1D or Above**: Toggle to hide all VWAPs on daily/weekly/monthly charts VWAP Settings Each VWAP has two settings displayed on the same line: - **Enable Toggle**: Checkbox to show/hide the VWAP line (labelled as "VWAP#1", "VWAP#2", etc.) - **Anchor Period**: Dropdown to select the reset period (labelled as "---> Anchor Period") *Note: All VWAP settings are grouped under a single "VWAPs" group for easy organisation.* Technical Details Calculation Method The indicator uses TradingView's built-in `ta.vwap()` function, which calculates: **VWAP** = Σ(Price × Volume) / Σ(Volume) The calculation resets based on the selected anchor period, ensuring accurate volume-weighted averages for each timeframe. Event-Based Anchors For Earnings, Dividends, and Splits anchors, the indicator uses TradingView's data requests to detect these events automatically, ensuring precise reset points. Use Cases Support and Resistance Levels Multiple VWAPs help identify key support and resistance zones across different timeframes. Price often respects these levels, making them valuable for entry and exit decisions. Trend Analysis Compare price action against multiple VWAPs to gauge trend strength: - Price above all VWAPs = Strong uptrend - Price below all VWAPs = Strong downtrend - Mixed positioning = Consolidation or trend change Mean Reversion When price deviates significantly from VWAP, it may indicate overextension and potential mean reversion opportunities. Entry/Exit Signals - **Long Entry**: Price crosses above VWAP with volume confirmation - **Short Entry**: Price crosses below VWAP with volume confirmation - **Exit**: Price returns to VWAP after a significant move Tips & Best Practices 1. **Start Simple**: Begin with 1-2 VWAPs to avoid chart clutter 2. **Match Timeframes**: Use anchor periods that align with your trading timeframe 3. **Combine with Volume**: VWAP works best when combined with volume analysis 4. **Use Multiple Timeframes**: Apply the indicator to multiple chart timeframes for confirmation 5. **Customise Colours**: Use distinct colours for each VWAP to easily identify them Notes - The indicator requires volume data to function properly - VWAP calculations are most accurate on intraday charts - Event-based anchors (Earnings, Dividends, Splits) require symbol data availability - All VWAPs share the same source input for consistency Version Information **Current Version**: 1.0.0
Chỉ báo Pine Script®
của racy_1
ssdv%Are you tired of drawing random boxes on your chart that don’t actually correlate to price? This indicator solves that. It’s a Session-Based Standard Deviation Percentage Calculator designed to show you where price has actually reacted—and where it’s statistically likely to react again. Just select the session you’re trading as Session 1 and the previous session as Session -1. The script automatically builds a live data pool from those sessions, calculates the true standard-deviation-based percentage levels, and dynamically adjusts as new data comes in. The result? Clean, adaptive reversal zones grounded in real volatility, not guesswork—so you can finally stop drawing boxes and start trading price with precision.
Chỉ báo Pine Script®
của natea5978
Mid-term Valuation Indicator | MiesOnChartsMedium-Term Valuation Indicator This medium-term valuation indicator integrates multiple valuation metrics to assist investors in identifying oversold and overbought market conditions with greater precision. How it works: This indicator uses an average of multiple valuation indicators like technical mean reversion, sentiment and on-chain indicators. Its core innovation is an adaptive z-score aggregation that normalizes these diverse inputs (e.g., RSI for mean reversion or NUPL for on-chain sentiment) into a unified score, minimizing noise from isolated metrics and providing a more reliable valuation snapshot than traditional single-indicator tools. All included indicators have individual flexible metrics, allowing users to customize them as needed. Additionally, the script uses color-coding based on the aggregation of z-scores, which aids in visualizing whether the market is overvalued or undervalued. How to Interpret: The indicator employs adaptive standard deviation bands to define extreme market zones. The red band signals a strongly overbought condition, while the green band indicates a significantly oversold condition. How to Apply: Investors can leverage these extreme levels as strategic points for taking profits or implementing dollar-cost averaging (DCA) strategies, optimizing entry and exit decisions in the market. Disclaimer: NOT Financial advice. Past performance is not indicative of future results. No trading strategy can guarantee success in financial markets.
Chỉ báo Pine Script®
của MiesOnCharts
CRT Inside Hunter + FVG (Final Fusion)CRT Inside Hunter + FVG (Final Fusion) This indicator automatically detects Inside Bar → CRT (Consolidation – Range – Trap) structures and generates LONG / SHORT BAM breakout signals whenever the mother bar is violated. It also includes optional Fair Value Gap (FVG) confirmation. 🔍 1. Inside Bar → Mother Bar Detection Automatically identifies inside bar sequences. Creates the Mother Bar with High / Low boundaries. Draws Q1 – Mid – Q3 levels as visual guidance. Auto-removes CRT structure after a user-defined number of bars. 🚨 2. BAM Breakout Signals Breakout events trigger automatic trade signals: Upper violation → SHORT signal Lower violation → LONG signal Signals are displayed as labels and fully support alerts. 🟦 3. FVG (Fair Value Gap) Confirmation Optional FVG detection mode: Automatically marks Demand and Supply FVG zones. If the price touches an FVG at the breakout moment, the signal becomes FVG-Confirmed. 🎨 4. Additional Features Inside bars highlighted for clarity. Clean, minimal drawing system. All drawings reset daily for maximum chart hygiene. This tool combines liquidity, imbalance, breakout logic and provides a powerful structure for scalping and intraday trading.
Chỉ báo Pine Script®
của by_gokcebey
Box TheoryBox Theory – Description This indicator is based on the popular “Box Theory” concept, where the previous session’s High–Low range acts as the most important structure for the next session. Traders use this because the market often reacts to the same areas where liquidity, orders, and imbalances were created in the prior session. At every new session open, the indicator automatically records: Previous High Previous Low Middle (50% level) These three levels form a box, which becomes your roadmap for the new session. This method is widely used because it highlights where most reversals, sweeps, and reactions occur—without needing any extra indicators. How the Zones Are Calculated Previous High The highest price of the last session. This forms the top edge, which acts as resistance and the basis for the Sell Zone. Previous Low The lowest price of the last session. This forms the bottom edge, acting as support and the basis for the Buy Zone. Middle Line (50% Level) The exact midpoint between High and Low. This is the fair-value zone, where price often consolidates and becomes directionless. No signals are triggered near the middle, because trades taken here historically have low accuracy. Buy Zone (Green Area) The lower part of the box. Price often reacts here because this area held buyers in the previous session. When price enters this green zone inside the box, the indicator can show a Buy Zone label. Sell Zone (Red Area) The upper part of the box. Price commonly rejects here because this area acted as resistance previously. When price enters this red zone inside the box, the indicator can show a Sell Zone label. How Zone Size Is Set (Sensitivity %) You can adjust how big the Buy/Sell zones are using the Sensitivity (%) input. Lower % → Smaller zones → More precise signals Higher % → Larger zones → Signals appear earlier and from farther away Formula: Zone Size = (Previous High − Previous Low) × (Sensitivity % ÷ 100) This lets you customize how tight or how early your signals appear. Inside-Box Only Logic The indicator only works inside the previous session’s range. If price breaks above the previous High → No sell signal If price breaks below the previous Low → No buy signal This avoids false signals during breakouts or trending markets. Alerts The indicator includes two alerts: Buy Zone Alert → Triggers when price enters the Buy Zone Sell Zone Alert → Triggers when price enters the Sell Zone Just enable them in TradingView’s alert panel.
Chỉ báo Pine Script®
của ebecihalil
1
Bollinger Bands SMThis script plots four custom Bollinger Band envelopes on price to map volatility, trend and extremes on a single chart. What it shows BB Set 1 – 50-length, 1.25σ (cyan/red) Short–to–medium-term volatility channel. Good for spotting squeezes, early breakouts and pullbacks in the active trend. BB Set 2 – 200-length, 1.25σ (lime/yellow) Higher-timeframe “trend envelope”. When price rides the upper band the trend is strong; closes below the lower band often signal deeper corrections. BB Set 3 – 14-length, 3.2σ (white/blue, green fill) Fast, very wide band for short-term volatility spikes. Tags of these outer bands highlight overextended moves that often mean-revert. BB Set 4 – 200-length, 5σ (white/red, purple fill) Extreme long-term volatility boundary. Price reaching this zone is rare and can mark exhaustion, blow-off moves or panic washes. How I use it Look for squeezes where bands contract tightly before large moves. Watch for confluence when multiple bands line up as support/resistance. Treat outer band touches as risk zones, not automatic reversal signals – wait for confirmation from structure or your own system. This is a visual tool to understand volatility and trend context, not a standalone buy/sell system and not financial advice.
Chỉ báo Pine Script®
của SM2K
Daily Range Box (RIC) V0.2This update enhances the "Daily Range Box" indicator by adding user-configurable inputs for colors and line styles. Users can now customize the box border color and the midline color independently through dedicated color picker inputs. Additionally, separate dropdown menus allow selection of line styles (Solid, Dashed, or Dotted) for both the box border and the midline, enabling personalized visualization while maintaining the core functionality of drawing daily range boxes with midlines across all timeframes.
Chỉ báo Pine Script®
của Richard_1O1
Indicator ***TuYa*** V8.2 – HH/HL MTF + Peak Mid ZoneIndicator TuYa V8.0 – HH/HL MTF + Peak Mid Zone TuYa V8.0 combines multi-timeframe market structure with a Peak Reaction midline to create clean, rule-based reversal and trend entries – designed primarily for 1-minute execution with 1-hour bias. 🧠 Core Concept This indicator fuses three ideas: HTF Peak Reaction Midline (1H) Uses a Peak Reaction style logic on the higher timeframe (HTF, default: 1H). Identifies a reaction high and reaction low, then calculates their midpoint → the Peak Mid Zone. This midline acts as a dynamic sentiment divider (above = premium / below = discount). Multi-Timeframe HH/HL/LH/LL Structure HTF structure (1H): detects HH, HL, LH, LL using pivot highs/lows. LTF structure (1m): detects HH, HL, LH, LL on the execution timeframe (chart TF, intended for 1m). HTF → LTF Confirmation Window After a 1H structure event (HH, HL, LL, LH), the indicator opens a confirmation window of up to N LTF candles (default: 10 x 1m bars). Within that window, the required 1m structure event must occur to confirm an entry. 🎯 Signal Logic All entries are generated on the LTF (e.g. 1m chart), using HTF (e.g. 1H) bias + Peak Mid Zone: 1️⃣ Price ABOVE Peak Mid (Bullish premium zone) Reversal SELL HTF: HH (Higher High) Within N 1m bars: LTF HH → SELL signal (fading HTF strength near premium) Trend/Bullish BUY HTF: HL (Higher Low) Within N 1m bars: LTF LL → BUY signal (buying dips in an uptrend above midline) 2️⃣ Price BELOW Peak Mid (Bearish discount zone) Reversal BUY HTF: LL (Lower Low) Within N 1m bars: LTF LL → BUY signal (catching potential reversal from discount) Trend/Bearish SELL HTF: LH (Lower High) Within N 1m bars: LTF HH → SELL signal (shorting strength in a downtrend below midline) Signals are plotted as small BUY/SELL triangles on the chart and exposed via alert conditions. 🧾 Filters & Options ⏳ HTF → LTF Delay Window Input: “Max 1m bars after HTF trigger” (default: 10) After a 1H HH/HL/LL/LH event, the indicator waits up to N LTF candles for the matching 1m structure pattern. If no match occurs within the window, no signal is generated. 📉 RSI No-Trade Zone (HTF) Toggle: Use RSI no-trade zone Inputs: RSI Length (HTF) No-trade lower bound (default 45) No-trade upper bound (default 65) If HTF RSI is inside the defined band (e.g. 45–65), signals are blocked (no-trade regime), helping to avoid noisy mid-range conditions. You can turn this filter ON/OFF and adjust the band dynamically. 🧱 5m OB / Direction Filter (Optional) Toggle: Use 5m OB direction filter Timeframe: Configurable (default: 5m). Uses a simple directional proxy on the OB timeframe: For BUY signals → require a bullish candle on OB timeframe. For SELL signals → require a bearish candle on OB timeframe. When enabled, this adds an extra layer of confluence by aligning entries with the short-term directional context. ⚙️ Key Inputs (Summary) Timeframes HTF (Peak Reaction & Structure): default 60 (1H) Peak Reaction Lookback bars (HTF) ATR multiplier for zones Show/Hide Peak Mid line Structure Pivot left/right bars (for HH/HL/LH/LL swings) Toggle structure labels (HTF & LTF) Confirmation Max LTF bars after HTF trigger (default 10, fully configurable) RSI Filter Use filter (on/off) RSI length No-trade range (low/high) 5m OB Filter Use filter (on/off) OB timeframe (default 5m) 📡 Alerts & Automation The script includes alertconditions for both BUY and SELL signals, with JSON-formatted alert messages suitable for routing to external bridges (e.g. bots, MT5/MT4, n8n, etc.). Each alert includes: Symbol Side (BUY / SELL) Price / Entry SL & TP placeholders (from hidden plots, ready to be wired to your own logic) Time Performance tag CommentCode (for strategy/type tagging on the receiver side) You can attach these alerts to a webhook and let your execution engine handle SL/TP and order management. 📌 How to Use Attach the indicator to a 1-minute chart. Set HTF timeframe to 60 (or your preferred higher timeframe). Optionally enable: RSI regime filter 5m OB direction filter Watch for: Price relative to the Peak Mid line BUY/SELL triangles that respect HTF structure + LTF confirmation + filters. For automation, create alerts using the built-in conditions and your preferred JSON alert template. ⚠️ Disclaimer This tool is for educational and informational purposes only. It is not financial advice and does not guarantee profits. Always test thoroughly in replay / paper trading before using with live funds, and trade at your own risk.
Chỉ báo Pine Script®
của tuya_xtream
Vegas plus by stanleyThis Pine Script implements a comprehensive trend-following strategy known popularly as the **Vegas Tunnel Method**. It combines multiple Exponential Moving Averages (EMAs) to define trends, pullbacks, and breakouts. Here is a step-by-step walkthrough of how the code works, broken down by its components and logic. --- ### 1. The Anatomy (The Indicators) The script uses three distinct groups of Moving Averages to define the market structure. #### A. The Fast EMAs (The Trigger & Exit) * **EMA 12 (Signal):** The fastest line. It is used to trigger entries (crossing the tunnel). * **EMA 21 (Exit):** Used as a trailing stop. If the price crosses this line against your trade, the script signals an exit. * **EMA 55 (Filter):** A medium-term filter, often used visually to gauge trend health. #### B. The "Hero" Tunnel (The Action Zone) * **EMAs 144 & 169 & 200:** These creates the main "Tunnel." * **Function:** This acts as dynamic Support and Resistance. * **Bullish:** If the 144 (Top) is above the 200 (Bottom), the tunnel is painted Blue. * **Bearish:** If the 144 is below the 200, it is painted Red. #### C. The "Anchor" Tunnel (The Deep Trend) * **EMAs 576 & 676:** This creates a massive, slow-moving background tunnel. * **Function:** It tells you the long-term trend. Generally, you only want to take Buy signals if price is above this Anchor, though the script logic focuses primarily on the Hero tunnel for triggers. --- ### 2. State Memory (`var` Variables) This is a sophisticated part of the script. It uses `var` variables to "remember" where the price was in the past. * `originPrice`: Remembers if the price was last seen **Above** (1) or **Below** (-1) the tunnel. * `originEMA`: Remembers if the EMA 12 was last seen **Above** (1) or **Below** (-1) the tunnel. **Why is this needed?** To distinguish between a **Breakout** (crossing from Bear to Bull) and a **Pullback** (already Bull, dipped into tunnel, and coming back out). --- ### 3. The Four Entry Triggers The script looks for four specific scenarios to generate a Buy or Sell signal. You can turn these on/off in the settings. #### Trigger 1: Price U-Turn (Trend Continuation) * **Logic:** The Price was *already* above the tunnel (`originPrice == 1`), dipped down, and is now crossing back up (`crossover`). * **Meaning:** This is a classic "Buy the Dip" signal within an existing trend. #### Trigger 2: EMA U-Turn (Lagging Confirmation) * **Logic:** Similar to Trigger 1, but uses the **EMA 12** line instead of the Price candle. * **Meaning:** This is safer but slower. It waits for the average price to curl back out of the tunnel. #### Trigger 3: Breakthrough (Momentum Shift) * **Logic:** The EMA 12 was previously *below* the tunnel (`originEMA == -1`) and has just crossed *above* it (`crossover`). * **Meaning:** This is a Trend Reversal signal. The market has shifted from Bearish to Bullish. #### Trigger 4: Wick Rejection (Touch & Go) * **Logic:** 1. Price is generally above the tunnel. 2. The `Low` of the current candle touches the tunnel. 3. The `Low` of the *previous* candle did NOT touch the tunnel. 4. The candle closes *outside* (above) the tunnel. * **Meaning:** The price tested the support zone and was immediately rejected (bounced off), leaving a wick. --- ### 4. Trade Management (State Machine) The script uses a variable called `tradeState` to manage signals so they don't spam your chart. * `tradeState = 0`: Flat (No position). * `tradeState = 1`: Long. * `tradeState = -1`: Short. **The Rules:** 1. **Entry:** If `validLong` is triggered AND `tradeState` is not already 1 -> Change state to 1 (Long) and plot a **BUY** label. 2. **Holding:** If you are already in State 1, the script ignores new Buy signals. 3. **Exit:** If `tradeState` is 1 AND price closes below EMA 21 -> Change state to 0 (Flat) and plot an **Exit L** label. --- ### 5. Visual Summary * **Green Label:** Buy Signal (Long Entry). * **Red Label:** Sell Signal (Short Entry). * **Grey X:** Exit Signal (Close the position). * **Blue/Red Tunnel:** The "Hero" tunnel (144/169/200). * **Grey Background Tunnel:** The "Anchor" tunnel (576/676). ### How to read the signals: You are looking for the price to interact with the **Hero Tunnel** (the thinner, brighter one). 1. **Trend:** Look at the slope of the Anchor (thick grey) tunnel. 2. **Setup:** Wait for price to come back to the Hero Tunnel. 3. **Trigger:** Wait for a **Green Label**. This means the price dipped into the tunnel and is now blasting out (U-Turn), or has rejected the tunnel (Wick), or has broken through a new trend (Breakthrough). 4. **Exit:** Close the trade when the **Grey X** appears (Price crosses the EMA 21).
Chỉ báo Pine Script®
của parson433400