Bắt đầu

ATR

ATR 1Day Upper Lower BoundsThis script is useful as a guide to get into positions. The 1day ATR has upper and lower bounds, however its typically used to determine if a trend is long or short. And the trend reverses when the price action close crosses the directional trend limit. This script is different in that it always shows both the upper and lower ATR ranges. Also, its default time resolution is the 1day and this has been selected for BTC, as the chart shows when this indicator can be useful. The indicator overlays anytime frame equal to or lower than 1 day. The 1 Day ATR upper and lower limits are a good guide. If the price action crosses the 1 Day ATR, there is a reasonable chance the price is likely to correct to be within the 1Day ATR bounds. So, if the price goes above the top ATR line, consider getting into a short position. Similarly, if the price goes below the lower ATR line, consider getting into a long position. If you look at the attached chart, there are several times when this is a very good trading signal for BTC.
Chỉ báo Pine Script®
của MoonFlag
1
Baus BandsThe Baus Bands are a simplified version of another one of my trend following indicators, the Neapolitan Bands. This version only shows the trend trading zones in green and red. An additional 21 EMA with an ATR band was added as part of my own trend trading rules using these bands. How do I read this indicator? Is the blue band between and not touching the green or red clouds? The condition is ranging. Is the blue band touching the green cloud? The condition is a bullish trend. Is the blue band touching the red cloud? The condition is a bearish trend. The trend trading rules are exactly the same as the default Neapolitans, but include an extra condition. A trend has started once 2 conditions are met: Price has entered either trending cloud. The 21 EMA ATR band in blue is within the same cloud. With those conditions met, if you expect the trend to continue, trade pull-backs to the blue band in the direction of the trending cloud. Isn't this just a 21 EMA trading pull-backs strategy? No. The 21 EMA alone is not sufficient in my opinion to define a range or trend technically. Always buying the 21 EMA pull-back, especially in a range, is not a great strategy by itself unless you've already identified price as trending. Baus Bands adds that trend identification. Why make this? Baus Bands show the conditions I personally use for catching trends and identifying ranges with these indicators, and shows only the information I use. What's the purpose of the ATR band around the 21 EMA? Sometimes price will open and close below the 21 EMA and cause some technical analysts will say the trend is over. I added the ATR specifically to get a volatility based, upper and lower bound range around the 21 EMA. that way I have an acceptable price range where price could move past the 21 EMA and still keep a trend valid using similar rules. I then saw that so long this ATR band (not the 21 EMA itself) was touching those trending clouds, then the trend has a good chance of continuing as long as that was true.
Chỉ báo Pine Script®
của joebaus
3
Trending/RangingThis script is a useful tool to use to identify the current market. It includes three other indicators: 1. ATR (combined with a SMA of the ATR) 2. ADX 3. RSI It allows you to filter for when the market is trending vs. when the market is ranging by using any of the three indicators. You can also combine them to find extremely good trends to trade, or if you're a channel trader, identify when you wouldn't want to trade. This indicator also includes a time frame setting to allow you to ZOOM OUT and explore the long term trend of the security you are trading. I highly recommend using this indicator as a filter for when you enter a trade or not depending on the system you like to trade.
Chỉ báo Pine Script®
của JonathanMcFall
8
ATR Pip Control█ OVERVIEW Here is a script based on the ATR but which unlike the traditional ATR using a Multiplier, here we use a signal filter by the Exchange of Prices between Ticks. The more you increase the value, the more the parasitic signals will be filtered. █ HOW TO INTERPRET? • The signals are represented on the chart by "Buy" (Green) and "Sell" (Red) Labels. • Pip Channel Control : Filters ATR Signals by the Exchange of Prices between Ticks. 0 = Disabled. • Pip Length : Length of the Pip Channel. Depending on the Markets, the value can differ from 2 to 20 for Futures, Forex, CFD... (But can go up to 5000 or more for Cryptos.) 0 = Disabled. • Local High/Low : Local High/Low lines can be used as Stop Loss/Take Profit Zone. • you have the option to display or not the Unconfirmed Signals on the Chart. (They will also be displayed with "Buy" and "Sell" Labels but being transparent). • The indicator works on all Timeframes and all types of markets. • NO THE INDICATOR DOESN'T REPAINT. █ ALERTS Here is the list of Alerts available : •ATR Buy (Unconfirmed) •ATR Buy Condition! •ATR Sell (Unconfirmed) •ATR Sell Condition! Please note that it is essential to always choose "Once per bar" (and NOT the "Once per bar close"!) option whenever you want to place an Alert.
Chỉ báo Pine Script®
của RickSimpson
21
ATR with EOM and VORTEXThis is a strategy, designed for long trends for stock and crypto market. Its made of ATR for volatility, EOM for volume and VORTEX for the trend direction. In this case on the ATR, I applied an EMA to check if current position is above the EMA -> bull trend, below ema -> bear trend For EOM I am using the positive and negative value scale, if its positive we are in a bull movement, otherwise a bear movement. Lastly for VORTEX, I took the min and max, and made an average, after that I am using the average and compare it with 1 value. Above 1 -> bull, belowe 1-> bear. This strategy only goes long. If you have any questions, let me know.
Chiến lược Pine Script®
của SoftKill21
1
ATR For Stop Loss (Overlay)This script is an enhancement of ATR Indicator. It is used to determine the stop loss position by using the ATR indicator, in conjunction with the low of the candle. Formula = Stop Loss = Lowest(Lowest Length) - (ATR Multiplier * ATR (Smoothing, Length)) However, the user needs to manually identify the swing low for a better stop loss placement. Parameter Information : - Length : Period to calculate the average true range. - Smoothing : The method used for averaging. - ATR Multiplier : Multiplier factor to determine the Stop Loss from the lowest reference point. (1 ATR Multiplier means the stop loss would be = Low - ATR) - Lowest Length : A total number of candle to determine the lowest reference point. (1 means only using the latest candle's low as a lowest reference point) Have fun and good luck!
Chỉ báo Pine Script®
của hanssidharta
Trend Surfers - Premium Breakout + AlertsTrend Surfers - Premium Breakout Strategy with Alerts I am happy today to release the first free Trend Surfers complete Breakout Strategy! The strategy includes: Entry for Long and Short Stoploss Position Size Exit Signal Risk Management Feature How the strategy works This is a Trend Following strategy. The strategy will have drawdowns, but they will be way smaller than what you would go through with buy and old. As a Trend Following strategy, we will buy on strength, when a breakout occurs. And sell on weakness. The strategy includes a FIX Stoploss determined by an ATR multiple and a trailing Stoploss/Takeprofit also determined by an ATR multiple. You can also manage your risk by entering the maximum % you are willing to risk on every trade. Additionally, there is an option to enter how many pairs you will be trading with the strategy. This will change your position size in order to make sure that you have enough funds to trade all your favorite pairs. Use the strategy with alerts This strategy is alert-ready. All you have to do is: Go on a pair you would like to trade Create an alert Select the strategy as a Trigger Wait for new orders to be sent to you Every Entry (Long/Short) will include: Market Entry (Enter position NOW!) Stoploss price Position Size Leverage * If you do not wish to use leverage, you can multiply the Position Size by the Leverage. But doing that, you might end up with a position greater than your equity. Trading on Futures is better in order to have accurate risk management. Exit signals: When you receive an exit signal, you need to close the position ASAP. If you want to keep your results as close as possible to the backtest results, you need to execute quickly and follow what the strategy is telling you. Do not try to outsmart the strategy Leave your emotion out of trading! If you trust the strategy, you will have way better returns than if you try to outsmart it. Follow each signal you receive even if it doesn't seem logical at the moment. Become a machine that executes. Don't look at fundamentals. Follow the trend! Trust the strategy! I hope you enjoy it!
Chiến lược Pine Script®
của TrendSurfersSignals
25
Crypto Risk Buddy: Position Size, SL & TP System [UTS] Crypto Risk Buddy Position Size, Stop Loss & Take Profit System The ultimate system to calculate trading risk on crypto assets. ₿ Cyptocurrencies Position Sizing De-risk possible drawdown by calculating a proper position size. Define your risk percent based on your net value Freely define your account currency Trade any asset by the customizable Base / Quote currency factor Calculate trading fees Show all information on a customizable data screen Stop Loss Minimize trade risk by calculatig your stop-loss. Percent, Value and Delta display from current price ATR based (Average True Range, modifiable) Custom SL value possible Adjustable Two visual representations on chart Automatically and real-time calculated on screen Take Profit Multiple take-profit levels to ensure not giving back to the market. Up to 3 take profit levels to define ATR based (Average True Range, modifiable) Custom TP values possible Easily customizable Two visual representations on chart Automatically and real-time calculated on screen Currencies Choose an account currency and calculate your risk for every trading pair. USD EUR GBP AUD CAD CHF HKD JPY NOK NZD RUB SEK SGD TRY ZAR BTC (crypto) ETH (crypto) USDT (crypto) BUSD (crypto) USDC (crypto)
Chỉ báo Pine Script®
của UberTradingSystems
2
Bull Market Trend Following StrategyThis Bull Market Trend Following Strategy is perfect for long or short term Crypto or traditional market trading and investing. It is based mainly on the ATR indicator and will therefore adapt to any market conditions and volatility. It has a number of variable options to try and maximise gains, including stop loss and take profit points, and the ability to wait for pullbacks. Please let me know if you find any optimal settings, and don't hesitate to ask any questions I'm always happy to help. Thanks a lot.
Chiến lược Pine Script®
của BlockchainSpecialists
6
Normalized Quantitative Qualitative Estimation nQQENormalized version of Quantitative Qualitative Estimation QQE: Normalized QQE tries to overcome the problems of false signals due to RSI divergences on the original QQE indicator. The main purpose is to determine and ride the trend as far as possible. So users can identify: UPTREND : when nQQE Histogram is GREEN (nQQE is above 10) DOWNTREND : when nQQE Histogram is RED (nQQE is below -10) SIDEWAYS: when nQQE Histogram is YELLOW (nQQE is between -10 and 10) Calculation is very simple; RSI based QQE oscillates between 0-100 nQQE is simply calculated as: nQQE=QQE-50 to make the indicator fluctuate around 0 level to get more accurate signals. Various alarms added. Kıvanç Özbilgiç
Chỉ báo Pine Script®
của KivancOzbilgic
35
Up-Down RangeHere is an attempt to segregate ATR into ATR of up days and down days. While setting trailing stops based on ATR, you probably need to consider more on how an instrument can drop during red days. Hence, ATR of only red days makes more compelling case than overall ATR. Another use case for this kind of indicator may be in options if you are selling puts and calls with the intent of pocketing premiums on expiry. Parameters are as explained below: Range Type : Different range types are tr (True Range) , close (difference between close prices), highlow (difference between high and low of candle) Period : ATR Period Moving Average Type : Moving Average Type for calculating ATR. Two additional types - min and max are added which calculates lowest and highest range in last n bars HideFullAtr : Hides combined ATR if checked.
Chỉ báo Pine Script®
của Trendoscope
2
PG ATR based Stop LossA stoploss system that enables traders to exit with limited loss or even trailing loss. Use the levels of indicator against the candle that has seen signidicant move for running positions and the candle in which a new position is taken. Example : For long Nifty Future at 14990 levels, when Indicator is showing 14820 at bottom on a 30 min chart, 14820 can be used as a stop loss, similarly for short conditions upper values above top of he candle will be followed. For medium term ongoing positions, use the levels marked against candle that offered a major move, or the candles that has put the underlying in a new price zone or range. 15-30 minutes are suitable period for intraday / short term trades. Two hours or day periods can be used for positional trades. **Queries are welcme.**
Chỉ báo Pine Script®
của ipuneet
Risk Management: Position Size & Risk RewardHere is a Risk Management Indicator that calculates stop loss and position sizing based on the volatility of the stock. Most traders use a basic 1 or 2% Risk Rule, where they will not risk more than 1 or 2% of their capital on any one trade. I went further and applied four levels of risk: 0.25%, 0.50%, 1% and 2%. How you apply these different levels of risk is what makes this indicator extremely useful. Here are some common ways to apply this script: • If the stock is extremely volatile and has a better than 50% chance of hitting the stop loss, then risk only 0.25% of your capital on that trade. • If a stock has low volatility and has less than 20% change of hitting the stop loss, then risk 2% of your capital on that trade. • Risking anywhere between 0.25% and 2% is purely based on your intuition and assessment of the market. • If you are on a losing streak and you want to cut back on your position sizing, then lowering the Risk % can help you weather the storm. • If you are on a winning streak and your entries are experiencing a higher level of success, then gradually increase the Risk % to reap bigger profits. • If you want to trade outside the noise of the market or take on more noise/risk, you can adjust the ATR Factor. • … and whatever else you can imagine using it to benefit your trading. The position size is calculated using the Capital and Risk % fields, which is the percentage of your total trading capital (a.k.a net liquidity or Capital at Risk). If you instead want to calculate the position size based on a specific amount of money, then enter the amount in the Custom Risk Amt input box. Any amount greater than 0 in the Custom Risk Amt field will override the values in the Capital and Risk % fields. The stop loss is calculated by using the ATR. The default setting is the 14 RMA, but you can change the length and smoothing of the true range moving average to your liking. Selecting a different length and smoothing affects the stop loss and position size, so choose these values very carefully. The ATR Factor is a multiplier of the ATR. The ATR Factor can be used to adjust the stop loss and move it outside of the market noise. For the more volatile stock, increase the factor to lower the stop loss and reduce the chance of getting stopped out. For stocks with less volatility , you can lower the factor to raise the stop loss and increase position size. Adjusting the ATR Factor can also be useful when you want the stop loss to be at or below key levels of support. The Market Session is the hours the market is open. The Market Session only affects the Opening Range Breakout (ORB) option, so it’s important to change these values if you’re trading the ORB and you’re outside of Eastern Standard Time or you’re trading in a foreign exchange. The ORB is a bonus to the script. When enabled, the indicator will only appear in the first green candle of the day (09:30:00 or 09:30 AM EST or the start time specified in Market Session). When using the ORB, the stop loss is based on the spread of the first candle at the Open. The spread is the difference between the High and Low of the green candle. On 1-day or higher timeframes, the indicator will be the spread of the last (or current) candle. The output of the indicator is a label overlaying the chart: 1. ATR (14 RMA x2) – This indicated that the stop loss is determined by the ATR. The x2 is the ATR Factor. If ORB is selected, then the first line will show SPREAD, instead of ATR. 2. Capital – This is your total capital or capital at risk. 3. Risk X% of Capital – The amount you’re risking on a % of the Capital. If a Custom Risk Amt is entered, then Risk Amount will be shown in place of Capital and Risk % of Capital. 4. Entry – The current price. 5. Stop Loss – The stop loss price. 6. -1R – The stop loss price and the amount that will be lost of the stop loss is hit. 7. – These are the target prices, or levels where you will want to take profit. This script is primarily meant for people who are new to active trading and who are looking for a sound risk management strategy based on market volatility . This script can also be used by the more experienced trader who is using a similar system, but also wants to see it applied as an indicator on TradingView. I’m looking forward to maintaining this script and making it better in future revisions. If you want to include or change anything you believe will be a good change or feature, then please contact me in TradingView.
Chỉ báo Pine Script®
của TheDrivenTrader
30
Electrified Aggressive Momentum SignalWhat this can be used for: If you've already decided you want to trade a symbol, this can identify points of momentum alignment. If a strong move has recently happened and you're looking for a change in momentum. How it works: This is a weighted combination of a Stochastic RSI and two modified SuperTrend (ATR Trailing Stop) indicators: The Stochastic RSI signal is based upon aligned momentum and is negated at the overbought and oversold points. The SuperTrend formula uses high and low values for calculation and both fast and slow can be adjusted for sensitivity. Philosophy: Signals have to be useful to humans. If a signal occurs to late, you've missed it. The intent of this indicator is to assist in timing a trade at very short time-frames. It assumes your conviction about a trade already exists, but you are trying to get an optimal entry. Opposing momentum (weak signal) within an uptrend can be a sign that you should wait before entering. The frequency of a signal can indicate the strength of the trend. As the frequency of the aligned signal value decreases so does the reward vs risk.
Chỉ báo Pine Script®
của Electrified
1
ATR + %R Scalping StrategyThe Average True Range is a single line indicator that measures volatility. The indicator was originally developed by J. Welles Wilder to measure the volatility of commodities within the futures market. ATR does not measure price trends or price direction hence %R and Parabolic SAR indicators were added. The strategy enhances standard Average True Range and %R composition with trend confirmation and filters which clear out market noises and manipulations from triggers. The strategy supports traditional and cryptocurrency spot, futures, options and marginal trading exchanges. It works accurately with BTC, USD, USDT, ETH and BNB quote currencies. Best to use with 5 and 15 minutes timeframe charts and Limit orders. The strategy can be and should be configured for each particular asset. You can change filters and risk management settings to receive the most advanced accurate alerts Advantages of this script: Strategy has high profit factor around 30.32 Backtests show high accuracy around 91.18% High Net Profit percentage Low Drawdowns Weak signals are filtered Dynamic Take profit and Stop loss Fast deals around 50 minutes per trade Can be applied to any market and quote currency Easy to configure user interface How to use? 1. Apply strategy to the trading pair your are interested in at 5m or 15m timeframe chart 2. Configure the strategy: change filters values and risk management settings until Strategy tester shows good results according to mathematical expectation 3. Set up a TradingView alert to trigger when strategy conditions are met 4. Strategy will send alerts when to enter and when to exit positions
Chiến lược Pine Script®
của Skyrexio
11